linux.git/Documentation/devicetree/bindings/input, branch v6.3

Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2023-02-27T18:04:49+00:00

Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, there are lots of minor driver changes across SoC platforms
  from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
  These usually add support for additional chip variations in existing
  drivers, but also add features or bugfixes.

  The SCMI firmware subsystem gains a unified raw userspace interface
  through debugfs, which can be used for validation purposes.

  Newly added drivers include:

   - New power management drivers for StarFive JH7110, Allwinner D1 and
     Renesas RZ/V2M

   - A driver for Qualcomm battery and power supply status

   - A SoC device driver for identifying Nuvoton WPCM450 chips

   - A regulator coupler driver for Mediatek MT81xxv"

* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  power: supply: Introduce Qualcomm PMIC GLINK power supply
  soc: apple: rtkit: Do not copy the reg state structure to the stack
  soc: sunxi: SUN20I_PPU should depend on PM
  memory: renesas-rpc-if: Remove redundant division of dummy
  soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
  dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
  dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
  firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
  MAINTAINERS: Update qcom CPR maintainer entry
  dt-bindings: firmware: document Qualcomm SM8550 SCM
  dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
  soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
  dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
  soc: qcom: socinfo: Add support for new field in revision 17
  soc: qcom: smd-rpm: Add IPQ9574 compatible
  soc: qcom: pmic_glink: remove redundant calculation of svid
  soc: qcom: stats: Populate all subsystem debugfs files
  dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
  soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
  soc: qcom: pmic_glink: Introduce altmode support
  ...

Merge tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2023-02-25T23:01:32+00:00

Pull input updates from Dmitry Torokhov:

 - a set of tweaks to iqs269a touch controller driver

 - a fix for ads7846 driver to properly handle 7845 chip

 - cap11xx driver will support cap1203, cap1293 and cap1298 models

 - xpad driver will support 8BitDo Pro 2 Wired Controller

 - input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and
   pm_sleep_ptr()

 - other miscellaneous fixes and tweaks

* tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits)
  dt-bindings: input: iqs626a: Redefine trackpad property types
  Input: iqs626a - drop unused device node references
  dt-bindings: input: touchscreen: st,stmfts: convert to dtschema
  Input: cyttsp5 - fix bitmask for touch buttons
  Input: exc3000 - properly stop timer on shutdown
  Input: synaptics-rmi4 - fix SPI device ID
  Input: cap11xx - add support for cap1203, cap1293 and cap1298
  dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298
  Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation
  Input: edt-ft5x06 - fix typo in a comment
  Input: tegra-kbc - use devm_platform_get_and_ioremap_resource()
  Input: st-keyscan - use devm_platform_get_and_ioremap_resource()
  Input: spear-keyboard - use devm_platform_get_and_ioremap_resource()
  Input: olpc_apsp - use devm_platform_get_and_ioremap_resource()
  Input: arc_ps2 - use devm_platform_get_and_ioremap_resource()
  Input: apbps2 - use devm_platform_get_and_ioremap_resource()
  Input: altera_ps2 - use devm_platform_get_and_ioremap_resource()
  Input: ads7846 - don't check penirq immediately for 7845
  Input: ads7846 - always set last command to PWRDOWN
  Input: ads7846 - don't report pressure for ads7845
  ...

dt-bindings: HID: i2c-hid: goodix: Add mainboard-vddio-supply

2023-02-09T13:44:14+00:00

The goodix i2c-hid bindings currently support two models of
touchscreen: GT7375P and GT7986U. The datasheets of both touchscreens
show the following things:
* The mainboard that the touchscreen is connected to is only expected
to supply one voltage to the touchscreen: 3.3V.
* The touchscreen, depending on stuffing options, can accept IO to the
touchscreen as either 3.3V or 1.8V. Presumably this means that the
touchscreen has its own way internally to make or deal with 1.8V
signals when it's configured for 1.8V IO.

NOTE: you've got to look very carefully at the datasheet for the
touchscreen to see that the above bullets are true. Specifically, the
datasheet shows a signal called VDDIO and one might think that this is
where a mainboard would provide VDDIO to the touchscreen. Upon closer
inspection, however, a footnote can be found that says "When VDDIO is
left floating, the logic level is 1.8V [...]; when VDDIO is connected
to AVDD, the logic level is AVDD.". Thus the VDDIO pin on the
touchscreen IC is actually a selector and not a pin whre the mainboard
would pass a reference voltage.

The fact that the touchscreen isn't supplied 1.8V by the mainboard
means that when I originally submitted bindings for these touchscreens
I only listed the 3.3V rail in the bindings. It can be noted that the
original bindings and driver were added for sc7180-trogdor boards and
these boards all use 3.3V IO via a level shifter on the mainboard.

It turns out that with sc7280-herobrine-evoker, we've got a bit of a
strange monkey on our hands. Due to some very interesting but
(unfortunately) set-in-stone hardware design, we are doing 1.8V IO to
the touchscreen but we _also_ have some extra buffers on the mainboard
that need to be powered up to make the IO lines work. After much
pondering about this, it seems like the best way to handle this is to
add an optional "mainboard-vddio" rail to the bindings that is used to
power up the buffers. Specifically, the fact that the touchscreen
datasheet documents that its IOs can be at a different voltage level
than its main power rail means that there truly are two voltage rails
associated with the touchscreen, even if we don't actually provide the
IO rail to it. Thus it doesn't feel absurd for the DT node on the host
to have a 1.8V rail to power up anything related to its 1.8V logic.

Signed-off-by: Douglas Anderson
Reviewed-by: Dmitry Torokhov
Acked-by: Rob Herring
Link: https://lore.kernel.org/r/20230206184744.5.Ia77a96c6c5564f9cc25e6220b5a9171d5c2639e8@changeid
Signed-off-by: Benjamin Tissoires

dt-bindings: input: iqs626a: Redefine trackpad property types

2023-02-04T01:21:04+00:00

Following a recent refactor of the driver to properly drop unused
device nodes, the driver expects trackpad channel touch thresholds
and ATI base values to be specified under single trackpad channel
child nodes.

This enhancement moves both properties to scalar values as opposed
to arrays, making their types consistent across bindings.

Fixes: a8f1f0dc865c ("dt-bindings: input: Add bindings for Azoteq IQS626A")
Signed-off-by: Jeff LaBundy 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/Y9RQcddToBr1rrnJ@nixie71
Signed-off-by: Dmitry Torokhov

dt-bindings: input: touchscreen: st,stmfts: convert to dtschema

2023-02-04T01:00:39+00:00

Convert the ST-Microelectronics FingerTip touchscreen controller
bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/20230127202040.196411-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov

dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298

2023-02-04T00:51:59+00:00

Add support for cap1203, cap1293 and cap1298.

Signed-off-by: Jiri Valek - 2N 
Acked-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20230111131111.475270-2-jiriv@axis.com
Signed-off-by: Dmitry Torokhov

dt-bindings: input: mtk-pmic-keys: add binding for MT6357 PMIC

2023-01-19T17:25:43+00:00

Add binding documentation for the PMIC keys on MT6357.

Signed-off-by: Fabien Parent 
Acked-by: Rob Herring 
Acked-by: Dmitry Torokhov 
Reviewed-by: AngeloGioacchino Del Regno 
Signed-off-by: Alexandre Mergnat 
Link: https://lore.kernel.org/r/20221005-mt6357-support-v8-1-560caaafee53@baylibre.com
Signed-off-by: Matthias Brugger

dt-bindings: drop redundant part of title (manual)

2022-12-16T18:51:43+00:00

The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding" or a "schema", but instead just describe
the hardware.

Manual updates to various binding titles, including capitalizing them.

Signed-off-by: Krzysztof Kozlowski 
Acked-by: Alexandre Belloni 
Reviewed-by: Jonathan Cameron 
Acked-by: Ulf Hansson  # MMC
Acked-by: Stephen Boyd  # clk
Acked-by: Dmitry Torokhov  # input
Acked-by: Mark Brown 
Acked-by: Viresh Kumar  # opp
Link: https://lore.kernel.org/r/20221216163815.522628-10-krzysztof.kozlowski@linaro.org
[robh: add trivial-devices.yaml and net/can/microchip,mcp251xfd.yaml]
Signed-off-by: Rob Herring

dt-bindings: drop redundant part of title (beginning)

2022-12-16T17:41:49+00:00

The Devicetree bindings document does not have to say in the title that
it is a "Devicetree binding", but instead just describe the hardware.

Drop beginning "Devicetree bindings" in various forms:

  find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
    -exec sed -i -e 's/^title: [dD]evice[ -]\?[tT]ree [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \;

  find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
    -exec sed -i -e 's/^title: [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \;

  find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
    -exec sed -i -e 's/^title: [dD][tT] [bB]indings\? for \([tT]he \)\?\(.*\)$/title: \u\2/' {} \;

Signed-off-by: Krzysztof Kozlowski 
Acked-by: Alexandre Belloni 
Reviewed-by: Jonathan Cameron 
Acked-by: Ulf Hansson  # MMC
Acked-by: Stephen Boyd  # clk
Acked-by: Dmitry Torokhov  # input
Acked-by: Mark Brown 
Acked-by: Sebastian Reichel  # power
Link: https://lore.kernel.org/r/20221216163815.522628-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring

dt-bindings: drop redundant part of title (end, part three)

2022-12-16T17:41:49+00:00

The Devicetree bindings document does not have to say in the title that
it is a "binding", but instead just describe the hardware.

Drop trailing "bindings" in various forms (also with trailing full
stop):

  find Documentation/devicetree/bindings/ -type f -name '*.yaml' \
    -not -name 'trivial-devices.yaml' \
    -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \;

Signed-off-by: Krzysztof Kozlowski 
Acked-by: Alexandre Belloni 
Acked-by: Matti Vaittinen  # ROHM
Acked-by: Ulf Hansson  # MMC
Acked-by: Stephen Boyd  # clk
Acked-by: Dmitry Torokhov  # input
Acked-by: Mark Brown 
Acked-by: Hans Verkuil  # media
Acked-by: Sebastian Reichel  # power
Acked-by: Viresh Kumar  # cpufreq
Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring