This patch adds decriptions for mt2712 IOMMU and SMI.
In order to balance the bandwidth, mt2712 has two M4Us, two
smi-commons, 10 smi-larbs. and mt2712 is also MTK IOMMU gen2 which
uses ARM Short-Descriptor translation table format.
The mt2712 M4U-SMI HW diagram is as below:
EMI
|
------------------------------------
| |
M4U0 M4U1
| |
smi-common0 smi-common1
| |
------------------------- --------------------------------
| | | | | | | | | |
| | | | | | | | | |
larb0 larb1 larb2 larb3 larb6 larb4 larb5 larb7 larb8 larb9
disp0 vdec cam venc jpg mdp1/disp1 mdp2/disp2 mdp3 vdo/nr tvd
All the connections are HW fixed, SW can NOT adjust it.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Move the device tree bindings for the Tegra20 memory controller to the same location as the Tegra30 (and later) memory controller bindings. Signed-off-by: Thierry Reding <treding@nvidia.com>
Memory Controller has a memory client "hot reset" functionality, which resets the DMA interface of a memory client. So MC is a reset controller in addition to IOMMU. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull "Freescale arm64 device tree fixups for 4.17" from Shawn Guo: - It reverts a couple of patches that "fix" DTC warnings on IFC memory controller in a wrong way. We will start over agagin to address the DTC warnings later. * tag 'imx-dt64-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: Revert "dt-bindings: ifc: Fix the unit address format in the examples" Revert "arm64: dts: fsl: fix ifc simple-bus unit address format warnings"
This reverts commit 4e017f1419397473cf3db6e9fa020013998b1aa4. As explained by Rob Herring: "This "fix" is wrong. Memory controllers with chip selects should have the chip select in the unit-address. The correct fix here is you should drop "simple-bus"." Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull "Freescale arm64 device tree updates for 4.17" from Shawn Guo: - Move cpu_thermal device out of bus node to fix DTC simple_bus_reg warning seen with W=1 switch. - Fix IFC child nodes' unit-address to eliminate DTC simple_bus_reg warnings. - Add a dummy size memory 'reg' property for LS1046A device tree to avoid unit_address_vs_reg DTC warning, and the real size will be filled by bootloader. - Update ls208xa-qds board device tree to fix unit_address_vs_reg warnings with DSPI device. - Add idle-states for LS1012A and LS1043A, and correct arm,psci-suspend-param setting for already added idle-states. - DPAA QBMan portal and watchdog device addition. * tag 'imx-dt64-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: ifc: Fix the unit address format in the examples arm64: dts: ls1046a: add a dummy memory 'reg' property arm64: dts: fsl: fix ifc simple-bus unit address format warnings arm64: dts: fsl: update the cpu idle node arm64: dts: ls1043a: add cpu idle support arm64: dts: ls1012a: add cpu idle support arm64: dts: ls208xa-qds: Fix the 'reg' property arm64: dts: ls208xa-qds: Pass unit name to dspi child nodes arm64: dts: ls208xa: Move cpu_thermal out of bus node arm64: dts: ls1088a: Move cpu_thermal out of bus node arm64: dts: ls1046a: Move cpu_thermal out of bus node arm64: dts: ls1043a: Move cpu_thermal out of bus node arm64: dts: ls1012a: Move cpu_thermal out of bus node arm64: dts: Add DPAA QBMan portal 9 arm64: dts: ls1088a: add DT node of watchdog
DTC warnings will be seen if these examples are used in a real dts file
due to a mismatch in the unit address notation.
Align the unit address notation to what is done in the real dts files
as per commit f81d7af79575 ("arm64: dts: fsl: fix ifc simple-bus unit
address format warnings")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Certain revisions of the TI EMIF IP contain ECC support in them. Reflect this in the DT binding. Also, add interrupts property as a required property for the emif controller, as all revisions of the emif IP contain interrupt support; this might remain unused by the kernel driver though. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Pull ARM SoC driver updates from Arnd Bergmann:
"A number of new drivers get added this time, along with many
low-priority bugfixes. The most interesting changes by subsystem are:
bus drivers:
- Updates to the Broadcom bus interface driver to support newer SoC
types
- The TI OMAP sysc driver now supports updated DT bindings
memory controllers:
- A new driver for Tegra186 gets added
- A new driver for the ti-emif sram, to allow relocating
suspend/resume handlers there
SoC specific:
- A new driver for Qualcomm QMI, the interface to the modem on MSM
SoCs
- A new driver for power domains on the actions S700 SoC
- A driver for the Xilinx Zynq VCU logicoreIP
reset controllers:
- A new driver for Amlogic Meson-AGX
- various bug fixes
tee subsystem:
- A new user interface got added to enable asynchronous communication
with the TEE supplicant.
- A new method of using user space memory for communication with the
TEE is added"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
of: platform: fix OF node refcount leak
soc: fsl: guts: Add a NULL check for devm_kasprintf()
bus: ti-sysc: Fix smartreflex sysc mask
psci: add CPU_IDLE dependency
soc: xilinx: Fix Kconfig alignment
soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
soc: bcm: brcmstb: Be multi-platform compatible
soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
Revert "soc: brcmstb: Only register SoC device on STB platforms"
bus: omap: add MODULE_LICENSE tags
soc: brcmstb: Only register SoC device on STB platforms
tee: shm: Potential NULL dereference calling tee_shm_register()
soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
soc: xilinx: Create folder structure for soc specific drivers
of: platform: populate /firmware/ node from of_platform_default_populate_init()
soc: samsung: Add SPDX license identifiers
soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
tee: shm: don't put_page on null shm->pages
...
Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ...