linux.git/Documentation/devicetree/bindings/input, branch v6.8

Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2024-01-19T01:21:35+00:00

Pull input updates from Dmitry Torokhov:

 - a new driver for Adafruit Seesaw gamepad device

 - Zforce touchscreen will handle standard device properties for axis
   swap/inversion

 - handling of advanced sensitivity settings in Microchip CAP11xx
   capacitive sensor driver

 - more drivers have been converted to use newer gpiod API

 - support for dedicated wakeup IRQs in gpio-keys dirver

 - support for slider gestures and OTP variants in iqs269a driver

 - atkbd will report keyboard version as 0xab83 in cases when GET ID
   command was skipped (to deal with problematic firmware on newer
   laptops), restoring the previous behavior

 - other assorted cleanups and changes

* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
  Input: atkbd - use ab83 as id when skipping the getid command
  Input: driver for Adafruit Seesaw Gamepad
  dt-bindings: input: bindings for Adafruit Seesaw Gamepad
  Input: da9063_onkey - avoid explicitly setting input's parent
  Input: da9063_onkey - avoid using OF-specific APIs
  Input: iqs269a - add support for OTP variants
  dt-bindings: input: iqs269a: Add bindings for OTP variants
  Input: iqs269a - add support for slider gestures
  dt-bindings: input: iqs269a: Add bindings for slider gestures
  Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
  Input: zforce_ts - accept standard touchscreen properties
  dt-bindings: touchscreen: neonode,zforce: Use standard properties
  dt-bindings: touchscreen: convert neonode,zforce to json-schema
  dt-bindings: input: convert drv266x to json-schema
  Input: da9063 - use dev_err_probe()
  Input: da9063 - drop redundant prints in probe()
  Input: da9063 - simplify obtaining OF match data
  Input: as5011 - convert to GPIO descriptor
  Input: omap-keypad - drop optional GPIO support
  Input: tca6416-keypad - drop unused include
  ...

dt-bindings: input: bindings for Adafruit Seesaw Gamepad

2024-01-10T07:45:18+00:00

Adds bindings for the Adafruit Seesaw Gamepad.

The gamepad functions as an i2c device with the default address of 0x50
and has an IRQ pin that can be enabled in the driver to allow for a rising
edge trigger on each button press or joystick movement.

Product page:
  https://www.adafruit.com/product/5743
Arduino driver:
  https://github.com/adafruit/Adafruit_Seesaw

Reviewed-by: Conor Dooley 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Anshul Dalal 
Link: https://lore.kernel.org/r/20240106015111.882325-1-anshulusr@gmail.com
Signed-off-by: Dmitry Torokhov

dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901

2024-01-02T10:30:55+00:00

The Ilitek ili2901 touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that they have different
post_power_delay_ms and post_gpio_reset_on_delay_ms.
Ilitek ili2901 also uses 3.3V power supply.

Signed-off-by: Zhengqiao Xia  
Acked-by: Krzysztof Kozlowski 
Signed-off-by: Jiri Kosina

dt-bindings: input: iqs269a: Add bindings for OTP variants

2024-01-01T21:24:03+00:00

This patch adds bindings for the D0 order code of the device. This
order code represents an OTP variant that enables a touch-and-hold
function in place of slider 1.

Also included is the ability to specify the 00 order code (default
option with no OTP customization) explicitly.

Signed-off-by: Jeff LaBundy 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/ZZMaW9RkQ9bKXOUn@nixie71
Signed-off-by: Dmitry Torokhov

dt-bindings: input: iqs269a: Add bindings for slider gestures

2024-01-01T21:24:02+00:00

This patch adds bindings for slider gestures that can be expressed
by the device.

Signed-off-by: Jeff LaBundy 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/ZZMaPrbSi4IrzwKF@nixie71
Signed-off-by: Dmitry Torokhov

dt-bindings: touchscreen: neonode,zforce: Use standard properties

2023-12-24T08:15:19+00:00

Enable touchscreen orientation to be specified by using standard
properties.

Signed-off-by: Andreas Kemnade 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/20231223221213.774868-3-andreas@kemnade.info
Signed-off-by: Dmitry Torokhov

dt-bindings: touchscreen: convert neonode,zforce to json-schema

2023-12-24T08:15:18+00:00

Convert Neonode infrared touchscreen controller binding to DT schema.

Signed-off-by: Andreas Kemnade 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20231223221213.774868-2-andreas@kemnade.info
Signed-off-by: Dmitry Torokhov

dt-bindings: input: convert drv266x to json-schema

2023-12-23T07:24:11+00:00

Convert devicetree binding documentation for ti drv2665 and drv2667
haptics driver to json-schema. The previously two separate bindings have
been merged into a single drv266x.yaml.

Signed-off-by: Anshul Dalal 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20231221183109.684325-1-anshulusr@gmail.com
Signed-off-by: Dmitry Torokhov

dt-bindings: input: microchip,cap11xx: add advanced sensitivity settings

2023-12-13T03:17:28+00:00

Add support for advanced sensitivity settings and signal guard feature.

Signed-off-by: Jiri Valek - 2N 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20231121155250.613242-2-jiriv@axis.com
Signed-off-by: Dmitry Torokhov

dt-bindings: input: gpio-mouse: Convert to json-schema

2023-12-08T23:22:22+00:00

Convert device tree binding documentation for GPIO attached mouse to
json-schema.

Signed-off-by: Anshul Dalal 
Reviewed-by: Linus Walleij 
Reviewed-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20231208075037.114598-1-anshulusr@gmail.com
Signed-off-by: Dmitry Torokhov