linux.git/Documentation/devicetree/bindings/clock, branch v6.15 Linux kernel source tree Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2025-03-30T00:23:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-03-30T00:23:34+00:00 59c35416f4246aee66b5f5523fdc950b83325d82 Pull clk updates from Stephen Boyd: "Here's the pile of clk driver patches. The usual suspects^Wsilicon vendors are all here, adding new SoC support and fixing existing code. There are a few patches to the clk framework here as well. They've been baking in linux-next for weeks so I'm hoping we don't have to revert them. The disable OF node patch is probably the scariest one although it seems unlikely that a system would be relying on a driver _not_ probing because the clk never appeared, but you never know. Nothing looks out of the ordinary on the driver side but that's because it's mostly a bunch of data. Core: - Use dev_err_probe() in the clk registration path (Peering into the crystal ball shows many patches that remove printks) - Check for disabled OF nodes in of_clk_get_hw_from_clkspec() New Drivers: - Allwinner A523/T527 clk driver - Qualcomm IPQ9574 NSS clk driver - Qualcomm QCS8300 GPU and video clk drivers - Qualcomm SDM429 RPM clks - Qualcomm QCM6490 LPASS (low power audio) resets - Samsung Exynos2200: driver for several clock controllers (Alive, CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS) - Samsung Exynos7870: Driver for several clock controllers (Alive, MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI) - Rockchip rk3528 and rk3562 clk driver Updates: - Various fixes to SoC clk drivers for incorrect data, avoid touching protected registers, etc. - Additions for some missing clks in existing SoC clk drivers - DT schema conversions from text to YAML - Kconfig cleanups to allow drivers to be compiled on moar architectures" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: qcom: Add NSS clock Controller driver for IPQ9574 clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps clk: amlogic: a1: fix a typo clk: amlogic: gxbb: drop non existing 32k clock parent clk: amlogic: gxbb: drop incorrect flag on 32k clock clk: amlogic: g12b: fix cluster A parent data clk: amlogic: g12a: fix mmc A peripheral clock dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles dt-bindings: reset: fix double id on rk3562-cru reset ids drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490 dt-bindings: clock: qcom: Add compatible for QCM6490 boards clk: qcom: gdsc: Update the status poll timeout for GDSC clk: qcom: gdsc: Set retain_ff before moving to HW CTRL clk: davinci: remove support for da830 ... 
Pull clk updates from Stephen Boyd:
 "Here's the pile of clk driver patches. The usual suspects^Wsilicon
  vendors are all here, adding new SoC support and fixing existing code.

  There are a few patches to the clk framework here as well. They've
  been baking in linux-next for weeks so I'm hoping we don't have to
  revert them. The disable OF node patch is probably the scariest one
  although it seems unlikely that a system would be relying on a driver
  _not_ probing because the clk never appeared, but you never know.

  Nothing looks out of the ordinary on the driver side but that's
  because it's mostly a bunch of data.

  Core:
   - Use dev_err_probe() in the clk registration path (Peering into the
     crystal ball shows many patches that remove printks)
   - Check for disabled OF nodes in of_clk_get_hw_from_clkspec()

  New Drivers:
   - Allwinner A523/T527 clk driver
   - Qualcomm IPQ9574 NSS clk driver
   - Qualcomm QCS8300 GPU and video clk drivers
   - Qualcomm SDM429 RPM clks
   - Qualcomm QCM6490 LPASS (low power audio) resets
   - Samsung Exynos2200: driver for several clock controllers (Alive,
     CMGP, HSI, PERIC/PERIS, TOP, UFS and VFS)
   - Samsung Exynos7870: Driver for several clock controllers (Alive,
     MIF, DISP AUD, FSYS, G3D, ISP, MFC and PERI)
   - Rockchip rk3528 and rk3562 clk driver

  Updates:
   - Various fixes to SoC clk drivers for incorrect data, avoid touching
     protected registers, etc.
   - Additions for some missing clks in existing SoC clk drivers
   - DT schema conversions from text to YAML
   - Kconfig cleanups to allow drivers to be compiled on moar
     architectures"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
  clk: qcom: Add NSS clock Controller driver for IPQ9574
  clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
  dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
  clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
  clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
  dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
  clk: amlogic: a1: fix a typo
  clk: amlogic: gxbb: drop non existing 32k clock parent
  clk: amlogic: gxbb: drop incorrect flag on 32k clock
  clk: amlogic: g12b: fix cluster A parent data
  clk: amlogic: g12a: fix mmc A peripheral clock
  dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
  dt-bindings: reset: fix double id on rk3562-cru reset ids
  drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
  clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
  dt-bindings: clock: qcom: Add compatible for QCM6490 boards
  clk: qcom: gdsc: Update the status poll timeout for GDSC
  clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
  clk: davinci: remove support for da830
  ...
Merge tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 2025-03-29T19:47:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-03-29T19:47:09+00:00 1c83601b8ffc1b4ba8dc7f35151131707a8a5ae7 Pull MIPS updates from Thomas Bogendoerfer: - Add support for multi-cluster configuration - Add quirks for enabling multi-cluster mode on EyeQ6 - Add DTS clocks for ralink - Cleanup realtek DTS - Other cleanups and fixes * tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (35 commits) MIPS: config: omega2+, vocore2: enable CLK_MTMIPS arch: mips: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX MIPS: cm: Fix warning if MIPS_CM is disabled MIPS: Fix Macro name MIPS: ds1287: Match ds1287_set_base_clock() function types MIPS: cevt-ds1287: Add missing ds1287.h include MIPS: dec: Declare which_prom() as static MIPS: Loongson2ef: Replace deprecated strncpy() with strscpy() mips: dts: ralink: mt7628a: update system controller node and its consumers mips: dts: ralink: mt7620a: update system controller node and its consumers mips: dts: ralink: rt3883: update system controller node and its consumers mips: dts: ralink: rt3050: update system controller node and its consumers mips: dts: ralink: rt2880: update system controller node and its consumers dt-bindings: clock: add clock definitions for Ralink SoCs MIPS: Use arch specific syscall name match function mips: dts: realtek: Add restart to Cisco SG220-26P mips: dts: realtek: Add RTL838x SoC peripherals mips: dts: realtek: Replace uart clock property mips: dts: realtek: Correct uart interrupt-parent mips: dts: realtek: Add SoC IRQ node for RTL838x ... 
Pull MIPS updates from Thomas Bogendoerfer:

 - Add support for multi-cluster configuration

 - Add quirks for enabling multi-cluster mode on EyeQ6

 - Add DTS clocks for ralink

 - Cleanup realtek DTS

 - Other cleanups and fixes

* tag 'mips_6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (35 commits)
  MIPS: config: omega2+, vocore2: enable CLK_MTMIPS
  arch: mips: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
  MIPS: cm: Fix warning if MIPS_CM is disabled
  MIPS: Fix Macro name
  MIPS: ds1287: Match ds1287_set_base_clock() function types
  MIPS: cevt-ds1287: Add missing ds1287.h include
  MIPS: dec: Declare which_prom() as static
  MIPS: Loongson2ef: Replace deprecated strncpy() with strscpy()
  mips: dts: ralink: mt7628a: update system controller node and its consumers
  mips: dts: ralink: mt7620a: update system controller node and its consumers
  mips: dts: ralink: rt3883: update system controller node and its consumers
  mips: dts: ralink: rt3050: update system controller node and its consumers
  mips: dts: ralink: rt2880: update system controller node and its consumers
  dt-bindings: clock: add clock definitions for Ralink SoCs
  MIPS: Use arch specific syscall name match function
  mips: dts: realtek: Add restart to Cisco SG220-26P
  mips: dts: realtek: Add RTL838x SoC peripherals
  mips: dts: realtek: Replace uart clock property
  mips: dts: realtek: Correct uart interrupt-parent
  mips: dts: realtek: Add SoC IRQ node for RTL838x
  ...
Merge branches 'clk-allwinner', 'clk-amlogic' and 'clk-qcom' into clk-next 2025-03-26T18:26:36+00:00 Stephen Boyd sboyd@kernel.org 2025-03-26T18:26:36+00:00 e988adcb5dee697a046f0270747c9409c41e8e2a * clk-allwinner: clk: sunxi-ng: add support for the A523/T527 PRCM CCU clk: sunxi-ng: a523: add reset lines clk: sunxi-ng: a523: add bus clock gates clk: sunxi-ng: a523: remaining mod clocks clk: sunxi-ng: a523: add USB mod clocks clk: sunxi-ng: a523: add interface mod clocks clk: sunxi-ng: a523: add system mod clocks clk: sunxi-ng: a523: add video mod clocks clk: sunxi-ng: a523: Add support for bus clocks clk: sunxi-ng: Add support for the A523/T527 CCU PLLs dt-bindings: clk: sunxi-ng: document two Allwinner A523 CCUs clk: sunxi-ng: Add support for update bit clk: sunxi-ng: mp: provide wrappers for setting feature flags clk: sunxi-ng: mp: introduce dual-divider clock clk: sunxi-ng: h616: Reparent GPU clock during frequency changes clk: sunxi-ng: h616: Add clock/reset for LCD TCON dt-bindings: clock: sun50i-h616-ccu: Add LCD TCON clk and reset * clk-amlogic: clk: amlogic: a1: fix a typo clk: amlogic: gxbb: drop non existing 32k clock parent clk: amlogic: gxbb: drop incorrect flag on 32k clock clk: amlogic: g12b: fix cluster A parent data clk: amlogic: g12a: fix mmc A peripheral clock * clk-qcom: (41 commits) clk: qcom: Add NSS clock Controller driver for IPQ9574 clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490 dt-bindings: clock: qcom: Add compatible for QCM6490 boards clk: qcom: gdsc: Update the status poll timeout for GDSC clk: qcom: gdsc: Set retain_ff before moving to HW CTRL clk: qcom: gcc-sm8650: Do not turn off USB GDSCs during gdsc_disable() clk: qcom: videocc: Constify 'struct qcom_cc_desc' clk: qcom: gpucc: Constify 'struct qcom_cc_desc' clk: qcom: dispcc: Constify 'struct qcom_cc_desc' clk: qcom: camcc: Constify 'struct qcom_cc_desc' dt-bindings: clock: qcom: sm8450-camcc: Remove qcom,x1e80100-camcc leftover clk: qcom: Add support for Video Clock Controller on QCS8300 clk: qcom: Add support for GPU Clock Controller on QCS8300 ... 
* clk-allwinner:
  clk: sunxi-ng: add support for the A523/T527 PRCM CCU
  clk: sunxi-ng: a523: add reset lines
  clk: sunxi-ng: a523: add bus clock gates
  clk: sunxi-ng: a523: remaining mod clocks
  clk: sunxi-ng: a523: add USB mod clocks
  clk: sunxi-ng: a523: add interface mod clocks
  clk: sunxi-ng: a523: add system mod clocks
  clk: sunxi-ng: a523: add video mod clocks
  clk: sunxi-ng: a523: Add support for bus clocks
  clk: sunxi-ng: Add support for the A523/T527 CCU PLLs
  dt-bindings: clk: sunxi-ng: document two Allwinner A523 CCUs
  clk: sunxi-ng: Add support for update bit
  clk: sunxi-ng: mp: provide wrappers for setting feature flags
  clk: sunxi-ng: mp: introduce dual-divider clock
  clk: sunxi-ng: h616: Reparent GPU clock during frequency changes
  clk: sunxi-ng: h616: Add clock/reset for LCD TCON
  dt-bindings: clock: sun50i-h616-ccu: Add LCD TCON clk and reset

* clk-amlogic:
  clk: amlogic: a1: fix a typo
  clk: amlogic: gxbb: drop non existing 32k clock parent
  clk: amlogic: gxbb: drop incorrect flag on 32k clock
  clk: amlogic: g12b: fix cluster A parent data
  clk: amlogic: g12a: fix mmc A peripheral clock

* clk-qcom: (41 commits)
  clk: qcom: Add NSS clock Controller driver for IPQ9574
  clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
  dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
  dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
  clk: qcom: gcc-msm8953: fix stuck venus0_core0 clock
  clk: qcom: mmcc-sdm660: fix stuck video_subcore0 clock
  dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps
  drivers: clk: qcom: ipq5424: fix the freq table of sdcc1_apps clock
  clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
  dt-bindings: clock: qcom: Add compatible for QCM6490 boards
  clk: qcom: gdsc: Update the status poll timeout for GDSC
  clk: qcom: gdsc: Set retain_ff before moving to HW CTRL
  clk: qcom: gcc-sm8650: Do not turn off USB GDSCs during gdsc_disable()
  clk: qcom: videocc: Constify 'struct qcom_cc_desc'
  clk: qcom: gpucc: Constify 'struct qcom_cc_desc'
  clk: qcom: dispcc: Constify 'struct qcom_cc_desc'
  clk: qcom: camcc: Constify 'struct qcom_cc_desc'
  dt-bindings: clock: qcom: sm8450-camcc: Remove qcom,x1e80100-camcc leftover
  clk: qcom: Add support for Video Clock Controller on QCS8300
  clk: qcom: Add support for GPU Clock Controller on QCS8300
  ...
Merge branches 'clk-rockchip', 'clk-samsung' and 'clk-imx' into clk-next 2025-03-26T18:26:32+00:00 Stephen Boyd sboyd@kernel.org 2025-03-26T18:26:32+00:00 3ce2e14a5b7e9eddb7234e9f1e2cddd34fbcce23 * clk-rockchip: dt-bindings: reset: fix double id on rk3562-cru reset ids clk: rockchip: Add clock controller for the RK3562 dt-bindings: clock: Add RK3562 cru clk: rockchip: rk3528: Add reset lookup table clk: rockchip: Add clock controller driver for RK3528 SoC clk: rockchip: Add PLL flag ROCKCHIP_PLL_FIXED_MODE dt-bindings: clock: Document clock and reset unit of RK3528 clk: rockchip: rk3328: fix wrong clk_ref_usb3otg parent clk: rockchip: rk3568: mark hclk_vi as critical clk: rockchip: rk3188: use PCLK_CIF0/1 clock IDs on RK3066 dt-bindings: clock: rk3188-common: add PCLK_CIF0/PCLK_CIF1 * clk-samsung: clk: samsung: Drop unused clk.h and of.h headers clk: samsung: Add missing mod_devicetable.h header clk: samsung: add initial exynos7870 clock driver clk: samsung: introduce Exynos2200 clock driver clk: samsung: clk-pll: add support for pll_4311 dt-bindings: clock: add clock definitions and documentation for exynos7870 CMU dt-bindings: clock: add Exynos2200 SoC clk: samsung: Fix UBSAN panic in samsung_clk_init() clk: samsung: Fix spelling mistake "stablization" -> "stabilization" clk: samsung: exynos990: Add CMU_PERIS block dt-bindings: clock: exynos990: Add CMU_PERIS block * clk-imx: clk: imx8mp: inform CCF of maximum frequency of clocks dt-bindings: clock: imx8m: document nominal/overdrive properties clk: clk-imx8mp-audiomix: fix dsp/ocram_a clock parents dt-bindings: clock: imx8mp: add axi clock 
* clk-rockchip:
  dt-bindings: reset: fix double id on rk3562-cru reset ids
  clk: rockchip: Add clock controller for the RK3562
  dt-bindings: clock: Add RK3562 cru
  clk: rockchip: rk3528: Add reset lookup table
  clk: rockchip: Add clock controller driver for RK3528 SoC
  clk: rockchip: Add PLL flag ROCKCHIP_PLL_FIXED_MODE
  dt-bindings: clock: Document clock and reset unit of RK3528
  clk: rockchip: rk3328: fix wrong clk_ref_usb3otg parent
  clk: rockchip: rk3568: mark hclk_vi as critical
  clk: rockchip: rk3188: use PCLK_CIF0/1 clock IDs on RK3066
  dt-bindings: clock: rk3188-common: add PCLK_CIF0/PCLK_CIF1

* clk-samsung:
  clk: samsung: Drop unused clk.h and of.h headers
  clk: samsung: Add missing mod_devicetable.h header
  clk: samsung: add initial exynos7870 clock driver
  clk: samsung: introduce Exynos2200 clock driver
  clk: samsung: clk-pll: add support for pll_4311
  dt-bindings: clock: add clock definitions and documentation for exynos7870 CMU
  dt-bindings: clock: add Exynos2200 SoC
  clk: samsung: Fix UBSAN panic in samsung_clk_init()
  clk: samsung: Fix spelling mistake "stablization" -> "stabilization"
  clk: samsung: exynos990: Add CMU_PERIS block
  dt-bindings: clock: exynos990: Add CMU_PERIS block

* clk-imx:
  clk: imx8mp: inform CCF of maximum frequency of clocks
  dt-bindings: clock: imx8m: document nominal/overdrive properties
  clk: clk-imx8mp-audiomix: fix dsp/ocram_a clock parents
  dt-bindings: clock: imx8mp: add axi clock
Merge branches 'clk-parent', 'clk-renesas', 'clk-mediatek' and 'clk-cleanup' into clk-next 2025-03-26T18:26:26+00:00 Stephen Boyd sboyd@kernel.org 2025-03-26T18:26:26+00:00 316f4b91f92fd1863f445a5d33c65c4e51de96e7 * clk-parent: clk: check for disabled clock-provider in of_clk_get_hw_from_clkspec() * clk-renesas: (24 commits) clk: renesas: r9a09g047: Add clock and reset signals for the TSU IP clk: renesas: rzv2h: Adjust for CPG_BUS_m_MSTOP starting from m = 1 clk: renesas: r7s9210: Distinguish clocks by clock type clk: renesas: rzg2l: Remove unneeded nullify checks clk: renesas: cpg-mssr: Remove obsolete nullify check clk: renesas: r9a09g057: Add entries for the DMACs clk: renesas: r9a09g047: Add CANFD clocks and resets clk: renesas: r9a09g047: Add CRU0 clocks and resets clk: renesas: rzv2h: Update error message clk: renesas: rzg2l: Update error message clk: renesas: r9a09g047: Add ICU clock/reset clk: renesas: r9a07g043: Fix HP clock source for RZ/Five clk: renesas: r9a09g047: Add SDHI clocks/resets clk: renesas: r8a779h0: Add VSPX clock clk: renesas: r8a779h0: Add FCPVX clock clk: renesas: r8a08g045: Check the source of the CPU PLL settings clk: renesas: r9a09g047: Add WDT clocks and resets clk: renesas: r8a779h0: Add ISP core clocks clk: renesas: r8a779g0: Add ISP core clocks clk: renesas: r8a779a0: Add ISP core clocks ... * clk-mediatek: clk: mediatek: Add SMI LARBs reset for MT8188 dt-bindings: clock: mediatek: Add SMI LARBs reset for MT8188 clk: mediatek: mt8188-vdo1: Add VDO1_DPI1_HDMI clock for hdmitx dt-bindings: clock: mediatek,mt8188: Add VDO1_DPI1_HDMI clock * clk-cleanup: dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles clk: davinci: remove support for da830 dt-bindings: clock: ti: Convert ti-clkctrl.txt to json-schema clk: mmp: Fix NULL vs IS_ERR() check clk: Print an error when clk registration fails clk: Correct the data types of the variables in clk_calc_new_rates clk: imgtec: use %pe for better readability of errors while printing clk: stm32f4: fix an uninitialized variable clk: keystone: syscon-clk: Do not use syscon helper to build regmap 
* clk-parent:
  clk: check for disabled clock-provider in of_clk_get_hw_from_clkspec()

* clk-renesas: (24 commits)
  clk: renesas: r9a09g047: Add clock and reset signals for the TSU IP
  clk: renesas: rzv2h: Adjust for CPG_BUS_m_MSTOP starting from m = 1
  clk: renesas: r7s9210: Distinguish clocks by clock type
  clk: renesas: rzg2l: Remove unneeded nullify checks
  clk: renesas: cpg-mssr: Remove obsolete nullify check
  clk: renesas: r9a09g057: Add entries for the DMACs
  clk: renesas: r9a09g047: Add CANFD clocks and resets
  clk: renesas: r9a09g047: Add CRU0 clocks and resets
  clk: renesas: rzv2h: Update error message
  clk: renesas: rzg2l: Update error message
  clk: renesas: r9a09g047: Add ICU clock/reset
  clk: renesas: r9a07g043: Fix HP clock source for RZ/Five
  clk: renesas: r9a09g047: Add SDHI clocks/resets
  clk: renesas: r8a779h0: Add VSPX clock
  clk: renesas: r8a779h0: Add FCPVX clock
  clk: renesas: r8a08g045: Check the source of the CPU PLL settings
  clk: renesas: r9a09g047: Add WDT clocks and resets
  clk: renesas: r8a779h0: Add ISP core clocks
  clk: renesas: r8a779g0: Add ISP core clocks
  clk: renesas: r8a779a0: Add ISP core clocks
  ...

* clk-mediatek:
  clk: mediatek: Add SMI LARBs reset for MT8188
  dt-bindings: clock: mediatek: Add SMI LARBs reset for MT8188
  clk: mediatek: mt8188-vdo1: Add VDO1_DPI1_HDMI clock for hdmitx
  dt-bindings: clock: mediatek,mt8188: Add VDO1_DPI1_HDMI clock

* clk-cleanup:
  dt-bindings: clocks: atmel,at91rm9200-pmc: add missing compatibles
  clk: davinci: remove support for da830
  dt-bindings: clock: ti: Convert ti-clkctrl.txt to json-schema
  clk: mmp: Fix NULL vs IS_ERR() check
  clk: Print an error when clk registration fails
  clk: Correct the data types of the variables in clk_calc_new_rates
  clk: imgtec: use %pe for better readability of errors while printing
  clk: stm32f4: fix an uninitialized variable
  clk: keystone: syscon-clk: Do not use syscon helper to build regmap
Merge branch '20250313110359.242491-1-quic_mmanikan@quicinc.com' into clk-for-6.15 2025-03-17T15:10:46+00:00 Bjorn Andersson andersson@kernel.org 2025-03-17T15:10:46+00:00 0139f7d4e50176d7d4f821c8cc1c65e44c41fd6f Merge the IPQ9574 NSSCC binding through a topic branch, to allow them to also be merged and used in the DeviceTree source tree. 
Merge the IPQ9574 NSSCC binding through a topic branch, to allow them to
also be merged and used in the DeviceTree source tree.
dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions 2025-03-17T15:10:37+00:00 Devi Priya quic_devipriy@quicinc.com 2025-03-13T11:03:56+00:00 28300ecedce41dad239e0779d0b640349db33ec6 Add NSSCC clock and reset definitions for ipq9574. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> Link: https://lore.kernel.org/r/20250313110359.242491-4-quic_mmanikan@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> 
Add NSSCC clock and reset definitions for ipq9574.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250313110359.242491-4-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
dt-bindings: clock: qcom,x1e80100-camcc: Fix the list of required-opps 2025-03-17T02:28:31+00:00 Vladimir Zapolskiy vladimir.zapolskiy@linaro.org 2025-03-04T14:31:52+00:00 d547913e87a6a40b8690c069492cddc0cef6c573 The switch to multiple power domains implies that the required-opps property shall be updated accordingly, a record in one property corresponds to a record in another one. Fixes: 7ec95ff9abf4 ("dt-bindings: clock: move qcom,x1e80100-camcc to its own file") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20250304143152.1799966-1-vladimir.zapolskiy@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> 
The switch to multiple power domains implies that the required-opps
property shall be updated accordingly, a record in one property
corresponds to a record in another one.

Fixes: 7ec95ff9abf4 ("dt-bindings: clock: move qcom,x1e80100-camcc to its own file")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250304143152.1799966-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt 2025-03-14T17:47:13+00:00 Arnd Bergmann arnd@arndb.de 2025-03-14T17:47:08+00:00 56beaf14443d42753b98b224b8a790064edade01 Samsung DTS ARM64 changes for v6.15 1. Google GS101: - Disable GSA core pinctrl because its registers are not available for normal world. - Add APM (Active Power Management) mailbox and the ACPM firmware nodes. - Add new boards: Google Pixel 6 Pro (Raven). - Enable framebuffer and reboot-mode. 2. Exynos990: - Add PERIS clock controller, MCT timer 3. Exynos8895: - Define all remaining serial engine (USI) and syscon nodes, add MMC. - Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte). 4. ExynosAutov920: Add UFS and CPU cache information. 5. Various cleanups. This includes two topic branches with DT bindings, which might be shared with other trees depending on needs: 1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller header constants. 2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines header constants rework. * tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits) arm64: dts: tesla: Change labels to lower-case arm64: dts: exynos: gs101: Change labels to lower-case arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC arm64: dts: exynosautov920: add CPU cache information arm64: dts: exynos: gs101: add ACPM protocol node arm64: dts: exynos: gs101: add AP to APM mailbox node arm64: dts: exynos: gs101: add SRAM node arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0) arm64: dts: exynos: gs101: align poweroff writes with downstream arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes arm64: dts: exynos8895: Rename PMU nodes to fixup sorting arm64: dts: exynos8895-dreamlte: enable support for the touchscreen arm64: dts: exynos8895-dreamlte: enable support for microSD storage arm64: dts: exynos8895: add a node for mmc arm64: dts: exynos8895: define all usi nodes arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1 arm64: dts: exynos990: Rename and sort PMU nodes arm64: dts: exynos990: Add CMU_PERIS and MCT nodes dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi dt-bindings: clock: exynos990: Add CMU_PERIS block ... Link: https://lore.kernel.org/r/20250309185601.10616-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Samsung DTS ARM64 changes for v6.15

1. Google GS101:
 - Disable GSA core pinctrl because its registers are not available for
   normal world.
 - Add APM (Active Power Management) mailbox and the ACPM firmware nodes.
 - Add new boards: Google Pixel 6 Pro (Raven).
 - Enable framebuffer and reboot-mode.

2. Exynos990:
 - Add PERIS clock controller, MCT timer

3. Exynos8895:
 - Define all remaining serial engine (USI) and syscon nodes, add MMC.
 - Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte).

4. ExynosAutov920: Add UFS and CPU cache information.

5. Various cleanups.

This includes two topic branches with DT bindings, which might be shared
with other trees depending on needs:
1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller
   header constants.
2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines
   header constants rework.

* tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits)
  arm64: dts: tesla: Change labels to lower-case
  arm64: dts: exynos: gs101: Change labels to lower-case
  arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC
  arm64: dts: exynosautov920: add CPU cache information
  arm64: dts: exynos: gs101: add ACPM protocol node
  arm64: dts: exynos: gs101: add AP to APM mailbox node
  arm64: dts: exynos: gs101: add SRAM node
  arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0)
  arm64: dts: exynos: gs101: align poweroff writes with downstream
  arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes
  arm64: dts: exynos8895: Rename PMU nodes to fixup sorting
  arm64: dts: exynos8895-dreamlte: enable support for the touchscreen
  arm64: dts: exynos8895-dreamlte: enable support for microSD storage
  arm64: dts: exynos8895: add a node for mmc
  arm64: dts: exynos8895: define all usi nodes
  arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1
  arm64: dts: exynos990: Rename and sort PMU nodes
  arm64: dts: exynos990: Add CMU_PERIS and MCT nodes
  dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
  dt-bindings: clock: exynos990: Add CMU_PERIS block
  ...

Link: https://lore.kernel.org/r/20250309185601.10616-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt 2025-03-14T17:43:41+00:00 Arnd Bergmann arnd@arndb.de 2025-03-14T17:43:40+00:00 d1221aeb5a44f1bbfe16a6efd8bc8b0bc3f565a6 New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588), Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568) New overlays: Video-adapters for Theobroma boards and one adapter used in hw test scenarios. Interesting bigger changes contain clock support for rk3528; support for the hdmi1 controller as well as hdmi-audio support on both controllers on rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic graphics support and can now do hdmi output. Another big block is that we're now doing overlays way better and are including build-testing for applied overlays to the base dtb - similar to how other arches already do this. Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588 (rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl) And a huge number of board-level improvements and additions. * tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits) arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D arm64: dts: rockchip: Add SFC nodes for rk3576 arm64: dts: rockchip: Add maskrom button to Radxa E20C arm64: dts: rockchip: Add SARADC node for RK3528 arm64: dts: rockchip: Add user button to Radxa E20C arm64: dts: rockchip: Add leds node to Radxa E20C arm64: dts: rockchip: Add HDMI support for rock-4d arm64: dts: rockchip: enable SCMI clk for RK3528 SoC arm64: dts: rockchip: Enable HDMI receiver on rock-5b arm64: dts: rockchip: Add device tree support for HDMI RX Controller arm64: dts: rockchip: Add rk3528 QoS register node dt-bindings: mfd: syscon: Add rk3528 QoS register compatible arm64: dts: rockchip: add MNT Reform 2 laptop dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE) dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10 arm64: dts: rockchip: Enable hdmi display on sige5 arm64: dts: rockchip: Add hdmi for rk3576 arm64: dts: rockchip: Add vop for rk3576 ... Link: https://lore.kernel.org/r/13791512.uLZWGnKmhe@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588),
Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568)

New overlays: Video-adapters for Theobroma boards and one adapter used
in hw test scenarios.

Interesting bigger changes contain clock support for rk3528; support for
the hdmi1 controller as well as hdmi-audio support on both controllers on
rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic
graphics support and can now do hdmi output.

Another big block is that we're now doing overlays way better and are
including build-testing for applied overlays to the base dtb - similar
to how other arches already do this.

Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588
(rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl)

And a huge number of board-level improvements and additions.

* tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits)
  arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D
  arm64: dts: rockchip: Add SFC nodes for rk3576
  arm64: dts: rockchip: Add maskrom button to Radxa E20C
  arm64: dts: rockchip: Add SARADC node for RK3528
  arm64: dts: rockchip: Add user button to Radxa E20C
  arm64: dts: rockchip: Add leds node to Radxa E20C
  arm64: dts: rockchip: Add HDMI support for rock-4d
  arm64: dts: rockchip: enable SCMI clk for RK3528 SoC
  arm64: dts: rockchip: Enable HDMI receiver on rock-5b
  arm64: dts: rockchip: Add device tree support for HDMI RX Controller
  arm64: dts: rockchip: Add rk3528 QoS register node
  dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
  arm64: dts: rockchip: add MNT Reform 2 laptop
  dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)
  dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon
  dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon
  arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10
  arm64: dts: rockchip: Enable hdmi display on sige5
  arm64: dts: rockchip: Add hdmi for rk3576
  arm64: dts: rockchip: Add vop for rk3576
  ...

Link: https://lore.kernel.org/r/13791512.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>