There are valid cases when two nodes can have the same address. For
example, in Exynos SoCs there is USI IP-core, which might be configured
to provide UART, SPI or I2C block, all of which having the same base
register address. But only one can be enabled at a time. That looks like
this:

    usi@138200c0 {
        serial@13820000 {
            status = "okay";
        };

        i2c@13820000 {
            status = "disabled";
        };
    };

When running "make dt_binding_check", it reports next warning:

    Warning (unique_unit_address):
    /example-0/usi@138200c0/serial@13820000:
    duplicate unit-address (also used in node
    /example-0/usi@138200c0/i2c@13820000)

Disable "unique_unit_address" in DTC_FLAGS to suppress warnings like
that, but enable "unique_unit_address_if_enabled" warning, so that dtc
still reports a warning when two enabled nodes are having the same
address.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211203183517.11390-1-semen.protsenko@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

The dtschema version check works, but is not that clear when dtschema is
either not installed or not in the PATH. Add a separate check and
message if dt-doc-validate is not found.

Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Setting DT_SCHEMA_FILES allows the user to restrict the
"dt_binding_check" make target to a specified set of DT binding files.
However, yamllint is still run on all available files, which not only
takes time, but also outputs warnings for other binding files the
developer is not interested in.

Fix this by renaming "find_cmd" to "find_all_cmd", introducing a new
"find_cmd" to only return the files specified by DT_SCHEMA_FILES (if
present), and using the latter for yamllint and dt-doc-validate.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/174ab1d791b7bc65f3b0f11b72be13af1748c731.1634551582.git.geert+renesas@glider.be
[robh: Also use only DT_SCHEMA_FILES for dt-doc-validate]
Signed-off-by: Rob Herring <robh@kernel.org>

Use xargs sharding like "chk_bindings" does, to parallelize the
execution of yamllint.

This reduces the yamllint execution time from ca. 21 to 5 seconds on
i7-8700K.

Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c68bdbdf3112c4658e0748c8fc51959e69fbae2e.1634551582.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>

yamllint warnings go to stdout which means on a quiet build no warnings
are output. Fix this and redirect the yamllint output to stderr.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210820000047.1667819-1-robh@kernel.org

Pull Kbuild updates from Masahiro Yamada:

 - Evaluate $(call cc-option,...) etc. only for build targets

 - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux

 - Remove unnecessary --gcc-toolchains Clang flag because the --prefix
   flag finds the toolchains

 - Do not pass Clang's --prefix flag when using the integrated as

 - Check the assembler version in Kconfig time

 - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
   some dependencies in Kconfig

 - Fix invalid Module.symvers creation when building only modules
   without vmlinux

 - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
   set, but there is no module to build

 - Refactor module installation Makefile

 - Support zstd for module compression

 - Convert alpha and ia64 to use generic shell scripts to generate the
   syscall headers

 - Add a new elfnote to indicate if the kernel was built with LTO, which
   will be used by pahole

 - Flatten the directory structure under include/config/ so CONFIG
   options and filenames match

 - Change the deb source package name from linux-$(KERNELRELEASE) to
   linux-upstream

* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
  kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
  kbuild: deb-pkg: change the source package name to linux-upstream
  tools: do not include scripts/Kbuild.include
  kbuild: redo fake deps at include/config/*.h
  kbuild: remove TMPO from try-run
  MAINTAINERS: add pattern for dummy-tools
  kbuild: add an elfnote for whether vmlinux is built with lto
  ia64: syscalls: switch to generic syscallhdr.sh
  ia64: syscalls: switch to generic syscalltbl.sh
  alpha: syscalls: switch to generic syscallhdr.sh
  alpha: syscalls: switch to generic syscalltbl.sh
  sysctl: use min() helper for namecmp()
  kbuild: add support for zstd compressed modules
  kbuild: remove CONFIG_MODULE_COMPRESS
  kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
  kbuild: move module strip/compression code into scripts/Makefile.modinst
  kbuild: refactor scripts/Makefile.modinst
  kbuild: rename extmod-prefix to extmod_prefix
  kbuild: check module name conflict for external modules as well
  kbuild: show the target directory for depmod log
  ...

For simple text replacement, it is better to use a built-in function
instead of sed if possible. You can save one process forking.

I do not mean to replace all sed invocations because GNU Make itself
does not support regular expression (unless you use guile).

I just replaced simple ones.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

dt-validate has an option to warn on any compatible strings which don't
match any schema. The option has recently been improved to fix false
positives, so let's enable the option. This is useful for tracking
compatibles which are undocumented or not yet converted to DT schema.
Previously, the only check of undocumented compatible strings has been
an imperfect checkpatch.pl check.

The option is enabled by default for 'dtbs_check'. This will add more
warnings, but some platforms are down to only a handful of these
warnings (good job!).

There's about 100 cases in the binding examples, so the option is
disabled until these are fixed. In the meantime, they can be checked
with:

make DT_CHECKER_FLAGS=-m dt_binding_check

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210311233640.1581526-2-robh@kernel.org

There's several dependencies in dtschema since v2020.8.1 we need, so
let's bump the version required to v2021.2.1. Specifically, the
graph.yaml schema and improved undocumented compatible check are needed.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210311233640.1581526-1-robh@kernel.org

Pull Kbuild updates from Masahiro Yamada:

 - Fix false-positive build warnings for ARCH=ia64 builds

 - Optimize dictionary size for module compression with xz

 - Check the compiler and linker versions in Kconfig

 - Fix misuse of extra-y

 - Support DWARF v5 debug info

 - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
   exceeded the limit

 - Add generic syscall{tbl,hdr}.sh for cleanups across arches

 - Minor cleanups of genksyms

 - Minor cleanups of Kconfig

* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
  initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
  kbuild: remove deprecated 'always' and 'hostprogs-y/m'
  kbuild: parse C= and M= before changing the working directory
  kbuild: reuse this-makefile to define abs_srctree
  kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
  kconfig: omit --oldaskconfig option for 'make config'
  kconfig: fix 'invalid option' for help option
  kconfig: remove dead code in conf_askvalue()
  kconfig: clean up nested if-conditionals in check_conf()
  kconfig: Remove duplicate call to sym_get_string_value()
  Makefile: Remove # characters from compiler string
  Makefile: reuse CC_VERSION_TEXT
  kbuild: check the minimum linker version in Kconfig
  kbuild: remove ld-version macro
  scripts: add generic syscallhdr.sh
  scripts: add generic syscalltbl.sh
  arch: syscalls: remove $(srctree)/ prefix from syscall tables
  arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
  gen_compile_commands: prune some directories
  kbuild: simplify access to the kernel's version
  ...