linux.git/Documentation/devicetree/bindings/ata, branch v5.9

dt-bindings: Remove more cases of 'allOf' containing a '$ref'

2020-06-11T19:50:43+00:00

Another round of 'allOf' removals that came in this cycle.

json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.

This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.

Signed-off-by: Rob Herring

dt-bindings: ata: renesas,rcar-sata: Add r8a7742 support

2020-05-28T20:04:03+00:00

Document SATA support for the RZ/G1H, which is compatible with
R-Car Gen2 SoC family.

Signed-off-by: Lad Prabhakar 
Reviewed-by: Marian-Cristian Rotariu 
Reviewed-by: Wolfram Sang 
Reviewed-by: Geert Uytterhoeven 
Signed-off-by: Rob Herring

dt-bindings: sata: Convert Calxeda SATA controller to json-schema

2020-05-03T16:10:41+00:00

Convert the Calxeda Highbank SATA controller binding to DT schema format
using json-schema.

Signed-off-by: Andre Przywara 
Cc: Jens Axboe 
Signed-off-by: Rob Herring

dt-bindings: Clean-up schema indentation formatting

2020-04-16T21:59:22+00:00

Fix various inconsistencies in schema indentation. Most of these are
list indentation which should be 2 spaces more than the start of the
enclosing keyword. This doesn't matter functionally, but affects running
scripts which do transforms on the schema files.

Signed-off-by: Rob Herring 
Acked-by: Maxime Ripard 
Acked-by: Lee Jones 
Acked-By: Vinod Koul 
Acked-by: Mark Brown 
Acked-by: Alexandre Belloni 
Signed-off-by: Rob Herring

dt-bindings: ata: rcar-sata: Convert to json-schema

2020-02-26T15:37:06+00:00

Convert the Renesas R-Car Serial-ATA Device Tree binding documentation
to json-schema.

While at it:
  - Remove the deprecated "renesas,rcar-sata" compatible value,
  - Add "iommus", "power-domains", and "resets" properties,
  - Update the example.

Signed-off-by: Geert Uytterhoeven 
Reviewed-by: Niklas Söderlund 
Signed-off-by: Rob Herring

Merge tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-01-30T15:47:58+00:00

Pull devicetree updates from Rob Herring:

 - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert)

 - Fix for DMA coherent devices on Power

 - Rework and simplify the DT phandle cache code

 - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART,
   STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC,
   STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010,
   DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks,
   Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI,
   Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM,
   Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI

 - New binding schemas for SATA and PATA controllers, TI and Infineon VR
   controllers, MAX31730

 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt,
   renesas,etheravb-r8a77961

 - Add USB 'super-speed-plus' as a documented speed

 - Vendor prefixes for broadmobi, calaosystems, kam, and mps

 - Clean-up the multiple flavors of ST-Ericsson vendor prefixes

* tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
  scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles"
  of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc
  dt-bindings: leds: Convert gpio-leds to DT schema
  dt-bindings: leds: Convert common LED binding to schema
  dt-bindings: PCI: Convert generic host binding to DT schema
  dt-bindings: PCI: Convert Arm Versatile binding to DT schema
  dt-bindings: Be explicit about installing deps
  dt-bindings: stm32: convert dfsdm to json-schema
  dt-bindings: serial: Convert STM32 UART to json-schema
  dt-bindings: serial: Convert rs485 bindings to json-schema
  dt-bindings: timer: Use non-empty ranges in example
  dt-bindings: arm-boards: typo fix
  dt-bindings: Add TI and Infineon VR Controllers as trivial devices
  dt-binding: usb: add "super-speed-plus"
  dt-bindings: rcar-csi2: Convert bindings to json-schema
  dt-bindings: iio: adc: ad7606: Fix wrong maxItems value
  dt-bindings: Convert Faraday FTIDE010 to DT schema
  dt-bindings: Create DT bindings for PATA controllers
  dt-bindings: Create DT bindings for SATA controllers
  dt: bindings: add vendor prefix for Kamstrup A/S
  ...

dt-bindings: Convert Faraday FTIDE010 to DT schema

2020-01-13T23:02:14+00:00

This uses the new pata-common.yaml schema to
convert the Faraday FTIDE010 to DT schema.

Cc: Rob Herring 
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij 
Signed-off-by: Rob Herring

dt-bindings: Create DT bindings for PATA controllers

2020-01-13T23:02:05+00:00

I need to create subnodes for drives connected to PATA
host controllers, and this needs to be supported generally,
so create a common YAML binding for "ide" that will support
subnodes with ports.

This has been designed as a subset of
ata/ahci-platform.txt with the bare essentials and
should be possible to extend or superset to cover the
common bindings.

Cc: Rob Herring 
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij 
Signed-off-by: Rob Herring

dt-bindings: Create DT bindings for SATA controllers

2020-01-13T23:01:15+00:00

I need to create subnodes for drives connected to SATA
host controllers, and this needs to be supported
generally, so create a common YAML binding for
"sata" that will support subnodes with ports.

This has been designed as a subset of
ata/ahci-platform.txt with the bare essentials and
should be possible to extend or superset to cover the
common bindings.

Cc: Rob Herring 
Cc: devicetree@vger.kernel.org
Cc: Sergei Shtylyov 
Signed-off-by: Linus Walleij 
[robh: fixup sata-port unit-address pattern]
Signed-off-by: Rob Herring

dt-bindings: ata: Document BCM7216 AHCI controller compatible

2019-12-26T03:48:33+00:00

The BCM7216 AHCI controller makes use of a specific reset controller
line/name, document the compatible string and the optional reset
properties.

Reviewed-by: Rob Herring 
Reviewed-by: Hans de Goede 
Signed-off-by: Florian Fainelli 
Signed-off-by: Jens Axboe