linux.git/Documentation/devicetree/bindings/input/touchscreen, branch v5.8

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2020-06-10T20:51:47+00:00

Pull input updates from Dmitry Torokhov:

 - a new driver for the Azoteq IQS269A capacitive touch controller

 - a new driver for the Cypress CY8CTMA140 touchscreen

 - updates to Elan and ft5x06 touchscreen drivers

 - assorted driver fixes

 - msm-vibrator has been removed as we have a more generic solution

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits)
  Input: adi - work around module name confict
  Input: iqs269a - add missing I2C dependency
  Input: elants - refactor elants_i2c_execute_command()
  Input: elants - override touchscreen info with DT properties
  Input: elants - remove unused axes
  Input: add support for Azoteq IQS269A
  dt-bindings: input: Add bindings for Azoteq IQS269A
  Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups
  Input: remove msm-vibrator driver
  dt-bindings: Input: remove msm-vibrator
  Input: elants_i2c - provide an attribute to show calibration count
  Input: introduce input_mt_report_slot_inactive()
  dt-bindings: input: touchscreen: elants_i2c: convert to YAML
  Input: add driver for the Cypress CY8CTMA140 touchscreen
  dt-bindings: touchscreen: Add CY8CTMA140 bindings
  Input: edt-ft5x06 - prefer asynchronous probe
  Input: edt-ft5x06 - improve power management operations
  Input: edt-ft5x06 - move parameter restore into helper
  Input: edt-ft5x06 - fix get_default register write access
  Input: atkbd - receive and use physcode->keycode mapping from FW
  ...

dt-bindings: input: touchscreen: edt-ft5x06: change reg property

2020-05-29T17:07:38+00:00

A test with the command below gives this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml:
touchscreen@3e: reg:0:0: 56 was expected

The touchscreen chip on 'rk3188-bqedison2qc' and other BQ models
was shipped with different addresses then the binding currently allows.
Change the reg property that any address will pass.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/touchscreen/
edt-ft5x06.yaml

Signed-off-by: Johan Jonker 
Acked-by: Heiko Stuebner 
Signed-off-by: Rob Herring

dt-bindings: input: touchscreen: elants_i2c: convert to YAML

2020-05-12T20:17:57+00:00

Convert elants_i2c.txt DT binding to YAML and put into correct directory.

Reviewed-by: Dmitry Osipenko 
Signed-off-by: David Heidelberg 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/20200423173253.711725-2-david@ixit.cz
Signed-off-by: Dmitry Torokhov

Merge tag 'v5.6' into next

2020-05-12T19:18:21+00:00

Sync up with mainline to get device tree and other changes.

dt-bindings: touchscreen: Add CY8CTMA140 bindings

2020-05-10T05:26:46+00:00

This adds device tree bindings for the Cypress CY8CTMA140 touchscreen.

Reviewed-by: Rob Herring 
Signed-off-by: Linus Walleij 
Link: https://lore.kernel.org/r/20200506123435.187432-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov

dt-bindings: Remove cases of 'allOf' containing a '$ref'

2020-05-03T16:10:41+00:00

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.

Scripted with ruamel.yaml with some manual fixups. Some minor whitespace
changes from the script.

Signed-off-by: Rob Herring 
Acked-by: Maxime Ripard 
Acked-by: Lee Jones 
Acked-By: Vinod Koul 
Acked-by: Mark Brown 
Acked-by: Alexandre Belloni 
Acked-by: Wolfram Sang  # for I2C
Reviewed-by: Linus Walleij 
Acked-by: Jonathan Cameron  #for-iio
Reviewed-by: Stephen Boyd  # clock
Signed-off-by: Rob Herring

dt-bindings: mms114: document melfas,mms345l binding

2020-04-25T20:09:54+00:00

The mms114 driver now supports MMS345L; document the
melfas,mms345l binding that is used for it.

Signed-off-by: Stephan Gerhold 
Reviewed-by: Andi Shyti 
Acked-by: Rob Herring 
Link: https://lore.kernel.org/r/20200423102431.2715-2-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov

Merge branch 'dt/linus' into dt/next

2020-04-17T19:37:05+00:00

dt-bindings: Clean-up schema indentation formatting

2020-04-16T21:59:22+00:00

Fix various inconsistencies in schema indentation. Most of these are
list indentation which should be 2 spaces more than the start of the
enclosing keyword. This doesn't matter functionally, but affects running
scripts which do transforms on the schema files.

Signed-off-by: Rob Herring 
Acked-by: Maxime Ripard 
Acked-by: Lee Jones 
Acked-By: Vinod Koul 
Acked-by: Mark Brown 
Acked-by: Alexandre Belloni 
Signed-off-by: Rob Herring

dt-bindings: touchscreen: edt-ft5x06: Remove unneeded I2C unit name

2020-04-14T20:41:13+00:00

The following warnings are seen with 'make dt_binding_check':

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_vs_reg): /example-0/i2c@00000000: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_format): /example-0/i2c@00000000: unit name should not have leading 0s

Fix it by removing the unneeded i2c unit name.

Signed-off-by: Fabio Estevam 
Signed-off-by: Rob Herring