Pull devicetree updates from Rob Herring:
 "Bindings:

   - DT schema conversions for Samsung clocks, RNG bindings, Qcom
     Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
     Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb

   - DT schema conversions for Broadcom platforms: interrupt
     controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
     iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
     SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
     arbiter, and SATA

   - Add binding schemas for Tegra210 EMC table, TI DC-DC converters,

   - Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues

   - More fixes due to 'unevaluatedProperties' enabling

   - Data type fixes and clean-ups of binding examples found in
     preparation to move to validating DTB files directly (instead of
     intermediate YAML representation.

   - Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus

   - Add various new compatible strings

  DT core:

   - Silence a warning for overlapping reserved memory regions

   - Reimplement unittest overlay tracking

   - Fix stack frame size warning in unittest

   - Clean-ups of early FDT scanning functions

   - Fix handling of "linux,usable-memory-range" on EFI booted systems

   - Add support for 'fail' status on CPU nodes

   - Improve error message in of_phandle_iterator_next()

   - kbuild: Disable duplicate unit-address warnings for disabled nodes"

* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
  dt-bindings: net: mdio: Drop resets/reset-names child properties
  dt-bindings: clock: samsung: convert S5Pv210 to dtschema
  dt-bindings: clock: samsung: convert Exynos5410 to dtschema
  dt-bindings: clock: samsung: convert Exynos5260 to dtschema
  dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
  dt-bindings: clock: samsung: convert Exynos7 to dtschema
  dt-bindings: clock: samsung: convert Exynos5433 to dtschema
  dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
  dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
  dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
  dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
  dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
  dt-bindings: clock: imx5: Drop clock consumer node from example
  dt-bindings: Drop required 'interrupt-parent'
  dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
  dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
  dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
  dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
  dt-bindings: net: stm32-dwmac: Make each example a separate entry
  dt-bindings: net: Cleanup MDIO node schemas
  ...

Pull MTD updates from Miquel Raynal:
 "MTD core changes:

   - mtdchar: Prevent unbounded allocation in MEMWRITE ioctl

   - gen_probe: Use bitmap_zalloc() when applicable

   - Introduce an expert mode for forensics and debugging purposes

   - Clear out unregistered devices a bit more

   - Provide unique name for nvmem device

   - Remove unused header file <linux/mtd/latch-addr-flash.h>

   - Fixed breaking list in __mtd_del_partition.

  MTD device changes:

   - Warn about failure to unregister mtd device in sst25l, mchp48l640,
     mchp23k256, and dataflash drivers.

  Raw NAND core changes:

   - Export nand_read_page_hwecc_oob_first()

  GPMC memory controller for OMAP2 NAND controller changes:

   - Add support for AM64 SoC and allow build on K3 platforms

   - Use a compatible match table when checking for NAND controller

   - Use platform_get_irq() to get the interrupt

  Raw NAND controller changes:

   - OMAP2 NAND controller:
      - Document the missing 'rb-gpios' DT property
      - Drop unused variable
      - Fix force_8bit flag behaviour for DMA mode
      - Move to exec_op interface
      - Use platform_get_irq() to get the interrupt

   - Renesas:
      - Add new NAND controller driver with its bindings and MAINTAINERS entry

   - Onenand:
      - Remove redundant variable ooblen

   - MPC5121:
      - Remove unused variable in ads5121_select_chip()

   - GPMI:
      - Add ERR007117 protection for nfc_apply_timings
      - Remove explicit default gpmi clock setting for i.MX6
      - Use platform_get_irq_byname() to get the interrupt
      - Remove unneeded variable

   - Ingenic:
      - JZ4740 needs 'oob_first' read page function

   - Davinci:
      - Rewrite function description
      - Avoid duplicated page read
      - Don't calculate ECC when reading page

  SPI NOR core changes:

   - Add Pratyush as SPI NOR co-maintainer.

   - Flash parameters initialization was done in a spaghetti way. Clean
     flash parameters initialization.

   - Rework the flash_info flags and clarify where one should be used.

   - Initialize all flash parameters based on JESD216 SFDP where
     possible. Flash parameters and settings that are SFDP discoverable
     should not be duplicated via flash_info flags at flash declaration.

   - Remove debugfs entries that duplicate sysfs entries.

  SPI NOR manufacturer driver changes:

   - Use late_init() hook in various drivers to make it clear that those
     flash parameters are either not declared in the JESD216 SFDP
     standard, or the SFDP tables which define those flash parameters
     are not defined by the flash.

   - Fix mtd size for s3an flashes.

   - Write 2 bytes when disabling Octal DTR mode: 1 byte long
     transactions are not allowed in 8D-8D-8D mode.

  Hyperbus changes:

   - Couple of fixes in Renesas hyperbus rpc-if driver to avoid crash on
     module remove and for missing check for error value in probe"

* tag 'mtd/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (71 commits)
  mtd: spi-nor: Remove debugfs entries that duplicate sysfs entries
  mtd: spi-nor: micron-st: write 2 bytes when disabling Octal DTR mode
  mtd: spi-nor: spansion: write 2 bytes when disabling Octal DTR mode
  mtd: spi-nor: core: use 2 data bytes for template ops
  mtd: spi-nor: Constify part specific fixup hooks
  mtd: spi-nor: core: Remove reference to spi-nor.c
  mtd: rawnand: gpmi: Use platform_get_irq_byname() to get the interrupt
  mtd: rawnand: omap_elm: Use platform_get_irq() to get the interrupt
  mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3
  memory: omap-gpmc: Use a compatible match table when checking for NAND controller
  memory: omap-gpmc: Add support for GPMC on AM64 SoC
  dt-bindings: memory-controllers: ti,gpmc: Add compatible for AM64
  memory: omap-gpmc: Use platform_get_irq() to get the interrupt
  MAINTAINERS: Add an entry for Renesas NAND controller
  mtd: rawnand: renesas: Add new NAND controller driver
  dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller
  mtd: rawnand: gpmi: remove unneeded variable
  mtd: rawnand: omap2: drop unused variable
  mtd: rawnand: omap2: fix force_8bit flag behaviour for DMA mode
  mtd: rawnand: omap2: Add compatible for AM64 SoC
  ...

Pull EDAC updates from Borislav Petkov:

 - Add support for version 3 of the Synopsys DDR controller to
   synopsys_edac

 - Add support for DRR5 and new models 0x10-0x1f and 0x50-0x5f of AMD
   family 0x19 CPUs to amd64_edac

 - The usual set of fixes and cleanups

* tag 'edac_updates_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Add support for family 19h, models 50h-5fh
  EDAC/sb_edac: Remove redundant initialization of variable rc
  RAS/CEC: Remove a repeated 'an' in a comment
  EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh
  EDAC: Add RDDR5 and LRDDR5 memory types
  EDAC/sifive: Fix non-kernel-doc comment
  dt-bindings: memory: Add entry for version 3.80a
  EDAC/synopsys: Enable the driver on Intel's N5X platform
  EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR
  EDAC/synopsys: Use the quirk for version instead of ddr version

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "As usual, this is the bulk of the updates for the SoC tree, adding
  more devices to existing files, addressing issues from ever improving
  automated checking, and fixing minor issues.

  The most interesting bits as usual are the new platforms. All the
  newly supported SoCs belong into existing families this time:

   - Qualcomm gets support for two newly announced platforms, both of
     which can now work in production environments: the SDX65 5G modem
     that can run a minimal Linux on its Cortex-A7 core, and the
     Snapdragon 8 Gen 1, their latest high-end phone SoC.

   - Renesas adds support for R-Car S4-8, the most recent automotive
     Server/Communication SoC.

   - TI adds support for J721s2, a new automotive SoC in the K3 family.

   - Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
     generation following their popular MT76xx series. Only basic
     support is added for now.

   - NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
     series.

   - TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
     have supported for a long time.

  New boards with the existing SoCs include

   - Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers

   - AT91/SAMA5 based evaluation board

   - NXP gains twenty new development and industrial boards for their
     i.MX and Layerscape SoCs

   - Intel IXP4xx now supports the final two machines in device tree
     that were previously only supported in old style board files.

   - Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
     MT8183 is used in the Acer Chromebook 314.

   - Qualcomm gains support for the reference machines using the two new
     SoCs, plus a number of Chromebook variants and phones based on the
     Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
     devices and the Microsoft Surface Duo 2.

   - ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.

   - Tegra now boots various older Android devices based on 32-bit chips
     out of the box, including a number of ASUS Transformer tablets.

     There is also a new Jetson AGX Orin developer kit.

   - Apple support adds the missing device trees for all the remaining
     M1 Macbook and iMac variants, though not yet the M1 Pro/Max
     versions.

   - Allwinner now supports another version of the Tanix TX6 set-top box
     based on the H6 SoC.

   - Broadcom gains support for the Netgear RAXE500 Wireless router
     based on BCM4908"

* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
  Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
  arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
  arm64: dts: qcom: sm8450-qrd: Enable USB nodes
  arm64: dts: qcom: sm8450: Add usb nodes
  ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
  dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
  ARM: dts: aspeed: add LCLK setting into LPC IBT node
  ARM: dts: aspeed: p10: Add TPM device
  ARM: dts: aspeed: p10: Enable USB host ports
  ARM: dts: aspeed: Add TYAN S8036 BMC machine
  ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
  ARM: dts: aspeed: Adding Facebook Bletchley BMC
  ARM: dts: aspeed: g220a: Enable secondary flash
  ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
  ARM: dts: aspeed: Add secure boot controller node
  dt-bindings: aspeed: Add Secure Boot Controller bindings
  ARM: dts: Remove "spidev" nodes
  dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
  dt-bindings: arm: samsung: Document E850-96 board binding
  dt-bindings: Add vendor prefix for WinLink
  ...

AM64 SoC contains the GPMC module. Add compatible for it.

Newer SoCs don't necessarily map GPMC data region at the same place
as legacy SoCs. Add reg-names "data", to provide this information to
the device driver.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211221131757.2030-2-rogerq@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

Document the variant of the memory controller and external memory
controllers found on Tegra234 and add some memory client and SMMU
stream ID definitions for use in device tree files.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The #interconnect-cells properties are required to hook up memory
clients to the MC/EMC in interconnects properties. Add a description for
these properties.

For the nested EMC controller, the list of required properties was
missing. Add it so that the validation can be more strict.

Also, allow multiple reg entries required by Tegra194 and later.

While at it, also remove the dummy BPMP node from the example because it
is incomplete and fails validation. It's also not necessary for this
file and the BPMP DT schema already has a full example.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

With 'unevaluatedProperties' support implemented, the TI GPMC example
has a warning:

Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.example.dt.yaml: memory-controller@6e000000: onenand@0,0: Unevaluated properties are not allowed ('compatible', '#address-cells', '#size-cells', 'partition@0', 'partition@100000' were unexpected)

The child node definition for GPMC is not a complete binding, so specifying
'unevaluatedProperties: false' for it is not correct and should be
dropped.

Fixup the unnecessary 'allOf' while we're here.

Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206174215.2297796-1-robh@kernel.org

Add an entry for version 3.80a of the Synopsys DDR controller.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20211012190709.1504152-4-dinguyen@kernel.org

For completeness add optional interrupts property.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211025205631.21151-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>