The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card
that has analog TV, composite video, and FM radio inputs, an IR
remote, and provides audio only as Line Out, but not over USB.
Mine is prepared for an FM tuner, but not equipped with one.
Support for FM radio is therefore missing. The device contains:
 - Empia EM2860 USB bridge
 - Philips SAA7113 video decoder
 - NXP TDA9801T demodulator
 - Tena TNF931D-DFDR1 tuner
 - ST HCF4052 demux, switches input audio to Line Out

Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Tuner ranges were determined by USB capturing the vendor driver of a
MyGica UTV3 video capture card.

Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Modify section "Video and Sliced VBI Looping" in Documentation to explain
the vivid loopback support for video across multiple vivid instances.
Previous documentation is out-of-date as it was explaining looping in a
single vivid instance only.

Also, in "Some Future Improvements" the item "Add support to loop
from a specific output to a specific input across vivid instances"
can be dropped since that's now implemented.

Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Instead of using hardwired video loopback limited to a single vivid
instance, use the new 'Connected To' controls to only loopback if an
HDMI or S-Video input is connected to another output, which can be
in another vivid instance. Effectively this emulates connecting and
disconnecting an HDMI/S-Video cable.

The Loop Video control is dropped since it has now been replaced by
the new 'Connected To' controls. The Display Present has also been
dropped since it no longer fits.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Co-developed-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>

Modifying documentation to remove 'Capture Overlay section' as
destructive capture overlay support was removed.

See commit ccaa9d50ca73 ("media: vivid: drop overlay support")

Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

The module option supports_requests was not documented, add it.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Drop the "Video, VBI and RDS Looping" section, instead moving the
Video/VBI info to section "Video and Sliced VBI looping" and the
RDS info to section "Radio & RDS Looping".

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

The documentation contained several instances of "section X"
references, which no longer map to whatever X was.

Replace these by the section titles.

Also fix a single confusing typo in the "Radio & RDS Looping" section:
"are regular frequency intervals" -> "at regular frequency intervals"

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Add documentation for the PiSP Back End memory-to-memory ISP.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

Fix flags in X1 Yoga example. MEDIA_LNK_FL_DYNAMIC (0x4 in the link flag)
was removed in V4 Intel IPU6 and IPU6 input system drivers. Added -V flag
to media-ctl commands for X1 Yoga, lower-case v only makes it verbose
upper-case V sets the format.

Signed-off-by: Samuel Wein <sam@samwein.com>
[Sakari Ailus: Align subject line, rewrap commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>