Pull MFD updates from Lee Jones:

 - Added support for the Analog Devices ADP5585 GPIO and PWM functions

 - Added parsing of GPIO hogs for the ADP5585

 - Fixed module autoloading in the MAX14577 driver

 - Simplified and cleaned up the CROS_EC driver

 - Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the
   INTEL_SOC_PMIC_CHTWC driver

 - Added support for the RK806 PMIC on the I2C bus

 - Removed the remaining header file for the DS1WM driver

 - Added compatible strings for various devices in the device tree
   bindings

 - Fixed a comma-related issue in the 88PM860X_CORE driver

 - Constified read-only regmap structs in various drivers

 - Used scoped variables with memory allocators to simplify error paths
   in the MT6360 and SYSCON drivers

 - Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs

* tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
  mfd: atc260x: Convert a bunch of commas to semicolons
  dt-bindings: mfd: qcom,tcsr: Add compatible for sa8775p
  mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDs
  mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDs
  dt-bindings: mfd: syscon: Add rk3576 QoS register compatible
  dt-bindings: mfd: adp5585: Add parsing of hogs
  mfd: tc3589x: Drop vendorless compatible string from match table
  mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped()
  mfd: max77620: Use for_each_child_of_node_scoped()
  mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strict
  mfd: cros_ec: Update module description
  mfd: cros_ec: Simplify and clean-up cros_ec_dev_init()
  mfd: max14577: Provide MODULE_DEVICE_TABLE() to fix module autoloading
  mfd: rk8xx: Add support for rk806 on i2c bus
  dt-bindings: mfd: syscon: Add ti,j784s4-acspcie-proxy-ctrl compatible
  mfd: ds1wm: Remove remaining header file
  MAINTAINERS: Repair file entry in MARVELL 88PM886 PMIC DRIVER
  mfd: 88pm860x-core: Convert comma to semicolon
  mfd: syscon: Use scoped variables with memory allocators to simplify error paths
  mfd: mt6360: Use scoped variables with memory allocators to simplify error paths
  ...

Document the compatible for sa8775p SoC.

Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240830133908.2246139-1-quic_mojha@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>

Document rk3576 compatible for QoS registers.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/01020191998a2fd4-4d7b091c-9c4c-4067-b8d9-fe7482074d6d-000000@eu-west-1.amazonses.com
Signed-off-by: Lee Jones <lee@kernel.org>

Allow parsing GPIO controller children nodes with GPIO hogs.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240828030405.2851611-1-haibo.chen@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Drop duplicate devices in trivial-devices.yaml

   - Add a common serial peripheral device schema and reference it in
     serial device schemas.

   - Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
     snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
     fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
     aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
     ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema

   - Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
     fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
     isil,isl69260, ti,tps546d24, and lpc32xx DMA mux

   - Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
     mediatek,mt6795-sys-clock.yaml

   - Add arm,gic ESPI and EPPI interrupt type specifiers

   - Add another batch of legacy compatible strings which we have no
     intention of documenting

   - Add dmas/dma-names properties to FSL lcdif

   - Fix wakeup-source reference to m8921-keypad.yaml

   - Treewide fixes of typos in bindings

  DT Core:

   - Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429

   - More conversions to scoped iterators and __free() initializer

   - Handle overflows in address resources on 32-bit systems

   - Extend extracting compatible strings in sources from function
     parameters

   - Use of_property_present() in DT unittest

   - Clean-up of_irq_to_resource() to use helpers

   - Support #msi-cells=<0> in of_msi_get_domain()

   - Improve the kerneldoc for of_property_match_string()

   - kselftest: Ignore nodes that have ancestors disabled"

* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
  dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
  dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
  of/irq: Use helper to define resources
  of/irq: Make use of irq_get_trigger_type()
  dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
  drivers/of: Improve documentation for match_string
  of: property: Do some clean up with use of __free()
  dt-bindings: watchdog: qcom-wdt: document support on SA8255p
  dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
  dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
  dt-bindings: dma: Add lpc32xx DMA mux binding
  dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
  dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
  dt-bindings: trivial-devices: Deprecate "ad,ad7414"
  dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
  dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
  dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
  dt-bindings: Fix various typos
  of: address: Unify resource bounds overflow checking
  ...

Pull pwm updates from Uwe Kleine-König:
 "This contains some cleanups to the core and some mostly minor updates
  to a bunch of drivers and device tree bindings. One thing worth
  pointing out is that it contains an immutable branch containing
  support for a new mfd chip (Analog Devices ADP5585) with several sub
  drivers.

  Thanks go to Andrew Kreimer, Clark Wang, Conor Dooley, David Lechner,
  Dmitry Rokosov, Frank Li, Geert Uytterhoeven, George Stark, Jiapeng
  Chong, Krzysztof Kozlowski, Laurent Pinchart, Liao Chen, Liu Ying, Rob
  Herring and Wolfram Sang for code contributions and reviews and to Lee
  Jones for preparing the above mentioned immutable branch"

* tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (21 commits)
  pwm: stm32: Fix a typo
  dt-bindings: pwm: amlogic: Add new bindings for meson A1 PWM
  dt-bindings: pwm: amlogic: Add optional power-domains
  pwm: Switch back to struct platform_driver::remove()
  dt-bindings: pwm: allwinner,sun4i-a10-pwm: add top-level constraints
  pwm: axi-pwmgen: use shared macro for version reg
  pwm: atmel-hlcdc: Drop trailing comma
  pwm: atmel-hlcdc: Enable module autoloading
  pwm: omap-dmtimer: Use of_property_read_bool()
  pwm: adp5585: Set OSC_EN bit to 1 when PWM state is enabled
  pwm: lp3943: Fix an incorrect type in lp3943_pwm_parse_dt()
  pwm: Simplify pwm_capture()
  pwm: lp3943: Use of_property_count_u32_elems() to get property length
  pwm: Don't export pwm_capture()
  pwm: Make info in traces about affected pwm more useful
  dt-bindings: pwm: renesas,tpu: Add r8a779h0 support
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a779h0 support
  pwm: adp5585: Add Analog Devices ADP5585 support
  gpio: adp5585: Add Analog Devices ADP5585 support
  mfd: adp5585: Add Analog Devices ADP5585 core support
  ...

Pull sound updates from Takashi Iwai:
 "A fairly big update at this time, both in core and driver sides.

  The core received rewrites in PCM buffer allocation handling and
  locking optimizations, PCM rate updates followed by lots of cleanups.

  In ASoC side, the legacy Intel drivers have been deprecated by AVS
  drivers which leaded to the significant amount of code reduction.
  SoundWire driver updates and other cleanups contributed more code
  reduction, too.

  USB-audio driver received a large cleanup of its big quirk table, and
  the old snd_print*() API usages in many legacy drivers are replaced
  with the standard print API.

  Here are some highlights:

  Core:
   - More optimized locking in ALSA control code
   - Rewrites of memalloc helpers for better DMA API usage
   - Drop of obsoleted vmalloc PCM buffer helper API
   - Continued MIDI2 UMP updates
   - Support of a new user-space driven timer instance
   - Update for more PCM support rates and cleanups
   - Xrun counter report in the proc files

  ASoC:
   - Continued simplification and cleanup works for ASoC
   - Extensive cleanups and refactoring of the Soundwire drivers
   - Removal of Intel machine support obsoleted by the AVS driver
   - Lots of DT schema conversions
   - Machine support for many AMD and Intel x86 platforms
   - Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek
     RTL1320 SoundWire and rev C, and Texas Instruments TAS2563

  USB-audio:
   - Add support of multiple control interfaces
   - A large rewrite of quirk table with macros
   - Support for RME Digiface USB

  HD-audio:
   - Cleanup of quirk code for Samsung Galaxy laptops
   - Clean up of detection of Cirrus codecs
   - C-Media CM9825 HD-audio codec support

  Others:
   - Rewrites to standard print API in a lot of legacy drivers"

* tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits)
  ASoC: topology: Fix redundant logical jump
  ASoC: tas2781: Add Calibration Kcontrols for Chromebook
  ASoC: amd: acp: refactor SoundWire machine driver code
  ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions
  ASoC: sdw_util/intel: move soundwire endpoint and dai link structures
  ASoC: intel: sof_sdw: rename soundwire parsing helper functions
  ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures
  ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls
  ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE)
  ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message
  ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations
  ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations
  ALSA: usb-audio: Add logitech Audio profile quirk
  ASoc: mediatek: mt8365: Remove unneeded assignment
  ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards.
  ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL.
  ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv
  ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv
  ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv
  ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links
  ...

Corrected several typos in Documentation/devicetree/bindings files.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

The X-Powers AXP717 contains a boost regulator, that it meant to provide
the 5V USB VBUS voltage when the devices operates on battery.

Add the name "boost" to the regexp describing the allowed node names,
to allow the regulator to be described in the devicetree.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20240816001824.6028-2-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Add the audio codec sub-device. This sub-device is used to set the
optional voltage values according to the hardware.
The properties are:
  - Setup of microphone bias voltage.
  - Setup of the speaker pin pull-down.

Also, add the audio power supply property which is dedicated for
the audio codec sub-device.

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-3-6518d953a141@baylibre.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>