Pull ARM SoC driver updates from Arnd Bergmann:
 "A number of new drivers get added this time, along with many
  low-priority bugfixes. The most interesting changes by subsystem are:

  bus drivers:
   - Updates to the Broadcom bus interface driver to support newer SoC
     types
   - The TI OMAP sysc driver now supports updated DT bindings

  memory controllers:
   - A new driver for Tegra186 gets added
   - A new driver for the ti-emif sram, to allow relocating
     suspend/resume handlers there

  SoC specific:
   - A new driver for Qualcomm QMI, the interface to the modem on MSM
     SoCs
   - A new driver for power domains on the actions S700 SoC
   - A driver for the Xilinx Zynq VCU logicoreIP

  reset controllers:
   - A new driver for Amlogic Meson-AGX
   - various bug fixes

  tee subsystem:
   - A new user interface got added to enable asynchronous communication
     with the TEE supplicant.
   - A new method of using user space memory for communication with the
     TEE is added"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
  of: platform: fix OF node refcount leak
  soc: fsl: guts: Add a NULL check for devm_kasprintf()
  bus: ti-sysc: Fix smartreflex sysc mask
  psci: add CPU_IDLE dependency
  soc: xilinx: Fix Kconfig alignment
  soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
  soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
  soc: bcm: brcmstb: Be multi-platform compatible
  soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
  Revert "soc: brcmstb: Only register SoC device on STB platforms"
  bus: omap: add MODULE_LICENSE tags
  soc: brcmstb: Only register SoC device on STB platforms
  tee: shm: Potential NULL dereference calling tee_shm_register()
  soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
  dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
  soc: xilinx: Create folder structure for soc specific drivers
  of: platform: populate /firmware/ node from of_platform_default_populate_init()
  soc: samsung: Add SPDX license identifiers
  soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
  tee: shm: don't put_page on null shm->pages
  ...

Pull ARM SoC device tree updates from Arnd Bergmann:
 "We get a moderate number of new machines this time, and only one new
  SoC variant (Actions S700):

  Actions:
   - S700 Soc and CubieBoard7 development board
   - Allo.com Sparky Single-board-computer

  Allwinner:
   - Orange Pi R1 development board
   - Libre Computer Board ALL-H3-CC H3 single-board computer

  ASpeed ast2x00:
   - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
   - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
   - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400

  AT91:
   - Axentia Nattis/Natte digital signage
   - sama5d2 PTC-ek Evaluation board

  Freescale/NXP i.MX:
   - SolidRun Humminboard2 development board
   - Variscite DART-MX6 SoM and Carrier-board
   - Technologic TS-4600 and TS-7970 development board
   - Toradex Colibri iMX7D SoM board
   - v1.5 variant of Solidrun Cubox-i and Hummingboard

  Freescale/NXP Layerscape:
   - Moxa UC-8410A Series industrial computer

  Gemini:
   - D-Link DNS-313 NAS enclosure

  OMAP:
   - LogicPD OMAP35xx SOM-LV devkit
   - LogicPD OMAP35xx Torpedo devkit

  Renesas:
   - r8a77970 (V3M) Starter Kit board
   - r8a7795 (M3-W) Salvator-XS board

  We finally managed to get the dtc warnings under control, with no more
  build-time warnings for bad device tree files. This includes fixes for
  the majority of platforms, including nomadik, samsung, lpc32xx, STi,
  spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
  renesas, hisilicon, and broadcom.

  Files get rearranged on a few platforms, in particular the Marvell
  Armada 7K/8K device tree files are changed in preparation for future
  SoC support, based on more than two of the same chips in one package,
  and some boards get renamed for oxnas for consistency.

  Finally, many existing SoCs gain descriptions for additional on-chip
  devices that we can now support with kernel drivers:

   - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
   - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
   - Aspeed clk controller support
   - Freescale LS1088A, LS1021A device support
   - Gemini Ethernet, PCI, TVE, panel
   - Keystone gpio, qspi, more uarts
   - Mediatek cpufreq, regulator, clock, reset
   - Marvell thermal, cpufreq, nand
   - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
   - Rockchip Mipi, GPU, display
   - Samsung Exynos5433 PMU, power domain, nfc
   - Spreadtrum: sc9860 clocks
   - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
  arm64: dts: stratix10: fix SPI settings
  ARM: dts: socfpga: add i2c reset signals
  arm64: dts: stratix10: add USB ECC reset bit
  arm64: dts: stratix10: enable USB on the devkit
  ARM: dts: socfpga: disable over-current for Arria10 USB devkit
  ARM: dts: Nokia N9: add support for up/down keys in the dts
  ARM: dts: nomadik: add interrupt-parent for clcd
  ARM: dts: Add ethernet to a bunch of platforms
  ARM: dts: Add ethernet to the Gemini SoC
  ARM: dts: rename oxnas dts files
  ARM: dts: s5pv210: add interrupt-parent for ohci
  ARM: lpc3250: fix uda1380 gpio numbers
  ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
  ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
  ARM: dts: n900: Add aliases for lcd and tvout displays
  ARM: dts: Update ti-sysc data for existing users
  ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
  arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
  arm: spear13xx: Fix spics gpio controller's warning
  arm: spear13xx: Fix dmas cells
  ...

Pull DeviceTree updates from Rob Herring:

 - Convert to use memblock_virt_alloc in DT code which supports
   bootmem arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.

 - Enable running the DT unittests on UML

 - Use SPDX license tags on DT files

 - Fix early FDT kconfig ifdef logic

 - Clean-up unittest Makefile

 - Fix function comment for of_irq_parse_raw

 - Add missing documentation for linux,initrd-{start,end} properties

 - Clean-up of binding examples using uppercase hex

 - Add trivial devices W83773G and Infineon TLV493D-A1B6

 - Add missing STM32 SoC bindings

 - Various small binding doc fixes

* tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
  xtensa: remove arch specific early DT functions
  x86: remove arch specific early_init_dt_alloc_memory_arch
  nios2: remove arch specific early_init_dt_alloc_memory_arch
  mips: remove arch specific early_init_dt_alloc_memory_arch
  metag: remove arch specific early DT functions
  cris: remove arch specific early DT functions
  libfdt: remove unnecessary include directive from <linux/libfdt.h>
  of: unittest: refactor Makefile
  of/fdt: use memblock_virt_alloc for early alloc
  of: Use SPDX license tag for DT files
  of/fdt: Fix #ifdef dependency of early flattree declarations
  dt-bindings: h8300 clocksource: correct spelling of pulse
  dt-bindings: imx6q-pcie: Add required property for i.MX6SX
  mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding
  dt-bindings: Use lower case hex in unit-addresses
  dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
  dt-bindings: Add Infineon TLV493D-A1B6
  dt-bindings: mailbox: ti,message-manager: Fix interrupt name error
  dt-bindings: chosen: Document linux,initrd-{start,end}
  dt-bindings: arm: document supported STM32 SoC family
  ...

Pull arm64 updates from Catalin Marinas:
 "The main theme of this pull request is security covering variants 2
  and 3 for arm64. I expect to send additional patches next week
  covering an improved firmware interface (requires firmware changes)
  for variant 2 and way for KPTI to be disabled on unaffected CPUs
  (Cavium's ThunderX doesn't work properly with KPTI enabled because of
  a hardware erratum).

  Summary:

   - Security mitigations:
      - variant 2: invalidate the branch predictor with a call to
        secure firmware
      - variant 3: implement KPTI for arm64

   - 52-bit physical address support for arm64 (ARMv8.2)

   - arm64 support for RAS (firmware first only) and SDEI (software
     delegated exception interface; allows firmware to inject a RAS
     error into the OS)

   - perf support for the ARM DynamIQ Shared Unit PMU

   - CPUID and HWCAP bits updated for new floating point multiplication
     instructions in ARMv8.4

   - remove some virtual memory layout printks during boot

   - fix initial page table creation to cope with larger than 32M kernel
     images when 16K pages are enabled"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (104 commits)
  arm64: Fix TTBR + PAN + 52-bit PA logic in cpu_do_switch_mm
  arm64: Turn on KPTI only on CPUs that need it
  arm64: Branch predictor hardening for Cavium ThunderX2
  arm64: Run enable method for errata work arounds on late CPUs
  arm64: Move BP hardening to check_and_switch_context
  arm64: mm: ignore memory above supported physical address size
  arm64: kpti: Fix the interaction between ASID switching and software PAN
  KVM: arm64: Emulate RAS error registers and set HCR_EL2's TERR & TEA
  KVM: arm64: Handle RAS SErrors from EL2 on guest exit
  KVM: arm64: Handle RAS SErrors from EL1 on guest exit
  KVM: arm64: Save ESR_EL2 on guest SError
  KVM: arm64: Save/Restore guest DISR_EL1
  KVM: arm64: Set an impdef ESR for Virtual-SError using VSESR_EL2.
  KVM: arm/arm64: mask/unmask daif around VHE guests
  arm64: kernel: Prepare for a DISR user
  arm64: Unconditionally enable IESB on exception entry/return for firmware-first
  arm64: kernel: Survive corrected RAS errors notified by SError
  arm64: cpufeature: Detect CPU RAS Extentions
  arm64: sysreg: Move to use definitions for all the SCTLR bits
  arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early
  ...

The Software Delegated Exception Interface (SDEI) is an ARM standard
for registering callbacks from the platform firmware into the OS.
This is typically used to implement RAS notifications, or from an
IRQ that has been promoted to a firmware-assisted NMI.

Add a new devicetree binding to describe the SDE firmware interface.

Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull "i.MX device tree changes for 4.16" from Shawn Guo:

 - A few random updates for vf610-zii board: correct switch EEPROM size,
   enable edma1, correct GPIO expander interrupt, add PHYs for switch2
   device.
 - LS1021A device tree updates: add reboot and QSPI device nodes, label
   USB controllers, specify interrupt-affinity for PMU, fix TMR_FIPER1
   setting, enable esdhc device, add Moxa UC-8410A board support.
 - A bunch of patches from Fabio: fix reg - unit address mismatches,
   remove leading zero in unit address, move regulators out of
   simple-bus, move nodes with no reg property out of bus, remove extra
   clock cell, add missing phy-cells to usb-nop-xceiv, etc.
 - A couple series from Hummingboard developers: re-organise device tree
   files for better handling various board versions, and then add the
   new hummingboard2 board support on top of that.
 - Disable AC'97 input pins pad and add support for powering off for
   imx6qdl-udoo board.
 - Convert from fbdev to drm bindings for imx6sx-sdb and imx6sl-evk
   board.
 - Add device tree for Variscite DART-MX6 SoM and Carrier-board support.
 - Add new board support of TS-4600 and TS-7970 from Technologic
   Systems.
 - A series from Stefan to update imx7-colibri device tree and then add
   new version of Toradex Colibri iMX7D board with eMMC support.
 - Other random updates on various board support.

* tag 'imx-dt-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (126 commits)
  ARM: dts: imx7s: Avoid using label in unit address and reg
  ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
  ARM: dts: imx6qdl-hummingboard2: Remove leading zero in unit address
  ARM: dts: ls1021a: add support for Moxa UC-8410A open platform
  ARM: dts: imx51-babbage: Fix the 26MHz clock modelling
  ARM: dts: vf610-zii-dev-rev-b: add PHYs for switch2
  ARM: dts: vf610-zii-dev-rev-b: fix interrupt for GPIO expander
  ARM: dts: vf610-zii-dev: enable edma1
  ARM: dts: ls1021a-twr: Remove extra clock cell
  ARM: dts: ls1021a-qds: Remove extra clock cell
  ARM: dts: imx53: add srtc node
  dt-bindings: imx-gpcv2: Fix the unit address
  ARM: imx: dts: Use lower case for bindings notation
  ARM: dts: imx6q-h100: use usdhc2 VSELECT
  ARM: dts: imx6sx: Add support for PCI power domain
  ARM: dts: imx6sx: Fix PCI non-prefetchable memory range
  ARM: dts: imx6qdl-hummingboard2: rename regulators to match schematic
  ARM: dts: imx6qdl-hummingboard2: add v1.5 som with eMMC
  ARM: dts: imx6qdl-hummingboard2: add v1.5 som without eMMC
  ARM: dts: imx6qdl-hummingboard2: add PWM3 support
  ...

DT for 4.16

 - New boards:
   - Axentia Nattis with Natte power
   - sama5d2 PTC ek
 - Document and use extended TCB bindings

* tag 'at91-ab-4.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  ARM: dts: at91: sama5d2_ptc_ek: use TCB0 as timers
  ARM: dts: at91: sama5d27_som1_ek: use TCB0 as timers
  ARM: dts: at91: sama5d2 Xplained: use TCB0 as timers
  ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices
  ARM: dts: at91: vinco: use TCB2 as timers
  ARM: dts: at91: ma5d4: use TCB2 as timers
  ARM: dts: at91: sama5d4 Xplained: use TCB2 as timers
  ARM: dts: at91: sama5d4ek: use TCB2 as timers
  ARM: dts: at91: sama5d4: Add TCB2
  ARM: dts: at91: sama5d4: TC blocks are also simple-mfd and syscon devices
  ARM: dts: at91: linea/tse850-3: use TCB0 as timers
  ARM: dts: at91: sama5d3xek_cmp: use TCB0 as timers
  ARM: dts: at91: kizbox2: use TCB0 as timers
  ARM: dts: at91: sama5d3 Xplained: use TCB0 as timers
  ARM: dts: at91: sama5d3xek: use TCB0 as timers
  ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices
  ARM: dts: at91: kizboxmini: use TCB0 as timers
  ARM: dts: at91: cosino: use TCB0 as timers
  ARM: dts: at91: acme/g25: use TCB0 as timers
  ARM: dts: at91: at91sam9x5cm: use TCB0 as timers
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Actions Semi arm64 based SoC DT for v4.16

This adds S700 SoC and CubieBoard7.

* tag 'actions-arm64-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  arm64: dts: actions: Add S700 and CubieBoard7
  dt-bindings: power: Add Actions Semi S700 SPS
  dt-bindings: arm: actions: Add S700 and CubieBoard7

Signed-off-by: Olof Johansson <olof@lixom.net>

Actions Semi arm based SoC DT for v4.16

This adds a DT for the Allo.com Sparky SBC.

* tag 'actions-arm-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  arm: dts: owl-s500: Add Sparky
  dt-bindings: arm: actions: Add Sparky
  dt-bindings: Add vendor prefix for Allo.com

Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM/ARM64 based SoCs drivers changes for
4.16, please pull the following:

- Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to
  print the time to make it more future proof

- Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code
  work on newer ARM64-based chips, as well as perform the correct interface tuning
  for these chips to reach the expected performance

* tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux:
  soc: brcmstb: biuctrl: Move to early_initcall
  soc: brcmstb: Split initialization
  soc: brcmstb: biuctrl: Fine tune B53 MCP interface settings
  soc: brcmstb: biuctrl: Wire-up new registers
  soc: brcmstb: biuctrl: Prepare for saving/restoring other registers
  soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs
  soc: brcmstb: Make CPU credit offset more parameterized
  dt-bindings: arm: brcmstb: Correct BIUCTRL node documentation
  dt-bindings: arm: Add entry for Broadcom Brahma-B53
  firmware: raspberrypi: print time using time64_t

Signed-off-by: Olof Johansson <olof@lixom.net>