linux.git/Documentation/devicetree/bindings/dma, branch v5.5

dt-bindings: Change maintainer address

2019-12-13T00:38:10+00:00

While my email address has changed for a while, all the schemas I
contributed still have the old one unfortunately. Update it.

Signed-off-by: Maxime Ripard 
Signed-off-by: Rob Herring

Merge tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2019-12-02T19:41:35+00:00

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

Merge tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2019-12-02T19:00:19+00:00

Pull dmaengine updates from Vinod Koul:
 "Here are the changes this time around, couple of new drivers and
  updates to few more:

   - New drivers for SiFive PDMA, Socionext Milbeaut HDMAC and XDMAC,
     Freescale dpaa2 qDMA

   - Support for X1000 in JZ4780

   - Xilinx dma updates and support for Xilinx AXI MCDM controller

   - New bindings for rcar R8A774B1

   - Minor updates to dw, dma-jz4780, ti-edma, sprd drivers"

* tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (61 commits)
  dmaengine: Fix Kconfig indentation
  dmaengine: sf-pdma: move macro to header file
  dmaengine: sf-pdma: replace /** with /* for non-function comment
  dmaengine: ti: edma: fix missed failure handling
  dmaengine: mmp_pdma: add missed of_dma_controller_free
  dmaengine: mmp_tdma: add missed of_dma_controller_free
  dmaengine: sprd: Add wrap address support for link-list mode
  MAINTAINERS: Add Green as SiFive PDMA driver maintainer
  dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00
  dt-bindings: dmaengine: sf-pdma: add bindins for SiFive PDMA
  dmaengine: zx: remove: removed dmam_pool_destroy
  dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq fails
  dmaengine: iop-adma: clean up an indentation issue
  dmaengine: milbeaut-xdmac: remove redundant error log
  dmaengine: milbeaut-hdmac: remove redundant error log
  dmaengine: dma-jz4780: add missed clk_disable_unprepare in remove
  dmaengine: JZ4780: Add support for the X1000.
  dt-bindings: dmaengine: Add X1000 bindings.
  dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support
  dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle
  ...

dt-bindings: dmaengine: sf-pdma: add bindins for SiFive PDMA

2019-11-14T07:10:45+00:00

Add DT bindings document for Platform DMA(PDMA) driver of board,
HiFive Unleashed Rev A00.

Reviewed-by: Rob Herring 
Reviewed-by: Pragnesh Patel 
Signed-off-by: Green Wan 
Link: https://lore.kernel.org/r/20191107084955.7580-2-green.wan@sifive.com
Signed-off-by: Vinod Koul

dt-bindings: dmaengine: Add X1000 bindings.

2019-11-06T17:09:58+00:00

Add the dmaengine bindings for the X1000 Soc from Ingenic.

Signed-off-by: Zhou Yanjie 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/1571937670-30828-2-git-send-email-zhouyanjie@zoho.com
Signed-off-by: Vinod Koul

dt-bindings: dmaengine: xilinx_dma: Add binding for Xilinx MCDMA IP

2019-11-06T17:07:22+00:00

Add devicetree binding for Xilinx AXI Multichannel Direct Memory Access
(AXI MCDMA) IP. The AXI MCDMA provides high-bandwidth direct memory
access between memory and AXI4-Stream target peripherals. The AXI MCDMA
core provides a scatter-gather interface with multiple channel support
with independent configuration.

Signed-off-by: Radhey Shyam Pandey 
Acked-by: Rob Herring 
Link: https://lore.kernel.org/r/1571763622-29281-4-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul

dt-bindings: dmaengine: xilinx_dma: Fix formatting and style

2019-11-06T17:07:22+00:00

Trivial formatting(keep compatible string one per line, caps change etc).
It doesn't modify the content of the binding.

Signed-off-by: Radhey Shyam Pandey 
Acked-by: Rob Herring 
Link: https://lore.kernel.org/r/1571763622-29281-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul

dt-bindings: dmaengine: xilinx_dma: Remove axidma multichannel support

2019-11-06T17:07:21+00:00

The AXI DMA multichannel support is deprecated in the IP and it is no
longer actively supported. For multichannel support, refer to the AXI
multichannel direct memory access IP product guide(PG228) and MCDMA
driver(added in the subsequent commits). Inline with it remove axidma
multichannel optional properties i.e xlnx,mcdma and dma-channels from
the binding description.

Signed-off-by: Radhey Shyam Pandey 
Acked-by: Rob Herring 
Link: https://lore.kernel.org/r/1571763622-29281-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul

dt-bindings: Remove FIXME in yaml bindings

2019-11-06T04:23:46+00:00

Some binding that were introduced early on got a comment to enable
additionalProperties, but we couldn't due to the generic properties being
reported as errors.

The way we're dealing with this now is to use the draft-08's
unevaluatedProperties (even though the tools doesn't do anything with it
yet).

Let's convert those old bindings to it.

Signed-off-by: Maxime Ripard 
Signed-off-by: Rob Herring

dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA

2019-11-05T17:00:28+00:00

Similarly to paRAM slots, channels can be used by other cores.

The common dma-channel-mask property can be used for specifying the
available channels.

Signed-off-by: Peter Ujfalusi 
Reviewed-by: Rob Herring 
Link: https://lore.kernel.org/r/20191025073056.25450-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul