linux.git/Documentation/devicetree/bindings/clock, branch v6.3 Linux kernel source tree Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2023-02-25T23:16:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-25T23:16:23+00:00 1ec35eadc3b448c91a6b763371a7073444e95f9d Pull clk updates from Stephen Boyd: "We have one small patch to the clk core this time around. It fixes a corner case with the CLK_OPS_PARENT_ENABLE flag combined with clk_core_is_enabled() where it hangs the system. We'll simply assume the clk is disabled if the parent is disabled and the flag is set. Trying to turn on the parent to check the enable state of the clk runs into system hangs at boot. We let this bake in -next for a couple weeks to make sure there aren't any more issues because the last attempt to fix this ran into hangs and had to be reverted. Note: There were some more patches to the core framework around sync_state and disabling unused clks, but I asked for that to be reverted from the qcom PR because it isn't ready and we're still discussing the best solution on the list. Outside of the core clk framework, we have the usual collection of clk driver updates and support for new SoCs (which seems to never stop). The dirstat is dominated by Qualcomm because they added support for quite a few SoCs this time around and also migrated quite a few of their drivers to clk_parent_data. The other big diff is in the Mediatek clk drivers that saw a significant rework this cycle to similarly modernize the code, and we'll see that work continue in the next cycle as well. Nothing really jumps out as scary here, except that the significant churn in parent data descriptions can have typos that go unnoticed. More details below. Core: - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() New Drivers: - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET ref clocks - Support for Mediatek MT7891 SoC clks - Support for many Qualcomm clk controllers: - QDU1000/QRU1000 global clock controller - SA8775P global clock controller - SM8550 TCSR and display clock controller - SM6350 clock controller - MSM8996 CBF and APCS clock controllers Updates: - Various cleanups and improvements to Mediatek clk drivers to reduce code size and modernize the drivers - Support for Versa 5P49V60 clks - Disable R-Car H3 ES1.*, as it was only available to an internal development group and needed a lot of quirks and workarounds - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and resets on Renesas RZ/V2M - Add display clocks on Renesas R-Car V4H - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L - Free the imx_uart_clocks even if imx_register_uart_clocks returns early - Get the stdout clocks count from device tree on i.MX - Drop the clock count argument from imx_register_uart_clocks() - Keep the uart clocks on i.MX93 for when earlycon is used - Fix SPDX comment in i.MX6SLL clocks bindings header - Drop some unnecessary spaces from i.MX8ULP clocks bindings header - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is not configured via devicetree - Fix the ENET1 gate configuration for i.MX6UL according to the reference manual - Add ENET refclock mux support for i.MX6UL - Add support for USB host/device configuration on Renesas RZ/N1 - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car V4H - Add D1 CAN bus gates and resets for Allwinner - Mark D1 CPUX clock as critical on Allwinner - Reuse D1 driver for Allwinner R528/T113 - Cleanup sunxi-ng Kconfig - Fix sunxi-ng kernel-doc issues - Model Allwinner H3/H5 DRAM clock as fixed clock - Use .determine_rate() instead of .round_rate() for the dualdiv, mpll, sclk-div and cpu-dyn-div amlogic clock drivers - DDR clocks were marked as critical in the proper clock driver for each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted in the next releases as it only does clock enablement - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some of them may use it - Support synchronous power_off requests in the qcom GDSC driver for proper GPU power collapse - Drop test clocks from various Qualcomm clk drivers - Update parent references to use clk_parent_data/clk_hw in various Qualcomm clk drivers - Fixes for the Qualcomm MSM8996 CPU clock controller - Transition Qualcomm MSM8974 GCC off the externally defined sleep_clk - Add GDSCs in the global clock controller for Qualcomm QCS404 - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and SDM845 are moved to use the recently introduced properties in the GDSC struct - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock is added on a variety of platforms - De-duplicate identical clks in Qualcomm SMD RPM clk driver - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404 to Qualcomm SDM RPM clk driver - Various Qualcomm clk drivers use devm_pm_runtime_enable() to simplify" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused clk: imx: pll14xx: fix recalc_rate for negative kdiv clk: rs9: Drop unused pin_xin field MAINTAINERS: clk: imx: Add Peng Fan as reviewer clk: sprd: Add dependency for SPRD_UMS512_CLK clk: ralink: fix 'mt7621_gate_is_enabled()' function clk: mediatek: clk-mtk: Remove unneeded semicolon dt-bindings: clock: remove stih416 bindings dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file clk: imx: fix compile testing imxrt1050 clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static clk: renesas: rcar-gen3: Disable R-Car H3 ES1.* dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include ... 
Pull clk updates from Stephen Boyd:
 "We have one small patch to the clk core this time around. It fixes a
  corner case with the CLK_OPS_PARENT_ENABLE flag combined with
  clk_core_is_enabled() where it hangs the system. We'll simply assume
  the clk is disabled if the parent is disabled and the flag is set.
  Trying to turn on the parent to check the enable state of the clk runs
  into system hangs at boot. We let this bake in -next for a couple
  weeks to make sure there aren't any more issues because the last
  attempt to fix this ran into hangs and had to be reverted.

  Note: There were some more patches to the core framework around
  sync_state and disabling unused clks, but I asked for that to be
  reverted from the qcom PR because it isn't ready and we're still
  discussing the best solution on the list.

  Outside of the core clk framework, we have the usual collection of clk
  driver updates and support for new SoCs (which seems to never stop).
  The dirstat is dominated by Qualcomm because they added support for
  quite a few SoCs this time around and also migrated quite a few of
  their drivers to clk_parent_data. The other big diff is in the
  Mediatek clk drivers that saw a significant rework this cycle to
  similarly modernize the code, and we'll see that work continue in the
  next cycle as well. Nothing really jumps out as scary here, except
  that the significant churn in parent data descriptions can have typos
  that go unnoticed. More details below.

  Core:
   - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()

  New Drivers:
   - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
     ref clocks
   - Support for Mediatek MT7891 SoC clks
   - Support for many Qualcomm clk controllers:
      - QDU1000/QRU1000 global clock controller
      - SA8775P global clock controller
      - SM8550 TCSR and display clock controller
      - SM6350 clock controller
      - MSM8996 CBF and APCS clock controllers

  Updates:
   - Various cleanups and improvements to Mediatek clk drivers to reduce
     code size and modernize the drivers
   - Support for Versa 5P49V60 clks
   - Disable R-Car H3 ES1.*, as it was only available to an internal
     development group and needed a lot of quirks and workarounds
   - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
     resets on Renesas RZ/V2M
   - Add display clocks on Renesas R-Car V4H
   - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
   - Free the imx_uart_clocks even if imx_register_uart_clocks returns
     early
   - Get the stdout clocks count from device tree on i.MX
   - Drop the clock count argument from imx_register_uart_clocks()
   - Keep the uart clocks on i.MX93 for when earlycon is used
   - Fix SPDX comment in i.MX6SLL clocks bindings header
   - Drop some unnecessary spaces from i.MX8ULP clocks bindings header
   - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
     not configured via devicetree
   - Fix the ENET1 gate configuration for i.MX6UL according to the
     reference manual
   - Add ENET refclock mux support for i.MX6UL
   - Add support for USB host/device configuration on Renesas RZ/N1
   - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
     V4H
   - Add D1 CAN bus gates and resets for Allwinner
   - Mark D1 CPUX clock as critical on Allwinner
   - Reuse D1 driver for Allwinner R528/T113
   - Cleanup sunxi-ng Kconfig
   - Fix sunxi-ng kernel-doc issues
   - Model Allwinner H3/H5 DRAM clock as fixed clock
   - Use .determine_rate() instead of .round_rate() for the dualdiv,
     mpll, sclk-div and cpu-dyn-div amlogic clock drivers
   - DDR clocks were marked as critical in the proper clock driver for
     each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
     in the next releases as it only does clock enablement
   - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
     of them may use it
   - Support synchronous power_off requests in the qcom GDSC driver for
     proper GPU power collapse
   - Drop test clocks from various Qualcomm clk drivers
   - Update parent references to use clk_parent_data/clk_hw in various
     Qualcomm clk drivers
   - Fixes for the Qualcomm MSM8996 CPU clock controller
   - Transition Qualcomm MSM8974 GCC off the externally defined
     sleep_clk
   - Add GDSCs in the global clock controller for Qualcomm QCS404
   - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
   - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
     SDM845 are moved to use the recently introduced properties in the
     GDSC struct
   - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
     the IPA clock is added on a variety of platforms
   - De-duplicate identical clks in Qualcomm SMD RPM clk driver
   - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
     to Qualcomm SDM RPM clk driver
   - Various Qualcomm clk drivers use devm_pm_runtime_enable() to
     simplify"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
  clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
  clk: qcom: Revert sync_state based clk_disable_unused
  clk: imx: pll14xx: fix recalc_rate for negative kdiv
  clk: rs9: Drop unused pin_xin field
  MAINTAINERS: clk: imx: Add Peng Fan as reviewer
  clk: sprd: Add dependency for SPRD_UMS512_CLK
  clk: ralink: fix 'mt7621_gate_is_enabled()' function
  clk: mediatek: clk-mtk: Remove unneeded semicolon
  dt-bindings: clock: remove stih416 bindings
  dt-bindings: clock: add loongson-2 clock
  dt-bindings: clock: add loongson-2 clock include file
  clk: imx: fix compile testing imxrt1050
  clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
  clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
  clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
  dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
  clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
  clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
  dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
  clk: qcom: cpu-8996: add missing cputype include
  ...
Merge tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2023-02-24T21:31:53+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-24T21:31:53+00:00 8395d932d24a9b4c01ab33ed0b4b2de06328afc2 Pull devicetree updates from Rob Herring: "DT core: - Add node lifecycle unit tests - Add of_property_present() helper aligned with fwnode API - Print more information on reserved regions on boot - Update dtc to upstream v1.6.1-66-gabbd523bae6e - Use strscpy() to instead of strncpy() in DT core - Add option for schema validation on %.dtb targets Bindings: - Add/fix support for listing multiple patterns in DT_SCHEMA_FILES - Rework external memory controller/bus bindings to properly support controller specific child node properties - Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT schema format - Add RiscV SBI PMU event mapping binding - Add missing contraints on Arm SCMI child node allowed properties - Add a bunch of missing Socionext UniPhier glue block bindings and example fixes - Various fixes for duplicate or conflicting type definitions on DT properties" * tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits) dt-bindings: regulator: Add mps,mpq7932 power-management IC of: dynamic: Fix spelling mistake "kojbect" -> "kobject" dt-bindings: drop Sagar Kadam from SiFive binding maintainership dt-bindings: sram: qcom,imem: document sm8450 dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema dt-bindings: arm: Add Cortex-A715 and X3 of: dynamic: add lifecycle docbook info to node creation functions of: add consistency check to of_node_release() of: do not use "%pOF" printk format on node with refcount of zero of: unittest: add node lifecycle tests of: update kconfig unittest help of: add processing of EXPECT_NOT to of_unittest_expect of: prepare to add processing of EXPECT_NOT to of_unittest_expect of: Use preferred of_property_read_* functions of: Use of_property_present() helper of: Add of_property_present() helper of: reserved_mem: Use proper binary prefix dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES of: reserved-mem: print out reserved-mem details during boot dt-bindings: serial: restrict possible child node names ... 
Pull devicetree updates from Rob Herring:
 "DT core:

   - Add node lifecycle unit tests

   - Add of_property_present() helper aligned with fwnode API

   - Print more information on reserved regions on boot

   - Update dtc to upstream v1.6.1-66-gabbd523bae6e

   - Use strscpy() to instead of strncpy() in DT core

   - Add option for schema validation on %.dtb targets

  Bindings:

   - Add/fix support for listing multiple patterns in DT_SCHEMA_FILES

   - Rework external memory controller/bus bindings to properly support
     controller specific child node properties

   - Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
     RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
     schema format

   - Add RiscV SBI PMU event mapping binding

   - Add missing contraints on Arm SCMI child node allowed properties

   - Add a bunch of missing Socionext UniPhier glue block bindings and
     example fixes

   - Various fixes for duplicate or conflicting type definitions on DT
     properties"

* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
  dt-bindings: regulator: Add mps,mpq7932 power-management IC
  of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
  dt-bindings: drop Sagar Kadam from SiFive binding maintainership
  dt-bindings: sram: qcom,imem: document sm8450
  dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
  dt-bindings: arm: Add Cortex-A715 and X3
  of: dynamic: add lifecycle docbook info to node creation functions
  of: add consistency check to of_node_release()
  of: do not use "%pOF" printk format on node with refcount of zero
  of: unittest: add node lifecycle tests
  of: update kconfig unittest help
  of: add processing of EXPECT_NOT to of_unittest_expect
  of: prepare to add processing of EXPECT_NOT to of_unittest_expect
  of: Use preferred of_property_read_* functions
  of: Use of_property_present() helper
  of: Add of_property_present() helper
  of: reserved_mem: Use proper binary prefix
  dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
  of: reserved-mem: print out reserved-mem details during boot
  dt-bindings: serial: restrict possible child node names
  ...
Merge branches 'clk-loongson' and 'clk-qcom' into clk-next 2023-02-23T19:04:25+00:00 Stephen Boyd sboyd@kernel.org 2023-02-23T19:04:25+00:00 b64baafa24d2c430513329daf5ebb821620d0c03 * clk-loongson: dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file * clk-qcom: (143 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include clk: qcom: gcc-sa8775p: remove unused variables clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform clk: qcom: add msm8996 Core Bus Framework (CBF) support dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller clk: qcom: add the driver for the MSM8996 APCS clocks clk: qcom: gcc-qcs404: fix duplicate initializer warning clk: qcom: cpu-8996: change setup sequence to follow vendor kernel clk: qcom: cpu-8996: fix PLL clock ops clk: qcom: cpu-8996: fix ACD initialization clk: qcom: cpu-8996: fix PLL configuration sequence clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call clk: qcom: cpu-8996: setup PLLs before registering clocks clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb ... 
* clk-loongson:
  dt-bindings: clock: add loongson-2 clock
  dt-bindings: clock: add loongson-2 clock include file

* clk-qcom: (143 commits)
  clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
  clk: qcom: Revert sync_state based clk_disable_unused
  dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
  clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
  clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
  dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
  clk: qcom: cpu-8996: add missing cputype include
  clk: qcom: gcc-sa8775p: remove unused variables
  clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform
  clk: qcom: add msm8996 Core Bus Framework (CBF) support
  dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller
  clk: qcom: add the driver for the MSM8996 APCS clocks
  clk: qcom: gcc-qcs404: fix duplicate initializer warning
  clk: qcom: cpu-8996: change setup sequence to follow vendor kernel
  clk: qcom: cpu-8996: fix PLL clock ops
  clk: qcom: cpu-8996: fix ACD initialization
  clk: qcom: cpu-8996: fix PLL configuration sequence
  clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call
  clk: qcom: cpu-8996: setup PLLs before registering clocks
  clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb
  ...
Merge branches 'clk-microchip', 'clk-allwinner', 'clk-mediatek', 'clk-imx' and 'clk-core' into clk-next 2023-02-23T19:04:12+00:00 Stephen Boyd sboyd@kernel.org 2023-02-23T19:04:12+00:00 60950df7b4a8a5fa18be936bdac4edab23fef4bc - Various cleanups and improvements to Mediatek clk drivers to reduce code size and modernize the drivers - Support for Mediatek MT7891 SoC clks * clk-microchip: clk: at91: do not compile dt-compat.c for sama7g5 and sam9x60 clk: at91: mark ddr clocks as critical * clk-allwinner: clk: sunxi-ng: d1: Add CAN bus gates and resets dt-bindings: clock: Add D1 CAN bus gates and resets clk: sunxi-ng: d1: Mark cpux clock as critical clk: sunxi-ng: d1: Allow building for R528/T113 clk: sunxi-ng: Move SoC driver conditions to dependencies clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies clk: sunxi-ng: Avoid computing the rate twice clk: sunxi-ng: h3/h5: Model H3 CLK_DRAM as a fixed clock clk: sunxi-ng: fix ccu_mmc_timing.c kernel-doc issues * clk-mediatek: (29 commits) clk: mediatek: clk-mtk: Remove unneeded semicolon clk: mediatek: remove MT8195 vppsys/0/1 simple_probe dt-bindings: arm: mediatek: migrate MT8195 vppsys0/1 to mtk-mmsys driver clk: mediatek: add MT7981 clock support dt-bindings: clock: mediatek: add mt7981 clock IDs dt-bindings: clock: Add compatibles for MT7981 clk: mediatek: clk-mt7986-topckgen: Migrate to mtk_clk_simple_probe() clk: mediatek: clk-mt7986-topckgen: Properly keep some clocks enabled clk: mediatek: clk-mt6795-topckgen: Migrate to mtk_clk_simple_probe() clk: mediatek: clk-mt8186-topckgen: Migrate to mtk_clk_simple_probe() clk: mediatek: clk-mt8192: Migrate topckgen to mtk_clk_simple_probe() clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe() clk: mediatek: clk-mt8183: Join top_aud_muxes and top_aud_divs clk: mediatek: mt8186: Join top_adj_div and top_muxes clk: mediatek: mt8192: Join top_adj_divs and top_muxes clk: mediatek: clk-mt8192: Move CLK_TOP_CSW_F26M_D2 in top_divs clk: mediatek: mt8173: Migrate pericfg/topckgen to mtk_clk_simple_probe() clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe() clk: mediatek: Switch to mtk_clk_simple_probe() where possible clk: mediatek: mt8173: Break down clock drivers and allow module build ... * clk-imx: clk: imx: pll14xx: fix recalc_rate for negative kdiv MAINTAINERS: clk: imx: Add Peng Fan as reviewer clk: imx: fix compile testing imxrt1050 clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static clk: imx6ul: add ethernet refclock mux support clk: imx6ul: fix enet1 gate configuration clk: imx: add imx_obtain_fixed_of_clock() clk: imx6q: add ethernet refclock mux support clk: imx: add clk-gpr-mux driver dt-bindings: imx8ulp: clock: no spaces before tabs clk: imx6sll: add proper spdx license identifier clk: imx: imx93: invoke imx_register_uart_clocks clk: imx: remove clk_count of imx_register_uart_clocks clk: imx: get stdout clk count from device tree clk: imx: avoid memory leak * clk-core: clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() 
 - Various cleanups and improvements to Mediatek clk drivers to reduce
   code size and modernize the drivers
 - Support for Mediatek MT7891 SoC clks

* clk-microchip:
  clk: at91: do not compile dt-compat.c for sama7g5 and sam9x60
  clk: at91: mark ddr clocks as critical

* clk-allwinner:
  clk: sunxi-ng: d1: Add CAN bus gates and resets
  dt-bindings: clock: Add D1 CAN bus gates and resets
  clk: sunxi-ng: d1: Mark cpux clock as critical
  clk: sunxi-ng: d1: Allow building for R528/T113
  clk: sunxi-ng: Move SoC driver conditions to dependencies
  clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies
  clk: sunxi-ng: Avoid computing the rate twice
  clk: sunxi-ng: h3/h5: Model H3 CLK_DRAM as a fixed clock
  clk: sunxi-ng: fix ccu_mmc_timing.c kernel-doc issues

* clk-mediatek: (29 commits)
  clk: mediatek: clk-mtk: Remove unneeded semicolon
  clk: mediatek: remove MT8195 vppsys/0/1 simple_probe
  dt-bindings: arm: mediatek: migrate MT8195 vppsys0/1 to mtk-mmsys driver
  clk: mediatek: add MT7981 clock support
  dt-bindings: clock: mediatek: add mt7981 clock IDs
  dt-bindings: clock: Add compatibles for MT7981
  clk: mediatek: clk-mt7986-topckgen: Migrate to mtk_clk_simple_probe()
  clk: mediatek: clk-mt7986-topckgen: Properly keep some clocks enabled
  clk: mediatek: clk-mt6795-topckgen: Migrate to mtk_clk_simple_probe()
  clk: mediatek: clk-mt8186-topckgen: Migrate to mtk_clk_simple_probe()
  clk: mediatek: clk-mt8192: Migrate topckgen to mtk_clk_simple_probe()
  clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe()
  clk: mediatek: clk-mt8183: Join top_aud_muxes and top_aud_divs
  clk: mediatek: mt8186: Join top_adj_div and top_muxes
  clk: mediatek: mt8192: Join top_adj_divs and top_muxes
  clk: mediatek: clk-mt8192: Move CLK_TOP_CSW_F26M_D2 in top_divs
  clk: mediatek: mt8173: Migrate pericfg/topckgen to mtk_clk_simple_probe()
  clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe()
  clk: mediatek: Switch to mtk_clk_simple_probe() where possible
  clk: mediatek: mt8173: Break down clock drivers and allow module build
  ...

* clk-imx:
  clk: imx: pll14xx: fix recalc_rate for negative kdiv
  MAINTAINERS: clk: imx: Add Peng Fan as reviewer
  clk: imx: fix compile testing imxrt1050
  clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
  clk: imx6ul: add ethernet refclock mux support
  clk: imx6ul: fix enet1 gate configuration
  clk: imx: add imx_obtain_fixed_of_clock()
  clk: imx6q: add ethernet refclock mux support
  clk: imx: add clk-gpr-mux driver
  dt-bindings: imx8ulp: clock: no spaces before tabs
  clk: imx6sll: add proper spdx license identifier
  clk: imx: imx93: invoke imx_register_uart_clocks
  clk: imx: remove clk_count of imx_register_uart_clocks
  clk: imx: get stdout clk count from device tree
  clk: imx: avoid memory leak

* clk-core:
  clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
Merge branches 'clk-cleanup', 'clk-bindings', 'clk-renesas', 'clk-versa' and 'clk-amlogic' into clk-next 2023-02-23T19:03:54+00:00 Stephen Boyd sboyd@kernel.org 2023-02-23T19:03:54+00:00 792d6827288b05df93e487013118986fd14aee5c - Support for Versa 5P49V60 clks * clk-cleanup: clk: rs9: Drop unused pin_xin field clk: sprd: Add dependency for SPRD_UMS512_CLK clk: ralink: fix 'mt7621_gate_is_enabled()' function dt-bindings: clock: remove stih416 bindings drivers/clk: Remove "select SRCU" * clk-bindings: dt-bindings: clock: qcom,sm8450-camcc: constrain required-opps dt-bindings: clock: imx8m-clock: correct i.MX8MQ node name * clk-renesas: clk: renesas: rcar-gen3: Disable R-Car H3 ES1.* clk: renesas: r8a779g0: Add CAN-FD clocks clk: renesas: r8a779g0: Tidy up DMAC name on SYS-DMAC clk: renesas: r8a779a0: Tidy up DMAC name on SYS-DMAC clk: renesas: r8a779g0: Add custom clock for PLL2 clk: renesas: cpg-mssr: Remove superfluous check in resume code clk: renesas: r9a06g032: Handle h2mode setting based on USBF presence clk: renesas: cpg-mssr: Fix use after free if cpg_mssr_common_init() failed clk: renesas: r9a07g044: Add clock and reset entries for CRU clk: renesas: r9a09g011: Add SDHI/eMMC clock and reset entries clk: renesas: r9a09g011: Add USB clock and reset entries clk: renesas: r9a09g011: Add TIM clock and reset entries clk: renesas: r8a779g0: Add display related clocks clk: renesas: rcar-gen4: Restore PLL enum sort order clk: renesas: r8a779g0: Fix OSC predividers clk: renesas: r9a09g011: Add PWM clock and reset entries * clk-versa: dt-bindings: clock: versaclock5: Document 5P49V60 compatible string clk: vc5: Add support for 5P49V60 clk: vc5: Use `clamp()` to restrict PLL range * clk-amlogic: clk: meson: clk-cpu-dyndiv: switch from .round_rate to .determine_rate clk: meson: sclk-div: switch from .round_rate to .determine_rate clk: meson: dualdiv: switch from .round_rate to .determine_rate clk: meson: mpll: Switch from .round_rate to .determine_rate 
 - Support for Versa 5P49V60 clks

* clk-cleanup:
  clk: rs9: Drop unused pin_xin field
  clk: sprd: Add dependency for SPRD_UMS512_CLK
  clk: ralink: fix 'mt7621_gate_is_enabled()' function
  dt-bindings: clock: remove stih416 bindings
  drivers/clk: Remove "select SRCU"

* clk-bindings:
  dt-bindings: clock: qcom,sm8450-camcc: constrain required-opps
  dt-bindings: clock: imx8m-clock: correct i.MX8MQ node name

* clk-renesas:
  clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
  clk: renesas: r8a779g0: Add CAN-FD clocks
  clk: renesas: r8a779g0: Tidy up DMAC name on SYS-DMAC
  clk: renesas: r8a779a0: Tidy up DMAC name on SYS-DMAC
  clk: renesas: r8a779g0: Add custom clock for PLL2
  clk: renesas: cpg-mssr: Remove superfluous check in resume code
  clk: renesas: r9a06g032: Handle h2mode setting based on USBF presence
  clk: renesas: cpg-mssr: Fix use after free if cpg_mssr_common_init() failed
  clk: renesas: r9a07g044: Add clock and reset entries for CRU
  clk: renesas: r9a09g011: Add SDHI/eMMC clock and reset entries
  clk: renesas: r9a09g011: Add USB clock and reset entries
  clk: renesas: r9a09g011: Add TIM clock and reset entries
  clk: renesas: r8a779g0: Add display related clocks
  clk: renesas: rcar-gen4: Restore PLL enum sort order
  clk: renesas: r8a779g0: Fix OSC predividers
  clk: renesas: r9a09g011: Add PWM clock and reset entries

* clk-versa:
  dt-bindings: clock: versaclock5: Document 5P49V60 compatible string
  clk: vc5: Add support for 5P49V60
  clk: vc5: Use `clamp()` to restrict PLL range

* clk-amlogic:
  clk: meson: clk-cpu-dyndiv: switch from .round_rate to .determine_rate
  clk: meson: sclk-div: switch from .round_rate to .determine_rate
  clk: meson: dualdiv: switch from .round_rate to .determine_rate
  clk: meson: mpll: Switch from .round_rate to .determine_rate
dt-bindings: drop Sagar Kadam from SiFive binding maintainership 2023-02-21T16:22:04+00:00 Conor Dooley conor.dooley@microchip.com 2023-02-17T18:00:36+00:00 fb4b06f521c1cdf04088151ed587c188862e3111 Sagar's email listed in maintainers is bouncing as his division was sold off by the company. I attempted to contact him some days ago on what the bounce email told me was his new contact information, but am yet to receive a response. Paul and Palmer are listed on each of the bindings, both of whom were alive & well as of Wednesday so the bindings remain maintained. CC: Sagar Kadam <sagar.kadam@openfive.com> CC: Sagar Kadam <sagar.kadam@sifive.com> Link: https://lore.kernel.org/all/785425ca-4000-a7e4-16d6-4d68c91b158d@kernel.org/ Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/20230217180035.39658-1-conor@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> 
Sagar's email listed in maintainers is bouncing as his division was sold
off by the company. I attempted to contact him some days ago on what the
bounce email told me was his new contact information, but am yet to
receive a response.

Paul and Palmer are listed on each of the bindings, both of whom were
alive & well as of Wednesday so the bindings remain maintained.

CC: Sagar Kadam <sagar.kadam@openfive.com>
CC: Sagar Kadam <sagar.kadam@sifive.com>
Link: https://lore.kernel.org/all/785425ca-4000-a7e4-16d6-4d68c91b158d@kernel.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230217180035.39658-1-conor@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2023-02-20T23:49:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-20T23:49:56+00:00 950b6662e26e381cf8834b9b78b08261890ee697 Pull SoC DT updates from Arnd Bergmann: "About a quarter of the changes are for 32-bit arm, mostly filling in device support for existing machines and adding minor cleanups, mostly for Qualcomm and Samsung based machines. Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from Rockchips that have been around for a while but were lacking kernel support so far: RV1126 is a Vision SoC with an NPU and is used in the Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for TV boxes and so far only comes with a dts for its refernece design. The other 32-bit boards that were added are two ASpeed AST2600 based BMC boards, the Microchip sam9x60_curiosity development board (Armv5 based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53 and i.MX6ULL. On the RISC-V side, there are fewer patches, but a total of ten new single-board computers based on variations of the Allwinner D1/T113 chip, plus one more board based on Microchip Polarfire. As usual, arm64 has by far the most changes here, with over 700 non-merge changesets, among them over 400 alone for Qualcomm. The newly added SoCs this time are all recent high-end embedded SoCs for various markets, each on comes with support for its reference board: - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones - Qualcomm QDU1000/QRU1000 5G RAN platform - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs - TI J784S4 for industrial and automotive applications In total, there are 46 new arm64 machines: - Reference platforms for each of the five new SoCs - Three Amlogic based development boards - Six embedded machines based on NXP i.MX8MM and i.MX8MP - The Mediatek mt7986a based Banana Pi R3 router - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865) - Two LTE dongles, also based on MSM8916 - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610), SDM450 and SDM632 - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c) - Nine development boards based on Rockchips RK3588, RK3568, RK3566 and RK3328. - Five development machines based on TI K3 (AM642/AM654/AM68/AM69) The cleanup of dtc warnings continues across all platforms, adding to the total number of changes" * tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits) dt-bindings: riscv: correct starfive visionfive 2 compatibles ARM: dts: socfpga: Add enclustra PE1 devicetree dt-bindings: altera: Add enclustra mercury PE1 arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings arm64: dts: qcom: qcs404: align RPM G-Link node with bindings arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam arm64: dts: qcom: sc7280: Adjust zombie PWM frequency arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses arm64: dts: qcom: sm7225-fairphone-fp4: move status property down arm64: dts: qcom: pmk8350: Use the correct PON compatible arm64: dts: qcom: sc8280xp-x13s: Enable external display arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks arm64: dts: qcom: sm8350-hdk: enable GPU arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes arm64: dts: qcom: sm8350: finish reordering nodes arm64: dts: qcom: sm8350: move more nodes to correct place arm64: dts: qcom: sm8350: reorder device nodes ... 
Pull SoC DT updates from Arnd Bergmann:
 "About a quarter of the changes are for 32-bit arm, mostly filling in
  device support for existing machines and adding minor cleanups, mostly
  for Qualcomm and Samsung based machines.

  Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
  Rockchips that have been around for a while but were lacking kernel
  support so far: RV1126 is a Vision SoC with an NPU and is used in the
  Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
  for TV boxes and so far only comes with a dts for its refernece
  design.

  The other 32-bit boards that were added are two ASpeed AST2600 based
  BMC boards, the Microchip sam9x60_curiosity development board (Armv5
  based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
  for i.MX53 and i.MX6ULL.

  On the RISC-V side, there are fewer patches, but a total of ten new
  single-board computers based on variations of the Allwinner D1/T113
  chip, plus one more board based on Microchip Polarfire.

  As usual, arm64 has by far the most changes here, with over 700
  non-merge changesets, among them over 400 alone for Qualcomm. The
  newly added SoCs this time are all recent high-end embedded SoCs for
  various markets, each on comes with support for its reference board:

   - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
   - Qualcomm QDU1000/QRU1000 5G RAN platform
   - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
   - TI J784S4 for industrial and automotive applications

  In total, there are 46 new arm64 machines:
   - Reference platforms for each of the five new SoCs
   - Three Amlogic based development boards
   - Six embedded machines based on NXP i.MX8MM and i.MX8MP
   - The Mediatek mt7986a based Banana Pi R3 router
   - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
     (Snapdragon 662) and SM8250 (Snapdragon 865)
   - Two LTE dongles, also based on MSM8916
   - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
     SDM450 and SDM632
   - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
   - Nine development boards based on Rockchips RK3588, RK3568, RK3566
     and RK3328.
   - Five development machines based on TI K3 (AM642/AM654/AM68/AM69)

  The cleanup of dtc warnings continues across all platforms, adding to
  the total number of changes"

* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
  dt-bindings: riscv: correct starfive visionfive 2 compatibles
  ARM: dts: socfpga: Add enclustra PE1 devicetree
  dt-bindings: altera: Add enclustra mercury PE1
  arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
  arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
  arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
  arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
  arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
  arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
  arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
  arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
  arm64: dts: qcom: pmk8350: Use the correct PON compatible
  arm64: dts: qcom: sc8280xp-x13s: Enable external display
  arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
  arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
  arm64: dts: qcom: sm8350-hdk: enable GPU
  arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
  arm64: dts: qcom: sm8350: finish reordering nodes
  arm64: dts: qcom: sm8350: move more nodes to correct place
  arm64: dts: qcom: sm8350: reorder device nodes
  ...
dt-bindings: clock: add loongson-2 clock 2023-02-10T23:44:13+00:00 Yinbo Zhu zhuyinbo@loongson.cn 2022-11-29T03:41:57+00:00 8ffba409f495b735859f11dc776c328cc1068467 Add the Loongson-2 clock binding with DT schema format using json-schema. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221129034157.15036-4-zhuyinbo@loongson.cn Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Add the Loongson-2 clock binding with DT schema format using
json-schema.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221129034157.15036-4-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge branch '20221213152617.296426-1-konrad.dybcio@linaro.org' into HEAD 2023-02-09T04:09:15+00:00 Bjorn Andersson andersson@kernel.org 2023-02-09T04:09:15+00:00 c0cf43f63a013f9989cf4e66658836388bf80828 Merge DT binding to gain Camera clock defines for SM6350 
Merge DT binding to gain Camera clock defines for SM6350
dt-bindings: clock: add QCOM SM6350 camera clock bindings 2023-02-09T04:08:21+00:00 Konrad Dybcio konrad.dybcio@linaro.org 2022-12-13T15:26:15+00:00 717607f1a4d1a2e1dc0608be0242c99dcba55eaf Add device tree bindings for camera clock controller for Qualcomm Technology Inc's SM6350 SoC. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org 
Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SM6350 SoC.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org