Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ...
Pull DeviceTree updates from Rob Herring:
- Convert to use memblock_virt_alloc in DT code which supports
bootmem arches. With this we can remove the arch specific
early_init_dt_alloc_memory_arch() functions.
- Enable running the DT unittests on UML
- Use SPDX license tags on DT files
- Fix early FDT kconfig ifdef logic
- Clean-up unittest Makefile
- Fix function comment for of_irq_parse_raw
- Add missing documentation for linux,initrd-{start,end} properties
- Clean-up of binding examples using uppercase hex
- Add trivial devices W83773G and Infineon TLV493D-A1B6
- Add missing STM32 SoC bindings
- Various small binding doc fixes
* tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
xtensa: remove arch specific early DT functions
x86: remove arch specific early_init_dt_alloc_memory_arch
nios2: remove arch specific early_init_dt_alloc_memory_arch
mips: remove arch specific early_init_dt_alloc_memory_arch
metag: remove arch specific early DT functions
cris: remove arch specific early DT functions
libfdt: remove unnecessary include directive from <linux/libfdt.h>
of: unittest: refactor Makefile
of/fdt: use memblock_virt_alloc for early alloc
of: Use SPDX license tag for DT files
of/fdt: Fix #ifdef dependency of early flattree declarations
dt-bindings: h8300 clocksource: correct spelling of pulse
dt-bindings: imx6q-pcie: Add required property for i.MX6SX
mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding
dt-bindings: Use lower case hex in unit-addresses
dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
dt-bindings: Add Infineon TLV493D-A1B6
dt-bindings: mailbox: ti,message-manager: Fix interrupt name error
dt-bindings: chosen: Document linux,initrd-{start,end}
dt-bindings: arm: document supported STM32 SoC family
...
Pull regmap updates from Mark Brown:
"A very busy release for regmap, all fairly specialist stuff but
useful:
- Support for disabling locking from Bartosz Golaszewski, allowing
users that handle their own locking to save some overhead.
- Support for hwspinlocks in syscons in MFD from Baolin Wang, this is
going through the regmap tree since the first users turned up some
some cases that needed interface tweaks with 0 being used as a
syscon identifier.
- Support for devices with no read or write flag from Andrew F.
Davis.
- Basic support for devices on SoundWire buses from Vinod Koul"
* tag 'regmap-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
mfd: syscon: Add hardware spinlock support
regmap: Allow empty read/write_flag_mask
regcache: flat: Un-inline index lookup from cache access
regmap: Add SoundWire bus support
regmap: Add one flag to indicate if a hwlock should be used
regmap: debugfs: document why we don't create the debugfs entries
regmap: debugfs: emit a debug message when locking is disabled
regmap: use proper part of work_buf for storing val
regmap: potentially duplicate the name string stored in regmap
regmap: Disable debugfs when locking is disabled
regmap: rename regmap_lock_unlock_empty() to regmap_lock_unlock_none()
regmap: allow to disable all locking mechanisms
regmap: Remove the redundant config to select hwspinlock
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for RAVE Supervisory Processor
Moved drivers:
- Move Realtek Card Reader Driver to Misc
New Device Support:
- Add support for Pinctrl to axp20x
New Functionality:
- Add resume support to atmel-flexcom
Fix-ups:
- Split MFD (mfd) and userspace handlers (platform) in cros_ec
- Fix trivial (whitespace, spelling) issue(s) in pcf50633-core
- Clean-up error handling in ab8500-debugfs
- General tidying up in tmio_core
- Kconfig fix-ups for qcom-pm8xxx
- Licensing changes (SPDX) to stm32-lptimer, stm32-timers
- Device Tree fixups in mc13xxx
- Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc,
kempld-core, intel_soc_pmic_core.c, ab8500-debugfs"
* tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake
mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile
mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro
atmel_flexcom: Support resuming after a chip reset
mfd: Remove duplicate includes
dt-bindings: mfd: mc13xxx: Add the unit address to sysled
mfd: stm32: Adopt SPDX identifier
mfd: axp20x: Add pinctrl cell for AXP813
mfd: pm8xxx: Make elegible for COMPILE_TEST
mfd: kempld-core: Use resource_size function on resource object
mfd: tmio: Move register macros to tmio_core.c
mfd: cros ec: spi: Simplify delay handling between SPI messages
mfd: palmas: Assign the right powerhold mask for tps65917
mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers()
mfd: ti_am335x_tscadc: Remove redundant assignment to node
mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed'
dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver
watchdog: Add RAVE SP watchdog driver
mfd: Add driver for RAVE Supervisory Processor
serdev: Introduce devm_serdev_device_open()
...
Some system control registers need hardware spinlock to synchronize between the multiple subsystems, so we should add hardware spinlock support for syscon. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
As the 'reg' property is mandatory in the subnodes, improve the example by adding the unit address to the sysled node. This prevents the following build warning with W=1: Node /soc/aips@70000000/spba@70000000/ecspi@70010000/pmic@0/leds/sysled0 has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
DT for 4.16 - New boards: - Axentia Nattis with Natte power - sama5d2 PTC ek - Document and use extended TCB bindings * tag 'at91-ab-4.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) ARM: dts: at91: sama5d2_ptc_ek: use TCB0 as timers ARM: dts: at91: sama5d27_som1_ek: use TCB0 as timers ARM: dts: at91: sama5d2 Xplained: use TCB0 as timers ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices ARM: dts: at91: vinco: use TCB2 as timers ARM: dts: at91: ma5d4: use TCB2 as timers ARM: dts: at91: sama5d4 Xplained: use TCB2 as timers ARM: dts: at91: sama5d4ek: use TCB2 as timers ARM: dts: at91: sama5d4: Add TCB2 ARM: dts: at91: sama5d4: TC blocks are also simple-mfd and syscon devices ARM: dts: at91: linea/tse850-3: use TCB0 as timers ARM: dts: at91: sama5d3xek_cmp: use TCB0 as timers ARM: dts: at91: kizbox2: use TCB0 as timers ARM: dts: at91: sama5d3 Xplained: use TCB0 as timers ARM: dts: at91: sama5d3xek: use TCB0 as timers ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices ARM: dts: at91: kizboxmini: use TCB0 as timers ARM: dts: at91: cosino: use TCB0 as timers ARM: dts: at91: acme/g25: use TCB0 as timers ARM: dts: at91: at91sam9x5cm: use TCB0 as timers ... Signed-off-by: Olof Johansson <olof@lixom.net>
The current binding for the TCB is not flexible enough for some use cases and prevents proper utilization of all the channels. Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
DT unit addresses should be lower case hex. Fix all the
binding examples.
Converted with the following command from Krzysztof Kozlowski:
sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')
Signed-off-by: Rob Herring <robh@kernel.org>