linux.git/Documentation/devicetree/bindings/mfd, branch v6.16 Linux kernel source tree Merge tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd 2025-06-03T18:53:55+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-06-03T18:53:55+00:00 69352bd52b2667e5c6e8ebb14143528c28f5e37d Pull MFD updates from Lee Jones: "Samsung Exynos ACPM: - Populate child platform devices from device tree data - Introduce a new API, 'devm_acpm_get_by_node()', for child devices to get the ACPM handle ROHM PMICs: - Add support for the ROHM BD96802 scalable companion PMIC to the BD96801 core driver - Add support for controlling the BD96802 using the BD96801 regulator driver - Add support to the BD96805, which is almost identical to the BD96801 - Add support to the BD96806, which is similar to the BD96802 Maxim MAX77759: - Add a core driver for the MAX77759 companion PMIC - Add a GPIO driver for the expander functions on the MAX77759 - Add an NVMEM driver to expose the non-volatile memory on the MAX77759 STMicroelectronics STM32MP25: - Add support for the STM32MP25 SoC to the stm32-lptimer - Add support for the STM32MP25 to the clocksource driver, handling new register access requirements - Add support for the STM32MP25 to the PWM driver, enabling up to two PWM outputs Broadcom BCM590xx: - Add support for the BCM59054 PMU - Parse the PMU ID and revision to support behavioral differences between chip revisions - Add regulator support for the BCM59054 Samsung S2MPG10: - Add support for the S2MPG10 PMIC, which communicates via the Samsung ACPM firmware instead of I2C Exynos ACPM: - Improve timeout detection reliability by using ktime APIs instead of a loop counter assumption - Allow PMIC access during late system shutdown by switching to 'udelay()' instead of a sleeping function - Fix an issue where reading command results longer than 8 bytes would fail - Silence non-error '-EPROBE_DEFER' messages during boot to clean up logs Exynos LPASS: - Fix an error handling path by switching to 'devm_regmap_init_mmio()' to prevent resource leaks - Fix a bug where 'exynos_lpass_disable()' was called twice in the remove function - Fix another resource leak in the probe's error path by using 'devm_add_action_or_reset()' Samsung SEC: - Handle the s2dos05, which does not have IRQ support, explicitly to prevent warnings - Fix the core driver to correctly handle errors from 'sec_irq_init()' instead of ignoring them STMPE-SPI: - Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro MAINTAINERS: - Adjust a file path for the Siemens IPC LED drivers entry to fix a broken reference Maxim Drivers: - Correct the spelling of "Electronics" in Samsung copyright headers across multiple files General: - Fix wakeup source memory leaks on device unbind for 88pm886, as3722, max14577, max77541, max77705, max8925, rt5033, and sprd-sc27xx drivers Samsung SEC Drivers: - Split the driver into a transport-agnostic core ('sec-core') and transport-specific ('sec-i2c', 'sec-acpm') modules to support non-I2C devices - Merge the 'sec-core' and 'sec-irq' modules to reduce memory consumption - Move internal APIs to a private header to clean up the public API - Improve code style by sorting includes, cleaning up headers, sorting device tables, and using helper macros like 'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG' - Make regmap configuration for s2dos05/s2mpu05 explicit to improve clarity - Rework platform data and regmap instantiation to use OF match data instead of a large switch statement ROHM BD96801/2: - Prepare the driver for new models by separating chip-specific data into its own structure - Drop IC name prefix from IRQ resource names in both the MFD and regulator drivers for simplification Broadcom BCM590xx: - Refactor the regulator driver to store descriptions in a table to ease support for new chips - Rename BCM59056-specific data to prepare for the addition of other regulators - Use 'dev_err_probe()' for cleaner error handling Exynos ACPM: - Correct kerneldoc warnings and use the conventional 'np' argument name General MFD: - Convert 'aat2870' and 'tps65010' to use the per-client debugfs directory provided by the I2C core - Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line value setter callbacks - Constify 'regmap_irq_chip' and other structures in '88pm886' to move data to read-only sections BCM590xx: - Drop the unused "id" member from the 'bcm590xx' struct in preparation for a replacement Samsung SEC Core: - Remove forward declarations for functions that no longer exist SM501: - Remove the unused 'sm501_find_clock()' function New Compatibles: - Google: Add a PMIC child node to the 'google,gs101-acpm-ipc' binding - ROHM: Add new bindings for 'rohm,bd96802-regulator' and 'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806 - Maxim: Add new bindings for 'maxim,max77759-gpio', 'maxim,max77759-nvmem', and the top-level 'maxim,max77759' - STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding - Broadcom: Add 'bcm59054' compatible - Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and 'microchip,sama7d65-secumod' compatibles - Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD binding - MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc', and 'mt8365-infracfg-nao' - Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic' syscon compatibles Refactoring & Cleanup: - Convert Broadcom BCM59056 devicetree bindings to YAML and split them into MFD and regulator parts - Convert the Microchip AT91 secumod binding to YAML - Drop unrelated consumer nodes from binding examples to reduce bloat - Correct indentation and style in various DTS examples" * tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits) mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers mfd: maxim: Correct Samsung "Electronics" spelling in headers mfd: sm501: Remove unused sm501_find_clock mfd: 88pm886: Constify struct regmap_irq_chip and some other structures dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind mfd: rt5033: Fix wakeup source leaks on device unbind mfd: max8925: Fix wakeup source leaks on device unbind mfd: max77705: Fix wakeup source leaks on device unbind mfd: max77541: Fix wakeup source leaks on device unbind mfd: max14577: Fix wakeup source leaks on device unbind mfd: as3722: Fix wakeup source leaks on device unbind mfd: 88pm886: Fix wakeup source leaks on device unbind dt-bindings: mfd: Correct indentation and style in DTS example dt-bindings: mfd: Drop unrelated nodes from DTS example dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE dt-bindings: mfd: syscon: Add mt7988-topmisc mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe() ... 
Pull MFD updates from Lee Jones:
 "Samsung Exynos ACPM:
   - Populate child platform devices from device tree data
   - Introduce a new API, 'devm_acpm_get_by_node()', for child devices
     to get the ACPM handle

  ROHM PMICs:
   - Add support for the ROHM BD96802 scalable companion PMIC to the
     BD96801 core driver
   - Add support for controlling the BD96802 using the BD96801 regulator
     driver
   - Add support to the BD96805, which is almost identical to the
     BD96801
   - Add support to the BD96806, which is similar to the BD96802

  Maxim MAX77759:
   - Add a core driver for the MAX77759 companion PMIC
   - Add a GPIO driver for the expander functions on the MAX77759
   - Add an NVMEM driver to expose the non-volatile memory on the
     MAX77759

  STMicroelectronics STM32MP25:
   - Add support for the STM32MP25 SoC to the stm32-lptimer
   - Add support for the STM32MP25 to the clocksource driver, handling
     new register access requirements
   - Add support for the STM32MP25 to the PWM driver, enabling up to two
     PWM outputs

  Broadcom BCM590xx:
   - Add support for the BCM59054 PMU
   - Parse the PMU ID and revision to support behavioral differences
     between chip revisions
   - Add regulator support for the BCM59054

  Samsung S2MPG10:
   - Add support for the S2MPG10 PMIC, which communicates via the
     Samsung ACPM firmware instead of I2C

  Exynos ACPM:
   - Improve timeout detection reliability by using ktime APIs instead
     of a loop counter assumption
   - Allow PMIC access during late system shutdown by switching to
     'udelay()' instead of a sleeping function
   - Fix an issue where reading command results longer than 8 bytes
     would fail
   - Silence non-error '-EPROBE_DEFER' messages during boot to clean up
     logs

  Exynos LPASS:
   - Fix an error handling path by switching to
     'devm_regmap_init_mmio()' to prevent resource leaks
   - Fix a bug where 'exynos_lpass_disable()' was called twice in the
     remove function
   - Fix another resource leak in the probe's error path by using
     'devm_add_action_or_reset()'

  Samsung SEC:
   - Handle the s2dos05, which does not have IRQ support, explicitly to
     prevent warnings
   - Fix the core driver to correctly handle errors from
     'sec_irq_init()' instead of ignoring them

  STMPE-SPI:
   - Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro

  MAINTAINERS:
   - Adjust a file path for the Siemens IPC LED drivers entry to fix a
     broken reference

  Maxim Drivers:
   - Correct the spelling of "Electronics" in Samsung copyright headers
     across multiple files

  General:
   - Fix wakeup source memory leaks on device unbind for 88pm886,
     as3722, max14577, max77541, max77705, max8925, rt5033, and
     sprd-sc27xx drivers

  Samsung SEC Drivers:
   - Split the driver into a transport-agnostic core ('sec-core') and
     transport-specific ('sec-i2c', 'sec-acpm') modules to support
     non-I2C devices
   - Merge the 'sec-core' and 'sec-irq' modules to reduce memory
     consumption
   - Move internal APIs to a private header to clean up the public API
   - Improve code style by sorting includes, cleaning up headers,
     sorting device tables, and using helper macros like
     'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG'
   - Make regmap configuration for s2dos05/s2mpu05 explicit to improve
     clarity
   - Rework platform data and regmap instantiation to use OF match data
     instead of a large switch statement

  ROHM BD96801/2:
   - Prepare the driver for new models by separating chip-specific data
     into its own structure
   - Drop IC name prefix from IRQ resource names in both the MFD and
     regulator drivers for simplification

  Broadcom BCM590xx:
   - Refactor the regulator driver to store descriptions in a table to
     ease support for new chips
   - Rename BCM59056-specific data to prepare for the addition of other
     regulators
   - Use 'dev_err_probe()' for cleaner error handling

  Exynos ACPM:
   - Correct kerneldoc warnings and use the conventional 'np' argument
     name

  General MFD:
   - Convert 'aat2870' and 'tps65010' to use the per-client debugfs
     directory provided by the I2C core
   - Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line
     value setter callbacks
   - Constify 'regmap_irq_chip' and other structures in '88pm886' to
     move data to read-only sections

  BCM590xx:
   - Drop the unused "id" member from the 'bcm590xx' struct in
     preparation for a replacement

  Samsung SEC Core:
   - Remove forward declarations for functions that no longer exist

  SM501:
   - Remove the unused 'sm501_find_clock()' function

  New Compatibles:
   - Google: Add a PMIC child node to the 'google,gs101-acpm-ipc'
     binding
   - ROHM: Add new bindings for 'rohm,bd96802-regulator' and
     'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806
   - Maxim: Add new bindings for 'maxim,max77759-gpio',
     'maxim,max77759-nvmem', and the top-level 'maxim,max77759'
   - STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding
   - Broadcom: Add 'bcm59054' compatible
   - Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and
     'microchip,sama7d65-secumod' compatibles
   - Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD
     binding
   - MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc',
     and 'mt8365-infracfg-nao'
   - Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic'
     syscon compatibles

  Refactoring & Cleanup:
   - Convert Broadcom BCM59056 devicetree bindings to YAML and split
     them into MFD and regulator parts
   - Convert the Microchip AT91 secumod binding to YAML
   - Drop unrelated consumer nodes from binding examples to reduce bloat
   - Correct indentation and style in various DTS examples"

* tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits)
  mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers
  mfd: maxim: Correct Samsung "Electronics" spelling in headers
  mfd: sm501: Remove unused sm501_find_clock
  mfd: 88pm886: Constify struct regmap_irq_chip and some other structures
  dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao
  mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind
  mfd: rt5033: Fix wakeup source leaks on device unbind
  mfd: max8925: Fix wakeup source leaks on device unbind
  mfd: max77705: Fix wakeup source leaks on device unbind
  mfd: max77541: Fix wakeup source leaks on device unbind
  mfd: max14577: Fix wakeup source leaks on device unbind
  mfd: as3722: Fix wakeup source leaks on device unbind
  mfd: 88pm886: Fix wakeup source leaks on device unbind
  dt-bindings: mfd: Correct indentation and style in DTS example
  dt-bindings: mfd: Drop unrelated nodes from DTS example
  dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic
  dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb
  mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
  dt-bindings: mfd: syscon: Add mt7988-topmisc
  mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe()
  ...
Merge tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2025-05-31T14:53:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-05-31T14:53:30+00:00 297d9111e9fcf47dd1dcc6f79bba915f35378d01 Pull SoC driver updates from Arnd Bergmann: "Updates are across the usual driver subsystems with SoC specific drivers: - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm sm8750, and amlogic c3 and s4 chips. - cache controller updates for sifive chips, plus binding changes for other cache descriptions. - memory controller drivers for mediatek mt6893, stm32 and cleanups for a few more drivers - reset controller drivers for T-Head TH1502, Sophgo sg2044 and Renesas RZ/V2H(P) - SCMI firmware updates to better deal with buggy firmware, plus better support for Qualcomm X1E and NXP i.MX specific interfaces - a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX - cleanups for the TEE firmware subsystem and amdtee driver - minor updates and fixes for freescale/nxp, qualcomm, google, aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung SoCs" * tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits) soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() soc: aspeed: lpc: Fix impossible judgment condition ARM: aspeed: Don't select SRAM docs: firmware: qcom_scm: Fix kernel-doc warning soc: fsl: qe: Consolidate chained IRQ handler install/remove firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 dt-bindings: cache: add QiLai compatible to ax45mp memory: stm32_omm: Fix error handling in stm32_omm_disable_child() dt-bindings: cache: Convert marvell,tauros2-cache to DT schema dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation bus: fsl-mc: Use strscpy() instead of strscpy_pad() soc: fsl: qbman: Remove const from portal->cgrs allocation type bus: fsl_mc: Fix driver_managed_dma check bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value bus: fsl-mc: drop useless cleanup ... 
Pull SoC driver updates from Arnd Bergmann:
 "Updates are across the usual driver subsystems with SoC specific
  drivers:

   - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
     sm8750, and amlogic c3 and s4 chips.

   - cache controller updates for sifive chips, plus binding changes for
     other cache descriptions.

   - memory controller drivers for mediatek mt6893, stm32 and cleanups
     for a few more drivers

   - reset controller drivers for T-Head TH1502, Sophgo sg2044 and
     Renesas RZ/V2H(P)

   - SCMI firmware updates to better deal with buggy firmware, plus
     better support for Qualcomm X1E and NXP i.MX specific interfaces

   - a new platform driver for the crypto firmware on Cznic Turris
     Omnia/MOX

   - cleanups for the TEE firmware subsystem and amdtee driver

   - minor updates and fixes for freescale/nxp, qualcomm, google,
     aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
     broadcom and samsung SoCs"

* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
  soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
  soc: aspeed: lpc: Fix impossible judgment condition
  ARM: aspeed: Don't select SRAM
  docs: firmware: qcom_scm: Fix kernel-doc warning
  soc: fsl: qe: Consolidate chained IRQ handler install/remove
  firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
  dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
  dt-bindings: cache: add QiLai compatible to ax45mp
  memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
  dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
  dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
  soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
  MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
  dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
  dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
  bus: fsl-mc: Use strscpy() instead of strscpy_pad()
  soc: fsl: qbman: Remove const from portal->cgrs allocation type
  bus: fsl_mc: Fix driver_managed_dma check
  bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
  bus: fsl-mc: drop useless cleanup
  ...
Merge tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2025-05-29T15:22:07+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-05-29T15:22:07+00:00 bf373e4c786bfe989e637195252698f45b157a68 Pull devicetree updates from Rob Herring: "DT Bindings: - Convert all remaining interrupt-controller bindings to DT schema - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC PMC, imx-drm, and ftm-quaddec to DT schema - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te, maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard - Add top-level constraints for renesas,vsp1 and renesas,fcp - Add missing constraint in amlogic,pinctrl-a4 'group' nodes - Adjust the allowed properties for dwc3-xilinx, sony,imx219, pci-iommu, and renesas,dsi - Add EcoNet vendor prefix - Fix the reserved-memory.yaml in fsl,qman-fqd - Drop obsolete numa.txt and cpu-topology.txt which are schemas in dtschema now - Drop Renesas RZ/N1S bindings - Ensure Arm cpu nodes don't allow undocumented properties. Add all the properties which are in use and undocumented. Drop the Mediatek cpufreq binding which is not a binding, but just what DT properties the driver uses. - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU - Update documentation on defining child nodes with separate schemas - Add bindings to PSCI MAINTAINERS entry DT core: - Add new functions to simplify driver handling of 'memory-region' properties. Users to be added next cycle. - Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle() - Add missing unlock on error in unittest_data_add()" * tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits) dt-bindings: timer: Add fsl,vf610-pit.yaml dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card dt-bindings: arm/cpus: Allow 2 power-domains entries dt-bindings: usb: dwc3-xilinx: allow dma-coherent media: dt-bindings: sony,imx219: Allow props from video-interface-devices dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller dt-bindings: trivial-devices: Add VZ89TE to trivial media: dt-bindings: renesas,vsp1: add top-level constraints media: dt-bindings: renesas,fcp: add top-level constraints dt-bindings: trivial-devices: Add Maxim max30208 dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema ... 
Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Convert all remaining interrupt-controller bindings to DT schema

   - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
     PMC, imx-drm, and ftm-quaddec to DT schema

   - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
     maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard

   - Add top-level constraints for renesas,vsp1 and renesas,fcp

   - Add missing constraint in amlogic,pinctrl-a4 'group' nodes

   - Adjust the allowed properties for dwc3-xilinx, sony,imx219,
     pci-iommu, and renesas,dsi

   - Add EcoNet vendor prefix

   - Fix the reserved-memory.yaml in fsl,qman-fqd

   - Drop obsolete numa.txt and cpu-topology.txt which are schemas in
     dtschema now

   - Drop Renesas RZ/N1S bindings

   - Ensure Arm cpu nodes don't allow undocumented properties. Add all
     the properties which are in use and undocumented. Drop the Mediatek
     cpufreq binding which is not a binding, but just what DT properties
     the driver uses.

   - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU

   - Update documentation on defining child nodes with separate schemas

   - Add bindings to PSCI MAINTAINERS entry

  DT core:

   - Add new functions to simplify driver handling of 'memory-region'
     properties. Users to be added next cycle.

   - Simplify of_dma_set_restricted_buffer() to use
     of_for_each_phandle()

   - Add missing unlock on error in unittest_data_add()"

* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
  dt-bindings: timer: Add fsl,vf610-pit.yaml
  dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
  ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
  dt-bindings: arm/cpus: Allow 2 power-domains entries
  dt-bindings: usb: dwc3-xilinx: allow dma-coherent
  media: dt-bindings: sony,imx219: Allow props from video-interface-devices
  dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
  dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
  dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
  dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
  dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
  dt-bindings: trivial-devices: Add VZ89TE to trivial
  media: dt-bindings: renesas,vsp1: add top-level constraints
  media: dt-bindings: renesas,fcp: add top-level constraints
  dt-bindings: trivial-devices: Add Maxim max30208
  dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
  dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
  dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
  dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
  dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
  ...
dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao 2025-05-23T07:49:14+00:00 Nícolas F. R. A. Prado nfraprado@collabora.com 2025-05-02T16:43:21+00:00 bdc76c19db1b969d3d7d5da9cccfb39c6bbe6a5c The register space described by DT node of compatible mediatek,mt8365-infracfg-nao exposes a variety of unrelated registers, including registers for controlling bus protection on the MT8365 SoC, which is used by the power domain controller through a syscon. Add this compatible to the syscon binding. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250502-mt8365-infracfg-nao-compatible-v1-1-e40394573f98@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> 
The register space described by DT node of compatible
mediatek,mt8365-infracfg-nao exposes a variety of unrelated registers,
including registers for controlling bus protection on the MT8365 SoC,
which is used by the power domain controller through a syscon.

Add this compatible to the syscon binding.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250502-mt8365-infracfg-nao-compatible-v1-1-e40394573f98@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
dt-bindings: mfd: Correct indentation and style in DTS example 2025-05-23T07:49:01+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-05-01T14:51:27+00:00 54a425bd3f5b1bb9152bd10b0a125c392012b08a DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. While re-indenting, drop unused labels. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250501145125.59952-4-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> 
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.  While re-indenting, drop
unused labels.

No functional changes here, but saves some comments during reviews of
new patches built on existing code.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250501145125.59952-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
dt-bindings: mfd: Drop unrelated nodes from DTS example 2025-05-23T07:49:00+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-05-01T14:51:26+00:00 f9a9ad91da2d0fea42b30cde63f993f85f9702d1 Binding example should not contain other nodes, e.g. consumers of resource providers, because this is completely redundant and adds unnecessary bloat. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250501145125.59952-3-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> 
Binding example should not contain other nodes, e.g. consumers of
resource providers, because this is completely redundant and adds
unnecessary bloat.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250501145125.59952-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic 2025-05-23T07:48:59+00:00 Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com 2025-04-25T17:47:03+00:00 70becbeb7f064a47a1d02ea9b1443be17f4de7af Add compat for Smart Peripheral System (SPS) Interrupt Controller (SIC) present on Qualcomm APQ8064 SoC. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250425-fix-nexus-4-v3-3-da4e39e86d41@oss.qualcomm.com Signed-off-by: Lee Jones <lee@kernel.org> 
Add compat for Smart Peripheral System (SPS) Interrupt Controller (SIC)
present on Qualcomm APQ8064 SoC.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250425-fix-nexus-4-v3-3-da4e39e86d41@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb 2025-05-23T07:48:58+00:00 Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com 2025-04-25T17:47:02+00:00 6d31da9b65006912757cdc48a0e6e91665344865 Add compat string for Qualcomm MultiMedia SubSystem System FPB. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250425-fix-nexus-4-v3-2-da4e39e86d41@oss.qualcomm.com Signed-off-by: Lee Jones <lee@kernel.org> 
Add compat string for Qualcomm MultiMedia SubSystem System FPB.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250425-fix-nexus-4-v3-2-da4e39e86d41@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
dt-bindings: mfd: syscon: Add mt7988-topmisc 2025-05-23T07:48:56+00:00 Frank Wunderlich frank-w@public-files.de 2025-04-22T13:24:28+00:00 401c16f0b47e4f2c1dd7ba95844ac7f2494d9b06 Add compatible for Mediatek mt7988 topmisc syscon. This hardware block contains 2 functional blocks - a powercontroller which is not needed (switched by atf) - a multiplexer for high-speed Combo-Phy This compatible is only for the multiplexer part. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250422132438.15735-6-linux@fw-web.de Signed-off-by: Lee Jones <lee@kernel.org> 
Add compatible for Mediatek mt7988 topmisc syscon.
This hardware block contains 2 functional blocks

- a powercontroller which is not needed (switched by atf)
- a multiplexer for high-speed Combo-Phy

This compatible is only for the multiplexer part.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250422132438.15735-6-linux@fw-web.de
Signed-off-by: Lee Jones <lee@kernel.org>
dt-bindings: mfd: mediatek,mt8195-scpsys: Add support for MT6893 2025-05-23T07:48:52+00:00 AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com 2025-04-16T12:02:25+00:00 9bc2d48514a584af85292da181cc9a4fd6c39f31 Add a compatible string for the scpsys block found in the MediaTek Dimensity 1200 (MT6893) SoC. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250416120225.147826-1-angelogioacchino.delregno@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> 
Add a compatible string for the scpsys block found in the MediaTek
Dimensity 1200 (MT6893) SoC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120225.147826-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>