Pull crypto updates from Herbert Xu: "API: - Add linear akcipher/sig API - Add tfm cloning (hmac, cmac) - Add statesize to crypto_ahash Algorithms: - Allow only odd e and restrict value in FIPS mode for RSA - Replace LFSR with SHA3-256 in jitter - Add interface for gathering of raw entropy in jitter Drivers: - Fix race on data_avail and actual data in hwrng/virtio - Add hash and HMAC support in starfive - Add RSA algo support in starfive - Add support for PCI device 0x156E in ccp" * tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits) crypto: akcipher - Do not copy dst if it is NULL crypto: sig - Fix verify call crypto: akcipher - Set request tfm on sync path crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS hwrng: st - keep clock enabled while hwrng is registered hwrng: st - support compile-testing hwrng: imx-rngc - fix the timeout for init and self check KEYS: asymmetric: Use new crypto interface without scatterlists KEYS: asymmetric: Move sm2 code into x509_public_key KEYS: Add forward declaration in asymmetric-parser.h crypto: sig - Add interface for sign/verify crypto: akcipher - Add sync interface without SG lists crypto: cipher - On clone do crypto_mod_get() crypto: api - Add __crypto_alloc_tfmgfp crypto: api - Remove crypto_init_ops() crypto: rsa - allow only odd e and restrict value in FIPS mode crypto: geniv - Split geniv out of AEAD Kconfig option crypto: algboss - Add missing dependency on RNG2 crypto: starfive - Add RSA algo support ...
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The biggest change this time is for the 32-bit devicetree files, which
are all moved to a new location, using separate subdirectories for
each SoC vendor, following the same scheme that is used on arm64, mips
and riscv. This has been discussed for many years, but so far we never
did this as there was a plan to move the files out of the kernel
entirely, which has never happened.
The impact of this will be that all external patches no longer apply,
and anything depending on the location of the dtb files in the build
directory will have to change. The installed files after 'make
dtbs_install' keep the current location.
There are six added SoCs here that are largely variants of previously
added chips. Two other chips are added in a separate branch along with
their device drivers.
- The Samsung Exynos 4212 makes its return after the Samsung Galaxy
Express phone is addded at last. The SoC support was originally
added in 2012 but removed again in 2017 as it was unused at the
time.
- Amlogic C3 is a Cortex-A35 based smart IP camera chip
- Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
the still common MSM8916 (Snapdragon 410) phone chip that has been
supported for a long time.
- Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
laptop chips, used in the Lenovo Flex 5G, which is added along with
the reference board.
- Qualcomm SDX75 is the latest generation modem chip that is used as
a peripherial in phones but can also run a standalone Linux. Unlike
the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.
- Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
Xuantie C910 core, a step up from all previously added rv64 chips.
All of the above come with reference board implementations, those
included there are 39 new board files, but only five more 32-bit this
time, probably a new low:
- Marantec Maveo board based on dhcor imx6ull module
- Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip
- Epson Moverio BT-200 AR glasses based on TI OMAP4
- PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM
- ICnova ADB4006 board based on Allwinner A20
On the 64-bit side, there are also fewer addded machines than we had
in the recent releases:
- Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.
- NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234
- Qualcomm gains support for 6 reference boards on various members of
their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
of the various reference platforms for their new chips.
- Rockchips support for several newer boards: Indiedroid Nova
(rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
Fastrhino R66S/R68S (rk3568)
- TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
Verdin family with AM62 COM, carrier and dev boards
Other changes to existing boards contain the usual minor improvements
along with
- continued updates to clean up dts files based on dtc warnings and
binding checks, in particular cache properties and node names
- support for devicetree overlays on at91, bcm283x
- significant additions to existing SoC support on mediatek,
qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
STM32MP1
As usual, a lot more detail is available in the individual merge
commits"
* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
ARM: mvebu: fix unit address on armada-390-db flash
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
ARM: dts: lan966x: kontron-d10: add PHY interrupts
ARM: dts: lan966x: kontron-d10: fix SPI CS
ARM: dts: lan966x: kontron-d10: fix board reset
ARM: dts: at91: Enable device-tree overlay support for AT91 boards
arm: dts: Enable device-tree overlay support for AT91 boards
arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
ARM: dts: at91: use generic name for shutdown controller
ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
dt-bindings: firmware: brcm,kona-smc: convert to YAML
riscv: dts: sort makefile entries by directory
riscv: defconfig: enable T-HEAD SoC
MAINTAINERS: add entry for T-HEAD RISC-V SoC
riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
riscv: dts: add initial T-HEAD TH1520 SoC device tree
riscv: Add the T-HEAD SoC family Kconfig option
...
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230621064403.9221-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
The "linux,keycode" property is non-standard. Add the common property "linux,keycodes" and mark "linux,keycode" deprecated so that the mistake is not propagated. Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230613201231.2826352-2-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
The "linux,keycode" property is missing a type probably because it was confused with the common property "linux,keycodes". Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230613201231.2826352-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
Currently the dtbs_check for imx6 generates warnings like this: 'fsl,imx6sl-dcp' is not one of ['fsl,imx23-dcp', 'fsl,imx28-dcp'] ['fsl,imx6sl-dcp', 'fsl,imx28-dcp'] is too long or 'fsl,imx6ull-dcp' is not one of ['fsl,imx23-dcp', 'fsl,imx28-dcp'] ['fsl,imx6ull-dcp', 'fsl,imx28-dcp'] is too long So add them to the devicetree binding. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230530100843.15072-2-stefan.wahren@i2se.com Signed-off-by: Rob Herring <robh@kernel.org>
@xilinx.com is still working but better to switch to new amd.com after AMD/Xilinx acquisition. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f5b2bd1e78407e4128fc8f0b5874ba723e710a88.1684245058.git.michal.simek@amd.com
The core clock for the Crypto Engine block on Qualcomm SoCs SM6115 and QCM2290 are provided via the RPM block. So mark the compatibles for these SoCs to indicate that only 'core' clock is required for such SoCs. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the compatible list available in 'qce' dt-bindings does not
support SM8150 and IPQ4019 SoCs directly which may lead to potential
'dtbs_check' error(s).
Fix the same.
Fixes: 00f3bc2db351 ("dt-bindings: qcom-qce: Add new SoC compatible strings for Qualcomm QCE IP")
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add documentation to describe StarFive cryptographic engine. Co-developed-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>