Pull input updates from Dmitry Torokhov: "A new driver for slidebar on Ideapad laptops and a bunch of assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (32 commits) Input: add SYN_MAX and SYN_CNT constants Input: max11801_ts - convert to devm Input: egalax-ts - fix typo and improve text Input: MAINTAINERS - change maintainer for cyttsp driver Input: cyttsp4 - kill 'defined but not used' compiler warnings Input: add driver for slidebar on Lenovo IdeaPad laptops Input: omap-keypad - set up irq type from DT Input: omap-keypad - enable wakeup capability for keypad. Input: omap-keypad - clear interrupts on open Input: omap-keypad - convert to threaded IRQ Input: omap-keypad - use bitfiled instead of hardcoded values Input: cyttsp4 - remove useless NULL test from cyttsp4_watchdog_timer() Input: wacom - fix error return code in wacom_probe() Input: as5011 - fix error return code in as5011_probe() Input: keyboard, serio - simplify use of devm_ioremap_resource Input: tegra-kbc - simplify use of devm_ioremap_resource Input: htcpen - fix incorrect placement of __initdata Input: qt1070 - add power management ops Input: wistron_btns - add MODULE_DEVICE_TABLE Input: wistron_btns - mark the Medion MD96500 keymap as tested ...
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch adds DT support to touch driver. It also provides a binding document which is used by the MFD and IIO part of the device. This patch also renames steps_to_configure to coordinate_readouts because the original name misleads the purpose of the variable. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We add the possibility to hand over a GPIO number for the reset pin. This way we can remove existing board code that takes care of it and group this information properly in the platform data or in the device tree configuration. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge with mainline to bring in module_platform_driver_probe() and devm_ioremap_resource().
Add the necessary code to create the needed platformdata from devicetree informations. The interrupt mode of the chip is not set via devicetree, as it is not a property of the hardware but instead only a preferred type of operation. This should probably be made settable via configfs in the future. The option set as default is the mode the datasheet mentions as default. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull second round of input updates from Dmitry Torokhov: "As usual, there are a couple of new drivers, input core now supports managed input devices (devres), a slew of drivers now have device tree support and a bunch of fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits) Input: walkera0701 - fix crash on startup Input: matrix-keymap - provide a proper module license Input: gpio_keys_polled - switch to using gpio_request_one() Input: gpio_keys - switch to using gpio_request_one() Input: wacom - fix touch support for Bamboo Fun CTH-461 Input: xpad - add a few new VID/PID combinations Input: xpad - minor formatting fixes Input: gpio-keys-polled - honor 'autorepeat' setting in platform data Input: tca8418-keypad - switch to using managed resources Input: tca8418_keypad - increase severity of failures in probe() Input: tca8418_keypad - move device ID tables closer to where they are used Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data Input: tca8418_keypad - use a temporary variable for parent device Input: tca8418_keypad - add support for shared interrupt Input: tca8418_keypad - add support for device tree bindings Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver Input: bu21013_ts - add support for Device Tree booting Input: bu21013_ts - move GPIO init and exit functions into the driver Input: bu21013_ts - request regulator that actually exists ARM: ux500: Strip out duplicate touch screen platform information ...
This patch allows the STMPE Touchscreen driver to be successfully probed and initialised when Device Tree support is enabled. Bindings are mentioned in Documentation too. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linux 3.7-rc4
From Lee Jones: * 'ste-dt-for-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500: (31 commits) ARM: ux500: Convert DT_MACHINE_START to use SMP operations ARM: ux500: CONFIG: Enable GPIO Regulators ARM: ux500: Change the type of interrupt to something compatible ARM: ux500: Add node for the MMC GPIO regulator ARM: ux500: List DT compatibility using platform names rather than by board ARM: ux500: Remove duplicate DT_MACHINE_START - make u8500 for generic ARM: ux500: Rename references to the ccu9540 dev board accordingly ARM: ux500: Enable all MMC devices on the u9540 when booting with DT ARM: ux500: Enable SDI4 port on the u9540 when booting with Device Tree ARM: ux500: Add UART support to the u9540 Device Tree ARM: ux500: Add support for ST-Ericsson's u9540 SoC ARM: ux500: Add skeleton DTS file for the u9540 ARM: ux500: Remove unused board compatible string ARM: ux500: Supply the STMPE keypad Device Tree node to the STUIB DT ARM: ux500: Apply a Device Tree node for the STMPE MFD ARM: ux500: Stop informing the regulator subsystem that we have full constraints ARM: ux500: Add all bu21013 touch screen components to supported Device Trees ARM: ux500: Stop calling the UIB init function when using Device Tree ARM: ux500: Create a new Device Tree include file for boards supporting STUIBs Documentation: Detail permitted DT properties for the BU21013 Touch Screen ...