Pull input updates from Dmitry Torokhov:

 - a new driver for ADC driven joysticks

 - a new Zintix touchscreen driver

 - enhancements to Intel SoC button array driver

 - support for F3A "function" in Synaptics RMI4 driver

 - assorted driver fixups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
  Input: Add MAINTAINERS entry for SiS i2c touch input driver
  Input: evdev - per-client waitgroups
  Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1
  Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2
  Input: synaptics-rmi4 - support bootloader v8 in f34v7
  Input: synaptics-rmi4 - add support for F3A
  Input: synaptics-rmi4 - rename f30_data to gpio_data
  Input: add zinitix touchscreen driver
  dt-bindings: input/touchscreen: add bindings for zinitix
  Input: joystick - add ADC attached joystick driver.
  dt-bindings: input: Add docs for ADC driven joystick
  Input: sun4i-ps2 - fix handling of platform_get_irq() error
  Input: twl4030_keypad - fix handling of platform_get_irq() error
  Input: omap4-keypad - fix handling of platform_get_irq() error
  Input: ep93xx_keypad - fix handling of platform_get_irq() error
  Input: stmfts - fix a & vs && typo
  Input: imx6ul_tsc - unify open/close and PM paths
  Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()
  Input: elants_i2c - fix typo for an attribute to show calibration count
  Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information.
  ...

In order to add meta-schema checks for additional/unevaluatedProperties
being present, all schema need to make this explicit. As common/shared
schema are included by other schemas, they should always allow for
additionalProperties.

Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005183830.486085-5-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

This patch adds dts bindings for the zinitix bt541 touchscreen.

Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201001122949.16846-2-michael.srba@seznam.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Clean-up incorrect indentation, extra spaces, long lines, and missing
EOF newline in schema files. Most of the clean-ups are for list
indentation which should always be 2 spaces more than the preceding
keyword.

Found with yamllint (which I plan to integrate into the checks).

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull input updates from Dmitry Torokhov:

 - an update to Elan touchpad controller driver supporting newer ICs
   with enhanced precision reports and a new firmware update process

 - an update to EXC3000 touch controller supporting additional parts

 - assorted driver fixups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits)
  Input: exc3000 - add support to query model and fw_version
  Input: exc3000 - add reset gpio support
  Input: exc3000 - add EXC80H60 and EXC80H84 support
  dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema
  Input: sentelic - fix error return when fsp_reg_write fails
  Input: alps - remove redundant assignment to variable ret
  Input: ims-pcu - return error code rather than -ENOMEM
  Input: elan_i2c - add ic type 0x15
  Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
  Input: uinput - fix typo in function name documentation
  Input: ati_remote2 - add missing newlines when printing module parameters
  Input: psmouse - add a newline when printing 'proto' by sysfs
  Input: synaptics-rmi4 - drop a duplicated word
  Input: elan_i2c - add support for high resolution reports
  Input: elan_i2c - do not constantly re-query pattern ID
  Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14
  Input: elan_i2c - handle firmware updated on newer ICs
  Input: elan_i2c - add support for different firmware page sizes
  Input: elan_i2c - fix detecting IAP version on older controllers
  Input: elan_i2c - handle devices with patterns above 1
  ...

Add basic support for an optional reset gpio.

Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200805160520.456570-4-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This adds support for EXC80H60 and EXCH84 controllers, which
use a different event type id and have two extra bits for the
resolution (so the maximum is 16K instead of 4K).

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200805160520.456570-3-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the EETI EXC3000 binding to DT schema format using json-schema

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200805160520.456570-2-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Pull input updates from Dmitry Torokhov:

 - a new driver for the Azoteq IQS269A capacitive touch controller

 - a new driver for the Cypress CY8CTMA140 touchscreen

 - updates to Elan and ft5x06 touchscreen drivers

 - assorted driver fixes

 - msm-vibrator has been removed as we have a more generic solution

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits)
  Input: adi - work around module name confict
  Input: iqs269a - add missing I2C dependency
  Input: elants - refactor elants_i2c_execute_command()
  Input: elants - override touchscreen info with DT properties
  Input: elants - remove unused axes
  Input: add support for Azoteq IQS269A
  dt-bindings: input: Add bindings for Azoteq IQS269A
  Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups
  Input: remove msm-vibrator driver
  dt-bindings: Input: remove msm-vibrator
  Input: elants_i2c - provide an attribute to show calibration count
  Input: introduce input_mt_report_slot_inactive()
  dt-bindings: input: touchscreen: elants_i2c: convert to YAML
  Input: add driver for the Cypress CY8CTMA140 touchscreen
  dt-bindings: touchscreen: Add CY8CTMA140 bindings
  Input: edt-ft5x06 - prefer asynchronous probe
  Input: edt-ft5x06 - improve power management operations
  Input: edt-ft5x06 - move parameter restore into helper
  Input: edt-ft5x06 - fix get_default register write access
  Input: atkbd - receive and use physcode->keycode mapping from FW
  ...