linux.git/Documentation/devicetree/bindings/ata, branch v4.13

ata: sata_rcar: add gen[23] fallback compatibility strings

2017-07-15T11:07:28+00:00

Add fallback compatibility string for R-Car Gen 2 and 3.

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, e.g. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme being adopted for
drivers for Renesas SoCs.

Signed-off-by: Simon Horman 
Acked-by: Sergei Shtylyov 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Rob Herring 
Signed-off-by: Tejun Heo

Merge branch 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2017-07-06T16:41:58+00:00

Pull libata updates from Tejun Heo:

 - Christoph added support for TCG OPAL self encrypting disks

 - Minwoo added support for ATA PASS-THROUGH(32)

 - Linus Walleij removed spurious drvdata assignments in some drivers

 - Support for a few new device and other fixes

* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (33 commits)
  sd: add support for TCG OPAL self encrypting disks
  libata: fix build warning from unused goto label
  libata: Support for an ATA PASS-THROUGH(32) command.
  ahci: Add Device ID for ASMedia 1061R and 1062R
  sata_via: Enable optional hotplug on VT6420
  ata: ahci_brcm: Avoid writing to read-only registers
  libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag
  libata: Add the AHCI_HFLAG_YES_ALPM flag
  ata: ftide010: fix resource printing
  libata: make the function name in comment match the actual function
  ata: sata_rcar: make of_device_ids const.
  ata: pata_octeon_cf: make of_device_ids const.
  libata: Convert bare printks to pr_cont
  libahci: wrong comments in ahci_do_softreset()
  ata: declare ata_port_info structures as const
  ata: Add driver for Faraday Technology FTIDE010
  ata: Add DT bindings for the Gemini SATA bridge
  ata: Add DT bindings for Faraday Technology FTIDE010
  libata: implement SECURITY PROTOCOL IN/OUT
  libata: factor out a ata_identify_page_supported helper
  ...

dt-bindings: ahci-fsl-qoriq: add ls1088a chip name to the list

2017-06-14T14:42:08+00:00

Signed-off-by: Tang Yuantian 
Acked-by: Rob Herring 
Signed-off-by: Shawn Guo

ata: Add DT bindings for the Gemini SATA bridge

2017-06-12T16:02:51+00:00

This adds device tree bindings for the Cortina Systems Gemini
PATA to SATA bridge.

Cc: devicetree@vger.kernel.org
Cc: John Feng-Hsin Chiang 
Cc: Greentime Hu 
Acked-by: Hans Ulli Kroll 
Acked-by: Rob Herring 
Signed-off-by: Linus Walleij 
Signed-off-by: Tejun Heo

ata: Add DT bindings for Faraday Technology FTIDE010

2017-06-12T16:02:51+00:00

This adds device tree bindings for the Faraday Technology
FTIDE010 found in the Storlink/Storm/Cortina Systems Gemini SoC.

I am not 100% sure that this part is from Faraday Technology but
a lot points in that direction:

- A later IDE interface called FTIDE020 exist and share some
  properties.

- The SATA bridge has the same Built In Self Test (BIST) that the
  Faraday FTSATA100 seems to have, and it has version number 0100
  in the device ID register, so this is very likely a FTSATA100
  bundled with the FTIDE010.

Cc: devicetree@vger.kernel.org
Cc: John Feng-Hsin Chiang 
Cc: Greentime Hu 
Acked-by: Hans Ulli Kroll 
Acked-by: Rob Herring 
Signed-off-by: Linus Walleij 
Signed-off-by: Tejun Heo

dt-bindings: ata: add DT bindings for ahci-dm816 SATA controller

2017-03-27T18:05:29+00:00

Add DT bindings for the onboard SATA controller present on the DM816x
SoCs.

Signed-off-by: Bartosz Golaszewski 
Acked-by: Rob Herring 
Signed-off-by: Tejun Heo

devicetree: bindings: add bindings for ahci-da850

2017-01-31T10:54:54+00:00

Add DT bindings for the TI DA850 AHCI SATA controller.

Signed-off-by: Bartosz Golaszewski 
Acked-by: Rob Herring 
Signed-off-by: Sekhar Nori

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-12-15T23:58:28+00:00

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "A couple of interesting new SoC platforms are now supported, these are
  the respective DTS sources:

   - Samsung Exynos5433 mobile phone platform, including an (almost)
     fully supported phone reference board.
   - Hisilicon Hip07 server platform and D05 board, the latest iteration
     of their product line, now with 64 Cortex-A72 cores across two
     sockets.
   - Allwinner A64 SoC, the first 64-bit chip from their "sunxi" product
     line, used in Android tablets and ultra-cheap development boards
   - NXP LS1046A Communication processor, improving on the earlier
     LS1043A with faster CPU cores
   - Qualcomm MSM8992 (Snapdragon 808) and MSM8994 (Snapdragon 810)
     mobile phone SoCs
   - Early support for the Nvidia Tegra Tegra186 SoC
   - Amlogic S905D is a minor variant of their existing Android consumer
     product line
   - Rockchip PX5 automotive platform, a close relative of their popular
     rk3368 Android tablet chips

  Aside from the respective evaluation platforms for the above chips,
  there are only a few consumer devices and boards added this time:

   - Huawei Nexus 6P (Angler) mobile phone
   - LG Nexus 5x (Bullhead) mobile phone
   - Nexbox A1 and A95X Android TV boxes
   - Pine64 development board based on Allwinner A64
   - Globalscale Marvell ESPRESSOBin community board based on Armada 3700
   - Renesas "R-Car Starter Kit Pro" (M3ULCB) low-cost automotive board

  For the existing platforms, we get bug fixes and new peripheral
  support for Juno, Renesas, Uniphier, Amlogic, Samsung, Broadcom,
  Rockchip, Berlin, and ZTE"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (168 commits)
  arm64: dts: fix build errors from missing dependencies
  ARM64: dts: meson-gxbb: add SCPI pre-1.0 compatible
  ARM64: dts: meson-gxl: Add support for Nexbox A95X
  ARM64: dts: meson-gxm: Add support for the Nexbox A1
  ARM: dts: artpec: add pcie support
  arm64: dts: berlin4ct-dmp: add missing unit name to /memory node
  arm64: dts: berlin4ct-stb: add missing unit name to /memory node
  arm64: dts: berlin4ct: add missing unit name to /soc node
  arm64: dts: qcom: msm8916: Add ddr support to sdhc1
  arm64: dts: exynos: Enable HS400 mode for eMMC for TM2
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM64: dts: Add support for Meson GXM
  dt-bindings: add rockchip RK1108 Evaluation board
  arm64: dts: NS2: Add PCI PHYs
  arm64: dts: NS2: enable sdio1
  arm64: dts: exynos: Add the mshc_2 node for supporting T-Flash
  arm64: tegra: Add NVIDIA P2771 board support
  arm64: tegra: Enable PSCI on P3310
  arm64: tegra: Add NVIDIA P3310 processor module support
  arm64: tegra: Add GPIO controllers on Tegra186
  ...

dt-bindings: ahci-fsl-qoriq: updated for SoC ls1046a

2016-10-21T13:33:47+00:00

Signed-off-by: Shaohui Xie 
Acked-by: Rob Herring 
Signed-off-by: Shawn Guo

ahci: st: Remove STiH416 dt example

2016-10-18T08:07:28+00:00

This platform is being removed from the kernel so remove
the dt example.

Signed-off-by: Peter Griffin 
Cc: 
Cc: 
Cc: 
Acked-by: Rob Herring