linux.git/Documentation/devicetree/bindings/display/simple-framebuffer.yaml, branch v6.3

dt-bindings: display: simple-framebuffer: Document 32-bit BGR format

2023-01-23T14:01:30+00:00

This is a variant of the 32-bit RGB format where the red and blue
components are swapped.

Reviewed-by: Rob Herring 
Signed-off-by: Thierry Reding 
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-3-thierry.reding@gmail.com

dt-bindings: display: simple-framebuffer: Support system memory framebuffers

2023-01-23T14:01:02+00:00

In order to support framebuffers residing in system memory, allow the
memory-region property to override the framebuffer memory specification
in the "reg" property.

Reviewed-by: Rob Herring 
Signed-off-by: Thierry Reding 
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-2-thierry.reding@gmail.com

dt-bindings: Remove 'Device Tree Bindings' from end of title:

2022-08-25T19:06:57+00:00

As indicated in
link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/

DT schema files should not have 'Device Tree Binding' as part of there
title: line. Remove this in most .yaml files, so hopefully preventing
developers copying it into new .yaml files, and being asked to remove
it.

Signed-off-by: Andrew Lunn 
Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch
Signed-off-by: Rob Herring

dt-bindings: display: simple-framebuffer: Drop Bartlomiej Zolnierkiewicz

2022-08-09T20:19:43+00:00

Bartlomiej's Samsung email address is not working since around last
year and there was no follow up patch take over of the drivers, so drop
the email from maintainers.

Cc: Bartlomiej Zolnierkiewicz 
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Rob Herring 
Link: https://lore.kernel.org/r/20220808101526.46556-3-krzysztof.kozlowski@linaro.org

dt-bindings: simple-framebuffer: allow standalone compatible

2022-01-29T21:24:25+00:00

Qualcomm platforms use "simple-framebuffer" without a more specific
compatible. Allow that in the binding doc.

Signed-off-by: Luca Weiss 
Acked-by: Rob Herring 
Signed-off-by: Helge Deller

dt-bindings: display: sync formats with simplefb.h

2021-11-29T20:10:27+00:00

Sync all formats from simplefb.h into documentation.

Signed-off-by: David Heidelberg 
Link: https://lore.kernel.org/r/20211108183322.68192-1-david@ixit.cz
Signed-off-by: Rob Herring

dt-bindings: display: Add apple,simple-framebuffer

2021-04-08T11:18:41+00:00

Apple SoCs run firmware that sets up a simplefb-compatible framebuffer
for us. Add a compatible for it, and two missing supported formats.

Reviewed-by: Rob Herring 
Reviewed-by: Linus Walleij 
Signed-off-by: Hector Martin

dt-bindings: fix simple-framebuffer example

2020-07-10T19:00:24+00:00

Now that dt-extract-example gained support for using root nodes
in examples, update the example for the simple-frambuffer binding to use it.

This gives us a better example and kill a long standing warning:

simple-framebuffer.example.dts:23.16-39.11:
Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node

Note: To get the update dt-extract-example execute:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

v2:
  - fix spelling of framebuffer (Geert)
  - drop stdout-path (Rob)

Signed-off-by: Sam Ravnborg 
Reviewed-by: Rob Herring 
Cc: Geert Uytterhoeven 
Cc: Hans de Goede 
Cc: David Airlie 
Cc: Daniel Vetter 
Cc: Bartlomiej Zolnierkiewicz 
Cc: linux-fbdev@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200704143544.789345-2-sam@ravnborg.org

dt-bindings: Fix dtc warnings in examples

2020-02-28T20:15:52+00:00

Fix all the warnings in the DT binding schema examples when built with
'W=1'. This is in preparation to make that the default for examples.

Reviewed-by: Linus Walleij 
Acked-by: Stephen Boyd 
Acked-by: Sam Ravnborg 
Acked-by: Vinod Koul 
Acked-by: Lee Jones 
Acked-by: Srinivas Kandagatla 
Acked-by: Mark Brown 
Acked-by: Bartosz Golaszewski 
Cc: Daniel Lezcano 
Cc: Kishon Vijay Abraham I 
Cc: Ulf Hansson 
Cc: Dmitry Torokhov 
Cc: Krzysztof Kozlowski 
Cc: Kukjin Kim 
Cc: Jonathan Cameron 
Cc: Thierry Reding 
Cc: Chen-Yu Tsai 
Cc: Maxime Ripard 
Cc: Alexandre Torgue 
Cc: Maxime Coquelin 
Signed-off-by: Rob Herring

dt-bindings: simple-framebuffer: Add requirement for pipelines

2019-07-03T19:18:50+00:00

Both the allwinner and amlogic compatibles require that either the
allwinner,pipeline or the amlogic,pipeline property is set. This was
dropped during the conversion since we didn't have conditionals back then,
but we can express this properly now.

Signed-off-by: Maxime Ripard 
Signed-off-by: Rob Herring