Pull devicetree updates from Rob Herring:

 - Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere

 - Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml

 - Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
   schemas

 - Drop PicoXcell bindings

 - Drop unused and undocumented 'pnx,timeout' property from LPC32xx

 - Add 'dynamic-power-coefficient' to Mali GPU bindings

 - Make 'make dt_binding_check' not error out on warnings

 - Various minor binding fixes

* tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
  dt-bindings: mali-bifrost: Add dynamic-power-coefficient
  dt-bindings: mali-midgard: Add dynamic-power-coefficient
  dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"
  dt-bindings: Remove PicoXcell bindings
  ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout'
  dt-bindings: mtd: convert "fixed-partitions" to the json-schema
  dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes
  dt-bindings: pci: rcar-pci-ep: Document missing interrupts property
  dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com
  dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH
  dt-bindings: mfd: fix stm32 timers example
  dt-bindings: trivial-devices: Add delta,q54sj108a2
  dt-bindings:i2c:i2c-gate: txt to yaml conversion
  dt-bindings: add ADP5585/ADP5589 entries to trivial-devices
  dt-bindings: Correct GV11B GPU register sizes
  dt-bindings: vendor-prefixes: Add FII
  dt-bindings: Fix typo on the DesignWare IP reset bindings documentation
  dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES
  dt-bindings: arm: vt8500: remove redundant white-spaces
  dt-bindings: fsl-imx-drm: fix example compatible string
  ...

PicoXcell has had nothing but treewide cleanups for at least the last 8
years and no signs of activity. The most recent activity is a yocto vendor
kernel based on v3.0 in 2015.

Cc: linux-crypto@vger.kernel.org
Acked-by: Jamie Iles <jamie@jamieiles.com>
Link: https://lore.kernel.org/r/20201210200315.2965567-5-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Add device-tree bindings for Intel Keem Bay Offload and Crypto Subsystem
(OCS) AES crypto driver.

Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Acked-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull ARM Devicetree updates from Olof Johansson:
 "As usual, most of the changes are to devicetrees.

  Besides smaller fixes, some refactorings and cleanups, some of the new
  platforms and chips (or significant features) supported are below:

  Broadcom boards:
   - Cisco Meraki MR32 (BCM53016-based)
   - BCM2711 (RPi4) display pipeline support

  Actions Semi boards:
   - Caninos Loucos Labrador SBC (S500-based)
   - RoseapplePi SBC (S500-based)

  Allwinner SoCs/boards:
   - A100 SoC with Perf1 board
   - Mali, DMA, Cetrus and IR support for R40 SoC

  Amlogic boards:
   - Libretch S905x CC V2 board
   - Hardkernel ODROID-N2+ board

  Aspeed boards/platforms:
   - Wistron Mowgli (AST2500-based, Power9 OpenPower server)
   - Facebook Wedge400 (AST2500-based, ToR switch)

  Hisilicon SoC:
   - SD5203 SoC

  Nvidia boards:
   - Tegra234 VDK, for pre-silicon Orin SoC

  NXP i.MX boards:
   - Librem 5 phone
   - i.MX8MM DDR4 EVK
   - Variscite VAR-SOM-MX8MN SoM
   - Symphony board
   - Tolino Shine 2 HD
   - TQMa6 SoM
   - Y Soft IOTA Orion

  Rockchip boards:
   - NanoPi R2S board
   - A95X-Z2 board
   - more Rock-Pi4 variants

  STM32 boards:
   - Odyssey SOM board (STM32MP157CAC-based)
   - DH DRC02 board

  Toshiba SoCs/boards:
   - Visconti SoC and TPMV7708 board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
  ARM: dts: nspire: Fix SP804 users
  arm64: dts: lg: Fix SP804 users
  arm64: dts: lg: Fix SP805 clocks
  ARM: mstar: Fix up the fallout from moving the dts/dtsi files
  ARM: mstar: Add mstar prefix to all of the dtsi/dts files
  ARM: mstar: Add interrupt to pm_uart
  ARM: mstar: Add interrupt controller to base dtsi
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  ARM: dts: hisilicon: add SD5203 dts
  ARM: dts: hisilicon: fix the system controller compatible nodes
  arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
  arm64: dts: zynqmp: Remove undocumented u-boot properties
  arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
  arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
  ...

Allwinner V3s has crypto engine similar to that in A33.
So add compatible.

Signed-off-by: Martin Cerveny <m.cerveny@computer.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200907162458.23730-2-m.cerveny@computer.org

When adding allwinner,sun8i-a33-crypto, I forgot to add that it needs reset.
Furthermore, there are no need to use items to list only one compatible
in compatible list.

Fixes: f81547ba7a98 ("dt-bindings: crypto: add new compatible for A33 SS")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200907175437.4464-1-clabbe.montjoie@gmail.com

Correct a typo in the compatible - missing trailing 's'.

Reviewed-by: Kamil Konieczny <k.konieczny@samsung.com>
Acked-by: Kamil Konieczny <k.konieczny@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200903180400.2865-1-krzk@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

DT binding check produces a warning about bad cell size:

Documentation/devicetree/bindings/crypto/ti,sa2ul.example.dt.yaml: example-0: crypto@4e00000:reg:0: [0, 81788928, 0, 4608] is too long
	From schema: python3.6/site-packages/dtschema/schemas/reg.yaml

Fix this by reducing the address sizes for the example to 1 cell from
current 2.

Fixes: 2ce9a7299bf6 ("dt-bindings: crypto: Add TI SA2UL crypto accelerator documentation")
Reported-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200825133106.21542-2-t-kristo@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX sahara binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/1596595410-26921-3-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>