Pull more clk updates from Stephen Boyd:
 "Another set of clk driver updates and fixes for the merge window. The
  driver updates needed more time to bake in linux-next.

  Updates:
   - Support for more clk controllers in Qualcomm SoCs such as SM8350,
     SM8450, SDX75, SC8280XP, and IPQ9574
   - Runtime PM enablement of some more Qualcomm clk controllers
   - Various fixes to Qualcomm clk driver data to use correct clk_ops
     and to check halt bits properly
   - AT91 updates to modernize with clk_parent_data structures

  Fixes:
   - Remove 'syscon' from dt binding fix for ti,j721e-system-controller
   - Fix determine rate in the Tegra driver that got wrecked by the
     refactorting of muxes this merge window"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
  clk: tegra: Avoid calling an uninitialized function
  dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
  clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
  clk: at91: sama7g5: switch to parent_hw and parent_data
  clk: at91: sckc: switch to parent_data/parent_hw
  clk: at91: clk-sam9x60-pll: add support for parent_hw
  clk: at91: clk-utmi: add support for parent_hw
  clk: at91: clk-system: add support for parent_hw
  clk: at91: clk-programmable: add support for parent_hw
  clk: at91: clk-peripheral: add support for parent_hw
  clk: at91: clk-master: add support for parent_hw
  clk: at91: clk-generated: add support for parent_hw
  clk: at91: clk-main: add support for parent_data/parent_hw
  clk: qcom: gcc-sc8280xp: Add runtime PM
  clk: qcom: gpucc-sc8280xp: Add runtime PM
  clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  clk: qcom: gpucc-sm6375: Enable runtime pm
  dt-bindings: clock: sm6375-gpucc: Add VDD_GX
  clk: qcom: gcc-sm6115: Add missing PLL config properties
  clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
  ...

Pull power supply and reset updates from Sebastian Reichel:

 - Add new Qualcomm PMI8998/PM660 SMB2 charger

 - bq256xx: support systems without thermistors

 - cros_pchg: fix peripheral device status after system resume

 - axp20x_usb_power: add support for AXP192

 - qcom-pon: add support for pm8941

 - at91-reset: prepare to expose reset reason to sysfs

 - switch all I2C drivers back to use .probe instead of .probe_new

 - convert some more DT bindings to YAML

 - misc cleanups

* tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller
  dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
  dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
  power: reset: at91-reset: change the power on reason prototype
  power: reset: qcom-pon: add support for pm8941-pon
  dt-bindings: power: reset: qcom-pon: define pm8941-pon
  power: supply: add Qualcomm PMI8998 SMB2 Charger driver
  dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
  power: supply: rt9467: Make charger-enable control as logic level
  power: supply: Switch i2c drivers back to use .probe()
  power: reset: add HAS_IOPORT dependencies
  dt-bindings: power: supply: axp20x: Add AXP192 compatible
  power: supply: axp20x_usb_power: Add support for AXP192
  power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
  power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
  power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
  power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
  power: supply: axp20x_usb_power: Simplify USB current limit handling
  power: supply: hwmon: constify pointers to hwmon_channel_info
  power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed()
  ...

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
   - Add support for Awinic AW20036/AW20054/AW20072 LEDs

  New Device Support:
   - Add support for PMI632 LPG to QCom LPG
   - Add support for PMI8998 to QCom Flash
   - Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC

  New Functionality:
   - Implement the LP55xx Charge Pump
   - Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
   - Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
   - Enable per-pin resolution Pinctrl in LEDs GPIO

  Fix-ups:
   - Allow thread to sleep by switching from spinlock to mutex
   - Add lots of Device Tree bindings / support
   - Adapt relationships / dependencies driven by Kconfig
   - Switch I2C drivers from .probe_new() to .probe()
   - Remove superfluous / duplicate code
   - Replace strlcpy() with strscpy() for efficiency and overflow prevention
   - Staticify various functions
   - Trivial: Fixing coding style
   - Simplify / reduce code

  Bug Fixes:
   - Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
   - Repair race between led_set_brightness(LED_{OFF,FULL})
   - Fix Oops relating to sleeping in critical sections
   - Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
   - Do not leak resources in error handling paths
   - Fix unsigned comparison which can never be negative
   - Provide missing NULL terminating entries in tables
   - Fix misnaming issues"

* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
  leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  leds: sgm3140: Add richtek,rt5033-led compatible
  dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
  dt-bindings: leds: Drop unneeded quotes
  leds: Fix config reference for AW200xx driver
  leds: leds-mt6323: Add support for WLEDs and MT6332
  leds: leds-mt6323: Add support for MT6331 leds
  leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
  leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
  leds: leds-mt6323: Specify registers and specs in platform data
  dt-bindings: leds: leds-mt6323: Document mt6332 compatible
  dt-bindings: leds: leds-mt6323: Document mt6331 compatible
  leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
  leds: simatic-ipc-leds-gpio: Split up into multiple drivers
  leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
  leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
  leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
  leds: cht-wcove: Remove unneeded semicolon
  leds: cht-wcove: Fix an unsigned comparison which can never be negative
  ...

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for TI TPS6594/TPS6593/LP8764 PMICs
   - Add support for Samsung RT5033 Battery Charger
   - Add support for Analog Devices MAX77540 and MAX77541 PMICs

  New Device Support:
   - Add support for SPI to Rockchip RK808 (and friends)
   - Add support for AXP192 PMIC to X-Powers AXP20X
   - Add support for AXP313a PMIC to X-Powers AXP20X
   - Add support for RK806 to Rockchip RK8XX

  Removed Device Support:
   - Removed MFD support for Richtek RT5033 Battery

  Fix-ups:
   - Remove superfluous code
   - Switch I2C drivers from .probe_new() to .probe()
   - Convert over to managed resources (devm_*(), etc)
   - Use dev_err_probe() for returning errors from .probe()
   - Add lots of Device Tree bindings / support
   - Improve cache efficiency by switching to Maple
   - Use own exported namespaces (NS)
   - Include missing and remove superfluous headers
   - Start using / convert to the new shutdown sys-off API
   - Trivial: variable / define renaming
   - Make use of of_property_read_reg() when requesting DT 'reg's

  Bug Fixes:
   - Fix chip revision readout due to incorrect data masking
   - Amend incorrect register and mask values used for charger state
   - Hide unused functionality at compile time
   - Fix resource leaks following error handling routines
   - Return correct error values and fix error handling in general
   - Repair incorrect device names - used for device matching
   - Remedy broken module auto-loading"

* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
  dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  iio: adc: max77541: Add ADI MAX77541 ADC Support
  regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  mfd: Switch two more drivers back to use struct i2c_driver::probe
  dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
  mfd: stmpe: Only disable the regulators if they are enabled
  mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
  mfd: core: Use of_property_read_reg() to parse "reg"
  mfd: stmfx: Nullify stmfx->vdd in case of error
  mfd: stmfx: Fix error path in stmfx_chip_init
  mfd: intel-lpss: Add missing check for platform_get_resource
  mfd: stpmic1: Add PMIC poweroff via sys-off handler
  mfd: stpmic1: Fixup main control register and bits naming
  dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
  mfd: tps65219: Add support for soft shutdown via sys-off API
  mfd: pm8008: Drop bogus i2c module alias
  mfd: pm8008: Fix module autoloading
  mfd: tps65219: Add GPIO cell instance
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We have two new drivers, some improvements to the core code, lots of
  different updates to existing GPIO drivers and some dt-bindings on
  top.

  There's nothing controversial in here and almost everything has been
  in next for more than a week (95% a lot longer than this). The only
  thing that has spent less time in next is a new driver so no risk of
  regressions.

  The single merge pulls in changes that remove all usage of global GPIO
  numbers from arch/arm/mach-omap.

  Core GPIO library:
   - remove unused symbols
   - don't spam the kernel log with messages about hogs
   - remove old sysfs API cruft
   - improve handling of GPIO masks

  New drivers:
   - add a driver for the BlueField-3 GPIO controller
   - add GPIO support for the TPS65219 PMIC

  Driver improvements:
   - extend the gpio-aggregator driver to support ramp-up/ramp-down
     delay
   - remove unnecessary CONFIG_OF guards from gpio-aggregator
   - readability improvements in gpio-tangier
   - switch i2c drivers back to using probe() now that it's been
     converted in the i2c subsystem to not taking the id parameter
   - remove unused inclusions of of_gpio.h in several drivers
   - make pm ops static in gpio-davinci and fix a comment
   - use more devres in drivers to shrink and simplify the code
   - add missing include in gpio-sa1100
   - add HAS_IOPORT KConfig dependency where needed
   - add permissions checks before accessing pins in gpio-tegra186
   - convert the gpio-zynq driver to using immutable irqchips
   - preserve output settings set by the bootloader in gpio-mpc8xxx

  Selftests:
   - tweak the variable naming in script tests

  Device tree updates:
   - convert gpio-mmio and gpio-stmpe to YAML
   - add parsing of GPIO hogs to gpio-vf610
   - add bindings for the Cirrus EP93xx GPIO controller
   - add gpio-line-names property to the gpio-pca9570 bindings
   - extend the binding for x-powers,axp209 with another block"

* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
  of: unittest: drop assertions for GPIO hog messages
  gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
  gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
  dt-bindings: gpio: gpio-vf610: Add parsing of hogs
  gpio: lpc18xx: Remove unused of_gpio.h inclusion
  gpio: xra1403: Remove unused of_gpio.h inclusion
  gpio: mpc8xxx: Remove unused of_gpio.h inclusion
  dt-bindings: gpio: Add Cirrus EP93xx
  gpio: mpc8xxx: latch GPIOs state on module load when configured as output
  selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
  gpio: mlxbf3: Add gpio driver support
  gpio: delay: Remove duplicative functionality
  gpio: aggregator: Set up a parser of delay line parameters
  gpio: aggregator: Support delay for setting up individual GPIOs
  gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
  dt-bindings: gpio: pca9570: add gpio-line-names property
  gpiolib: remove unused gpio_cansleep()
  gpio: tps65219: add GPIO support for TPS65219 PMIC
  gpio: zynq: fix zynqmp_gpio not an immutable chip warning
  gpio: davinci: make davinci_gpio_dev_pm_ops static
  ...

Add ADI MAX77541/MAX77540 devicetree document.

Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230412111256.40013-5-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>

The binding for ti,am654-ehrpwm-tbclk was updated to remove the syscon
compatible hint. Remove the same from the example in this binding.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230623201519.194269-1-afd@ti.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge series from Biju Das <biju.das.jz@bp.renesas.com>:

This patch series aims to add support for Renesas PMIC RAA215300 and
built-in RTC found on this PMIC device.

The details of PMIC can be found here[1].

Renesas PMIC RAA215300 exposes two separate i2c devices, one for the main
device and another for rtc device.

Mutually exclusive s5m8767,pmic-buck[234]-uses-gpio-dvs properties can
be written simpler, with half of the lines of code.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230619101424.25897-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

Remove the unnecessary #address-cells and #size-cells nodes from
the fan-controller. These are not needed as the fan controller does not
have any children.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230612162444.3936302-1-tharvey@gateworks.com
Signed-off-by: Lee Jones <lee@kernel.org>