linux.git/Documentation/devicetree/bindings/dma, branch v3.11 Linux kernel source tree Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma 2013-07-07T18:11:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-07-07T18:11:43+00:00 d2b4a646717153a1a180b64d4a8464054dbd700e Pull slave-dmaengine updates from Vinod Koul: "Once you have some time from extended weekend celebrations please consider pulling the following to get: - Various fixes and PCI driver for dw_dmac by Andy - DT binding for imx-dma by Markus & imx-sdma by Shawn - DT fixes for dmaengine by Lars - jz4740 dmac driver by Lars - and various fixes across the drivers" What "extended weekend celebrations"? I'm in the merge window, who has time for extended celebrations.. * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits) DMA: shdma: add DT support DMA: shdma: shdma_chan_filter() has to be in shdma-base.h DMA: shdma: (cosmetic) don't re-calculate a pointer dmaengine: at_hdmac: prepare clk before calling enable dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors() dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding ARM: at91: dt: add header to define at_hdmac configuration MIPS: jz4740: Correct clock gate bit for DMA controller MIPS: jz4740: Remove custom DMA API MIPS: jz4740: Register jz4740 DMA device dma: Add a jz4740 dmaengine driver MIPS: jz4740: Acquire and enable DMA controller clock dma: mmp_tdma: disable irq when disabling dma channel dmaengine: PL08x: Avoid collisions with get_signal() macro dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically dma: dw: add PCI part of the driver dma: dw: split driver to library part and platform code dma: move dw_dmac driver to an own directory dw_dmac: don't check resource with devm_ioremap_resource ... 
Pull slave-dmaengine updates from Vinod Koul:
 "Once you have some time from extended weekend celebrations please
  consider pulling the following to get:
   - Various fixes and PCI driver for dw_dmac by Andy
   - DT binding for imx-dma by Markus & imx-sdma by Shawn
   - DT fixes for dmaengine by Lars
   - jz4740 dmac driver by Lars
   - and various fixes across the drivers"

What "extended weekend celebrations"?  I'm in the merge window, who has
time for extended celebrations..

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits)
  DMA: shdma: add DT support
  DMA: shdma: shdma_chan_filter() has to be in shdma-base.h
  DMA: shdma: (cosmetic) don't re-calculate a pointer
  dmaengine: at_hdmac: prepare clk before calling enable
  dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions
  dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()
  dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding
  ARM: at91: dt: add header to define at_hdmac configuration
  MIPS: jz4740: Correct clock gate bit for DMA controller
  MIPS: jz4740: Remove custom DMA API
  MIPS: jz4740: Register jz4740 DMA device
  dma: Add a jz4740 dmaengine driver
  MIPS: jz4740: Acquire and enable DMA controller clock
  dma: mmp_tdma: disable irq when disabling dma channel
  dmaengine: PL08x: Avoid collisions with get_signal() macro
  dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically
  dma: dw: add PCI part of the driver
  dma: dw: split driver to library part and platform code
  dma: move dw_dmac driver to an own directory
  dw_dmac: don't check resource with devm_ioremap_resource
  ...
DMA: shdma: add DT support 2013-07-05T06:11:00+00:00 Guennadi Liakhovetski g.liakhovetski@gmx.de 2013-06-18T16:16:57+00:00 67eacc1583909d0588c8d5d80c16298c899a6382 This patch adds Device Tree support to the shdma driver. No special DT properties are used, only standard DMA DT bindings are implemented. Since shdma controllers reside on SoCs, their configuration is SoC-specific and shall be passed to the driver from the SoC platform data, using the auxdata procedure. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
This patch adds Device Tree support to the shdma driver. No special DT
properties are used, only standard DMA DT bindings are implemented. Since
shdma controllers reside on SoCs, their configuration is SoC-specific and
shall be passed to the driver from the SoC platform data, using the
auxdata procedure.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding 2013-07-05T06:10:54+00:00 Ludovic Desroches ludovic.desroches@atmel.com 2013-06-13T08:39:39+00:00 62971b29825adb06908bad81e7679d1f7904b24d For most devices the FIFO configuration is the same i.e. when half FIFO size is available/filled, a source/destination request is serviced. But USART devices have to do it when there is enough space/data available to perform a single AHB access so the ASAP configuration. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> 
For most devices the FIFO configuration is the same i.e. when half FIFO size is
available/filled, a source/destination request is serviced. But USART devices
have to do it when there is enough space/data available to perform a single
AHB access so the ASAP configuration.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
dma: imx-sdma: move to generic device tree bindings 2013-07-05T06:10:40+00:00 Shawn Guo shawn.guo@linaro.org 2013-05-30T14:23:32+00:00 9479e17c9bb455c01b369d294e01de8fa9b0a8d3 Update imx-sdma driver to adopt generic DMA device tree bindings. It calls of_dma_controller_register() with imx-sdma specific of_dma_xlate to get the generic DMA device tree helper support. The #dma-cells for imx-sdma must be 3, which includes request ID, peripheral type and priority. The existing way of requesting channel, clients directly call dma_request_channel(), still work there, and will be removed after all imx-sdma clients get converted to generic DMA device tree helper. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 
Update imx-sdma driver to adopt generic DMA device tree bindings.  It
calls of_dma_controller_register() with imx-sdma specific of_dma_xlate
to get the generic DMA device tree helper support.  The #dma-cells for
imx-sdma must be 3, which includes request ID, peripheral type and
priority.

The existing way of requesting channel, clients directly call
dma_request_channel(), still work there, and will be removed after
all imx-sdma clients get converted to generic DMA device tree helper.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
dma: imx-dma: Add oftree support 2013-07-05T06:10:26+00:00 Markus Pargmann mpa@pengutronix.de 2013-05-26T09:53:20+00:00 290ad0f9d954b445788bf26652b239c59cec2060 Adding devicetree support for imx-dma driver. Use driver name for function 'imx_dma_is_general_purpose' because the devicename for devicetree initialized devices is different. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 
Adding devicetree support for imx-dma driver. Use driver name for
function 'imx_dma_is_general_purpose' because the devicename for
devicetree initialized devices is different.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2013-07-02T21:33:21+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-07-02T21:33:21+00:00 0bf6a210a43f7118d858806200127e421649fc4e Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ... 
Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...
Merge tag 'davinci-for-v3.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc 2013-06-24T14:46:23+00:00 Arnd Bergmann arnd@arndb.de 2013-06-24T14:46:23+00:00 8ecb6ca61ac673f3712f82259de5b0a25d21d532 From Sekhar Nori: DaVinci SoC updates for v3.11 - part 2 This pull request adds DT and runtime PM to EDMA ARM private API so it can be used on DT enabled DaVinci and OMAP platforms. Also adds DMA channel crossbar mapping support to be used by DT-enabled platforms which use it. * tag 'davinci-for-v3.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding ARM: edma: Convert to devm_* api Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
From Sekhar Nori:

DaVinci SoC updates for v3.11 - part 2

This pull request adds DT and runtime PM to
EDMA ARM private API so it can be used on
DT enabled DaVinci and OMAP platforms.

Also adds DMA channel crossbar mapping
support to be used by DT-enabled platforms
which use it.

* tag 'davinci-for-v3.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  ARM: edma: Convert to devm_* api

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dmaengine: edma: Add TI EDMA device tree binding 2013-06-24T08:32:02+00:00 Matt Porter mdp@ti.com 2013-06-20T21:06:37+00:00 bf3156dde3b6718e843152e826a493f80b973655 The binding definition is based on the generic DMA controller binding. Joel: * Droped reserved and queue DT entries from Documentation for now from the original patch series (v10) * Included properties in Documentation and clarified DMA properties (V11) * Made ti,hwmod option * Clarified DMA entries Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Joel A Fernandes <joelagnel@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> 
The binding definition is based on the generic DMA controller
binding.

Joel:
* Droped reserved and queue DT entries from Documentation
for now from the original patch series (v10)
* Included properties in Documentation and clarified DMA properties (V11)
* Made ti,hwmod option
* Clarified DMA entries

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matt Porter <mporter@ti.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
dma: coh901318: add devicetree support 2013-06-17T11:54:27+00:00 Linus Walleij linus.walleij@linaro.org 2013-04-19T11:42:55+00:00 faadc6e3d5e0ab718dc1e131fb14bbb52f144238 This adds support for probing the COH 901 318 DMA controller and channels from the device tree. Contains portions of a sketch patch from Arnd Bergmann. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This adds support for probing the COH 901 318 DMA controller
and channels from the device tree.

Contains portions of a sketch patch from Arnd Bergmann.

Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
dmaengine: ste_dma40: Fetch disabled channels from DT 2013-06-04T09:12:12+00:00 Lee Jones lee.jones@linaro.org 2013-05-15T09:52:02+00:00 499c2bc3cc89dcbbf08aa526cd4a984b92a4d2a8 Some platforms have channels which are not available for normal use. This information is currently passed though platform data in internal BSP kernels. Once those platforms land, they'll need to configure them appropriately, so we may as well add the infrastructure. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Some platforms have channels which are not available for normal use.
This information is currently passed though platform data in internal
BSP kernels. Once those platforms land, they'll need to configure them
appropriately, so we may as well add the infrastructure.

Cc: Dan Williams <djbw@fb.com>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Rabin Vincent <rabin@rab.in>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>