Merge drm updates from Dave Airlie:
"This is the main drm pull request for 4.8.
I'm down with a cold at the moment so hopefully this isn't in too bad
a state, I finished pulling stuff last week mostly (nouveau fixes just
went in today), so only this message should be influenced by illness.
Apologies to anyone who's major feature I missed :-)
Core:
Lockless GEM BO freeing
Non-blocking atomic work
Documentation changes (rst/sphinx)
Prep for new fencing changes
Simple display helpers
Master/auth changes
Register/unregister rework
Loads of trivial patches/fixes.
New stuff:
ARM Mali display driver (not the 3D chip)
sii902x RGB->HDMI bridge
Panel:
Support for new panels
Improved backlight support
Bridge:
Convert ADV7511 to bridge driver
ADV7533 support
TC358767 (DSI/DPI to eDP) encoder chip support
i915:
BXT support enabled by default
GVT-g infrastructure
GuC command submission and fixes
BXT workarounds
SKL/BKL workarounds
Demidlayering device registration
Thundering herd fixes
Missing pci ids
Atomic updates
amdgpu/radeon:
ATPX improvements for better dGPU power control on PX systems
New power features for CZ/BR/ST
Pipelined BO moves and evictions in TTM
GPU scheduler improvements
GPU reset improvements
Overclocking on dGPUs with amdgpu
Polaris powermanagement enabled
nouveau:
GK20A/GM20B volt and clock improvements.
Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.
exynos:
Exynos5433 SoC with IOMMU support.
vc4:
Shader validation for branching
imx-drm:
Atomic mode setting conversion
Reworked DMFC FIFO allocation
External bridge support
analogix-dp:
RK3399 eDP support
Lots of fixes.
rockchip:
Lots of small fixes.
msm:
DT bindings cleanups
Shrinker and madvise support
ASoC HDMI codec support
tegra:
Host1x driver cleanups
SOR reworking for DP support
Runtime PM support
omapdrm:
PLL enhancements
Header refactoring
Gamma table support
arcgpu:
Simulator support
virtio-gpu:
Atomic modesetting fixes.
rcar-du:
Misc fixes.
mediatek:
MT8173 HDMI support
sti:
ASOC HDMI codec support
Minor fixes
fsl-dcu:
Suspend/resume support
Bridge support
amdkfd:
Minor fixes.
etnaviv:
Enable GPU clock gating
hisilicon:
Vblank and other fixes"
* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
drm/amdgpu: add query device id and revision id into system info entry at CGS
drm/amdgpu: add new definition in bif header
drm/amd/powerplay: rename smum header guards
drm/amdgpu: enable UVD context buffer for older HW
drm/amdgpu: fix default UVD context size
drm/amdgpu: fix incorrect type of info_id
drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
drm/amdgpu: enable UVD VM only on polaris
drm/amdgpu: increase timeout of IB test
drm/amdgpu: add destroy session when generate VCE destroy msg.
drm/amd: fix deadlock of job_list_lock V2
...
Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
This adds drm bridge support for the NXP/Freescale DCU. The patchset has been discussed on the mailing list since quite some time... Plus there is a small fix provided by Peter. * 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: add support for drm bridge drm/fsl-dcu: rework codes to support of_graph dt binding for panel drm/fsl-dcu: add missing of_node_put after calling of_parse_phandle
This is an update to the previous drm bridge pull request. The ADV7511 driver's conversion from slave encoder to bridge meant that its users (the rcar-du kms driver) should use the bridge interface too. This pull request now also contains a commit that updates the rcar-du's hdmi encoder interface from slave encoder to bridge. The other updates are as before: - Converts the ADV7511 i2c slave encoder driver to a bridge driver. Adds support for the ADV7533 bridge chip. - Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips. * 'drm_bridge_for_4.8' of https://github.com/boddob/linux: drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder drm/bridge: tc358767: Add DPI to eDP bridge driver dt-bindings: tc358767: add DT documentation dt-bindings: drm/bridge: Update bindings for ADV7533 drm/bridge: adv7533: Change number of DSI lanes dynamically drm/bridge: adv7533: Use internal timing generator drm/bridge: adv7533: Create a MIPI DSI device drm/bridge: adv7533: Initial support for ADV7533 drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled drm/i2c: adv7511: Move to bridge folder drm/i2c: adv7511: Convert to drm_bridge
Add DT binding documentation for the Toshiba TC358767 eDP bridge. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Archit Taneja <architt@codeaurora.org>
The MDP4/5 DT node now contains a list of ports that describe how it connects to external encoder interfaces like DSI and HDMI. These follow the standard of_graph bindings, and allow us to get rid of the 'connectors' phandle that contained a list of all the external encoders connected to MDP. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a new doc for DT bindings for platforms that contain MDP5 display controller hardware. The doc describes bindings for the top level MDSS wrapper hardware and MDP5 itself. Add an example for the bindings as found in MSM8916. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
MDP4 and MDP5 vary a bit in terms of device hierarchy and the properties they require. Rename the binding doc to mdp4.txt and remove MDP5 specific pieces. A separate document will be created for MDP5 Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Some cleanups: - Use simpler names for DT nodes in the example - Use references instead of dumping Document links everywhere Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
The PLL in the DSI PHY block generates 2 clock outputs (Byte and Pixel clocks) that are fed into the Multimedia Clock Controller (MMCC). The MMCC uses these as source clocks for some of its RCGs to generate clocks that finally feed to the DSI host controller. Use the assigned clocks DT bindings to set up the MMCC RCGs that feed to the DSI host. Use the DSI PHY provided clocks to set up the parents of these assigned clocks. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>