linux.git/Documentation/devicetree/bindings/input, branch v3.19-rc2 Linux kernel source tree Input: add support for Elan eKTH I2C touchscreens 2014-12-08T07:09:23+00:00 Scott Liu scott.liu@emc.com.tw 2014-11-20T01:26:44+00:00 66aee90088da2f5fb73ba97ee8b5f4fda92e2b53 This driver supports Elan eKTH I2C touchscreen controllers. Note that these are using custom protocol, as opposed to other Elan parts that use HID-over-I2C and are supported by the standard HID-multitouch driver. Signed-off-by: Scott Liu <scott.liu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This driver supports Elan eKTH I2C touchscreen controllers. Note that these
are using custom protocol, as opposed to other Elan parts that use
HID-over-I2C and are supported by the standard HID-multitouch driver.

Signed-off-by: Scott Liu <scott.liu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: gpio_keys - add device tree support for interrupt only keys 2014-12-03T23:28:39+00:00 Alexander Stein alexander.stein@systec-electronic.com 2014-11-25T19:53:45+00:00 f2d347ff70be453e861304448cb2f32ff94d40e9 This features already exists for board config setups. Add support for device tree based systems. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This features already exists for board config setups. Add support for
device tree based systems.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: cap11xx - support for irq-active-high option 2014-11-02T07:09:11+00:00 Matt Ranostay mranostay@gmail.com 2014-11-01T03:02:08+00:00 6bdd2fd1ed6f66597f3cff75c1bb1569beec2fc9 Some applications need to use the irq-active-high push-pull option. This allows it be enabled in the device tree child node. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Some applications need to use the irq-active-high push-pull option.
This allows it be enabled in the device tree child node.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: cap11xx - add support for various cap11xx devices 2014-11-02T07:09:10+00:00 Matt Ranostay mranostay@gmail.com 2014-11-01T03:01:37+00:00 7609a5e973c43a647c4e40184fc8404311fdb97c There are variants of the cap11xx device with a varying number of capacitance detection channels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
There are variants of the cap11xx device with a varying number of
capacitance detection channels.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: rename cap1106 driver to cap11xx 2014-11-02T07:09:10+00:00 Matt Ranostay mranostay@gmail.com 2014-11-01T03:00:13+00:00 c77fd0a42b24acc2d6cc466e73dcb67d50177df6 There are several devices in cap11xx family besides cap1106. The driver can be made to support all of them, so let's give it more generic name. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
There are several devices in cap11xx family besides cap1106. The driver can
be made to support all of them, so let's give it more generic name.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add driver for Elan I2C/SMbus touchpad 2014-10-24T20:54:24+00:00 Duson Lin dusonlin@emc.com.tw 2014-10-03T20:24:27+00:00 6696777c6506fa52b2a0282121195843ed855be6 This driver supports Elan I2C/SMbus touchpads found in some laptops and also in many Chromebooks. Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This driver supports Elan I2C/SMbus touchpads found in some laptops and
also in many Chromebooks.

Signed-off-by: Duson Lin <dusonlin@emc.com.tw>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge tag 'v3.17' into next 2014-10-11T18:34:07+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2014-10-11T18:34:07+00:00 9d93551188069a0a21e664b4bfc89ed4a6df1903 Synchronize with mainline to bring in changes to Synaptics and i8042 drivers. 
Synchronize with mainline to bring in changes to Synaptics and i8042
drivers.
Input: introduce palmas-pwrbutton 2014-09-12T06:40:16+00:00 Nishanth Menon nm@ti.com 2014-08-26T22:57:47+00:00 adff5962fdd2f29bac943bc014ebd529444b2153 Many palmas family of PMICs have support for interrupt based power button. This allows the device to notify the processor of external push button events over the shared palmas interrupt. However, this event is generated only during a "press" operation. Software is supposed to poll(sigh!) for detecting a release event. The PMIC also supports ability to power off independent of the software decisions when the button is pressed for a long duration if the PMIC is appropriately configured on the platform. Even though the function is similar to twl4030_pwrbutton, it is substantially different in operation to belong to a new driver of it's own. Based on original work done by Girish S Ghongdemath <girishsg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Many palmas family of PMICs have support for interrupt based power button.
This allows the device to notify the processor of external push button
events over the shared palmas interrupt. However, this event is generated
only during a "press" operation. Software is supposed to poll(sigh!) for
detecting a release event.

The PMIC also supports ability to power off independent of the software
decisions when the button is pressed for a long duration if the PMIC is
appropriately configured on the platform.

Even though the function is similar to twl4030_pwrbutton, it is
substantially different in operation to belong to a new driver of it's own.

Based on original work done by Girish S Ghongdemath <girishsg@ti.com>

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: atmel_mxt_ts - fix merge in DT documentation 2014-09-12T06:33:09+00:00 Nick Dyer nick.dyer@itdev.co.uk 2014-09-11T17:31:45+00:00 807362cd960daac415e2c8906750b2472c22c80e Something went a bit wrong in merging f5940231a - there's a bit of repeated text that's been introduced. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Something went a bit wrong in merging f5940231a - there's a bit of repeated
text that's been introduced.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add support for the DRV2667 haptic driver 2014-09-08T23:16:23+00:00 Dan Murphy dmurphy@ti.com 2014-09-08T23:10:49+00:00 1c24622572d6ab2ec8e731588d1c131563a64b53 Adding support for the DRV2667 haptic driver. This device has the ability to store vibration patterns in RAM and execute them once the GO bit is set. The initial driver sets a basic waveform in the first waveform sequence and will play the waveform when the GO bit is set and will continously play the waveform until the GO bit is unset. Data sheet is here: http://www.ti.com/product/drv2667 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Adding support for the DRV2667 haptic driver.  This device has the ability
to store vibration patterns in RAM and execute them once the GO bit is set.

The initial driver sets a basic waveform in the first waveform sequence and
will play the waveform when the GO bit is set and will continously play the
waveform until the GO bit is unset.

Data sheet is here: http://www.ti.com/product/drv2667

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>