Pull drm updates from Dave Airlie: "Core: - Fence destaging work - DRIVER_LEGACY to split off legacy drm drivers - drm_mm refactoring - Splitting drm_crtc.c into chunks and documenting better - Display info fixes - rbtree support for prime buffer lookup - Simple VGA DAC driver Panel: - Add Nexus 7 panel - More simple panels i915: - Refactoring GEM naming - Refactored vma/active tracking - Lockless request lookups - Better stolen memory support - FBC fixes - SKL watermark fixes - VGPU improvements - dma-buf fencing support - Better DP dongle support amdgpu: - Powerplay for Iceland asics - Improved GPU reset support - UVD/VEC powergating support for CZ/ST - Preinitialised VRAM buffer support - Virtual display support - Initial SI support - GTT rework - PCI shutdown callback support - HPD IRQ storm fixes amdkfd: - bugfixes tilcdc: - Atomic modesetting support mediatek: - AAL + GAMMA engine support - Hook up gamma LUT - Temporal dithering support imx: - Pixel clock from devicetree - drm bridge support for LVDS bridges - active plane reconfiguration - VDIC deinterlacer support - Frame synchronisation unit support - Color space conversion support analogix: - PSR support - Better panel on/off support rockchip: - rk3399 vop/crtc support - PSR support vc4: - Interlaced vblank timing - 3D rendering CPU overhead reduction - HDMI output fixes tda998x: - HDMI audio ASoC support sunxi: - Allwinner A33 support - better TCON support msm: - DT binding cleanups - Explicit fence-fd support sti: - remove sti415/416 support etnaviv: - MMUv2 refactoring - GC3000 support exynos: - Refactoring HDMI DCC/PHY - G2D pm regression fix - Page fault issues with wait for vblank There is no nouveau work in this tree, as Ben didn't get a pull request in, and he was fighting moving to atomic and adding mst support, so maybe best it waits for a cycle" * tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits) drm/crtc: constify drm_crtc_index parameter drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code ...
Some boards have an entirely passive RGB to VGA bridge, based on DACs implemented by resistor ladders. Those might or might not have an i2c bus routed to the VGA connector in order to access the screen EDIDs. Add a bridge that doesn't do anything but expose the modes available on the screen, either based on the EDIDs if available, or based on the XGA standards. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com
drm/panel: Changes for v4.9-rc1 Adds support for one more panel to the simple-panel driver, fixes up a couple of delays and flags for existing panels and finally adds a new driver for the DSI panel found on Nexus 7 devices. * tag 'drm/panel/for-4.9-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel dt-bindings: Add JDI LT070ME05000 panel bindings drm/panel: simple: Fix bus_format for the Olimex LCD-OLinuXino-4.3TS drm/panel: simple-panel: Add delay timings for Starry KR122EA0SRA drm/panel: simple: Fix bus flags for Ortustech com43h4m85ulc drm/panel: simple: Add Innolux G101ICE-L01 panel drm/panel: simple: Add delay timing for Sharp LQ123P1JX31 drm/dsi: Implement DCS set/get display brightness drm/dsi: Order DCS helpers by command code
Second attempt for 3rd drm/tilcdc pull request for v4.9. * tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux: drm/tilcdc: fix wrong error handling drm/tilcdc: Return directly after a failed kfree_table_init() in tilcdc_convert_slave_node() drm/tilcdc: Remove "default" from blue-and-red-wiring property binding drm/tilcdc: Fix non static symbol warning drm/tilcdc: mark symbols static where possible drm/tilcdc: add missing header dependencies drm/tilcdc: WARN if CRTC is touched without CRTC lock drm/tilcdc: Take CRTC lock when calling tilcdc_crtc_disable() drm/tilcdc: Remove unnecessary tilcdc_crtc_disable() from tilcdc_unload() drm/tilcdc: Flush flip-work workqueue before drm_flip_work_cleanup() drm/tilcdc: Clean up LCDC functional clock rate setting code drm/tilcdc: Take crtc modeset lock while updating the crtc clock rate
Remove "default" keyword from blue-and-red-wiring devicetree property binding document. The code does not support and there is no intention to support it. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Jyri Sarha <jsarha@ti.com>
The JDI LT070ME05000 is a 7" panel with a 1200x1920 (WUXGA) resolution and connected to DSI using four lanes. Cc: Archit Taneja <archit.taneja@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch adds support for Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel to the simple-panel driver. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
Make the following changes in the HDMI gpio bindings: - Use "-gpios" as the suffix for all the gpio names - Move all the gpios to optional, since there are platforms that use none of them. - The HPD gpio is a standard one, remove the "qcom,hdmi-tx-" prefix from it. - Remove the HDMI DDC clk/data gpios. They are just leftovers of an old way to configure pinctrl properties. - Add a missing lpm gpio used on some platforms. Make the necessary changes in the driver to incorporate these changes. There hasn't been any upstream DT that uses the HDMI bindings, so it's okay to change and move around these properties. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Pull "CLCD graphics on the Nomadik NHK15" from Linus Walleij: * tag 'clcd-nomadik' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: add the CLCD LCD display to the NHK15 ARM: dts: add PMU to the NHK15 device tree ARM: nomadik: select MFD_SYSCON dt-bindings: Add TPO TPG110 binding dt-bindings: add vendor TPO ARM: dts: add STMPE PWM to the NHK15 device tree
This adds the ASoC codec interfaces for TDA998x HDMI audio from Jyri Sarha. * 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: dts: am335x-boneblack: Add HDMI audio support drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata