<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux.git/Documentation/devicetree/bindings/mfd, branch for-next</title>
<subtitle>Linux kernel source tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/'/>
<entry>
<title>Merge tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl</title>
<updated>2024-11-26T01:24:51+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2024-11-26T01:24:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=2d32fba02e0e5b67fb3a4ea51dde80c0db83f1c1'/>
<id>2d32fba02e0e5b67fb3a4ea51dde80c0db83f1c1</id>
<content type='text'>
Pull pin control updates from Linus Walleij:
 "No core changes this time.

  New drivers:

   - Xlinix Versal pin control driver

   - Ocelot LAN969x pin control driver

   - T-Head TH1520 RISC-V SoC pin control driver

   - Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
     control drivers

   - Qualcomm SM8750 LPASS (low power audio subsystem) pin control
     driver

   - Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
     (multi-purpose-pin)

   - Samsung Exynos8895 and Exynos9810 SoC pin control driver

   - SpacemiT K1 SoC pin control driver

   - Airhoa EN7581 IC pin control driver

  Improvements:

   - The Renesas subdriver now supports schmitt-trigger and open drain
     pin configurations if the hardware supports it

   - Support GPIOF and GPIOG banks in the Aspeed G6 SoC

   - Support the DSW community in the Intel Elkhartlake SoC"

* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
  pinctrl: airoha: Use unsigned long for bit search
  pinctrl: k210: Undef K210_PC_DEFAULT
  pinctrl: qcom: spmi: fix debugfs drive strength
  pinctrl: qcom: Add sm8750 pinctrl driver
  dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
  pinctrl: cy8c95x0: remove unneeded goto labels
  pinctrl: cy8c95x0: embed iterator to the for-loop
  pinctrl: cy8c95x0: Use temporary variable for struct device
  pinctrl: cy8c95x0: use flexible sleeping in reset function
  pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
  pinctrl: cy8c95x0: Use 2-argument strscpy()
  dt-bindings: pinctrl: sx150xq: allow gpio line naming
  pinctrl: single: add marvell,pxa1908-padconf compatible
  dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
  dt-bindings: pinctrl: correct typo of description for cv1800
  pinctrl: qcom: spmi-mpp: Add PM8937 compatible
  dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
  pinctrl: qcom-pmic-gpio: add support for PM8937
  dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
  pinctrl: Use of_property_present() for non-boolean properties
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull pin control updates from Linus Walleij:
 "No core changes this time.

  New drivers:

   - Xlinix Versal pin control driver

   - Ocelot LAN969x pin control driver

   - T-Head TH1520 RISC-V SoC pin control driver

   - Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
     control drivers

   - Qualcomm SM8750 LPASS (low power audio subsystem) pin control
     driver

   - Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
     (multi-purpose-pin)

   - Samsung Exynos8895 and Exynos9810 SoC pin control driver

   - SpacemiT K1 SoC pin control driver

   - Airhoa EN7581 IC pin control driver

  Improvements:

   - The Renesas subdriver now supports schmitt-trigger and open drain
     pin configurations if the hardware supports it

   - Support GPIOF and GPIOG banks in the Aspeed G6 SoC

   - Support the DSW community in the Intel Elkhartlake SoC"

* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
  pinctrl: airoha: Use unsigned long for bit search
  pinctrl: k210: Undef K210_PC_DEFAULT
  pinctrl: qcom: spmi: fix debugfs drive strength
  pinctrl: qcom: Add sm8750 pinctrl driver
  dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
  pinctrl: cy8c95x0: remove unneeded goto labels
  pinctrl: cy8c95x0: embed iterator to the for-loop
  pinctrl: cy8c95x0: Use temporary variable for struct device
  pinctrl: cy8c95x0: use flexible sleeping in reset function
  pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
  pinctrl: cy8c95x0: Use 2-argument strscpy()
  dt-bindings: pinctrl: sx150xq: allow gpio line naming
  pinctrl: single: add marvell,pxa1908-padconf compatible
  dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
  dt-bindings: pinctrl: correct typo of description for cv1800
  pinctrl: qcom: spmi-mpp: Add PM8937 compatible
  dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
  pinctrl: qcom-pmic-gpio: add support for PM8937
  dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
  pinctrl: Use of_property_present() for non-boolean properties
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm</title>
<updated>2024-11-12T15:06:33+00:00</updated>
<author>
<name>Andreas Kemnade</name>
<email>andreas@kemnade.info</email>
</author>
<published>2024-11-11T10:27:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=8ece9d248b851b97e1e0779caa2ca98df9bc41f7'/>
<id>8ece9d248b851b97e1e0779caa2ca98df9bc41f7</id>
<content type='text'>
Apparently there was some confusion regarding milliohm vs. megaohm.
(m/M). Use microohms to be able to properly specify the charger
resistor like other drivers do. This is not used yet by mainline code
yet. Specify a current sense resistor in milliohms range rather then
megaohms range in the examples.

CC: sre@kernel.org
Reported-by: Matti Vaittinen &lt;mazziesaccount@gmail.com&gt;
Closes: https://lore.kernel.org/imx/6dcd724a-a55c-4cba-a45b-21e76b1973b0@gmail.com/T/#mf590875a9f4d3955cd1041d7196ff0c65c0a7e9d
Signed-off-by: Andreas Kemnade &lt;andreas@kemnade.info&gt;
Reviewed-by: Matti Vaittinen &lt;mazziesaccount@gmail.com&gt;
Acked-by: Conor Dooley &lt;conor.dooley@microchip.com&gt;
Reviewed-by: Sebastian Reichel &lt;sebastian.reichel@collabora.com&gt;
Fixes: 1af5332fcf7c ("dt-bindings: mfd: Document ROHM BD71828 bindings")
Link: https://lore.kernel.org/r/20241111102701.358133-1-andreas@kemnade.info
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Apparently there was some confusion regarding milliohm vs. megaohm.
(m/M). Use microohms to be able to properly specify the charger
resistor like other drivers do. This is not used yet by mainline code
yet. Specify a current sense resistor in milliohms range rather then
megaohms range in the examples.

CC: sre@kernel.org
Reported-by: Matti Vaittinen &lt;mazziesaccount@gmail.com&gt;
Closes: https://lore.kernel.org/imx/6dcd724a-a55c-4cba-a45b-21e76b1973b0@gmail.com/T/#mf590875a9f4d3955cd1041d7196ff0c65c0a7e9d
Signed-off-by: Andreas Kemnade &lt;andreas@kemnade.info&gt;
Reviewed-by: Matti Vaittinen &lt;mazziesaccount@gmail.com&gt;
Acked-by: Conor Dooley &lt;conor.dooley@microchip.com&gt;
Reviewed-by: Sebastian Reichel &lt;sebastian.reichel@collabora.com&gt;
Fixes: 1af5332fcf7c ("dt-bindings: mfd: Document ROHM BD71828 bindings")
Link: https://lore.kernel.org/r/20241111102701.358133-1-andreas@kemnade.info
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: sprd,sc2731: Convert to YAML</title>
<updated>2024-11-12T14:48:45+00:00</updated>
<author>
<name>Stanislav Jakubek</name>
<email>stano.jakubek@gmail.com</email>
</author>
<published>2024-11-04T08:48:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=131a975aba393cc81dc86687e55412137c520dec'/>
<id>131a975aba393cc81dc86687e55412137c520dec</id>
<content type='text'>
Convert the Spreadtrum SC27xx PMIC bindings to DT schema. Adjust the
filename to match the compatible of the only in-tree user, SC2731.
Change #interrupt-cells value to 1, as according to [1] that is the
correct value.
Move partial examples of child nodes in the child node schemas to this new
MFD schema to have one complete example.

[1] https://lore.kernel.org/lkml/b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org/

Signed-off-by: Stanislav Jakubek &lt;stano.jakubek@gmail.com&gt;
Reviewed-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Acked-by: Sebastian Reichel &lt;sre@kernel.org&gt;
Acked-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Acked-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
Link: https://lore.kernel.org/r/efd200c3b5b75405e4e450d064b026f10ae2f8e0.1730709384.git.stano.jakubek@gmail.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Convert the Spreadtrum SC27xx PMIC bindings to DT schema. Adjust the
filename to match the compatible of the only in-tree user, SC2731.
Change #interrupt-cells value to 1, as according to [1] that is the
correct value.
Move partial examples of child nodes in the child node schemas to this new
MFD schema to have one complete example.

[1] https://lore.kernel.org/lkml/b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org/

Signed-off-by: Stanislav Jakubek &lt;stano.jakubek@gmail.com&gt;
Reviewed-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Acked-by: Sebastian Reichel &lt;sre@kernel.org&gt;
Acked-by: Alexandre Belloni &lt;alexandre.belloni@bootlin.com&gt;
Acked-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
Link: https://lore.kernel.org/r/efd200c3b5b75405e4e450d064b026f10ae2f8e0.1730709384.git.stano.jakubek@gmail.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: Add Realtek RTL9300 switch peripherals</title>
<updated>2024-11-12T12:15:43+00:00</updated>
<author>
<name>Chris Packham</name>
<email>chris.packham@alliedtelesis.co.nz</email>
</author>
<published>2024-10-31T20:03:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=c25e73d45d530f7285477f9ad59f03808c1284a3'/>
<id>c25e73d45d530f7285477f9ad59f03808c1284a3</id>
<content type='text'>
Add device tree schema for the Realtek RTL9300 switches. The RTL9300
family is made up of the RTL9301, RTL9302B, RTL9302C and RTL9303. These
have the same SoC differ in the Ethernet switch/SERDES arrangement.

Currently the only supported features are the syscon-reboot and i2c
controllers. The syscon-reboot is needed to be able to reboot the board.
The I2C controllers are slightly unusual because they each own an SCL
pin (GPIO8 for the first controller, GPIO 17 for the second) but have 8
common SDA pins which can be assigned to either controller (but not
both).

Signed-off-by: Chris Packham &lt;chris.packham@alliedtelesis.co.nz&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20241031200350.274945-5-chris.packham@alliedtelesis.co.nz
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add device tree schema for the Realtek RTL9300 switches. The RTL9300
family is made up of the RTL9301, RTL9302B, RTL9302C and RTL9303. These
have the same SoC differ in the Ethernet switch/SERDES arrangement.

Currently the only supported features are the syscon-reboot and i2c
controllers. The syscon-reboot is needed to be able to reboot the board.
The I2C controllers are slightly unusual because they each own an SCL
pin (GPIO8 for the first controller, GPIO 17 for the second) but have 8
common SDA pins which can be assigned to either controller (but not
both).

Signed-off-by: Chris Packham &lt;chris.packham@alliedtelesis.co.nz&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20241031200350.274945-5-chris.packham@alliedtelesis.co.nz
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917</title>
<updated>2024-11-12T12:15:42+00:00</updated>
<author>
<name>Barnabás Czémán</name>
<email>barnabas.czeman@mainlining.org</email>
</author>
<published>2024-10-31T01:19:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=7f6d3f7eef31b14b2cc808be5056a9e6320d8e1b'/>
<id>7f6d3f7eef31b14b2cc808be5056a9e6320d8e1b</id>
<content type='text'>
Document the qcom,msm8917-tcsr compatible.

Signed-off-by: Barnabás Czémán &lt;barnabas.czeman@mainlining.org&gt;
Acked-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20241031-msm8917-v2-8-8a075faa89b1@mainlining.org
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Document the qcom,msm8917-tcsr compatible.

Signed-off-by: Barnabás Czémán &lt;barnabas.czeman@mainlining.org&gt;
Acked-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20241031-msm8917-v2-8-8a075faa89b1@mainlining.org
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: aspeed: Support for AST2700</title>
<updated>2024-11-01T16:11:50+00:00</updated>
<author>
<name>Ryan Chen</name>
<email>ryan_chen@aspeedtech.com</email>
</author>
<published>2024-10-23T09:01:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=76c6217c31266e800b67a476bba59dfeb9858a90'/>
<id>76c6217c31266e800b67a476bba59dfeb9858a90</id>
<content type='text'>
Add reset, clk dt bindings headers, and update compatible
support for AST2700 clk, silicon-id in yaml.

Signed-off-by: Ryan Chen &lt;ryan_chen@aspeedtech.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzk@kernel.org&gt;
Link: https://lore.kernel.org/r/20241023090153.1395220-2-ryan_chen@aspeedtech.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add reset, clk dt bindings headers, and update compatible
support for AST2700 clk, silicon-id in yaml.

Signed-off-by: Ryan Chen &lt;ryan_chen@aspeedtech.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzk@kernel.org&gt;
Link: https://lore.kernel.org/r/20241023090153.1395220-2-ryan_chen@aspeedtech.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750</title>
<updated>2024-11-01T15:55:54+00:00</updated>
<author>
<name>Jishnu Prakash</name>
<email>quic_jprakash@quicinc.com</email>
</author>
<published>2024-10-21T23:21:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=42e34f8446252a3dde70822d7e6f8d7d86ec20f4'/>
<id>42e34f8446252a3dde70822d7e6f8d7d86ec20f4</id>
<content type='text'>
Document compatibles for the added pmd8028 and pmih0108 SPMI PMICs.

Signed-off-by: Jishnu Prakash &lt;quic_jprakash@quicinc.com&gt;
Signed-off-by: Melody Olvera &lt;quic_molvera@quicinc.com&gt;
Acked-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20241021232114.2636083-3-quic_molvera@quicinc.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Document compatibles for the added pmd8028 and pmih0108 SPMI PMICs.

Signed-off-by: Jishnu Prakash &lt;quic_jprakash@quicinc.com&gt;
Signed-off-by: Melody Olvera &lt;quic_molvera@quicinc.com&gt;
Acked-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20241021232114.2636083-3-quic_molvera@quicinc.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: x-powers,axp152: Document AXP323</title>
<updated>2024-10-31T15:51:15+00:00</updated>
<author>
<name>Andre Przywara</name>
<email>andre.przywara@arm.com</email>
</author>
<published>2024-10-07T00:14:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=bd91530aee6007a979e52d816779a6e10ed8c00a'/>
<id>bd91530aee6007a979e52d816779a6e10ed8c00a</id>
<content type='text'>
The X-Powers AXP323 is a PMIC used on some newer Allwinner devices.
It is almost the same as the AXP313, but supports dual-phasing the first
two DC/DC converters. A pure AXP313 driver wouldn't know about this, and
might turn the linked DCDC2 regulator off, as it does not seem to be
used. This makes the AXP323 incompatible to the AXP313a.

Add the new compatible string, and treat it like the AXP313a.

Signed-off-by: Andre Przywara &lt;andre.przywara@arm.com&gt;
Reviewed-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Acked-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Link: https://lore.kernel.org/r/20241007001408.27249-2-andre.przywara@arm.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The X-Powers AXP323 is a PMIC used on some newer Allwinner devices.
It is almost the same as the AXP313, but supports dual-phasing the first
two DC/DC converters. A pure AXP313 driver wouldn't know about this, and
might turn the linked DCDC2 regulator off, as it does not seem to be
used. This makes the AXP323 incompatible to the AXP313a.

Add the new compatible string, and treat it like the AXP313a.

Signed-off-by: Andre Przywara &lt;andre.przywara@arm.com&gt;
Reviewed-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Acked-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Link: https://lore.kernel.org/r/20241007001408.27249-2-andre.przywara@arm.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: Add support for Airoha EN7581 GPIO System Controller</title>
<updated>2024-10-30T09:56:51+00:00</updated>
<author>
<name>Christian Marangi</name>
<email>ansuelsmth@gmail.com</email>
</author>
<published>2024-10-22T23:20:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=50dedb1eb1e6755ccab55f6140916c2d192be765'/>
<id>50dedb1eb1e6755ccab55f6140916c2d192be765</id>
<content type='text'>
Add support for Airoha EN7581 GPIO System Controller which provide a
register map for controlling the GPIO, pinctrl and PWM of the SoC via
dedicated pinctrl and pwm child nodes.

Signed-off-by: Christian Marangi &lt;ansuelsmth@gmail.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Reviewed-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Reviewed-by: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@collabora.com&gt;
Co-developed-by: Lorenzo Bianconi &lt;lorenzo@kernel.org&gt;
Signed-off-by: Lorenzo Bianconi &lt;lorenzo@kernel.org&gt;
Link: https://lore.kernel.org/20241023-en7581-pinctrl-v9-4-afb0cbcab0ec@kernel.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for Airoha EN7581 GPIO System Controller which provide a
register map for controlling the GPIO, pinctrl and PWM of the SoC via
dedicated pinctrl and pwm child nodes.

Signed-off-by: Christian Marangi &lt;ansuelsmth@gmail.com&gt;
Reviewed-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Reviewed-by: Rob Herring (Arm) &lt;robh@kernel.org&gt;
Reviewed-by: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@collabora.com&gt;
Co-developed-by: Lorenzo Bianconi &lt;lorenzo@kernel.org&gt;
Signed-off-by: Lorenzo Bianconi &lt;lorenzo@kernel.org&gt;
Link: https://lore.kernel.org/20241023-en7581-pinctrl-v9-4-afb0cbcab0ec@kernel.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dt-bindings: mfd: mediatek: mt6397: Add ADC, CODEC and Regulators for MT6359</title>
<updated>2024-10-16T08:05:22+00:00</updated>
<author>
<name>Macpaul Lin</name>
<email>macpaul.lin@mediatek.com</email>
</author>
<published>2024-10-04T03:01:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux.git/commit/?id=5bcecfcaa6d1d4ea1b29082ed1fd077ba4cccb55'/>
<id>5bcecfcaa6d1d4ea1b29082ed1fd077ba4cccb55</id>
<content type='text'>
Since MT6359 PMIC has been added as one of the compatibles of
"mediatek,mt6397.yaml", the sub-device node of "MT6359 PMIC AUXADC",
"MT6359 Audio Codec"  and "MT6359 PMIC Regulators" should also be
contained in this DT Schema as well.

This patch includes:
 - add 'adc' property and $ref for 'mediatek,mt6359-auxadc'.
 - add 'mt6359-regulator' to the compatibles of regulators.
 - add 'mt6359-codec' to the compatibles of audio-codec.

Signed-off-by: Macpaul Lin &lt;macpaul.lin@mediatek.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20241004030148.13366-1-macpaul.lin@mediatek.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Since MT6359 PMIC has been added as one of the compatibles of
"mediatek,mt6397.yaml", the sub-device node of "MT6359 PMIC AUXADC",
"MT6359 Audio Codec"  and "MT6359 PMIC Regulators" should also be
contained in this DT Schema as well.

This patch includes:
 - add 'adc' property and $ref for 'mediatek,mt6359-auxadc'.
 - add 'mt6359-regulator' to the compatibles of regulators.
 - add 'mt6359-codec' to the compatibles of audio-codec.

Signed-off-by: Macpaul Lin &lt;macpaul.lin@mediatek.com&gt;
Reviewed-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@linaro.org&gt;
Link: https://lore.kernel.org/r/20241004030148.13366-1-macpaul.lin@mediatek.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
