There should not be a comma in the address used for the instance
so drop them.

This is a left over from a review of the final version before
Herbert Xu picked the series up.

Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 8f026dc887fe ("dt-bindings: Add bidnings for Hisilicon SEC crypto accelerators")
Signed-off-by: Rob Herring <robh@kernel.org>

Pull crypto updates from Herbert Xu:
 "API:
   - Fix dcache flushing crash in skcipher.
   - Add hash finup self-tests.
   - Reschedule during speed tests.

  Algorithms:
   - Remove insecure vmac and replace it with vmac64.
   - Add public key verification for DH/ECDH.

  Drivers:
   - Decrease priority of sha-mb on x86.
   - Improve NEON latency/throughput on ARM64.
   - Add md5/sha384/sha512/des/3des to inside-secure.
   - Support eip197d in inside-secure.
   - Only register algorithms supported by the host in virtio.
   - Add cts and remove incompatible cts1 from ccree.
   - Add hisilicon SEC security accelerator driver.
   - Replace msm hwrng driver with qcom pseudo rng driver.

  Misc:
   - Centralize CRC polynomials"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (121 commits)
  crypto: arm64/ghash-ce - implement 4-way aggregation
  crypto: arm64/ghash-ce - replace NEON yield check with block limit
  crypto: hisilicon - sec_send_request() can be static
  lib/mpi: remove redundant variable esign
  crypto: arm64/aes-ce-gcm - don't reload key schedule if avoidable
  crypto: arm64/aes-ce-gcm - implement 2-way aggregation
  crypto: arm64/aes-ce-gcm - operate on two input blocks at a time
  crypto: dh - make crypto_dh_encode_key() make robust
  crypto: dh - fix calculating encoded key size
  crypto: ccp - Check for NULL PSP pointer at module unload
  crypto: arm/chacha20 - always use vrev for 16-bit rotates
  crypto: ccree - allow bigger than sector XTS op
  crypto: ccree - zero all of request ctx before use
  crypto: ccree - remove cipher ivgen left overs
  crypto: ccree - drop useless type flag during reg
  crypto: ablkcipher - fix crash flushing dcache in error path
  crypto: blkcipher - fix crash flushing dcache in error path
  crypto: skcipher - fix crash flushing dcache in error path
  crypto: skcipher - remove unnecessary setting of walk->nbytes
  crypto: scatterwalk - remove scatterwalk_samebuf()
  ...

The hip06 and hip07 SoCs contain a number of these crypto units which
accelerate AES and DES operations.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Later qcom chips support v2 of the prng, which exposes an EE
(Execution Environment) for OS to use so add new compatible
qcom,prng-ee for this.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that we are adding new driver for prng in crypto, move the
binding as well.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

'interrupt-parent' is often documented as part of define bindings, but
it is really outside the scope of a device binding. It's never required
in a given node as it is often inherited from a parent node. Or it can
be implicit if a parent node is an 'interrupt-controller' node. So
remove it from all the binding files.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

This patch documents the new compatible used for the eip197d engine, as
this new engine is now supported by the Inside Secure SafeXcel
cryptographic driver.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The compatibles were updated in the Inside Secure SafeXcel cryptographic
driver, as the ones previously used were not specific enough. The old
compatibles are still supported by the driver for backward
compatibility.

This patch updates the documentation accordingly.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Bindings are supposed to be organized by device class/function. Move
bindings for various RNGs to rng/ binding directory.

Signed-off-by: Rob Herring <robh@kernel.org>

Pull ARM SoC device tree updates from Arnd Bergmann:
 "This is the usual set of changes for device trees, with over 700
  non-merged changesets. There is an ongoing set of dtc warning fixes
  and the usual bugfixes, cleanups and added device support.

  The most interesting bit as usual is support for new machines listed
  below:

   - The Allwinner H6 makes its debut with the Pine-H64 board, and we
     get two new machines based on its older siblings: the H5 based
     OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the
     32-bit side, we add The Olimex som204 based on Allwinner A20, and
     the Banana Pi M2 Zero development board (based on H2).

   - NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
     development board and p2888 CPU module.

   - The Nuvoton npcm750 is a BMC that was newly added, for now we only
     support running on the evaluation board.

   - STmicroelectronics stm32 gains support for the stm32mp157c and two
     evaluation boards.

   - The Toradex Colibri board family grows a few members based on the
     i.MX6ULL variant.

   - The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family
     of chips.

   - The Phytec phyBOARD Mira is a family of industrial boards based on
     i.MX6. For now, four models get added.

   - TI am335x based PDU-001 is an industrial embedded machine used for
     traffic monitoring

   - The Aspeed platform now supports running on the BMC on the Qualcomm
     Centriq 2400 server

   - Samsung Exynos4 based Galaxy S3 is a family of mobile phones
     Qualcomm msm8974 based Galaxy S5 is a rather different phone made
     by the same company.

   - The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
     for the various boards made by Xilinx themselves, as well as the
     Digilent Zybo Z7.

   - The ARM Versatile family now supports the "IB2" interface board.

   - The Renesas H2 based "Stout" and the H3 based Salvator-X are more
     evaluation boards named after a kind of beer, as most of them are.
     The r8a77980 (V3H) based "Condor" apparently doesn't follow that
     tradition. ;-)

   - ROC-RK3328-CC is a simple developement board from the Libre
     Computer Project, based on the Rockchips RK3328 SoC

   - Haiku is another development board plus Qseven module based on
     Rockchips RK3368 and made by Theobroma Systems"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits)
  arm: dts: modify Nuvoton NPCM7xx device tree structure
  arm: dts: modify Makefile NPCM750 configuration name
  arm: dts: modify clock binding in NPCM750 device tree
  arm: dts: modify timer register size in NPCM750 device tree
  arm: dts: modify UART compatible name in NPCM750 device tree
  arm: dts: add watchdog device to NPCM750 device tree
  arm64: dts: uniphier: add ethernet node for PXs3
  ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
  arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
  arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
  arm: dts: armada-385-db-ap: use SPDX-License-Identifier
  arm: dts: armada-388-rd: use SPDX-License-Identifier
  arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
  arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
  arm: dts: armada-370-db: use SPDX-License-Identifier
  arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
  arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
  arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
  ...