linux.git/Documentation/devicetree/bindings/devfreq, branch v5.1

dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.

2018-07-18T04:58:37+00:00

In ATF we already wait for DDR DVFS finish, so move the interrupts properties
to be optional.

Signed-off-by: Enric Balletbo i Serra 
Reviewed-by: Chanwoo Choi 
Reviewed-by: Rob Herring 
Signed-off-by: MyungJoo Ham

dt-bindings: clock: add rk3399 DDR3 standard speed bins.

2018-07-18T04:58:30+00:00

DDR3 SDRAM Standard (JESD79-3F) defines some standard speed bins for
DDR3 memories. The rk3399_dmc driver allows you to pass these values via
the device tree. For that purpose the devfreq/rk3399_dmc.txt binding
refers to a ddr.h file which does not exist. This patch adds the missing
defines in a include file called rk3399-ddr.h with the definition of
standard speed bins according to the ARM Trusted Firmware (ATF).

Fixes: c1ceb8f7c167 (Documentation: bindings: add dt documentation for rk3399 dmc)
Signed-off-by: Enric Balletbo i Serra 
Reviewed-by: Rob Herring 
Signed-off-by: MyungJoo Ham

dt-bindings: devfreq: rk3399_dmc: improve binding documentation.

2018-07-18T04:56:52+00:00

There are several typos, references to non existent files, grammar and
punctuation mistakes in the rk3399_dmc.txt binding. This patch tries
to improve the binding documentation and fix these mistakes.

Signed-off-by: Nick Milner 
Signed-off-by: Enric Balletbo i Serra 
Reviewed-by: Rob Herring 
- [1/5] Fix some attributes to match with the code s/_disb/_dis/
Signed-off-by: MyungJoo Ham

docs: Fix more broken references

2018-06-15T21:11:26+00:00

As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.

Acked-by: Matthias Brugger 
Acked-by: Takashi Iwai 
Acked-by: Jeff Kirsher 
Acked-by: Guenter Roeck 
Acked-by: Miguel Ojeda 
Signed-off-by: Mauro Carvalho Chehab 
Acked-by: Jonathan Corbet

dt-bindings: Use lower case hex in unit-addresses

2017-12-26T16:37:05+00:00

DT unit addresses should be lower case hex. Fix all the
binding examples.

Converted with the following command from Krzysztof Kozlowski:

sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')

Signed-off-by: Rob Herring

dt-bindings: Remove leading 0x from bindings notation

2017-12-06T20:56:33+00:00

Improve the binding example by removing all the leading 0x to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

Converted using the following command:

find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} +

This is a follow up to commit 48c926cd3414

Signed-off-by: Mathieu Malaterre 
Signed-off-by: Rob Herring

dt-bindings: Remove "status" from examples

2017-09-05T15:03:06+00:00

Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland 
Signed-off-by: Rob Herring

ARM: dts: exynos: Use - instead of @ for DT OPP entries

2017-04-20T16:06:03+00:00

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski 
Reported-by: Masahiro Yamada 
Suggested-by: Mark Rutland 
Signed-off-by: Viresh Kumar 
Reviewed-by: Chanwoo Choi 
Reviewed-by: Krzysztof Kozlowski 
Acked-by: Rob Herring 
[k.kozlowski: Split patch per ARM and ARM64]
Signed-off-by: Krzysztof Kozlowski

PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433

2017-01-31T05:12:18+00:00

This patch adds the detailed corrleation between sub-blocks and VDD_INT power
line for Exynos5433. VDD_INT provided the power source to INT (Internal) block.

Signed-off-by: Chanwoo Choi 
Signed-off-by: MyungJoo Ham

Documentation: bindings: add dt documentation for rk3399 dmc

2016-09-06T04:25:36+00:00

This patch adds the documentation for rockchip rk3399 dmc driver.

Signed-off-by: Lin Huang 
Reviewed-by: Chanwoo Choi 
Signed-off-by: MyungJoo Ham