arm64: zynqmp: SoC CLK changes for v4.20 This patchset adds CCF compliant clock driver for ZynqMP. Clock driver queries supported clock information from firmware and regiters pll and output clocks with CCF. * tag 'zynqmp-soc-clk-for-v4.20' of https://github.com/Xilinx/linux-xlnx: drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add documentation to describe Xilinx ZynqMP clock driver bindings. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Qualcomm ARM Based Driver Updates for v4.20 * Refactor of SCM compatibles and clock requirements * SMEM cleanup * Add LLCC EDAC driver * Fixes for GENI clocks and macros * Fix includes for llcc-slice and smem * String overflow fixes for APR and wcnss_ctrl * Fixup for COMPILE_TEST of qcom driver Kconfigs * Cleanup of Kconfig depends of rpmh, smd_rpm, smsm, and smp2p * Add SCM dependencies to SPM and rmtfs-mem * tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits) soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get() soc: qcom: geni: Make version macros simpler dt-bindings: firmware: scm: Add MSM8998 and SDM845 firmware: qcom: scm: Refactor clock handling dt-bindings: firmware: scm: Refactor compatibles and clocks soc: qcom: smem: a few last cleanups soc: qcom: smem: verify partition host ids match soc: qcom: smem: small change in global entry loop soc: qcom: smem: verify partition offset_free_uncached soc: qcom: smem: verify partition header size soc: qcom: smem: introduce qcom_smem_partition_header() soc: qcom: smem: require order of host ids to match soc: qcom: smem: verify both host ids in partition header soc: qcom: smem: small refactor in qcom_smem_enumerate_partitions() soc: qcom: smem: always ignore partitions with 0 offset or size soc: qcom: smem: initialize region struct only when successful soc: qcom: smem: rename variable in qcom_smem_get_global() drivers: qcom: rpmh-rsc: clear wait_for_compl after use soc: qcom: rmtfs-mem: Validate that scm is available ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add documentation to describe Xilinx ZynqMP firmware driver bindings. Firmware driver provides an interface to firmware APIs. Interface APIs can be used by any driver to communicate to PMUFW (Platform Management Unit). Signed-off-by: Rajan Vaja <rajanv@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Now that the compatible/clock handling is reworked add compatibles for MSM8998 and SDM845 to the SCM binding. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
When the binding was written all "future" platforms required three clocks, so the default compatible (qcom,scm) was defined to require this. But as history shows all "future" platforms actually lack required clocks. Given how the binding is written these compatibles have to be added as an exception to the default. Refactor the description of compatible to define that a platform compatible should be given, followed by the fallback of qcom,scm. Also refactor the description of the clocks in a way that this does not need to be updated as new platform specific compatibles are added. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the compatible for ipq4019. This does not need clocks to do scm calls. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:
New drivers:
- driver support for Renesas R-Car V3M (R8A77970)
- power management support for Amlogic GX
- a new driver for the Tegra BPMP thermal sensor
- a new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families
- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi
Changes specific to some ARM-based SoC
- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well
- several changes for power management on Broadcom SoCs
- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek
- minor Cleanups for Samsung, TI OMAP SoCs"
[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.
The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
In order to aid post-mortem debugging the Qualcomm platforms provide a "memory download mode", where the boot loader will provide an interface for custom tools to "download" the content of RAM to a host machine. The mode is triggered by writing a magic value somewhere in RAM, that is read in the boot code path after a warm-restart. Two mechanism for setting this magic value are supported in modern platforms; a direct SCM call to enable the mode or through a secure io write of a magic value. In order for a normal reboot not to trigger "download mode" the magic must be cleared during a clean reboot. Download mode has to be enabled by including qcom_scm.download_mode=1 on the command line. Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>