linux.git/Documentation/devicetree/bindings/drm, branch v3.19

drm: imx: Move imx-drm driver out of staging

2014-11-25T23:40:39+00:00

The imx-drm driver was put into staging mostly for the following reasons,
all of which have been addressed or superseded:
 - convert the irq driver to use linear irq domains
 - work out the device tree bindings, this lead to the common of_graph
   bindings being used
 - factor out common helper functions, this mostly resulted in the
   component framework and drm of_graph helpers.

Before adding new fixes, and certainly before adding new features,
move it into its proper place below drivers/gpu/drm.

Signed-off-by: Philipp Zabel 
Signed-off-by: Dave Airlie

drm/tilcdc: panel: Add support for enable GPIO

2014-09-17T00:55:27+00:00

In order to support the "enable GPIO" available in many panel devices,
this commit adds a proper devicetree binding.

By providing an enable GPIO in the devicetree, the driver can now turn
off and on the panel device, and/or the backlight device. Both the
backlight and the GPIO are optional properties.

Tested-by: Darren Etheridge 
Tested-by: Johannes Pointner 
Signed-off-by: Ezequiel Garcia 
Signed-off-by: Dave Airlie

drm/tilcdc: panel: Fix backlight devicetree support

2014-09-17T00:55:10+00:00

The current backlight support is broken; the driver expects a backlight-class
in the panel devicetree node. Fix this by implementing it properly, getting
an optional backlight from a phandle.

This shouldn't cause any backward-compatibility DT issue because the current
implementation doesn't work and is not even documented.

Tested-by: Darren Etheridge 
Tested-by: Johannes Pointner 
Signed-off-by: Ezequiel Garcia 
Signed-off-by: Dave Airlie

Merge branch 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox into drm-next

2014-08-04T23:26:09+00:00

This builds upon the previous set of fixes which were pulled on 6th July.
Included in this set are:
- an update from Jean-Francois to add the missing reg documentation entry
  to the device tree documentation.
- conversion of the tda998x driver to the component helpers.

* 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
  drm/i2c: tda998x: add component support
  drm/i2c: tda998x: allow re-use of tda998x support code
  drm/i2c: tda998x: fix lack of required reg in DT documentation

Conflicts:
	drivers/gpu/drm/i2c/tda998x_drv.c

drm/msm: DT support for 8960/8064 (v3)

2014-08-04T15:55:28+00:00

Now that we (almost) have enough dependencies in place (MMCC, RPM, etc),
add necessary DT support so that we can use drm/msm on upstream kernel.

v2: update for review comments
v3: rebase on component helper changes

Signed-off-by: Rob Clark

dt-bindings: add Marvell Dove LCD controller documentation

2014-07-11T14:40:16+00:00

Add the Marvell Dove LCD controller DT binding documentation.  The
clock names used here are intentionally taken from the specification
for the Dove SoC.

Signed-off-by: Russell King

drm/i2c: tda998x: fix lack of required reg in DT documentation

2014-07-02T15:25:22+00:00

The I2C address (reg) is required for the TDA998x driver to be loaded
and initialized.

Signed-off-by: Jean-Francois Moine 
Signed-off-by: Russell King

drm/bridge: Add PTN3460 bridge driver

2014-03-23T15:36:37+00:00

This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS
bridge chip.

Signed-off-by: Sean Paul 
Signed-off-by: Inki Dae

drm/i2c: tda998x: add DT documentation

2014-02-13T19:41:53+00:00

Acked-by: Russell King 
Signed-off-by: Jean-Francois Moine 
Signed-off-by: Russell King

drm/tilcdc: adding some more devicetree config

2013-06-27T23:12:23+00:00

Adding support for max-pixelclock and max-width device tree
entries. As some devices that use the tilcdc hardware module
have restrictions on the allowed/tested values.  Also update DT
bindings document to reflect new parameters.

Signed-off-by: Darren Etheridge 
Acked-by: Rob Clark 
Signed-off-by: Dave Airlie