<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/Documentation/devicetree/bindings/mfd, branch v4.13</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Merge (most of) tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd</title>
<updated>2017-07-07T20:30:05+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2017-07-07T20:30:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=6972b007ca771e33dec992ccd104c95a97a186e5'/>
<id>6972b007ca771e33dec992ccd104c95a97a186e5</id>
<content type='text'>
Pull MFD updates from Lee Jones:
 "New Drivers:
   - Intel Cherry Trail Whiskey Cove PMIC
   - TI LP87565 PMIC

  New Device Support:
   - Add support for Cannonlake to intel-lpss-pci
   - Add support for Simatic IOT2000 to intel_quark_i2c_gpio

  New Functionality:
   - Add Regulator support (axp20x)

  Fix-ups:
   - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec)
   - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core)
   - Provide deregistration on unbind (rn5t618)
   - Rework DT code/documentation (arizona)
   - Constify things (fsl-imx25-tsadc)
   - MAINTAINERS updates (DA9062/61)
   - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C)
   - Switch to DMI matching (intel_quark_i2c_gpio)
   - Provide an appropriate level of error checking (wm831x-{i2c,spi},
     twl4030-irq, tc6393xb)
   - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc,
     stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc,
     exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099,
     motorola-cpcap)"

[ Skipped the last commit in that series that added eight thousand
  lines of pointless repeated register definitions.  - Linus ]

* tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits)
  mfd: Add LP87565 PMIC support
  mfd: cros_ec: Free IRQ on exit
  dt-bindings: vendor-prefixes: Add arctic to vendor prefix
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: axp20x-i2c: Document that this must be builtin on x86
  mfd: Add Cherry Trail Whiskey Cove PMIC driver
  mfd: tc6393xb: Handle return value of clk_prepare_enable
  mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform
  mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency
  mfd: motorola-cpcap: Use devm_of_platform_populate()
  mfd: smsc-ece: Use devm_of_platform_populate()
  mfd: qcom-spmi-pmic: Use devm_of_platform_populate()
  mfd: palmas: Use devm_of_platform_populate()
  mfd: exynos: Use devm_of_platform_populate()
  mfd: fsl-imx25: Use devm_of_platform_populate()
  mfd: cros_ec: Use devm_of_platform_populate()
  mfd: atmel: Use devm_of_platform_populate()
  mfd: stm32-timers: Use devm_of_platform_populate()
  mfd: intel_soc_pmic: Select designware i2c-bus driver
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull MFD updates from Lee Jones:
 "New Drivers:
   - Intel Cherry Trail Whiskey Cove PMIC
   - TI LP87565 PMIC

  New Device Support:
   - Add support for Cannonlake to intel-lpss-pci
   - Add support for Simatic IOT2000 to intel_quark_i2c_gpio

  New Functionality:
   - Add Regulator support (axp20x)

  Fix-ups:
   - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec)
   - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core)
   - Provide deregistration on unbind (rn5t618)
   - Rework DT code/documentation (arizona)
   - Constify things (fsl-imx25-tsadc)
   - MAINTAINERS updates (DA9062/61)
   - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C)
   - Switch to DMI matching (intel_quark_i2c_gpio)
   - Provide an appropriate level of error checking (wm831x-{i2c,spi},
     twl4030-irq, tc6393xb)
   - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc,
     stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc,
     exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099,
     motorola-cpcap)"

[ Skipped the last commit in that series that added eight thousand
  lines of pointless repeated register definitions.  - Linus ]

* tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits)
  mfd: Add LP87565 PMIC support
  mfd: cros_ec: Free IRQ on exit
  dt-bindings: vendor-prefixes: Add arctic to vendor prefix
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: axp20x-i2c: Document that this must be builtin on x86
  mfd: Add Cherry Trail Whiskey Cove PMIC driver
  mfd: tc6393xb: Handle return value of clk_prepare_enable
  mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform
  mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency
  mfd: motorola-cpcap: Use devm_of_platform_populate()
  mfd: smsc-ece: Use devm_of_platform_populate()
  mfd: qcom-spmi-pmic: Use devm_of_platform_populate()
  mfd: palmas: Use devm_of_platform_populate()
  mfd: exynos: Use devm_of_platform_populate()
  mfd: fsl-imx25: Use devm_of_platform_populate()
  mfd: cros_ec: Use devm_of_platform_populate()
  mfd: atmel: Use devm_of_platform_populate()
  mfd: stm32-timers: Use devm_of_platform_populate()
  mfd: intel_soc_pmic: Select designware i2c-bus driver
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: Add LP87565 PMIC support</title>
<updated>2017-07-06T07:29:13+00:00</updated>
<author>
<name>Keerthy</name>
<email>j-keerthy@ti.com</email>
</author>
<published>2017-06-13T04:58:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=1e3496000c11ec1ec56cf664b6a01d66de423507'/>
<id>1e3496000c11ec1ec56cf664b6a01d66de423507</id>
<content type='text'>
The LP87565 chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:

        - Configurable Bucks(Single and multi-phase).
        - Configurable General Purpose Output Signals (GPO).

The LP87565-Q1 variant device uses two 2-phase outputs configuration,
Buck0 is master for Buck0/1 output and Buck2 is master for Buck2/3
output.

Signed-off-by: Keerthy &lt;j-keerthy@ti.com&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The LP87565 chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:

        - Configurable Bucks(Single and multi-phase).
        - Configurable General Purpose Output Signals (GPO).

The LP87565-Q1 variant device uses two 2-phase outputs configuration,
Buck0 is master for Buck0/1 output and Buck2 is master for Buck2/3
output.

Signed-off-by: Keerthy &lt;j-keerthy@ti.com&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: arizona: Update GPIO binding for newly supported specifiers</title>
<updated>2017-07-06T07:29:11+00:00</updated>
<author>
<name>Charles Keepax</name>
<email>ckeepax@opensource.wolfsonmicro.com</email>
</author>
<published>2017-05-23T14:47:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=7a456cba37a265fbbc91504218125ead2c8b6cc7'/>
<id>7a456cba37a265fbbc91504218125ead2c8b6cc7</id>
<content type='text'>
Link to the generic GPIO specifier bindings now that the second cell of
the binding has some support in the driver.

Signed-off-by: Charles Keepax &lt;ckeepax@opensource.wolfsonmicro.com&gt;
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Link to the generic GPIO specifier bindings now that the second cell of
the binding has some support in the driver.

Signed-off-by: Charles Keepax &lt;ckeepax@opensource.wolfsonmicro.com&gt;
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc</title>
<updated>2017-07-04T21:50:59+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2017-07-04T21:50:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a9ceea26747dfd1879e7d836c5ce40bb8d6fc7e9'/>
<id>a9ceea26747dfd1879e7d836c5ce40bb8d6fc7e9</id>
<content type='text'>
Pull ARM 64-bit DT updates from Arnd Bergmann:
 "Device-tree updates for arm64 platforms. For the first time I can
  remember, this is actually larger than the corresponding branch for
  32-bit platforms overall, though that has more individual changes.

  A significant portion this time is due to added machine support:

   - Initial support for the Realtek RTD1295 SoC, along with the Zidoo
     X9S set-top-box

   - Initial support for Actions Semi S900 and the Bubblegum-96
     single-board-cёmputer.

   - Rockchips support for the rk3399-Firefly single-board-computer gets
     added, this one stands out for being relatively fast, affordable
     and well₋supported, compared to many boards that only fall into one
     or two of the above categories.

   - Mediatek gains support for the mt6797 mobile-phone SoC platform and
     corresponding evaluation board.

   - Amlogic board support gets added for the NanoPi K2 and S905x
     LibreTech CC single-board computers and the R-Box Pro set-top-box

   - Allwinner board support gets added for the OrangePi Win, Orangepi
     Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
     and the SoPine system-on-module.

   - Renesas board support for Salvator-XS and H3ULCB automotive
     development systems.

   - Socionext Uniphier board support for LD11-global and LD20-global,
     whatever those may be.

   - Broadcom adds support for the new Stingray communication processor
     in its iProc family, along with two reference boards.

  Other updates include:

   - For the hisicon platform, support for Hi3660-Hikey960 gets extended
     significantly.

   - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
     Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
  ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
  Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
  arm64: dts: mediatek: don't include missing file
  ARM64: dts: meson-gxl: Add Libre Technology CC support
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  dt-bindings: add Libre Technology vendor prefix
  arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
  arm64: dts: zte: Use - instead of @ for DT OPP entries
  arm64: dts: marvell: add gpio support for Armada 7K/8K
  arm64: dts: marvell: add pinctrl support for Armada 7K/8K
  arm64: dts: marvell: use new binding for the system controller on cp110
  arm64: dts: marvell: remove *-clock-output-names on cp110
  arm64: dts: marvell: use new bindings for xor clocks on ap806
  arm64: dts: marvell: mcbin: enable the mdio node
  arm64: dts: Add Actions Semi S900 and Bubblegum-96
  dt-bindings: Add vendor prefix for uCRobotics
  arm64: dts: marvell: add xmdio nodes for 7k/8k
  arm64: dts: marvell: add a comment on the cp110 slave node status
  arm64: dts: marvell: remove cpm crypto nodes from dts files
  arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull ARM 64-bit DT updates from Arnd Bergmann:
 "Device-tree updates for arm64 platforms. For the first time I can
  remember, this is actually larger than the corresponding branch for
  32-bit platforms overall, though that has more individual changes.

  A significant portion this time is due to added machine support:

   - Initial support for the Realtek RTD1295 SoC, along with the Zidoo
     X9S set-top-box

   - Initial support for Actions Semi S900 and the Bubblegum-96
     single-board-cёmputer.

   - Rockchips support for the rk3399-Firefly single-board-computer gets
     added, this one stands out for being relatively fast, affordable
     and well₋supported, compared to many boards that only fall into one
     or two of the above categories.

   - Mediatek gains support for the mt6797 mobile-phone SoC platform and
     corresponding evaluation board.

   - Amlogic board support gets added for the NanoPi K2 and S905x
     LibreTech CC single-board computers and the R-Box Pro set-top-box

   - Allwinner board support gets added for the OrangePi Win, Orangepi
     Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
     and the SoPine system-on-module.

   - Renesas board support for Salvator-XS and H3ULCB automotive
     development systems.

   - Socionext Uniphier board support for LD11-global and LD20-global,
     whatever those may be.

   - Broadcom adds support for the new Stingray communication processor
     in its iProc family, along with two reference boards.

  Other updates include:

   - For the hisicon platform, support for Hi3660-Hikey960 gets extended
     significantly.

   - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
     Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
  ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
  Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
  arm64: dts: mediatek: don't include missing file
  ARM64: dts: meson-gxl: Add Libre Technology CC support
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  dt-bindings: add Libre Technology vendor prefix
  arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
  arm64: dts: zte: Use - instead of @ for DT OPP entries
  arm64: dts: marvell: add gpio support for Armada 7K/8K
  arm64: dts: marvell: add pinctrl support for Armada 7K/8K
  arm64: dts: marvell: use new binding for the system controller on cp110
  arm64: dts: marvell: remove *-clock-output-names on cp110
  arm64: dts: marvell: use new bindings for xor clocks on ap806
  arm64: dts: marvell: mcbin: enable the mdio node
  arm64: dts: Add Actions Semi S900 and Bubblegum-96
  dt-bindings: Add vendor prefix for uCRobotics
  arm64: dts: marvell: add xmdio nodes for 7k/8k
  arm64: dts: marvell: add a comment on the cp110 slave node status
  arm64: dts: marvell: remove cpm crypto nodes from dts files
  arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge remote-tracking branches 'regulator/topic/settle', 'regulator/topic/tps65910' and 'regulator/topic/tps65917' into regulator-next</title>
<updated>2017-07-03T15:52:21+00:00</updated>
<author>
<name>Mark Brown</name>
<email>broonie@kernel.org</email>
</author>
<published>2017-07-03T15:52:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=8d67f64f7739464c352d4b167ed1748f3b2c1f44'/>
<id>8d67f64f7739464c352d4b167ed1748f3b2c1f44</id>
<content type='text'>
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd</title>
<updated>2017-06-22T17:47:29+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2017-06-22T17:47:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=4f92f0e25a48212ae06e0761504ee0c9c23776ee'/>
<id>4f92f0e25a48212ae06e0761504ee0c9c23776ee</id>
<content type='text'>
Pull MFD fixes from Lee Jones:

 - arizona: use address passed in, rather than hard coded value

 - correct STM32 clock-names value in DT binding documentation

* tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  dt-bindings: mfd: Update STM32 timers clock names
  mfd: arizona: Fix typo using hard-coded register
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull MFD fixes from Lee Jones:

 - arizona: use address passed in, rather than hard coded value

 - correct STM32 clock-names value in DT binding documentation

* tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  dt-bindings: mfd: Update STM32 timers clock names
  mfd: arizona: Fix typo using hard-coded register
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: Update STM32 timers clock names</title>
<updated>2017-06-20T15:47:50+00:00</updated>
<author>
<name>Fabrice Gasnier</name>
<email>fabrice.gasnier@st.com</email>
</author>
<published>2017-06-14T15:13:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=9e69672e90ccff10dab6f0c9545226a886e5973c'/>
<id>9e69672e90ccff10dab6f0c9545226a886e5973c</id>
<content type='text'>
Clock name has been updated during driver/DT binding review:

  https://lkml.org/lkml/2016/12/13/718

Update DT binding doc to reflect this.

Fixes: 8f9359c6c6a0 (dt-bindings: mfd: Add bindings for STM32 Timers driver)
Signed-off-by: Fabrice Gasnier &lt;fabrice.gasnier@st.com&gt;
Acked-by: Benjamin Gaignard &lt;benjamin.gaignard@linaro.org&gt;
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Clock name has been updated during driver/DT binding review:

  https://lkml.org/lkml/2016/12/13/718

Update DT binding doc to reflect this.

Fixes: 8f9359c6c6a0 (dt-bindings: mfd: Add bindings for STM32 Timers driver)
Signed-off-by: Fabrice Gasnier &lt;fabrice.gasnier@st.com&gt;
Acked-by: Benjamin Gaignard &lt;benjamin.gaignard@linaro.org&gt;
Signed-off-by: Lee Jones &lt;lee.jones@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi into next/dt64</title>
<updated>2017-06-19T03:56:42+00:00</updated>
<author>
<name>Olof Johansson</name>
<email>olof@lixom.net</email>
</author>
<published>2017-06-19T03:56:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=010da09e267d1a2dd219385a3d12a8776d100399'/>
<id>010da09e267d1a2dd219385a3d12a8776d100399</id>
<content type='text'>
ARM64: DT: Hisilicon SoC DT updates for 4.13

- Add and update Hi3660-Hikey960 board, Hi3660 PCIe RC, Hi6421v530 MFD and
  Hi3660 MMC binding
- Add and refine devices support for Hi3660-Hikey 960 including clock, reset,
  I2C, GPIO, UART, Bluetooth, RTC, Power Key, LED, SPI, timer, PMIC, regulator,
  sd/sdio and WiFi
- Add k3-dma and i2s/hdmi audio support based on audio-card-graph method for
  Hikey board

* tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi: (21 commits)
  arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support
  arm64: dts: hi3660-hikey960: add nodes for WiFi
  arm64: dts: hi3660: add sd/sdio device nodes
  dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc
  arm64: dts: hikey960: add device node for pmic and regulators
  dt-bindings: mfd: hi6421: Add hi6421v530 compatible string
  arm64: dts: hisi: add kirin pcie node
  dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs
  arm64: dts: hi3660: add sp804 timer node
  arm64: dts: hi3660: add spi device nodes
  arm64: dts: hikey960: add LED nodes
  arm64: dts: hi3660: add power key dts node
  arm64: dts: hi3660: Add pl031 rtc node
  arm64: dts: hikey960: add WL1837 Bluetooth device node
  arm64: dts: hi3660: Add uarts nodes
  arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC
  arm64: dts: Add I2C nodes for Hi3660
  arm64: dts: hi3660: add resources for clock and reset
  arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
  arm64: dts: hisilicon: update compatible string for hikey960
  ...

Signed-off-by: Olof Johansson &lt;olof@lixom.net&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
ARM64: DT: Hisilicon SoC DT updates for 4.13

- Add and update Hi3660-Hikey960 board, Hi3660 PCIe RC, Hi6421v530 MFD and
  Hi3660 MMC binding
- Add and refine devices support for Hi3660-Hikey 960 including clock, reset,
  I2C, GPIO, UART, Bluetooth, RTC, Power Key, LED, SPI, timer, PMIC, regulator,
  sd/sdio and WiFi
- Add k3-dma and i2s/hdmi audio support based on audio-card-graph method for
  Hikey board

* tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi: (21 commits)
  arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support
  arm64: dts: hi3660-hikey960: add nodes for WiFi
  arm64: dts: hi3660: add sd/sdio device nodes
  dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc
  arm64: dts: hikey960: add device node for pmic and regulators
  dt-bindings: mfd: hi6421: Add hi6421v530 compatible string
  arm64: dts: hisi: add kirin pcie node
  dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs
  arm64: dts: hi3660: add sp804 timer node
  arm64: dts: hi3660: add spi device nodes
  arm64: dts: hikey960: add LED nodes
  arm64: dts: hi3660: add power key dts node
  arm64: dts: hi3660: Add pl031 rtc node
  arm64: dts: hikey960: add WL1837 Bluetooth device node
  arm64: dts: hi3660: Add uarts nodes
  arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC
  arm64: dts: Add I2C nodes for Hi3660
  arm64: dts: hi3660: add resources for clock and reset
  arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig
  arm64: dts: hisilicon: update compatible string for hikey960
  ...

Signed-off-by: Olof Johansson &lt;olof@lixom.net&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: hi6421: Add hi6421v530 compatible string</title>
<updated>2017-06-16T14:31:18+00:00</updated>
<author>
<name>Guodong Xu</name>
<email>guodong.xu@linaro.org</email>
</author>
<published>2017-06-15T03:04:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=06dc862af81df3f616566350a743e378a3dfe1ef'/>
<id>06dc862af81df3f616566350a743e378a3dfe1ef</id>
<content type='text'>
Add compatible string for HiSilicon Hi6421v530 PMIC.

Signed-off-by: Guodong Xu &lt;guodong.xu@linaro.org&gt;
Acked-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Acked-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Wei Xu &lt;xuwei5@hisilicon.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add compatible string for HiSilicon Hi6421v530 PMIC.

Signed-off-by: Guodong Xu &lt;guodong.xu@linaro.org&gt;
Acked-by: Lee Jones &lt;lee.jones@linaro.org&gt;
Acked-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Wei Xu &lt;xuwei5@hisilicon.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>regulator: tps65910: wire up sleep control configuration</title>
<updated>2017-06-15T17:23:27+00:00</updated>
<author>
<name>Michał Mirosław</name>
<email>mirq-linux@rere.qmqm.pl</email>
</author>
<published>2017-06-14T19:04:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=a9bc67de0c5713a8675bfe33bfe9cb36c7934589'/>
<id>a9bc67de0c5713a8675bfe33bfe9cb36c7934589</id>
<content type='text'>
This enables configuring the PMIC's sleep mode via device-tree.

A pointer indirection to sleep mode data is removed, as it simplifies
the implementation slightly. In current kernel tree, platform data
structure is not used outside MFD cell drivers.

Signed-off-by: Michał Mirosław &lt;mirq-linux@rere.qmqm.pl&gt;
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This enables configuring the PMIC's sleep mode via device-tree.

A pointer indirection to sleep mode data is removed, as it simplifies
the implementation slightly. In current kernel tree, platform data
structure is not used outside MFD cell drivers.

Signed-off-by: Michał Mirosław &lt;mirq-linux@rere.qmqm.pl&gt;
Signed-off-by: Mark Brown &lt;broonie@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
