Pull devicetree fixes from Rob Herring:

 - Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
   applied for nios2, but never sent upstream.

 - Fix extra '/' in fsl,ls1028a-reset '$id' path

 - Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.

* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: serial: Convert altr,uart-1.0 to DT schema
  dt-bindings: serial: Convert altr,juart-1.0 to DT schema
  dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
  dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings

The kernel test robot reported a warning related to the use of "$ref"
type definitions for custom endpoint properties
- "ti,lvds-vod-swing-clock-microvolt" and
- "ti,lvds-vod-swing-data-microvolt".

Using "$ref" with "uint32-array" is not correctly handled in this
context. Removing "$ref" and relying solely on "maxItems: 2" enforces
the intended requirement of specifying exactly two values, without
triggering a schema validation warning.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505021937.efnQPPqx-lkp@intel.com/
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Link: https://lore.kernel.org/r/20250529053654.1754926-1-andrej.picej@norik.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Pull non-MM updates from Andrew Morton:

 - "hung_task: extend blocking task stacktrace dump to semaphore" from
   Lance Yang enhances the hung task detector.

   The detector presently dumps the blocking tasks's stack when it is
   blocked on a mutex. Lance's series extends this to semaphores

 - "nilfs2: improve sanity checks in dirty state propagation" from
   Wentao Liang addresses a couple of minor flaws in nilfs2

 - "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
   fixes a couple of issues in the gdb scripts

 - "Support kdump with LUKS encryption by reusing LUKS volume keys" from
   Coiby Xu addresses a usability problem with kdump.

   When the dump device is LUKS-encrypted, the kdump kernel may not have
   the keys to the encrypted filesystem. A full writeup of this is in
   the series [0/N] cover letter

 - "sysfs: add counters for lockups and stalls" from Max Kellermann adds
   /sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
   /sys/kernel/rcu_stall_count

 - "fork: Page operation cleanups in the fork code" from Pasha Tatashin
   implements a number of code cleanups in fork.c

 - "scripts/gdb/symbols: determine KASLR offset on s390 during early
   boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
   scripts

* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
  llist: make llist_add_batch() a static inline
  delayacct: remove redundant code and adjust indentation
  squashfs: add optional full compressed block caching
  crash_dump, nvme: select CONFIGFS_FS as built-in
  scripts/gdb/symbols: determine KASLR offset on s390 during early boot
  scripts/gdb/symbols: factor out pagination_off()
  scripts/gdb/symbols: factor out get_vmlinux()
  kernel/panic.c: format kernel-doc comments
  mailmap: update and consolidate Casey Connolly's name and email
  nilfs2: remove wbc->for_reclaim handling
  fork: define a local GFP_VMAP_STACK
  fork: check charging success before zeroing stack
  fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
  fork: clean-up ifdef logic around stack allocation
  kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
  kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
  x86/crash: make the page that stores the dm crypt keys inaccessible
  x86/crash: pass dm crypt keys to kdump kernel
  Revert "x86/mm: Remove unused __set_memory_prot()"
  crash_dump: retrieve dm crypt keys in kdump kernel
  ...

Pull SoC devicetree updates from Arnd Bergmann:
 "There are 11 newly supported SoCs, but these are all either new
  variants of existing designs, or straight reuses of the existing chip
  in a new package:

   - RK3562 is a new chip based on the old Cortex-A53 core, apparently a
     low-cost version of the Cortex-A55 based RK3568/RK3566.

   - NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
     set of on-chip peripherals.

   - Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
     family

   - Amlogic S6/S7/S7D

   - Samsung Exynos7870 is an older chip similar to Exynos7885

   - WonderMedia wm8950 is a minor variation on the wm8850 chip

   - Amlogic s805y is almost idential to s805x

   - Allwinner A523 is similar to A527 and T527

   - Qualcomm MSM8926 is a variant of MSM8226

   - Qualcomm Snapdragon X1P42100 is related to R1E80100

  There are also 65 boards, including reference designs for the chips
  above, this includes

   - 12 new boards based on TI K3 series chips, most of them from
     Toradex

   - 10 devices using Rockchips RK35xx and PX30 chips

   - 2 phones and 2 laptops based on Qualcomm Snapdragon designs

   - 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses

   - 3 Samsung Galaxy phones based on Exynos7870

   - 5 Allwinner based boards using a variety of ARMv8 chips

   - 9 32-bit machines, each based on a different SoC family

  Aside from the new hardware, there is the usual set of cleanups and
  newly added hardware support on existing machines, for a total of 965
  devicetree changesets"

* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
  MAINTAINERS, mailmap: update Sven Peter's email address
  arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
  arm64: dts: nuvoton: Add pinctrl
  ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
  arm64: dts: blaize-blzp1600: Enable GPIO support
  dt-bindings: clock: socfpga: convert to yaml
  arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
  arm64: dts: rockchip: fix rk3562 pcie unit addresses
  arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
  arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
  arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
  arm64: dts: rockchip: fix rk3576 pcie unit addresses
  arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
  arm64: dts: rockchip: Add missing SFC power-domains to rk3576
  Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
  arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
  arm64: dts: mt6359: Rename RTC node to match binding expectations
  arm64: dts: mt8365-evk: Add goodix touchscreen support
  arm64: dts: mediatek: mt8188: Add missing #reset-cells property
  arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
  ...

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Convert all remaining interrupt-controller bindings to DT schema

   - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
     PMC, imx-drm, and ftm-quaddec to DT schema

   - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
     maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard

   - Add top-level constraints for renesas,vsp1 and renesas,fcp

   - Add missing constraint in amlogic,pinctrl-a4 'group' nodes

   - Adjust the allowed properties for dwc3-xilinx, sony,imx219,
     pci-iommu, and renesas,dsi

   - Add EcoNet vendor prefix

   - Fix the reserved-memory.yaml in fsl,qman-fqd

   - Drop obsolete numa.txt and cpu-topology.txt which are schemas in
     dtschema now

   - Drop Renesas RZ/N1S bindings

   - Ensure Arm cpu nodes don't allow undocumented properties. Add all
     the properties which are in use and undocumented. Drop the Mediatek
     cpufreq binding which is not a binding, but just what DT properties
     the driver uses.

   - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU

   - Update documentation on defining child nodes with separate schemas

   - Add bindings to PSCI MAINTAINERS entry

  DT core:

   - Add new functions to simplify driver handling of 'memory-region'
     properties. Users to be added next cycle.

   - Simplify of_dma_set_restricted_buffer() to use
     of_for_each_phandle()

   - Add missing unlock on error in unittest_data_add()"

* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
  dt-bindings: timer: Add fsl,vf610-pit.yaml
  dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
  ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
  dt-bindings: arm/cpus: Allow 2 power-domains entries
  dt-bindings: usb: dwc3-xilinx: allow dma-coherent
  media: dt-bindings: sony,imx219: Allow props from video-interface-devices
  dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
  dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
  dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
  dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
  dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
  dt-bindings: trivial-devices: Add VZ89TE to trivial
  media: dt-bindings: renesas,vsp1: add top-level constraints
  media: dt-bindings: renesas,fcp: add top-level constraints
  dt-bindings: trivial-devices: Add Maxim max30208
  dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
  dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
  dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
  dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
  dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
  ...

Convert cdn-dp-rockchip.txt to yaml.

Add new "port@1" property which represents the CDN DP output to keep
the same style as the other display interfaces.

This patch also changes the constraints for "phys" and "extcon". For
the original binding, only one phy and the corresponding extcon can
be specified. In the new binding, one or two phys can be specified.
Since the RK3399 has two DP-USB PHYs, specifying one allows output
via the corresponding PHY, while specifying two lets the driver
choose one PHY for output. This rule also applies to extcon, which
provides the cable state for the corresponding PHY.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250520024718.142-3-kernel@airkyi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Additional MediaTek ARM64 DTS updates for v6.16

This addresses devicetree binding warnings happening on	the
MDP3 nodes in mt8188 dts, reverts the commit adding the SCP
firmware-name as strongly suggested by Arnd, and also adds
some more late commits.

In particular:
 - MT6359 PMIC
   - Renamed PMIC RTC node to fix dtbs_check warning
 - MT7988(A)
   - Support for SPI controllers was added to SoC and BPI-R4
   - Support for XSPHY, USB and	PCIe2 was added	as well
   - Fan and cooling maps were added to	BPI-R4 machine
   - Added BananaPi R4 2G5 machine variant
 - MT8365
   - Added touchscreen support to MT8365 Genio EVK
 - MT8188
   - Addressed dtbs_check warnings for MDP3 nodes
 - MT8390 (Genio)
   - Reverted SCP firmware-name	addition

* tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits)
  Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
  arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
  arm64: dts: mt6359: Rename RTC node to match binding expectations
  arm64: dts: mt8365-evk: Add goodix touchscreen support
  arm64: dts: mediatek: mt8188: Add missing #reset-cells property
  arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
  arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller
  arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes
  arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps
  arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes
  arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi
  arm64: dts: mediatek: mt7988: add spi controllers
  arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy
  arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2
  arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4
  dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant
  arm64: dts: mt6359: Add missing 'compatible' property to regulators node
  arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco
  arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host
  arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight
  ...

Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

I've used several email addresses and a previous name to contribute. 
Consolidate all of these to my primary email and update my name.

Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Allow to inherit valid properties from the dsi-controller. This fixes the
following warning when adding a panel property:

rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
    match any of the regexes: 'pinctrl-[0-9]+'
    from schema $id:
        http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#

Also add a panel property to the example.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250520151112.3278569-1-hugo@hugovil.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Updates for v6.16

CI:
- uprev mesa

GPU:
- ACD (Adaptive Clock Distribution) support for X1-85.  This is required
  enable the higher frequencies.
- Drop fictional `address_space_size`.  For some older devices, the address
  space size is limited to 4GB to avoid potential 64b rollover math problems
  in the fw.  For these, an `ADRENO_QUIRK_4GB_VA` quirk is added.  For
  everyone else we get the address space size from the SMMU `ias` (input
  address sizes), which is usually 48b.
- Improve robustness when GMU HFI responses time out
- Fix crash when throttling GPU immediately during boot
- Fix for rgb565_predicator on Adreno 7c3
- Remove `MODULE_FIRMWARE()`s for GPU, the GPU can load the firmware after
  probe and having partial set of fw (ie. sqe+gmu but not zap) causes problems

MDSS:
- Added SAR2130P support to MDSS driver

DPU:
- Changed to use single CTL path for flushing on DPU 5.x+
- Improved SSPP allocation code to allow sharing of SSPP between planes
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- Misc fixes

DP:
- Switch to use new helpers for DP Audio / HDMI codec handling
- Fixed LTTPR handling

DSI:
- Added support for SA8775P
- Added SAR2130P support

MDP4:
- Fixed LCDC / LVDS controller on

HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/CAF6AEGv2Go+nseaEwRgeZbecet-h+Pf2oBKw1CobCF01xu2XVg@mail.gmail.com