Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - A new driver for the power management controller on TI Keystone

   - Support for the prerelease "SCPI" firmware protocol that ended up
     being shipped by Amlogic in their GXBB SoC.

   - A soc_device can now be matched using a glob from inside the
     kernel, when another driver wants to know the specific chip it is
     running on and cannot find out from DT, firmware or hardware.

   - Renesas SoCs now support identification through the soc_device
     interface, both in user space and kernel.

   - Renesas r8a7743 and r8a7745 gain support for their system
     controller

   - A new checking module for the ARM "PSCI" (not to be confused with
     "SCPI" mentioned above) firmware interface.

   - A new driver for the Tegra GMI memory interface

   - Support for the Tegra firmware interfaces with their power
     management controllers

  As usual, the updates for the reset controller framework are merged
  here, as they tend to touch multiple SoCs as well, including a new
  driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
  interface.

  The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
  Rockchips SoCs see some further updates"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  misc: sram: remove useless #ifdef
  drivers: psci: Allow PSCI node to be disabled
  drivers: psci: PSCI checker module
  soc: renesas: Identify SoC and register with the SoC bus
  firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
  firmware: qcom: scm: Remove core, iface and bus clocks dependency
  dt-bindings: firmware: scm: Add MSM8996 DT bindings
  memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
  bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
  ARM: shmobile: Document DT bindings for Product Register
  soc: renesas: rcar-sysc: add R8A7745 support
  reset: Add Tegra BPMP reset driver
  dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
  dt-bindings: Add power domains to Tegra BPMP firmware
  firmware: tegra: Add BPMP support
  firmware: tegra: Add IVC library
  dt-bindings: firmware: Add bindings for Tegra BPMP
  mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
  mailbox: Add Tegra HSP driver
  firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
  ...

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "A couple of interesting new SoC platforms are now supported, these are
  the respective DTS sources:

   - Samsung Exynos5433 mobile phone platform, including an (almost)
     fully supported phone reference board.
   - Hisilicon Hip07 server platform and D05 board, the latest iteration
     of their product line, now with 64 Cortex-A72 cores across two
     sockets.
   - Allwinner A64 SoC, the first 64-bit chip from their "sunxi" product
     line, used in Android tablets and ultra-cheap development boards
   - NXP LS1046A Communication processor, improving on the earlier
     LS1043A with faster CPU cores
   - Qualcomm MSM8992 (Snapdragon 808) and MSM8994 (Snapdragon 810)
     mobile phone SoCs
   - Early support for the Nvidia Tegra Tegra186 SoC
   - Amlogic S905D is a minor variant of their existing Android consumer
     product line
   - Rockchip PX5 automotive platform, a close relative of their popular
     rk3368 Android tablet chips

  Aside from the respective evaluation platforms for the above chips,
  there are only a few consumer devices and boards added this time:

   - Huawei Nexus 6P (Angler) mobile phone
   - LG Nexus 5x (Bullhead) mobile phone
   - Nexbox A1 and A95X Android TV boxes
   - Pine64 development board based on Allwinner A64
   - Globalscale Marvell ESPRESSOBin community board based on Armada 3700
   - Renesas "R-Car Starter Kit Pro" (M3ULCB) low-cost automotive board

  For the existing platforms, we get bug fixes and new peripheral
  support for Juno, Renesas, Uniphier, Amlogic, Samsung, Broadcom,
  Rockchip, Berlin, and ZTE"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (168 commits)
  arm64: dts: fix build errors from missing dependencies
  ARM64: dts: meson-gxbb: add SCPI pre-1.0 compatible
  ARM64: dts: meson-gxl: Add support for Nexbox A95X
  ARM64: dts: meson-gxm: Add support for the Nexbox A1
  ARM: dts: artpec: add pcie support
  arm64: dts: berlin4ct-dmp: add missing unit name to /memory node
  arm64: dts: berlin4ct-stb: add missing unit name to /memory node
  arm64: dts: berlin4ct: add missing unit name to /soc node
  arm64: dts: qcom: msm8916: Add ddr support to sdhc1
  arm64: dts: exynos: Enable HS400 mode for eMMC for TM2
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM64: dts: Add support for Meson GXM
  dt-bindings: add rockchip RK1108 Evaluation board
  arm64: dts: NS2: Add PCI PHYs
  arm64: dts: NS2: enable sdio1
  arm64: dts: exynos: Add the mshc_2 node for supporting T-Flash
  arm64: tegra: Add NVIDIA P2771 board support
  arm64: tegra: Enable PSCI on P3310
  arm64: tegra: Add NVIDIA P3310 processor module support
  arm64: tegra: Add GPIO controllers on Tegra186
  ...

Pull ARM DT updates from Arnd Bergmann:
 "Lots of changes as usual, so I'm trying to be brief here. Most of the
  new hardware support has the respective driver changes merged through
  other trees or has had it available for a while, so this is where
  things come together.

  We get a DT descriptions for a couple of new SoCs, all of them
  variants of other chips we already support, and usually coming with a
  new evaluation board:

   - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices
   - Qualcomm MDM9615 LTE baseband
   - NXP imx6ull, the latest and smallest i.MX6 application processor variant
   - Renesas RZ/G (r8a7743 and r8a7745) application processors
   - Rockchip PX3, a variant of the rk3188 chip used in Android tablets
   - Rockchip rk1108 single-core application processor
   - ST stm32f746 Cortex-M7 based microcontroller
   - TI DRA71x automotive processors

  These are commercially available consumer platforms we now support:

   - Motorola Droid 4 (xt894) mobile phone
   - Rikomagic MK808 Android TV stick based on Rockchips rx3066
   - Cloud Engines PogoPlug v3 based on OX820
   - Various Broadcom based wireless devices:
      - Netgear R8500 router
      - Tenda AC9 router
      - TP-LINK Archer C9 V1
      - Luxul XAP-1510 Access point
   - Turris Omnia open hardware router based on Armada 385

  And a couple of new boards targeted at developers, makers or
  industrial integration:

   - Macnica Sodia development platform for Altera socfpga (Cyclone V)
   - MicroZed board based on Xilinx Zynq FPGA platforms
   - TOPEET itop/elite based on exynos4412
   - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615
   - NextThing CHIP Pro gadget
   - NanoPi M1 development board
   - AM571x-IDK industrial board based on TI AM5718
   - i.MX6SX UDOO Neo
   - Boundary Devices Nitrogen6_SOM2 (i.MX6)
   - Engicam i.CoreM6
   - Grinn i.MX6UL liteSOM/liteBoard
   - Toradex Colibri iMX6 module

  Other changes:

   - added peripherals on renesas, davinci, stm32f429, uniphier, sti,
     mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm,
     mvebu, allwinner, broadcom, exynos, zynq

   - Continued fixes for W=1 dtc warnings

   - The old STiH415/416 SoC support gets removed, these never made it
     into products and have served their purpose in the kernel as a
     template for teh newer chips from ST

   - The exynos4415 dtsi file is removed as nothing uses it.

   - Intel PXA25x can now be booted using devicetree"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits)
  arm: dts: zynq: Add MicroZed board support
  ARM: dts: da850: enable high speed for mmc
  ARM: dts: da850: Add node for pullup/pulldown pinconf
  ARM: dts: da850: enable memctrl and mstpri nodes per board
  ARM: dts: da850-lcdk: Add ethernet0 alias to DT
  ARM: dts: artpec: add pcie support
  ARM: dts: add support for Turris Omnia
  devicetree: Add vendor prefix for CZ.NIC
  ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node
  ARM: dts: berlin2q-marvell-dmp: fix regulators' name
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM: dts: r8a7794: Add device node for PRR
  ARM: dts: r8a7793: Add device node for PRR
  ARM: dts: r8a7792: Add device node for PRR
  ARM: dts: r8a7791: Add device node for PRR
  ARM: dts: r8a7790: Add device node for PRR
  ARM: dts: r8a7779: Add device node for PRR
  ARM: dts: r8a73a4: Add device node for PRR
  ARM: dts: sk-rzg1e: add Ether support
  ARM: dts: sk-rzg1e: initial device tree
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...

Pull DeviceTree updates from Rob Herring:

 - add various vendor prefixes.

 - fix NUMA node handling when "numa=off" is passed on kernel command
   line.

 - coding style Clean-up of overlay handling code.

 - DocBook fixes in DT platform driver code

 - Altera SoCFPGA binding addtions for freeze bridge, arria10 FPGA
   manager and FPGA bridges.

 - a couple of printk message fixes.

* tag 'devicetree-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (33 commits)
  dt: pwm: bcm2835: fix typo in clocks property name
  devicetree: add vendor prefix for National Instruments
  Revert "of: base: add support to get machine model name"
  of: Fix issue where code would fall through to error case.
  drivers/of: fix missing pr_cont()s in of_print_phandle_args
  devicetree: bindings: Add vendor prefix for Oki
  devicetree: bindings: Add vendor prefix for Andes Technology Corporation
  dt-bindings: add MYIR Tech hardware vendor prefix
  add bindings document for altera freeze bridge
  ARM: socfpga: add bindings doc for arria10 fpga manager
  ARM: socfpga: add bindings document for fpga bridge drivers
  of: base: add support to get machine model name
  of/platform: clarify of_find_device_by_node refcounting
  of/platform: fix of_platform_device_destroy comment
  of: Remove unused variable overlay_symbols
  of: Move setting of pointer to beside test for non-null
  of: Add back an error message, restructured
  of: Update comments to reflect changes and increase clarity
  of: Remove redundant size check
  of: Update structure of code to be clearer, also remove BUG_ON()
  ...

Pull arm64 updates from Catalin Marinas:

 - struct thread_info moved off-stack (also touching
   include/linux/thread_info.h and include/linux/restart_block.h)

 - cpus_have_cap() reworked to avoid __builtin_constant_p() for static
   key use (also touching drivers/irqchip/irq-gic-v3.c)

 - uprobes support (currently only for native 64-bit tasks)

 - Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1
   switching to a reserved page table

 - CPU capacity information passing via DT or sysfs (used by the
   scheduler)

 - support for systems without FP/SIMD (IOW, kernel avoids touching
   these registers; there is no soft-float ABI, nor kernel emulation for
   AArch64 FP/SIMD)

 - handling of hardware watchpoint with unaligned addresses, varied
   lengths and offsets from base

 - use of the page table contiguous hint for kernel mappings

 - hugetlb fixes for sizes involving the contiguous hint

 - remove unnecessary I-cache invalidation in flush_cache_range()

 - CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1)

 - boot-time checks for writable+executable kernel mappings

 - simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart
   and make the arm64 kernel headers self-consistent (Xen headers patch
   merged separately)

 - Workaround for broken .inst support in certain binutils versions

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (60 commits)
  arm64: Disable PAN on uaccess_enable()
  arm64: Work around broken .inst when defective gas is detected
  arm64: Add detection code for broken .inst support in binutils
  arm64: Remove reference to asm/opcodes.h
  arm64: Get rid of asm/opcodes.h
  arm64: smp: Prevent raw_smp_processor_id() recursion
  arm64: head.S: Fix CNTHCTL_EL2 access on VHE system
  arm64: Remove I-cache invalidation from flush_cache_range()
  arm64: Enable HIBERNATION in defconfig
  arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN
  arm64: xen: Enable user access before a privcmd hvc call
  arm64: Handle faults caused by inadvertent user access with PAN enabled
  arm64: Disable TTBR0_EL1 during normal kernel execution
  arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1
  arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
  arm64: Factor out PAN enabling/disabling into separate uaccess_* macros
  arm64: Update the synchronous external abort fault description
  selftests: arm64: add test for unaligned/inexact watchpoint handling
  arm64: Allow hw watchpoint of length 3,5,6 and 7
  arm64: hw_breakpoint: Handle inexact watchpoint addresses
  ...

Pull "omap dts changes for v4.10, part 2" from Tony Lindgren:

Second set of device tree changes for omaps for v4.10 merge window:

- Fix up new instances of gpio-key,wakeup to use wakeup-source

- Add beaglebone LCDC blue-and-red-wiring property to make use
  of the new driver features

- Add bindings for IIO support for am335x and am437x

- Add palmas PMIC overide powerhold property for am57xx

- Update am335x-baltos to use phy-handle property

- Add initial support for am571x-idk

* tag 'omap-for-v4.10/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: AM571x-IDK Initial Support
  ARM: dts: am335x-baltos: use phy-phandle declarations
  ARM: dts: am57xx-idk-common: Add overide powerhold property
  ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property
  ARM: dts: am57xx-idk: Add Industrial output support
  ARM: dts: am57xx-idk: Add Industrial input support
  ARM: dts: am437x-idk: Add Industrial output support
  ARM: dts: am437x-idk: Add Industrial input support
  ARM: dts: am335x-icev2: Add ADC support
  ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming
  ARM: dts: am335x-icev2: Add Industrial input support
  ARM: dts: am335x-boneblack: Add blue-and-red-wiring -property to LCDC node
  ARM: dts: omap5: replace gpio-key,wakeup with wakeup-source property

Pull "Amlogic 64-bit DT updates for v4.10, round 2" from Kevin Hilman:

- new SoC support: S912/GXM series (8x A53)
- new boards: Nexbox A1 (S912), Nexbox A95X (S905X)
- resets for 2nd USB PHY
- update SCPI compatible for pre-v1.0 devices

* tag 'amlogic-dt64-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gxbb: add SCPI pre-1.0 compatible
  ARM64: dts: meson-gxl: Add support for Nexbox A95X
  ARM64: dts: meson-gxm: Add support for the Nexbox A1
  ARM64: dts: Add support for Meson GXM
  ARM64: dts: meson-gxbb: add the USB reset also to the second USB PHY

Pull "Rockchip dts64 changes for 4.10" from Heiko Stübner:

Some more powerdomains and usb2-otg support for the rk3399 as well
as the binding doc for the 32bit rk1108 eval board to prevent it
from conflicting with the recently added 64bit px5 board.

* tag 'v4.10-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  dt-bindings: add rockchip RK1108 Evaluation board
  arm64: dts: rockchip: add usb2-phy otg-port support for rk3399
  arm64: dts: rockchip: add pd_sd power-domain node for rk3399
  arm64: dts: rockchip: add eMMC's power domain support for rk3399
  arm64: dts: rockchip: add backlight support for rk3399 evb board
  arm64: dts: rockchip: add gmac needed pclk for rk3399 pd

Pull "Broadcom devicetree-arm64 changes for 4.10" from Florian Fainelli:

This pull request contains Broadcom ARM64 based SoC Device Tree changes for
4.10, please pull the following:

- Robin updates the Northstart 2 DTS to use the generic IOMMU binding

- Scott renames the Broadcom Northstar 2 binding document to use a standard name
  including the brcm vendor prefix

- Kamal adds the QSPI Device Tree node to the Northstar 2 SoC and updates the
  Northstar 2 SVK reference board DTS file with it enabled.

- Rob adds the Device Tree node for the Broadcom PDC (mailbox) hardware to the
  Northstar 2 SoC

- Jon enables the SDIO1 block and adds proper PCIe PHYs Device Tree nodes to the
  Northstar 2 SoC

- Ray adds required properties NAND controller properties to make NAND work on
  the Northstar 2 SVK board, this was submitted as a 4.9 fixes and is included
  here to resolve DTS file merges

- Andrea removes an incorrect power LED from the Raspberry Pi 3 DTS

- Andreas fixes the compatible string for the BCM2837 (Raspberry Pi 3)

- Eric defines standard pinctrl groups in the BCM2835 GPIO node

- Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes
  to use their appropriate pinctrl functions

- Linus adds names for the Raspberry Pi GPIO lines based on the datasheet

- Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block

- Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and
  Device Tree nodes he also uses the proper DTSI file to define the USB host mode
  for the USB Device Tree nodes

* tag 'arm-soc/for-4.10/devicetree-arm64' of http://github.com/Broadcom/stblinux: (23 commits)
  arm64: dts: NS2: Add PCI PHYs
  arm64: dts: NS2: enable sdio1
  ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED
  ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837
  ARM: bcm2835: Add names for the Raspberry Pi GPIO lines
  ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
  dt: bindings: add thermal device driver for bcm2835
  arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver.
  ARM: dts: bcm283x: fix typo in mailbox address
  DT: binding: bcm2835-mbox: fix address typo in example
  ARM64: dts: bcm2835: Fix bcm2837 compatible string
  arm64: dts: Update Broadcom NS2 to generic IOMMU binding
  arm64: dts: Updated NAND DT properties for NS2 SVK
  arm64: dts: rename ns2.txt to brcm,ns2.txt
  ARM64: dts: Add QSPI Device Tree node for NS2
  ARM64: dts: bcm283x: Use dtsi for USB host mode
  ARM: dts: bcm283x: drop alt3 from &gpio
  ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
  ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio
  ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio
  ...