Pull input updates from Dmitry Torokhov:

 - support for NT36672A touchscreen added to novatek-nvt-ts driver

 - a change to ads7846 driver to prevent XPT2046 from locking up

 - a change switching platform input dirves back to using remove()
   method (from remove_new())

 - updates to a number of input drivers to use the new cleanup
   facilities (__free(...), guard(), and scoped-guard()) which ensure
   that the resources and locks are released properly and automatically

 - other assorted driver cleanups and fixes.

* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
  Input: mpr121 - use devm_regulator_get_enable_read_voltage()
  Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
  Input: spear-keyboard - don't include 'pm_wakeup.h' directly
  Input: cypress-sf - constify struct i2c_device_id
  Input: ads7846 - increase xfer array size in 'struct ser_req'
  Input: fix the input_event struct documentation
  Input: i8042 - fix typo dublicate to duplicate
  Input: ads7846 - add dummy command register clearing cycle
  Input: cs40l50 - fix wrong usage of INIT_WORK()
  Input: introduce notion of passive observers for input handlers
  Input: maple_keyb - use guard notation when acquiring mutex
  Input: locomokbd - use guard notation when acquiring spinlock
  Input: hilkbd - use guard notation when acquiring spinlock
  Input: synaptics-rmi4 - switch to using cleanup functions in F34
  Input: synaptics - fix a typo
  dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
  Input: omap-keypad - use guard notation when acquiring mutex
  Input: imagis - fix warning regarding 'imagis_3038_data' being unused
  Input: userio - remove unneeded semicolon
  Input: sparcspkr - use cleanup facility for device_node
  ...

Pull MFD updates from Lee Jones:

 - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
   tps65010, have undergone minor code improvements to enhance
   consistency and fix race conditions.

 - The syscon driver now utilizes the regmap max_register_is_0
   capability for consistent register map configuration across syscons
   of all sizes.

 - New device support has been added for QCS8300, qcs615, SA8255p, and
   samsung,s2dos05, expanding the range of compatible hardware.

 - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
   and avoids loading the charger with UCSI, streamlining functionality.

 - The bd96801 driver now utilizes the more modern maple tree register
   cache, improving performance.

 - The da9052-spi driver has undergone a fix to change the read-mask to
   write-mask, preventing potential issues.

 - Unused declarations in max77693 have been removed, and support for
   samsung,s2dos05 has been added, enhancing code clarity and device
   compatibility.

 - Error handling in cs42l43 has been fixed to avoid unbalanced
   regulator put and ensure proper synchronization during driver
   removal.

 - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
   MODULE_ALIAS(), improving code consistency.

 - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
   and reorganized for better clarity and maintainability.

 - The intel_soc_pmic_bxtwc driver has undergone significant
   improvements, including the use of IRQ domains for various devices,
   fixing IRQ domain names duplication, and code refactoring for better
   consistency and maintainability.

 - The ipaq-micro driver has received a fix for a missing break
   statement in the default case, enhancing code robustness.

 - Support for the AXP323 PMIC has been added to the axp20x driver,
   along with ensuring a clear relationship between IDs and model names,
   and allowing multiple regulators, broadening hardware compatibility.

 - The cs42l43 driver now disables IRQs during suspend for improved
   power management.

 - The adp5585 driver has reduced its dependencies by dropping the
   obsolete dependency on COMPILE_TEST.

 - Initial support for the MT6328 PMIC has been added to the mt6397
   driver, expanding the range of supported hardware.

 - The rtc-bd70528 driver has been simplified by dropping the IC name
   from IRQ, improving code readability.

 - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
   updated to enhance clarity and incorporate new features.

 - The rt5033 driver has received a fix for a missing
   regmap_del_irq_chip() in the error handling path.

 - New device support has been added for MSM8917, and the
   intel_soc_pmic_crc driver now supports non-ACPI instantiated
   i2c_client.

 - The 88pm886 driver has added support for the RTC cell, and the tqmx86
   driver has improved its GPIO IRQ setup and added I2C IRQ support,
   increasing functionality.

 - The sprd,sc2731 DT schema has been updated and converted to YAML
   format for better readability and maintainability.

* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
  dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
  dt-bindings: mfd: sprd,sc2731: Convert to YAML
  mfd: tqmx86: Add I2C IRQ support
  mfd: tqmx86: Make IRQ setup errors non-fatal
  mfd: tqmx86: Refactor GPIO IRQ setup
  mfd: tqmx86: Improve gpio_irq module parameter description
  mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
  mfd: 88pm886: Add the RTC cell
  dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
  mfd: intel_soc_pmic_*: Consistently use filename as driver name
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
  mfd: rt5033: Fix missing regmap_del_irq_chip()
  mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
  dt-bindings: mfd: aspeed: Support for AST2700
  mfd: Switch back to struct platform_driver::remove()
  dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
  mfd: rtc: bd7xxxx Drop IC name from IRQ
  mfd: mt6397: Add initial support for MT6328
  mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
  ...

Pull HID updates from Jiri Kosina:

 - improvement in the way hid-bpf coexists with specific drivers (others
   than hid-generic) that are already bound to devices (Benjamin
   Tissoires)

 - removal of three way-too-aggressive BUG_ON()s from HID drivers (He
   Lugang)

 - assorted cleanups and small code fixes to HID core (Dmitry Torokhov,
   Yan Zhen, Nathan Chancellor, Andy Shevchenko)

 - support for Corsair Void headset family (Stuart Hayhurst)

 - Support for Goodix GT7986U SPI (Charles Wang)

 - initial vendor-specific driver for Kysona, currently adding support
   for Kysona M600 (Lode Willems)

 - other assorted code cleanups and small bugfixes all over the place

* tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits)
  HID: multitouch: make mt_set_mode() less cryptic
  HID: hid-goodix-spi: Add OF supports
  dt-bindings: input: Goodix GT7986U SPI HID Touchscreen
  HID: hyperv: streamline driver probe to avoid devres issues
  HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support
  HID: rmi: Add select RMI4_F3A in Kconfig
  HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
  HID: steelseries: Add capacity_level mapping
  HID: steelseries: Fix battery requests stopping after some time
  HID: hid-goodix: Fix HID get/set feature operation overwritten problem
  HID: hid-goodix: Return 0 when receiving an empty HID feature package
  HID: bpf: drop use of Logical|Physical|UsageRange
  HID: bpf: Fix Rapoo M50 Plus Silent side buttons
  HID: bpf: Fix NKRO on Mistel MD770
  HID: replace BUG_ON() with WARN_ON()
  HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set
  HID: Kysona: add basic online status
  HID: Kysona: check battery status every 5s using a workqueue
  HID: Kysona: Add basic battery reporting for Kysona M600
  HID: Add IDs for Kysona
  ...

The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.

NOTE: these bindings are distinct from the bindings used with the
GT7986U when the chip is running I2C firmware. For some background,
see discussion on the mailing lists in the thread:

https://lore.kernel.org/r/20241018020815.3098263-2-charles.goodix@gmail.com

Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

The user and driver both indicate this property is a boolean, not int32.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20241101211304.20886-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert device tree binding doc zii,rave-sp-pwrbutton.txt to yaml format.
Additional changes:
- add ref to input.yaml.
- remove mfd node in example.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-zii_yaml-v2-1-0ab730607422@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Add a compatible for the keys found on the MT6359 PMIC.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20241008074137.20269-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the mfd: mediatek: mt6397 binding to DT schema format.

MT6323, MT6358, and MT6397 are PMIC devices with multiple function
subdevices. They share a common PMIC design but have variations in
subdevice combinations.

Key updates in this conversion:

1. RTC:
   - Convert rtc-mt6397.txt and merge into parent MT6397 PMIC DT schema.

2. Regulators:
   - Align to generic name "regulators".
   - Update references from .txt to .yaml for mt6323, mt6358, and mt6397
     regulators.
   - Simplify regulator name labels in device tree examples.

3. Audio Codec:
   - Simplify Audio Codec part with updating compatible items.
   - Align to generic name "audio-codec" for codec and sound subdevices.

4. Clocks:
   - Align to generic name "clocks" for clockbuffer subdevices.

5. LEDs:
   - Convert leds-mt6323.txt and merge into parent MT6397 PMIC DT schema.
   - Update LED binding.

6. Keys:
   - Add detailed descriptions for power and home keys.
   - Add compatible: mediatek,mt6358-keys.

7. Power Controller:
   - Convert mt6323-poweroff.txt and merge into parent MT6397 PMIC DT
     schema.
   - Add #power-domain-cells property to fix dt-binding check error.
   - Clarify "BBPU" as "Baseband power up".

8. Pinctrl:
   - Align to generic name "pinctrl" instead of "pin-controller".

9. Compatible:
   - Drop "mediatek,mt6357" since there is a separated DT Schema
     for PMIC MT6357.

10. Examples:
   - MT6323: Retain complete examples for this PMIC.
   - MT6358 and MT6397: simplify settings in regulators.
    - Preserve "audio-codec", "clocks", "pinctrl", "rtc", and "keys"
      sections as they contain typical settings for different PMICs.

Additional updates:
- MAINTAINERS: Add co-maintainers and reference to
  mfd/mediatek,mt6397.yaml for LED and power-controller drivers.
- input/mediatek,pmic-keys.yaml: Update reference to
  mfd/mediatek,mt6397.yaml.

Signed-off-by: Sen Chu <sen.chu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241001104145.24054-3-macpaul.lin@mediatek.com
Signed-off-by: Lee Jones <lee@kernel.org>

Document the Novatek NVT touchscreen controller present in devices like
qcom/sdm845-xiaomi-beryllium-tianma.dts. Also, include the devictree
binding file in the MAINTAINERS file.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-2-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull SoC update from Arnd Bergmann:
 "Convert ep93xx to devicetree

  This concludes a long journey towards replacing the old board files
  with devictree description on the Cirrus Logic EP93xx platform.

  Nikita Shubin has been working on this for a long time, for details
  see the last post on

    https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"

* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
  MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
  soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
  net: cirrus: use u8 for addr to calm down sparse
  dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
  dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
  pinctrl: ep93xx: Fix raster pins typo
  spi: ep93xx: update kerneldoc comments for ep93xx_spi
  clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
  clk: ep93xx: add module license
  dmaengine: cirrus: remove platform code
  ASoC: cirrus: edb93xx: Delete driver
  ARM: ep93xx: soc: drop defines
  ARM: ep93xx: delete all boardfiles
  ata: pata_ep93xx: remove legacy pinctrl use
  pwm: ep93xx: drop legacy pinctrl
  ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
  ARM: dts: ep93xx: Add EDB9302 DT
  ARM: dts: ep93xx: add ts7250 board
  ARM: dts: add Cirrus EP93XX SoC .dtsi
  ...