Qualcomm EBI2 peripheral properties were moved from the device schema to
separate "peripheral-props" schema for child node, but the device schema
does not reference the new one.

Reference the peripheral-props schema so the child nodes will be
properly validated from the device schema.

Fixes: 06652f348f28 ("dt-bindings: memory-controllers: qcom,ebi2: Split out child node properties")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306085849.32852-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Samsung Exynos SROM peripheral properties were moved from the device
schema to separate "peripheral-props" schema for child node, but the
device schema does not reference the new one.

Reference the peripheral-props schema so the child nodes will be
properly validated from the device schema.

Fixes: 67bf606fcf18 ("dt-bindings: memory-controllers: samsung,exynos4210-srom: Split out child node properties")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250306085849.32852-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

In order to validate devices in child nodes, the device schemas need to
reference any child node properties. In order to do that, the properties
for child nodes need to be included in mc-peripheral-props.yaml.

"reg: { maxItems: 1 }" was also incorrect. It's up to the device schemas
how many reg entries they have.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250203-dt-lan9115-fix-v1-3-eb35389a7365@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

In order to validate devices in child nodes, the device schemas need to
reference any child node properties. In order to do that, the properties
for child nodes need to be included in mc-peripheral-props.yaml.

"reg: { maxItems: 1 }" was also incorrect. It's up to the device schemas
how many reg entries they have.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250203-dt-lan9115-fix-v1-2-eb35389a7365@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

The preferred location for external parallel/memory buses is in
memory-controllers. 'bus' is generally for internal chip buses.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250203-dt-lan9115-fix-v1-1-eb35389a7365@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Normal practice is examples only show what the binding document defines
and doesn't include consumers in a provider example (or vice-versa). The
"qca,ddr-wb-channel-interrupts" and "qca,ddr-wb-channels" properties are
also not yet documented by a schema, so avoid (not yet enabled) warnings
on them by dropping the interrupt-controller node from the example.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20250103212448.2852884-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Pull SoC driver updates from Arnd Bergmann:
 "Nothing particular important in the SoC driver updates, just the usual
  improvements to for drivers/soc and a couple of subsystems that don't
  fit anywhere else:

   - The largest set of updates is for Qualcomm SoC drivers, extending
     the set of supported features for additional SoCs in the QSEECOM,
     LLCC and socinfo drivers.a

   - The ti_sci firmware driver gains support for power managment

   - The drivers/reset subsystem sees a rework of the microchip sparx5
     and amlogic reset drivers to support additional chips, plus a few
     minor updates on other platforms

   - The SCMI firmware interface driver gains support for two protocol
     extensions, allowing more flexible use of the shared memory area
     and new DT binding properties for configurability.

   - Mediatek SoC drivers gain support for power managment on the MT8188
     SoC and a new driver for DVFS.

   - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
     and a few bugfixes

   - The Hisilicon Kunpeng HCCS driver gains support for configuring
     lanes through sysfs

  Finally, there are cleanups and minor fixes for drivers/{soc, bus,
  memory}, including changing back the .remove_new callback to .remove,
  as well as a few other updates for freescale (powerpc) soc drivers,
  NXP i.MX soc drivers, cznic turris platform driver, memory controller
  drviers, TI OMAP SoC drivers, and Tegra firmware drivers"

* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
  soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
  soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
  soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
  platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
  platform: cznic: turris-omnia-mcu: Document the driver private data structure
  firmware: turris-mox-rwtm: Document the driver private data structure
  bus: Switch back to struct platform_driver::remove()
  soc: qcom: ice: Remove the device_link field in qcom_ice
  drm/msm/adreno: Setup SMMU aparture for per-process page table
  firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
  firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
  soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
  soc: qcom: llcc: Flip the manual slice configuration condition
  dt-bindings: firmware: qcom,scm: Document sm8750 SCM
  firmware: qcom: uefisecapp: Allow X1E Devkit devices
  misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
  misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
  soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
  dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
  ...

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Enable dtc "interrupt_provider" warnings for binding examples. Fix
     the warnings in fsl,mu-msi and ti,sci-inta due to this.

   - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
     altr,fpga-passive-serial to DT schema format

   - Add some documentation on the different forms of YAML text blocks
     which are a constant source of review comments

   - Fix some schema errors in constraints for arrays

   - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462

  DT core:

   - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n

   - Add some warnings on deprecated address handling

   - Rework early_init_dt_scan() so the arch can pass in the phys
     address of the DTB as __pa() is not always valid to use. This fixes
     a warning for arm64 with kexec.

   - Add and use some new DT graph iterators for iterating over ports
     and endpoints

   - Rework reserved-memory handling to be sized dynamically for fixed
     regions

   - Optimize of_modalias() to avoid a strlen() call

   - Constify struct device_node and property pointers where ever
     possible"

* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
  of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
  dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
  of/address: Rework bus matching to avoid warnings
  of: WARN on deprecated #address-cells/#size-cells handling
  of/fdt: Don't use default address cell sizes for address translation
  dt-bindings: Enable dtc "interrupt_provider" warnings
  of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
  dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
  dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  media: xilinx-tpg: use new of_graph functions
  fbdev: omapfb: use new of_graph functions
  gpu: drm: omapdrm: use new of_graph functions
  ASoC: audio-graph-card2: use new of_graph functions
  ASoC: audio-graph-card: use new of_graph functions
  ASoC: test-component: use new of_graph functions
  of: property: use new of_graph functions
  of: property: add of_graph_get_next_port_endpoint()
  of: property: add of_graph_get_next_port()
  of: module: remove strlen() call in of_modalias()
  ...

iMX9 memory controller is similar with other layerscape chips. But some
register layout has a little bit difference, so add new compatible string
'nxp,imx9-memory-controller' for it.

imx9 need two 'reg', one for DDR controller and the other is ECC inject
engine register space. Keep the same restriction for other compatible
string.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-4-86ae6fc2756a@nxp.com

Schemas for array properties should only have 1 level of array
constraints (e.g. items, maxItems, minItems). Sometimes the old
encoding of all properties into a matrix leaked into the schema, and
didn't matter for validation. Now the inner constraints are just
silently ignored as json-schema array keywords are ignored on scalar
values.

Generally, keep the inner constraints and drop the outer "items". With
gicv3 "mbi-alias" property, it is more appropriately a uint32 or uint64
as it is an address and size depends on "#address-cells".

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240925232409.2208515-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>