linux.git/Documentation/devicetree/bindings/input, branch v3.17-rc2 Linux kernel source tree Input: pixcir_i2c_ts - add device tree support 2014-07-28T17:26:18+00:00 Roger Quadros rogerq@ti.com 2014-07-28T17:05:39+00:00 a4054596e93048d50502f6c31c853bfeba5acb8e Provide device tree support and binding information. Also provide support for a new chip "pixcir_tangoc". Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Provide device tree support and binding information.  Also provide support
for a new chip "pixcir_tangoc".

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: atmel_mxt_ts - implement device tree support 2014-07-23T21:41:06+00:00 Stephen Warren swarren@nvidia.com 2014-07-23T19:23:23+00:00 78188be3e5dd59cc2f67bf4cf573e579da186d39 Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: zforce - add regulator handling 2014-07-21T17:28:53+00:00 Heiko Stuebner heiko.stuebner@bq.com 2014-07-21T17:02:11+00:00 3974037039e925a9645e70e1dc91735d28faad95 It's possible that the controller has an individually switchable power supply. Therefore add support to control a supplying regulator. As this is not always the case, the regulator is requested as optional. Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
It's possible that the controller has an individually switchable power supply.
Therefore add support to control a supplying regulator.

As this is not always the case, the regulator is requested as optional.

Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add driver for Microchip's CAP1106 2014-07-18T17:53:29+00:00 Daniel Mack zonque@gmail.com 2014-07-15T16:47:52+00:00 128bb95debc8302a999a495dd21726ca422da12a This patch adds a driver for Microchips CAP1106, an I2C driven, 6-channel capacitive touch sensor. For now, only the capacitive buttons are supported, and no specific settings that can be tweaked for individual channels, except for the device-wide sensitivity gain. The defaults seem to work just fine out of the box, so I'll leave configurable parameters for someone who's in need of them and who can actually measure the impact. All registers are prepared, however. Many of them are just not used for now. The implementation does not make any attempt to be compatible to platform data driven boards, but fully depends on CONFIG_OF. Power management functions are also left for volounteers with the ability to actually test them. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This patch adds a driver for Microchips CAP1106, an I2C driven, 6-channel
capacitive touch sensor.

For now, only the capacitive buttons are supported, and no specific
settings that can be tweaked for individual channels, except for the
device-wide sensitivity gain. The defaults seem to work just fine out of
the box, so I'll leave configurable parameters for someone who's in need
of them and who can actually measure the impact. All registers are
prepared, however. Many of them are just not used for now.

The implementation does not make any attempt to be compatible to platform
data driven boards, but fully depends on CONFIG_OF.

Power management functions are also left for volounteers with the ability
to actually test them.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: tsc2005 - add DT support 2014-05-29T07:06:00+00:00 Sebastian Reichel sre@kernel.org 2014-05-29T06:57:29+00:00 a38cfebb56898633687ab337fd53710e63a0aedd This adds DT support to the tsc2005 touchscreen driver. It also adds regulator support to the driver if booted via DT. Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This adds DT support to the tsc2005 touchscreen driver. It also adds
regulator support to the driver if booted via DT.

Reviewed-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add common DT binding for touchscreens 2014-05-29T07:05:59+00:00 Sebastian Reichel sre@kernel.org 2014-05-29T06:51:53+00:00 b98abe52fa8e2a3797d3cc2db3d0e109f4549c03 Add common DT binding documentation for touchscreen devices and implement input_parse_touchscreen_of_params, which parses the common properties and configures the input device accordingly. The method currently does not interpret the axis inversion properties, since there is no matching flag in the generic linux input device. Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Add common DT binding documentation for touchscreen devices and
implement input_parse_touchscreen_of_params, which parses the common
properties and configures the input device accordingly.

The method currently does not interpret the axis inversion properties,
since there is no matching flag in the generic linux input device.

Reviewed-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: gpio-keys - move the gpio-keys bindings documentation 2014-05-18T20:43:18+00:00 Ezequiel Garcia ezequiel.garcia@free-electrons.com 2014-05-18T20:41:57+00:00 90550e6fb19f42cd6184e56006206ca8296d596b This is an input driver and belongs to input not gpio. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This is an input driver and belongs to input not gpio.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: sun4i-ts - add support for temperature sensor 2014-05-14T23:40:06+00:00 Hans de Goede hdegoede@redhat.com 2014-05-14T18:22:09+00:00 f09f98d3240b7ed2dd84ef6d84ff86df9d61e0f5 The sun4i resisitive touchscreen controller also comes with a built-in temperature sensor. This commit adds support for it. This commit also introduces a new "ts-attached" device-tree property, when this is not set, the input part of the driver won't register. This way the internal temperature sensor can be used to measure the SoC temperature independent of there actually being a touchscreen attached to the controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
The sun4i resisitive touchscreen controller also comes with a built-in
temperature sensor. This commit adds support for it.

This commit also introduces a new "ts-attached" device-tree property,
when this is not set, the input part of the driver won't register. This way
the internal temperature sensor can be used to measure the SoC temperature
independent of there actually being a touchscreen attached to the controller.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add driver for Allwinner sunxi SoC's rtp controller 2014-05-14T23:40:06+00:00 Hans de Goede hdegoede@redhat.com 2014-05-14T18:20:45+00:00 6decea7c5438e2955f64e2513ec9a2fac7602a7d Note the sun4i-ts controller is capable of detecting a second touch, but when a second touch is present then the accuracy becomes so bad the reported touch location is not useable. The original android driver contains some complicated heuristics using the aprox. distance between the 2 touches to see if the user is making a pinch open / close movement, and then reports emulated multi-touch events around the last touch coordinate (as the dual-touch coordinates are worthless). These kinds of heuristics are just asking for trouble (and don't belong in the kernel). So this driver offers straight forward, reliable single touch functionality only. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Note the sun4i-ts controller is capable of detecting a second touch, but
when a second touch is present then the accuracy becomes so bad the
reported touch location is not useable.

The original android driver contains some complicated heuristics using the
aprox. distance between the 2 touches to see if the user is making a pinch
open / close movement, and then reports emulated multi-touch events around
the last touch coordinate (as the dual-touch coordinates are worthless).

These kinds of heuristics are just asking for trouble (and don't belong in
the kernel). So this driver offers straight forward, reliable single touch
functionality only.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add st-keyscan driver 2014-05-14T23:39:46+00:00 Gabriel FERNANDEZ gabriel.fernandez@st.com 2014-04-12T20:45:50+00:00 062589b1399176a9c14bc68e16169f40439d658c This patch adds ST Keyscan driver to use the keypad hw a subset of ST boards provide. Specific board setup will be put in the given dt. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This patch adds ST Keyscan driver to use the keypad hw a subset of ST
boards provide. Specific board setup will be put in the given dt.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>