linux.git/Documentation/devicetree/bindings/arm, branch v6.9 Linux kernel source tree Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2024-03-21T20:21:31+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-21T20:21:31+00:00 bb41fe35dce709ea8f91d313c558ee6c68f705ef Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ... 
Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and a number of other driver
  subsystem updates for 6.9-rc1. Included in here are:

   - IIO driver updates, loads of new ones and evolution of existing ones

   - coresight driver updates

   - const cleanups for many driver subsystems

   - speakup driver additions

   - platform remove callback void cleanups

   - mei driver updates

   - mhi driver updates

   - cdx driver updates for MSI interrupt handling

   - nvmem driver updates

   - other smaller driver updates and cleanups, full details in the
    shortlog

  All of these have been in linux-next for a long time with no reported
  issue, other than a build warning for the speakup driver"

The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.

Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/

* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
  binder: remove redundant variable page_addr
  uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
  uio_pruss: UIO_MEM_DMA_COHERENT conversion
  cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
  uio: introduce UIO_MEM_DMA_COHERENT type
  cdx: add MSI support for CDX bus
  pps: use cflags-y instead of EXTRA_CFLAGS
  speakup: Add /dev/synthu device
  speakup: Fix 8bit characters from direct synth
  parport: sunbpp: Convert to platform remove callback returning void
  parport: amiga: Convert to platform remove callback returning void
  char: xillybus: Convert to platform remove callback returning void
  vmw_balloon: change maintainership
  MAINTAINERS: change the maintainer for hpilo driver
  char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
  hpet: remove hpets::hp_clocksource
  platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
  char: xilinx_hwicap: drop casting to void in dev_set_drvdata
  greybus: move is_gb_* functions out of greybus.h
  greybus: Remove usage of the deprecated ida_simple_xx() API
  ...
Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2024-03-15T19:37:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-15T19:37:59+00:00 ab522e1478e3191114535f454a1c41ba3b2d1cb9 Pull devicetree updates from Rob Herring: "DT core: - Add cleanup.h based auto release of struct device_node pointers via __free marking and new for_each_child_of_node_scoped() iterator to use it. - Always create a base skeleton DT when CONFIG_OF is enabled. This supports several usecases of adding DT data on non-DT booted systems. - Move around some /reserved-memory code in preparation for further improvements - Add a stub for_each_property_of_node() for !OF - Adjust the printk levels on some messages - Fix __be32 sparse warning - Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver (currently orphaned) - Add Saravana Kannan and drop Frank Rowand as DT maintainers DT bindings: - Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc, fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and xlnx,sd-fec to DT schemas - Add existing, but undocumented fsl,imx-anatop binding - Add bunch of undocumented vendor prefixes used in compatible strings - Drop obsolete brcm,bcm2835-pm-wdt binding - Drop obsolete i2c.txt which as been replaced with schema in dtschema - Add DPS310 device and sort trivial-devices.yaml - Enable undocumented compatible checks on DT binding examples - More QCom maintainer fixes/updates - Updates to writing-schema.rst and DT submitting-patches.rst to cover some frequent review comments - Clean-up SPDX tags to use 'OR' rather than 'or'" * tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits) dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators of: unittest: Use for_each_child_of_node_scoped() of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling of: Add cleanup.h based auto release via __free(device_node) markings of: Move all FDT reserved-memory handling into of_reserved_mem.c of: Add KUnit test to confirm DTB is loaded of: unittest: treat missing of_root as error instead of fixing up x86/of: Unconditionally call unflatten_and_copy_device_tree() um: Unconditionally call unflatten_device_tree() of: Create of_root if no dtb provided by firmware of: Always unflatten in unflatten_and_copy_device_tree() dt-bindings: timer: mediatek: Convert to json-schema dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage dt-bindings: fsl-imx-sdma: fix HDMI audio index dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6 dt-bindings: soc: imx: fsl,imx-anatop: add binding dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML of: make for_each_property_of_node() available to to !OF ... 
Pull devicetree updates from Rob Herring:
 "DT core:

   - Add cleanup.h based auto release of struct device_node pointers via
     __free marking and new for_each_child_of_node_scoped() iterator to
     use it.

   - Always create a base skeleton DT when CONFIG_OF is enabled. This
     supports several usecases of adding DT data on non-DT booted
     systems.

   - Move around some /reserved-memory code in preparation for further
     improvements

   - Add a stub for_each_property_of_node() for !OF

   - Adjust the printk levels on some messages

   - Fix __be32 sparse warning

   - Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
     (currently orphaned)

   - Add Saravana Kannan and drop Frank Rowand as DT maintainers

  DT bindings:

   - Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
     fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
     xlnx,sd-fec to DT schemas

   - Add existing, but undocumented fsl,imx-anatop binding

   - Add bunch of undocumented vendor prefixes used in compatible
     strings

   - Drop obsolete brcm,bcm2835-pm-wdt binding

   - Drop obsolete i2c.txt which as been replaced with schema in
     dtschema

   - Add DPS310 device and sort trivial-devices.yaml

   - Enable undocumented compatible checks on DT binding examples

   - More QCom maintainer fixes/updates

   - Updates to writing-schema.rst and DT submitting-patches.rst to
     cover some frequent review comments

   - Clean-up SPDX tags to use 'OR' rather than 'or'"

* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
  dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
  of: unittest: Use for_each_child_of_node_scoped()
  of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
  of: Add cleanup.h based auto release via __free(device_node) markings
  of: Move all FDT reserved-memory handling into of_reserved_mem.c
  of: Add KUnit test to confirm DTB is loaded
  of: unittest: treat missing of_root as error instead of fixing up
  x86/of: Unconditionally call unflatten_and_copy_device_tree()
  um: Unconditionally call unflatten_device_tree()
  of: Create of_root if no dtb provided by firmware
  of: Always unflatten in unflatten_and_copy_device_tree()
  dt-bindings: timer: mediatek: Convert to json-schema
  dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
  soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
  dt-bindings: fsl-imx-sdma: fix HDMI audio index
  dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
  dt-bindings: soc: imx: fsl,imx-anatop: add binding
  dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
  dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
  of: make for_each_property_of_node() available to to !OF
  ...
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2024-03-15T18:48:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-15T18:48:01+00:00 6dff52b828655ccf416f46c08a48679740b724f0 Pull clk updates from Stephen Boyd: "Not a ton of stuff happening in the clk framework. We got some more devm helpers and we seem to be going in the direction of "just turn this stuff on already and leave me alone!" with the addition of a devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that into a pmdomain that drivers attach instead, but this API should help drivers simplify in the meantime. Outside of the devm wrappers, we've got the usual clk driver updates that are dominated by the major phone SoC vendors (Samsung and Qualcomm) and the non-critical driver fixes for things like incorrect topology descriptions and wrong registers or bit fields. More details are below, but I'd say that it looks pretty ordinary. The only thing that really jumps out at me is the Renesas clk driver that's ignoring clks that are assigned to remote processors in DeviceTree. That's a new feature that they're using to avoid marking clks as CLK_IGNORE_UNUSED based on the configuration of the system. Core: - Increase dev_id len for clkdev lookups - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks for a device - Add a devm variant of clk_rate_exclusive_get() New Drivers: - Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1 Elite SoC - Google GS101 PERIC0 and PERIC1 clock controllers - Exynos850 PDMA clocks - Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock controllers Removed Drivers: - Remove the unused Qualcomm sc7180 modem clk driver Updates: - Fix some static checker errors in the Hisilicon clk driver - Polarfire MSSPLL hardware has 4 output clocks (the driver supported previously only one output); each of these 4 outputs feed dividers and the output of each divider feed individual hardware blocks (e.g. CAN, Crypto, eMMC); individual hardware block drivers need to control their clocks thus clock driver support was added for all MSSPLL output clocks - Typo fixes in the Qualcomm IPQ5018 GCC driver - Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi - Properly terminate frequency tables in different Qualcomm clk drivers - Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953 - Add missing UFS CLKREF clks on Qualcomm SC8180X - Avoid significant delays during boot by adding a softdep on rpmhpd to Qualcomm SDM845 gcc driver - Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC driver - Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC driver - Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk driver - Switch display, GPU, video, and camera Qualcomm clk drivers to module_platform_driver() - Set a longer delay for Venus resets on many Qualcomm SoCs - Correct the GDSC wait times in the Qualcomm SDM845 display clk driver - Fix clock listing Oops on Amlogic axg - New pll-rate for Rockchip rk3568 - i2s rate improvements for Rockchip rk3399 - Rockchip rk3588 syscon clock fixes and removal of overall clock-number from the rk3588 binding header - A prerequisite for later improvements to the Rockchip rk3588 linked clocks - Minor clean-ups and error handling improvements in both composite-8m and SCU i.MX clock drivers - Fix for SAI_MCLK_SEL definition for i.MX8MP - Register the Samsung CMU MISC clock controller earlier, so the Multi Core Timer clocksource can use it on Google GS101 - Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI will get proper clock rates - Refactor the generic Samsung CPU clock controllers code, preparing it for supporting Exynos850 CPU clocks - Fix some clk kerneldoc warnings - Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas R-Car V4M - Ignore all clocks which are assigned to a non-Linux system in the Renesas clk driver - Add watchdog clock on Renesas RZ/G3S - Add camera (CRU) clock and reset on Renesas RZ/G2UL - Add support for the Renesas R-Car V4M (R8A779H0) SoC - Convert some clk bindings to YAML so they can be validated" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: zynq: Prevent null pointer dereference caused by kmalloc failure clk: fractional-divider: Use bit operations consistently clk: fractional-divider: Move mask calculations out of lock clk: Fix clk_core_get NULL dereference clk: starfive: jh7110-vout: Convert to platform remove callback returning void clk: starfive: jh7110-isp: Convert to platform remove callback returning void clk: imx: imx8-acm: Convert to platform remove callback returning void clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe() clk: Add a devm variant of clk_rate_exclusive_get() ... 
Pull clk updates from Stephen Boyd:
 "Not a ton of stuff happening in the clk framework. We got some more
  devm helpers and we seem to be going in the direction of "just turn
  this stuff on already and leave me alone!" with the addition of a
  devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that
  into a pmdomain that drivers attach instead, but this API should help
  drivers simplify in the meantime.

  Outside of the devm wrappers, we've got the usual clk driver updates
  that are dominated by the major phone SoC vendors (Samsung and
  Qualcomm) and the non-critical driver fixes for things like incorrect
  topology descriptions and wrong registers or bit fields. More details
  are below, but I'd say that it looks pretty ordinary. The only thing
  that really jumps out at me is the Renesas clk driver that's ignoring
  clks that are assigned to remote processors in DeviceTree. That's a
  new feature that they're using to avoid marking clks as
  CLK_IGNORE_UNUSED based on the configuration of the system.

  Core:
   - Increase dev_id len for clkdev lookups
   - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
     for a device
   - Add a devm variant of clk_rate_exclusive_get()

  New Drivers:
   - Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1
     Elite SoC
   - Google GS101 PERIC0 and PERIC1 clock controllers
   - Exynos850 PDMA clocks
   - Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock
     controllers

  Removed Drivers:
   - Remove the unused Qualcomm sc7180 modem clk driver

  Updates:
   - Fix some static checker errors in the Hisilicon clk driver
   - Polarfire MSSPLL hardware has 4 output clocks (the driver supported
     previously only one output); each of these 4 outputs feed dividers
     and the output of each divider feed individual hardware blocks
     (e.g. CAN, Crypto, eMMC); individual hardware block drivers need to
     control their clocks thus clock driver support was added for all
     MSSPLL output clocks
   - Typo fixes in the Qualcomm IPQ5018 GCC driver
   - Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
   - Properly terminate frequency tables in different Qualcomm clk
     drivers
   - Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
   - Add missing UFS CLKREF clks on Qualcomm SC8180X
   - Avoid significant delays during boot by adding a softdep on rpmhpd
     to Qualcomm SDM845 gcc driver
   - Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC
     driver
   - Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC
     driver
   - Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk
     driver
   - Switch display, GPU, video, and camera Qualcomm clk drivers to
     module_platform_driver()
   - Set a longer delay for Venus resets on many Qualcomm SoCs
   - Correct the GDSC wait times in the Qualcomm SDM845 display clk
     driver
   - Fix clock listing Oops on Amlogic axg
   - New pll-rate for Rockchip rk3568
   - i2s rate improvements for Rockchip rk3399
   - Rockchip rk3588 syscon clock fixes and removal of overall
     clock-number from the rk3588 binding header
   - A prerequisite for later improvements to the Rockchip rk3588 linked
     clocks
   - Minor clean-ups and error handling improvements in both
     composite-8m and SCU i.MX clock drivers
   - Fix for SAI_MCLK_SEL definition for i.MX8MP
   - Register the Samsung CMU MISC clock controller earlier, so the
     Multi Core Timer clocksource can use it on Google GS101
   - Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI
     will get proper clock rates
   - Refactor the generic Samsung CPU clock controllers code, preparing
     it for supporting Exynos850 CPU clocks
   - Fix some clk kerneldoc warnings
   - Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
     Renesas R-Car V4M
   - Ignore all clocks which are assigned to a non-Linux system in the
     Renesas clk driver
   - Add watchdog clock on Renesas RZ/G3S
   - Add camera (CRU) clock and reset on Renesas RZ/G2UL
   - Add support for the Renesas R-Car V4M (R8A779H0) SoC
   - Convert some clk bindings to YAML so they can be validated"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  clk: zynq: Prevent null pointer dereference caused by kmalloc failure
  clk: fractional-divider: Use bit operations consistently
  clk: fractional-divider: Move mask calculations out of lock
  clk: Fix clk_core_get NULL dereference
  clk: starfive: jh7110-vout: Convert to platform remove callback returning void
  clk: starfive: jh7110-isp: Convert to platform remove callback returning void
  clk: imx: imx8-acm: Convert to platform remove callback returning void
  clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
  clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
  clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
  clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
  clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
  clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
  clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
  clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
  clk: Add a devm variant of clk_rate_exclusive_get()
  ...
Merge tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2024-03-12T17:35:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-12T17:35:24+00:00 2184dbcde47aefd5358b14463a0d993013f5609e Pull ARM SoC driver updates from Arnd Bergmann: "This is the usual mix of updates for drivers that are used on (mostly ARM) SoCs with no other top-level subsystem tree, including: - The SCMI firmware subsystem gains support for version 3.2 of the specification and updates to the notification code - Feature updates for Tegra and Qualcomm platforms for added hardware support - A number of platforms get soc_device additions for identifying newly added chips from Renesas, Qualcomm, Mediatek and Google - Trivial improvements for firmware and memory drivers amongst others, in particular 'const' annotations throughout multiple subsystems" * tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) tee: make tee_bus_type const soc: qcom: aoss: add missing kerneldoc for qmp members soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param soc: qcom: spm: fix building with CONFIG_REGULATOR=n bus: ti-sysc: constify the struct device_type usage memory: stm32-fmc2-ebi: keep power domain on memory: stm32-fmc2-ebi: add MP25 RIF support memory: stm32-fmc2-ebi: add MP25 support memory: stm32-fmc2-ebi: check regmap_read return value dt-bindings: memory-controller: st,stm32: add MP25 support dt-bindings: bus: imx-weim: convert to YAML watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs MAINTAINERS: Update SCMI entry with HWMON driver MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC memory: tegra: Fix indentation memory: tegra: Add BPMP and ICC info for DLA clients memory: tegra: Correct DLA client names dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support firmware: arm_scmi: Update the supported clock protocol version ... 
Pull ARM SoC driver updates from Arnd Bergmann:
 "This is the usual mix of updates for drivers that are used on (mostly
  ARM) SoCs with no other top-level subsystem tree, including:

   - The SCMI firmware subsystem gains support for version 3.2 of the
     specification and updates to the notification code

   - Feature updates for Tegra and Qualcomm platforms for added hardware
     support

   - A number of platforms get soc_device additions for identifying
     newly added chips from Renesas, Qualcomm, Mediatek and Google

   - Trivial improvements for firmware and memory drivers amongst
     others, in particular 'const' annotations throughout multiple
     subsystems"

* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  tee: make tee_bus_type const
  soc: qcom: aoss: add missing kerneldoc for qmp members
  soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
  soc: qcom: spm: fix building with CONFIG_REGULATOR=n
  bus: ti-sysc: constify the struct device_type usage
  memory: stm32-fmc2-ebi: keep power domain on
  memory: stm32-fmc2-ebi: add MP25 RIF support
  memory: stm32-fmc2-ebi: add MP25 support
  memory: stm32-fmc2-ebi: check regmap_read return value
  dt-bindings: memory-controller: st,stm32: add MP25 support
  dt-bindings: bus: imx-weim: convert to YAML
  watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  MAINTAINERS: Update SCMI entry with HWMON driver
  MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
  memory: tegra: Fix indentation
  memory: tegra: Add BPMP and ICC info for DLA clients
  memory: tegra: Correct DLA client names
  dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
  firmware: arm_scmi: Update the supported clock protocol version
  ...
Merge tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt 2024-03-04T07:32:45+00:00 Arnd Bergmann arnd@arndb.de 2024-03-04T07:32:45+00:00 b74638bbda9dea20baebb8ab67f1b9d9de7891e6 Initial support for the rk3568 Qnap TS433 NAS, the rk3588-based Tiger SoM from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X. Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and rk356x video-decoder (missing interrupt-names). Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi R2 Pro (discussed with DT-maintainers beforehand of course). The VO1-GRF syscon needs its clock to work, and that clock also needed to be actually exported forst, so we're sharing a branch with the Rockchip clock-tree (that already got merged into the main clock-tree for 6.9) for this small shared code. And as another step on the long road to graphics output on rk3588, 6.9 will get the hdmi-phy via the phy-tree, so here the dts node is added. * tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433 arm64: dts: rockchip: Add basic support for QNAP TS-433 dt-bindings: arm: rockchip: Add QNAP TS-433 arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoM arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM dt-bindings: arm: rockchip: Add Theobroma-Systems RK3588 Q7 with baseboard arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588 dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X arm64: dts: rockchip: Add devicetree support for TB-RK3588X board arm64: dts: rockchip: adjust vendor on orangepi rk3399 board arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board arm64: dts: rockchip: Add HDMI0 PHY to rk3588 dt-bindings: clock: rk3588: add missing PCLK_VO1GRF dt-bindings: clock: rk3588: drop CLK_NR_CLKS clk: rockchip: rk3588: fix CLK_NR_CLKS usage Link: https://lore.kernel.org/r/3695004.ElGaqSPkdT@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Initial support for the rk3568 Qnap TS433 NAS, the rk3588-based Tiger SoM
from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X.
Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and
rk356x video-decoder (missing interrupt-names).

Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi
R2 Pro (discussed with DT-maintainers beforehand of course).

The VO1-GRF syscon needs its clock to work, and that clock also needed to
be actually exported forst, so we're sharing a branch with the Rockchip
clock-tree (that already got merged into the main clock-tree for 6.9) for
this small shared code.

And as another step on the long road to graphics output on rk3588, 6.9 will
get the hdmi-phy via the phy-tree, so here the dts node is added.

* tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
  arm64: dts: rockchip: Add basic support for QNAP TS-433
  dt-bindings: arm: rockchip: Add QNAP TS-433
  arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoM
  arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM
  dt-bindings: arm: rockchip: Add Theobroma-Systems RK3588 Q7 with baseboard
  arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s
  arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
  arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu
  arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588
  dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X
  arm64: dts: rockchip: Add devicetree support for TB-RK3588X board
  arm64: dts: rockchip: adjust vendor on orangepi rk3399 board
  arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
  dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro
  dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board
  arm64: dts: rockchip: Add HDMI0 PHY to rk3588
  dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
  dt-bindings: clock: rk3588: drop CLK_NR_CLKS
  clk: rockchip: rk3588: fix CLK_NR_CLKS usage

Link: https://lore.kernel.org/r/3695004.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'mvebu-dt-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt 2024-03-04T07:24:31+00:00 Arnd Bergmann arnd@arndb.de 2024-03-04T07:24:23+00:00 ada123939ee60aad7d468736d0da155f1c57d148 mvebu dt for 6.9 (part 1) a38x: improve solidrun armada 388 clearfog GTR device support: Initial device-tree merge for Clearfog GTR devices had issues causing problems with sfp connectors. The fixes are: - Converted armada-38x dt-bindings to yaml and replaced invalid compatibles. - Added pinctrl nodes for all referenced gpios and removed invalid io from first sfp connector. - Added descriptions for secondary sfp connector and updated labels of dsa switch ports. * tag 'mvebu-dt-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector arm: dts: marvell: clearfog-gtr: add missing pinctrl for all used gpios arm: dts: marvell: clearfog-gtr: sort pinctrl nodes alphabetically arm: dts: marvell: clearfog-gtr: add board-specific compatible strings arm: dts: marvell: clearfog: add pro variant compatible in legacy dts dt-bindings: marvell: a38x: add solidrun armada 385 clearfog gtr boards dt-bindings: marvell: a38x: add kobol helios-4 board dt-bindings: marvell: a38x: add solidrun armada 388 clearfog boards dt-bindings: marvell: a38x: convert soc compatibles to yaml Link: https://lore.kernel.org/r/87cysehr9k.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
mvebu dt for 6.9 (part 1)

a38x: improve solidrun armada 388 clearfog GTR device support:

Initial device-tree merge for Clearfog GTR devices had issues causing
problems with sfp connectors. The fixes are:
 - Converted armada-38x dt-bindings to yaml and replaced invalid
   compatibles.
 - Added pinctrl nodes for all referenced gpios and removed invalid io
   from first sfp connector.
 - Added descriptions for secondary sfp connector and updated labels
   of dsa switch ports.

* tag 'mvebu-dt-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
  arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
  arm: dts: marvell: clearfog-gtr: add missing pinctrl for all used gpios
  arm: dts: marvell: clearfog-gtr: sort pinctrl nodes alphabetically
  arm: dts: marvell: clearfog-gtr: add board-specific compatible strings
  arm: dts: marvell: clearfog: add pro variant compatible in legacy dts
  dt-bindings: marvell: a38x: add solidrun armada 385 clearfog gtr boards
  dt-bindings: marvell: a38x: add kobol helios-4 board
  dt-bindings: marvell: a38x: add solidrun armada 388 clearfog boards
  dt-bindings: marvell: a38x: convert soc compatibles to yaml

Link: https://lore.kernel.org/r/87cysehr9k.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: arm: syna: remove unstable remark 2024-03-01T21:53:41+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2024-02-24T08:44:14+00:00 abc6b0269197e824deeff3fccb79d84a6a330a1f Marvell Berlin SoCs (later Syna) bindings were marked as work-in-progress / unstable in 2015 in commit f07b4e49d27e ("Documentation: bindings: berlin: consider our dt bindings as unstable"). Almost nine years is enough, so drop the "unstable" remark and expect usual ABI rules. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240224084414.6264-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> 
Marvell Berlin SoCs (later Syna) bindings were marked as
work-in-progress / unstable in 2015 in commit f07b4e49d27e ("Documentation:
bindings: berlin: consider our dt bindings as unstable").  Almost nine
years is enough, so drop the "unstable" remark and expect usual ABI
rules.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224084414.6264-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'amlogic-arm64-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt 2024-03-01T18:03:19+00:00 Arnd Bergmann arnd@arndb.de 2024-03-01T18:03:18+00:00 4bf6c3b48f2c7f35bc00e457f7ee9161f4f93f10 Amlogic ARM64 DT changes for v6.9: - New Board: - Freebox Pop Player (IPTV Set-To-Box from Free FRench internet provider) - Add reset controller for Amlogic C3 - Set initial rate for the NPU on Amlogic G12 SoCs - Set initial clocks for USB on Amlogic A1 - Initialize Amlogic AXG SoC capacitance - Drop unstable remark on Amlogic Bindings - Add all Amlogic maintainers/reviewers on Amlogic SoCs bindings - Cleanups: - T7 whitespaces - Underscore in names * tag 'amlogic-arm64-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: dt-bindings: arm: amlogic: add Neil, Martin and Jerome as maintainers dt-bindings: arm: amlogic: remove unstable remark arm64: dts: amlogic: add fbx8am DT overlays arm64: dts: amlogic: add fbx8am board dt-bindings: arm: amlogic: add fbx8am binding dt-bindings: vendor-prefixes: add freebox arm64: dts: amlogic: replace underscores in node names arm64: dts: amlogic: t7: minor whitespace cleanup arm64: dts: amlogic: axg: initialize default SoC capacitance arm64: dts: amlogic: axg: move cpu cooling-cells to common dtsi arch: arm64: dts: meson: a1: add assigned-clocks for usb node arm64: dts: amlogic: meson-g12-common: Set the rates of the clocks for the NPU arm64: dts: amlogic: add reset controller for Amlogic C3 SoC Link: https://lore.kernel.org/r/1937f5ef-5d76-4259-931d-523c0e2f0a91@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Amlogic ARM64 DT changes for v6.9:
- New Board:
  - Freebox Pop Player (IPTV Set-To-Box from Free FRench internet provider)
- Add reset controller for Amlogic C3
- Set initial rate for the NPU on Amlogic G12 SoCs
- Set initial clocks for USB on Amlogic A1
- Initialize Amlogic AXG SoC capacitance
- Drop unstable remark on Amlogic Bindings
- Add all Amlogic maintainers/reviewers on Amlogic SoCs bindings
- Cleanups:
  - T7 whitespaces
  - Underscore in names

* tag 'amlogic-arm64-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  dt-bindings: arm: amlogic: add Neil, Martin and Jerome as maintainers
  dt-bindings: arm: amlogic: remove unstable remark
  arm64: dts: amlogic: add fbx8am DT overlays
  arm64: dts: amlogic: add fbx8am board
  dt-bindings: arm: amlogic: add fbx8am binding
  dt-bindings: vendor-prefixes: add freebox
  arm64: dts: amlogic: replace underscores in node names
  arm64: dts: amlogic: t7: minor whitespace cleanup
  arm64: dts: amlogic: axg: initialize default SoC capacitance
  arm64: dts: amlogic: axg: move cpu cooling-cells to common dtsi
  arch: arm64: dts: meson: a1: add assigned-clocks for usb node
  arm64: dts: amlogic: meson-g12-common: Set the rates of the clocks for the NPU
  arm64: dts: amlogic: add reset controller for Amlogic C3 SoC

Link: https://lore.kernel.org/r/1937f5ef-5d76-4259-931d-523c0e2f0a91@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'ti-k3-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt 2024-03-01T17:49:11+00:00 Arnd Bergmann arnd@arndb.de 2024-03-01T17:39:12+00:00 38efda94ed0bab411ebf2a70601b3356225f6d7f TI K3 device tree updates for v6.9 New Features across family / New SoCs: - J722s SoC and board support with OSPI NOR, CPSW ethernet - Camera capture support on mulitple J7xx SoCs, AM68, AM69 and AM62P SoCs - Wave5 Encoder/Decoder support for J721s2, J784s4 and AM62P Generic Cleanups/Fixes: - Stop spliting single mbox items - Adds MIT license along with GPL-2.0 for all TI DTS files - Moves PCIe EP nodes in overlays - VTM Power domain fixups for J7xx SoCs - Conversion of mmio mux users to reg-mux where possible - Drops unnecessary UART pinmuxes on J7xx SoCs - MMC TAP value updates for AM64/AM62A/AM62P for improved stability - DSS register space updates for AM65/AM62/AM62A SoC specific Fixes/Features: J7200: - Adds CAN support - New compatible for J7200 to support IO wakeup AM62A - HDMI Display (DSS) support - Move to simple-bus for main_conf node - eMMC, additional MMC/SD instance support AM62 - move to simple-bus for main_conf node AM654 - IOT2050-SM board support - IOT2050 DT refractoring. AM64 - SolidRun AM642 HummingBoard-T support and its DT overlays - ICSSG Ethernet support and associated peripherals Board specific fixes/Features: - Beagle Play MDIO and USB node fixes - TPM support on k3-am642-phyboard-electra and verdin-am62-mallow - Phycore-am64 ADC - PCIe + USB2.0 SERDES and PCIe + USB3.0 SERDES card support - USB1 support on verdin-am62 * tag 'ti-k3-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (126 commits) arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3 arm64: dts: add description for solidrun am642 som and evaluation board dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-am69-sk: Add support for OSPI flash arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board arm64: dts: ti: Enable overlays for SK-AM62P arm64: dts: ti: k3-am62p: Add nodes for CSI-RX arm64: dts: ti: k3-am62p: Add DMASS1 for CSI arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1 arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux arm64: dts: ti: Add common1 register space for AM62A SoC arm64: dts: ti: Add common1 register space for AM62x SoC arm64: dts: ti: Add common1 register space for AM65x SoC arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port ... Link: https://lore.kernel.org/r/e7e984db-47b9-404a-9471-5d2ed0effe1d@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
TI K3 device tree updates for v6.9

New Features across family / New SoCs:
- J722s SoC and board support with OSPI NOR, CPSW ethernet
- Camera capture support on mulitple J7xx SoCs, AM68, AM69 and AM62P SoCs
- Wave5 Encoder/Decoder support for J721s2, J784s4 and AM62P

Generic Cleanups/Fixes:
- Stop spliting single mbox items
- Adds MIT license along with GPL-2.0 for all TI DTS files
- Moves PCIe EP nodes in overlays
- VTM Power domain fixups for J7xx SoCs
- Conversion of mmio mux users to reg-mux where possible
- Drops unnecessary UART pinmuxes on J7xx SoCs
- MMC TAP value updates for AM64/AM62A/AM62P for improved stability
- DSS register space updates for AM65/AM62/AM62A

SoC specific Fixes/Features:
J7200:
- Adds CAN support
- New compatible for J7200 to support IO wakeup

AM62A
- HDMI Display (DSS) support
- Move to simple-bus for main_conf node
- eMMC, additional MMC/SD instance support

AM62
- move to simple-bus for main_conf node

AM654
- IOT2050-SM board support
- IOT2050 DT refractoring.

AM64
- SolidRun AM642 HummingBoard-T support and its DT overlays
- ICSSG Ethernet support and associated peripherals

Board specific fixes/Features:
- Beagle Play MDIO and USB node fixes
- TPM support on k3-am642-phyboard-electra and verdin-am62-mallow
- Phycore-am64 ADC
- PCIe + USB2.0 SERDES and PCIe + USB3.0 SERDES card support
- USB1 support on verdin-am62

* tag 'ti-k3-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (126 commits)
  arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
  arm64: dts: add description for solidrun am642 som and evaluation board
  dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
  arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node
  arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node
  arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node
  arm64: dts: ti: k3-am69-sk: Add support for OSPI flash
  arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board
  arm64: dts: ti: Enable overlays for SK-AM62P
  arm64: dts: ti: k3-am62p: Add nodes for CSI-RX
  arm64: dts: ti: k3-am62p: Add DMASS1 for CSI
  arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS
  arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support
  arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1
  arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl
  arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux
  arm64: dts: ti: Add common1 register space for AM62A SoC
  arm64: dts: ti: Add common1 register space for AM62x SoC
  arm64: dts: ti: Add common1 register space for AM65x SoC
  arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port
  ...

Link: https://lore.kernel.org/r/e7e984db-47b9-404a-9471-5d2ed0effe1d@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt 2024-03-01T12:48:03+00:00 Arnd Bergmann arnd@arndb.de 2024-03-01T12:48:03+00:00 d474a94e2c43ba0d2b6a084c1a0db2270bf127b1 Microchip AT91 device tree updates for v6.9 It contains: - use DMA for DBGU of at91sam9x5ek.dtsi and USART3 of at91sam9g25-gardena-smart-gateway.dts - the new SAMA7G54 Curiosity board - cleanups * tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sama7g5: add sama7g5 compatible ARM: dts: microchip: sam9x60: align dmas to the opening '<' ARM: dts: microchip: sama7g5: align dmas to the opening '<' ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board ARM: dts: microchip: sama7g5: Add flexcom 10 node dt-bindings: ARM: at91: Document Microchip SAMA7G54 Curiosity ARM: dts: microchip: gardena-smart-gateway: Use DMA for USART3 ARM: dts: microchip: at91sam9x5ek: Use DMA for DBGU serial port Link: https://lore.kernel.org/r/20240226183635.1964704-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Microchip AT91 device tree updates for v6.9

It contains:
- use DMA for DBGU of at91sam9x5ek.dtsi and USART3 of
  at91sam9g25-gardena-smart-gateway.dts
- the new SAMA7G54 Curiosity board
- cleanups

* tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: microchip: sama7g5: add sama7g5 compatible
  ARM: dts: microchip: sam9x60: align dmas to the opening '<'
  ARM: dts: microchip: sama7g5: align dmas to the opening '<'
  ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board
  ARM: dts: microchip: sama7g5: Add flexcom 10 node
  dt-bindings: ARM: at91: Document Microchip SAMA7G54 Curiosity
  ARM: dts: microchip: gardena-smart-gateway: Use DMA for USART3
  ARM: dts: microchip: at91sam9x5ek: Use DMA for DBGU serial port

Link: https://lore.kernel.org/r/20240226183635.1964704-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>