linux.git/Documentation/admin-guide/kernel-parameters.txt, branch v6.9-rc2 Linux kernel source tree Merge tag 'trace-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace 2024-03-18T22:11:44+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-18T22:11:44+00:00 ad584d73a22b2f6e6b4c928956fdece5c44cdb3e Pull tracing updates from Steven Rostedt: "Main user visible change: - User events can now have "multi formats" The current user events have a single format. If another event is created with a different format, it will fail to be created. That is, once an event name is used, it cannot be used again with a different format. This can cause issues if a library is using an event and updates its format. An application using the older format will prevent an application using the new library from registering its event. A task could also DOS another application if it knows the event names, and it creates events with different formats. The multi-format event is in a different name space from the single format. Both the event name and its format are the unique identifier. This will allow two different applications to use the same user event name but with different payloads. - Added support to have ftrace_dump_on_oops dump out instances and not just the main top level tracing buffer. Other changes: - Add eventfs_root_inode Only the root inode has a dentry that is static (never goes away) and stores it upon creation. There's no reason that the thousands of other eventfs inodes should have a pointer that never gets set in its descriptor. Create a eventfs_root_inode desciptor that has a eventfs_inode descriptor and a dentry pointer, and only the root inode will use this. - Added WARN_ON()s in eventfs There's some conditionals remaining in eventfs that should never be hit, but instead of removing them, add WARN_ON() around them to make sure that they are never hit. - Have saved_cmdlines allocation also include the map_cmdline_to_pid array The saved_cmdlines structure allocates a large amount of data to hold its mappings. Within it, it has three arrays. Two are already apart of it: map_pid_to_cmdline[] and saved_cmdlines[]. More memory can be saved by also including the map_cmdline_to_pid[] array as well. - Restructure __string() and __assign_str() macros used in TRACE_EVENT() Dynamic strings in TRACE_EVENT() are declared with: __string(name, source) And assigned with: __assign_str(name, source) In the tracepoint callback of the event, the __string() is used to get the size needed to allocate on the ring buffer and __assign_str() is used to copy the string into the ring buffer. There's a helper structure that is created in the TRACE_EVENT() macro logic that will hold the string length and its position in the ring buffer which is created by __string(). There are several trace events that have a function to create the string to save. This function is executed twice. Once for __string() and again for __assign_str(). There's no reason for this. The helper structure could also save the string it used in __string() and simply copy that into __assign_str() (it also already has its length). By using the structure to store the source string for the assignment, it means that the second argument to __assign_str() is no longer needed. It will be removed in the next merge window, but for now add a warning if the source string given to __string() is different than the source string given to __assign_str(), as the source to __assign_str() isn't even used and will be going away. - Added checks to make sure that the source of __string() is also the source of __assign_str() so that it can be safely removed in the next merge window. Included fixes that the above check found. - Other minor clean ups and fixes" * tag 'trace-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits) tracing: Add __string_src() helper to help compilers not to get confused tracing: Use strcmp() in __assign_str() WARN_ON() check tracepoints: Use WARN() and not WARN_ON() for warnings tracing: Use div64_u64() instead of do_div() tracing: Support to dump instance traces by ftrace_dump_on_oops tracing: Remove second parameter to __assign_rel_str() tracing: Add warning if string in __assign_str() does not match __string() tracing: Add __string_len() example tracing: Remove __assign_str_len() ftrace: Fix most kernel-doc warnings tracing: Decrement the snapshot if the snapshot trigger fails to register tracing: Fix snapshot counter going between two tracers that use it tracing: Use EVENT_NULL_STR macro instead of open coding "(null)" tracing: Use ? : shortcut in trace macros tracing: Do not calculate strlen() twice for __string() fields tracing: Rework __assign_str() and __string() to not duplicate getting the string cxl/trace: Properly initialize cxl_poison region name net: hns3: tracing: fix hclgevf trace event strings drm/i915: Add missing ; to __assign_str() macros in tracepoint code NFSD: Fix nfsd_clid_class use of __string_len() macro ... 
Pull tracing updates from Steven Rostedt:
 "Main user visible change:

   - User events can now have "multi formats"

     The current user events have a single format. If another event is
     created with a different format, it will fail to be created. That
     is, once an event name is used, it cannot be used again with a
     different format. This can cause issues if a library is using an
     event and updates its format. An application using the older format
     will prevent an application using the new library from registering
     its event.

     A task could also DOS another application if it knows the event
     names, and it creates events with different formats.

     The multi-format event is in a different name space from the single
     format. Both the event name and its format are the unique
     identifier. This will allow two different applications to use the
     same user event name but with different payloads.

   - Added support to have ftrace_dump_on_oops dump out instances and
     not just the main top level tracing buffer.

  Other changes:

   - Add eventfs_root_inode

     Only the root inode has a dentry that is static (never goes away)
     and stores it upon creation. There's no reason that the thousands
     of other eventfs inodes should have a pointer that never gets set
     in its descriptor. Create a eventfs_root_inode desciptor that has a
     eventfs_inode descriptor and a dentry pointer, and only the root
     inode will use this.

   - Added WARN_ON()s in eventfs

     There's some conditionals remaining in eventfs that should never be
     hit, but instead of removing them, add WARN_ON() around them to
     make sure that they are never hit.

   - Have saved_cmdlines allocation also include the map_cmdline_to_pid
     array

     The saved_cmdlines structure allocates a large amount of data to
     hold its mappings. Within it, it has three arrays. Two are already
     apart of it: map_pid_to_cmdline[] and saved_cmdlines[]. More memory
     can be saved by also including the map_cmdline_to_pid[] array as
     well.

   - Restructure __string() and __assign_str() macros used in
     TRACE_EVENT()

     Dynamic strings in TRACE_EVENT() are declared with:

         __string(name, source)

     And assigned with:

        __assign_str(name, source)

     In the tracepoint callback of the event, the __string() is used to
     get the size needed to allocate on the ring buffer and
     __assign_str() is used to copy the string into the ring buffer.
     There's a helper structure that is created in the TRACE_EVENT()
     macro logic that will hold the string length and its position in
     the ring buffer which is created by __string().

     There are several trace events that have a function to create the
     string to save. This function is executed twice. Once for
     __string() and again for __assign_str(). There's no reason for
     this. The helper structure could also save the string it used in
     __string() and simply copy that into __assign_str() (it also
     already has its length).

     By using the structure to store the source string for the
     assignment, it means that the second argument to __assign_str() is
     no longer needed.

     It will be removed in the next merge window, but for now add a
     warning if the source string given to __string() is different than
     the source string given to __assign_str(), as the source to
     __assign_str() isn't even used and will be going away.

   - Added checks to make sure that the source of __string() is also the
     source of __assign_str() so that it can be safely removed in the
     next merge window.

     Included fixes that the above check found.

   - Other minor clean ups and fixes"

* tag 'trace-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
  tracing: Add __string_src() helper to help compilers not to get confused
  tracing: Use strcmp() in __assign_str() WARN_ON() check
  tracepoints: Use WARN() and not WARN_ON() for warnings
  tracing: Use div64_u64() instead of do_div()
  tracing: Support to dump instance traces by ftrace_dump_on_oops
  tracing: Remove second parameter to __assign_rel_str()
  tracing: Add warning if string in __assign_str() does not match __string()
  tracing: Add __string_len() example
  tracing: Remove __assign_str_len()
  ftrace: Fix most kernel-doc warnings
  tracing: Decrement the snapshot if the snapshot trigger fails to register
  tracing: Fix snapshot counter going between two tracers that use it
  tracing: Use EVENT_NULL_STR macro instead of open coding "(null)"
  tracing: Use ? : shortcut in trace macros
  tracing: Do not calculate strlen() twice for __string() fields
  tracing: Rework __assign_str() and __string() to not duplicate getting the string
  cxl/trace: Properly initialize cxl_poison region name
  net: hns3: tracing: fix hclgevf trace event strings
  drm/i915: Add missing ; to __assign_str() macros in tracepoint code
  NFSD: Fix nfsd_clid_class use of __string_len() macro
  ...
tracing: Support to dump instance traces by ftrace_dump_on_oops 2024-03-18T14:33:06+00:00 Huang Yiwei quic_hyiwei@quicinc.com 2024-02-23T08:31:26+00:00 19f0423fd55c301c8edaea286e568ec657f42750 Currently ftrace only dumps the global trace buffer on an OOPs. For debugging a production usecase, instance trace will be helpful to check specific problems since global trace buffer may be used for other purposes. This patch extend the ftrace_dump_on_oops parameter to dump a specific or multiple trace instances: - ftrace_dump_on_oops=0: as before -- don't dump - ftrace_dump_on_oops[=1]: as before -- dump the global trace buffer on all CPUs - ftrace_dump_on_oops=2 or =orig_cpu: as before -- dump the global trace buffer on CPU that triggered the oops - ftrace_dump_on_oops=<instance_name>: new behavior -- dump the tracing instance matching <instance_name> - ftrace_dump_on_oops[=2/orig_cpu],<instance1_name>[=2/orig_cpu], <instrance2_name>[=2/orig_cpu]: new behavior -- dump the global trace buffer and multiple instance buffer on all CPUs, or only dump on CPU that triggered the oops if =2 or =orig_cpu is given Also, the sysctl node can handle the input accordingly. Link: https://lore.kernel.org/linux-trace-kernel/20240223083126.1817731-1-quic_hyiwei@quicinc.com Cc: Ross Zwisler <zwisler@google.com> Cc: <mhiramat@kernel.org> Cc: <mark.rutland@arm.com> Cc: <mcgrof@kernel.org> Cc: <keescook@chromium.org> Cc: <j.granados@samsung.com> Cc: <mathieu.desnoyers@efficios.com> Cc: <corbet@lwn.net> Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> 
Currently ftrace only dumps the global trace buffer on an OOPs. For
debugging a production usecase, instance trace will be helpful to
check specific problems since global trace buffer may be used for
other purposes.

This patch extend the ftrace_dump_on_oops parameter to dump a specific
or multiple trace instances:

  - ftrace_dump_on_oops=0: as before -- don't dump
  - ftrace_dump_on_oops[=1]: as before -- dump the global trace buffer
  on all CPUs
  - ftrace_dump_on_oops=2 or =orig_cpu: as before -- dump the global
  trace buffer on CPU that triggered the oops
  - ftrace_dump_on_oops=<instance_name>: new behavior -- dump the
  tracing instance matching <instance_name>
  - ftrace_dump_on_oops[=2/orig_cpu],<instance1_name>[=2/orig_cpu],
  <instrance2_name>[=2/orig_cpu]: new behavior -- dump the global trace
  buffer and multiple instance buffer on all CPUs, or only dump on CPU
  that triggered the oops if =2 or =orig_cpu is given

Also, the sysctl node can handle the input accordingly.

Link: https://lore.kernel.org/linux-trace-kernel/20240223083126.1817731-1-quic_hyiwei@quicinc.com

Cc: Ross Zwisler <zwisler@google.com>
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <mcgrof@kernel.org>
Cc: <keescook@chromium.org>
Cc: <j.granados@samsung.com>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <corbet@lwn.net>
Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2024-03-15T01:03:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-15T01:03:09+00:00 e5eb28f6d1afebed4bb7d740a797d0390bd3a357 Pull non-MM updates from Andrew Morton: - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. * tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) nilfs2: prevent kernel bug at submit_bh_wbc() nilfs2: fix failure to detect DAT corruption in btree and direct mappings ocfs2: enable ocfs2_listxattr for special files ocfs2: remove SLAB_MEM_SPREAD flag usage assoc_array: fix the return value in assoc_array_insert_mid_shortcut() buildid: use kmap_local_page() watchdog/core: remove sysctl handlers from public header nilfs2: use div64_ul() instead of do_div() mul_u64_u64_div_u64: increase precision by conditionally swapping a and b kexec: copy only happens before uchunk goes to zero get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig get_signal: don't abuse ksig->info.si_signo and ksig->sig const_structs.checkpatch: add device_type Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>" dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace() list: leverage list_is_head() for list_entry_is_head() nilfs2: MAINTAINERS: drop unreachable project mirror site smp: make __smp_processor_id() 0-argument macro fat: fix uninitialized field in nostale filehandles ... 
Pull non-MM updates from Andrew Morton:

 - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
   heap optimizations".

 - Kuan-Wei Chiu has also sped up the library sorting code in the series
   "lib/sort: Optimize the number of swaps and comparisons".

 - Alexey Gladkov has added the ability for code running within an IPC
   namespace to alter its IPC and MQ limits. The series is "Allow to
   change ipc/mq sysctls inside ipc namespace".

 - Geert Uytterhoeven has contributed some dhrystone maintenance work in
   the series "lib: dhry: miscellaneous cleanups".

 - Ryusuke Konishi continues nilfs2 maintenance work in the series

	"nilfs2: eliminate kmap and kmap_atomic calls"
	"nilfs2: fix kernel bug at submit_bh_wbc()"

 - Nathan Chancellor has updated our build tools requirements in the
   series "Bump the minimum supported version of LLVM to 13.0.1".

 - Muhammad Usama Anjum continues with the selftests maintenance work in
   the series "selftests/mm: Improve run_vmtests.sh".

 - Oleg Nesterov has done some maintenance work against the signal code
   in the series "get_signal: minor cleanups and fix".

Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.

* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
  nilfs2: prevent kernel bug at submit_bh_wbc()
  nilfs2: fix failure to detect DAT corruption in btree and direct mappings
  ocfs2: enable ocfs2_listxattr for special files
  ocfs2: remove SLAB_MEM_SPREAD flag usage
  assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
  buildid: use kmap_local_page()
  watchdog/core: remove sysctl handlers from public header
  nilfs2: use div64_ul() instead of do_div()
  mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
  kexec: copy only happens before uchunk goes to zero
  get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
  get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
  get_signal: don't abuse ksig->info.si_signo and ksig->sig
  const_structs.checkpatch: add device_type
  Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
  dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
  list: leverage list_is_head() for list_entry_is_head()
  nilfs2: MAINTAINERS: drop unreachable project mirror site
  smp: make __smp_processor_id() 0-argument macro
  fat: fix uninitialized field in nostale filehandles
  ...
Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel 2024-03-14T01:34:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-14T01:34:05+00:00 480e035fc4c714fb5536e64ab9db04fedc89e910 Pull drm updates from Dave Airlie: "Highlights are usual, more AMD IP blocks for future hw, i915/xe changes, Displayport tunnelling support for i915, msm YUV over DP changes, new tests for ttm, but its mostly a lot of stuff all over the place from lots of people. core: - EDID cleanups - scheduler error handling fixes - managed: add drmm_release_action() with tests - add ratelimited drm debug print - DPCD PSR early transport macro - DP tunneling and bandwidth allocation helpers - remove built-in edids - dp: Avoid AUX transfers on powered-down displays - dp: Add VSC SDP helpers cross drivers: - use new drm print helpers - switch to ->read_edid callback - gem: add stats for shared buffers plus updates to amdgpu, i915, xe syncobj: - fixes to waiting and sleeping ttm: - add tests - fix errno codes - simply busy-placement handling - fix page decryption media: - tc358743: fix v4l device registration video: - move all kernel parameters for video behind CONFIG_VIDEO sound: - remove <drm/drm_edid.h> include from header ci: - add tests for msm - fix apq8016 runner efifb: - use copy of global screen_info state vesafb: - use copy of global screen_info state simplefb: - fix logging bridge: - ite-6505: fix DP link-training bug - samsung-dsim: fix error checking in probe - samsung-dsim: add bsh-smm-s2/pro boards - tc358767: fix regmap usage - imx: add i.MX8MP HDMI PVI plus DT bindings - imx: add i.MX8MP HDMI TX plus DT bindings - sii902x: fix probing and unregistration - tc358767: limit pixel PLL input range - switch to new drm_bridge_read_edid() interface panel: - ltk050h3146w: error-handling fixes - panel-edp: support delay between power-on and enable; use put_sync in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings - add BOE TH101MB31IG002-28A plus DT bindings - add EDT ETML1010G3DRA plus DT bindings - add Novatek NT36672E LCD DSI plus DT bindings - nt36523: support 120Hz timings, fix includes - simple: fix display timings on RK32FN48H - visionox-vtdr6130: fix initialization - add Powkiddy RGB10MAX3 plus DT bindings - st7703: support panel rotation plus DT bindings - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs panel-orientation-quirks: - GPD Win Mini amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - ATHUB 4.1 support - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - DCN 3.5.1 support - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates and enhancements - Fix cache size reporting - Relocate the trap handler radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups xe: - new query for GuC submission version - Remove unused persistent exec_queues - Add vram frequency sysfs attributes - Add the flag XE_VM_BIND_FLAG_DUMPABLE - Drop pre-production workarounds - Drop kunit tests for unsupported platforms - Start pumbling SR-IOV support with memory based interrupts for VF - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts - Add GuC Doorbells Manager as prep work SR-IOV - Implement additional workarounds for xe2 and MTL - Program a few registers according to perfomance guide spec for Xe2 - Fix remaining 32b build issues and enable it back - Fix build with CONFIG_DEBUG_FS=n - Fix warnings from GuC ABI headers - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF - Release mmap mappings on rpm suspend - Disable mid-thread preemption when not properly supported by hardware - Fix xe_exec by reserving extra fence slot for CPU bind - Fix xe_exec with full long running exec queue - Canonicalize addresses where needed for Xe2 and add to devcoredum - Toggle USM support for Xe2 - Only allow 1 ufence per exec / bind IOCTL - Add GuC firmware loading for Lunar Lake - Add XE_VMA_PTE_64K VMA flag i915: - Add more ADL-N PCI IDs - Enable fastboot also on older platforms - Early transport for panel replay and PSR - New ARL PCI IDs - DP TPS4 PHY test pattern support - Unify and improve VSC SDP for PSR and non-PSR cases - Refactor memory regions and improve debug logging - Rework global state serialization - Remove unused CDCLK divider fields - Unify HDCP connector logging format - Use display instead of graphics version in display code - Move VBT and opregion debugfs next to the implementation - Abstract opregion interface, use opaque type - MTL fixes - HPD handling fixes - Add GuC submission interface version query - Atomically invalidate userptr on mmu-notifier - Update handling of MMIO triggered reports - Don't make assumptions about intel_wakeref_t type - Extend driver code of Xe_LPG to Xe_LPG+ - Add flex arrays to struct i915_syncmap - Allow for very slow HuC loading - DP tunneling and bandwidth allocation support msm: - Correct bindings for MSM8976 and SM8650 platforms - Start migration of MDP5 platforms to DPU driver - X1E80100 MDSS support - DPU: - Improve DSC allocation, fixing several important corner cases - Add support for SDM630/SDM660 platforms - Simplify dpu_encoder_phys_ops - Apply fixes targeting DSC support with a single DSC encoder - Apply fixes for HCTL_EN timing configuration - X1E80100 support - Add support for YUV420 over DP - GPU: - fix sc7180 UBWC config - fix a7xx LLC config - new gpu support: a305B, a750, a702 - machine support: SM7150 (different power levels than other a618) - a7xx devcoredump support habanalabs: - configure IRQ affinity according to NUMA node - move HBM MMU page tables inside the HBM - improve device reset - check extended PCIe errors ivpu: - updates to firmware API - refactor BO allocation imx: - use devm_ functions during init hisilicon: - fix EDID includes mgag200: - improve ioremap usage - convert to struct drm_edid - Work around PCI write bursts nouveau: - disp: use kmemdup() - fix EDID includes - documentation fixes qaic: - fixes to BO handling - make use of DRM managed release - fix order of remove operations rockchip: - analogix_dp: get encoder port from DT - inno_hdmi: support HDMI for RK3128 - lvds: error-handling fixes ssd130x: - support SSD133x plus DT bindings tegra: - fix error handling tilcdc: - make use of DRM managed release v3d: - show memory stats in debugfs - Support display MMU page size vc4: - fix error handling in plane prepare_fb - fix framebuffer test in plane helpers virtio: - add venus capset defines vkms: - fix OOB access when programming the LUT - Kconfig improvements vmwgfx: - unmap surface before changing plane state - fix memory leak in error handling - documentation fixes - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid - fix null-pointer deref in execbuf - refactor display-mode probing - fix fencing for creating cursor MOBs - fix cursor-memory lifetime xlnx: - fix live video input for ZynqMP DPSUB lima: - fix memory leak loongson: - fail if no VRAM present meson: - switch to new drm_bridge_read_edid() interface renesas: - add RZ/G2L DU support plus DT bindings mxsfb: - Use managed mode config sun4i: - HDMI: updates to atomic mode setting mediatek: - Add display driver for MT8188 VDOSYS1 - DSI driver cleanups - Filter modes according to hardware capability - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip etnaviv: - enhancements for NPU and MRT support" * tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits) drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo drm/amd/pm: wait for completion of the EnableGfxImu message drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1 drm/amdgpu: add smu 14.0.1 support drm/amdgpu: add VPE 6.1.1 discovery support drm/amdgpu/vpe: add VPE 6.1.1 support drm/amdgpu/vpe: don't emit cond exec command under collaborate mode drm/amdgpu/vpe: add collaborate mode support for VPE drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE drm/amdgpu/vpe: add multi instance VPE support drm/amdgpu/discovery: add nbif v6_3_1 ip block drm/amdgpu: Add nbif v6_3_1 ip block support drm/amdgpu: Add pcie v6_1_0 ip headers (v5) drm/amdgpu: Add nbif v6_3_1 ip headers (v5) arch/powerpc: Remove <linux/fb.h> from backlight code macintosh/via-pmu-backlight: Include <linux/backlight.h> fbdev/chipsfb: Include <linux/backlight.h> drm/etnaviv: Restore some id values drm/amdkfd: make kfd_class constant drm/amdgpu: add ring timeout information in devcoredump ... 
Pull drm updates from Dave Airlie:
 "Highlights are usual, more AMD IP blocks for future hw, i915/xe
  changes, Displayport tunnelling support for i915, msm YUV over DP
  changes, new tests for ttm, but its mostly a lot of stuff all over the
  place from lots of people.

  core:
   - EDID cleanups
   - scheduler error handling fixes
   - managed: add drmm_release_action() with tests
   - add ratelimited drm debug print
   - DPCD PSR early transport macro
   - DP tunneling and bandwidth allocation helpers
   - remove built-in edids
   - dp: Avoid AUX transfers on powered-down displays
   - dp: Add VSC SDP helpers

  cross drivers:
   - use new drm print helpers
   - switch to ->read_edid callback
   - gem: add stats for shared buffers plus updates to amdgpu, i915, xe

  syncobj:
   - fixes to waiting and sleeping

  ttm:
   - add tests
   - fix errno codes
   - simply busy-placement handling
   - fix page decryption

  media:
   - tc358743: fix v4l device registration

  video:
   - move all kernel parameters for video behind CONFIG_VIDEO

  sound:
   - remove <drm/drm_edid.h> include from header

  ci:
   - add tests for msm
   - fix apq8016 runner

  efifb:
   - use copy of global screen_info state

  vesafb:
   - use copy of global screen_info state

  simplefb:
   - fix logging

  bridge:
   - ite-6505: fix DP link-training bug
   - samsung-dsim: fix error checking in probe
   - samsung-dsim: add bsh-smm-s2/pro boards
   - tc358767: fix regmap usage
   - imx: add i.MX8MP HDMI PVI plus DT bindings
   - imx: add i.MX8MP HDMI TX plus DT bindings
   - sii902x: fix probing and unregistration
   - tc358767: limit pixel PLL input range
   - switch to new drm_bridge_read_edid() interface

  panel:
   - ltk050h3146w: error-handling fixes
   - panel-edp: support delay between power-on and enable; use put_sync
     in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
     V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
   - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
   - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
   - add BOE TH101MB31IG002-28A plus DT bindings
   - add EDT ETML1010G3DRA plus DT bindings
   - add Novatek NT36672E LCD DSI plus DT bindings
   - nt36523: support 120Hz timings, fix includes
   - simple: fix display timings on RK32FN48H
   - visionox-vtdr6130: fix initialization
   - add Powkiddy RGB10MAX3 plus DT bindings
   - st7703: support panel rotation plus DT bindings
   - add Himax HX83112A plus DT bindings
   - ltk500hd1829: add support for ltk101b4029w and admatec 9904370
   - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs

  panel-orientation-quirks:
   - GPD Win Mini

  amdgpu:
   - Validate DMABuf imports in compute VMs
   - Add RAS ACA framework
   - PSP 13 fixes
   - Misc code cleanups
   - Replay fixes
   - Atom interpretor PS, WS bounds checking
   - DML2 fixes
   - Audio fixes
   - DCN 3.5 Z state fixes
   - Remove deprecated ida_simple usage
   - UBSAN fixes
   - RAS fixes
   - Enable seq64 infrastructure
   - DC color block enablement
   - Documentation updates
   - DC documentation updates
   - DMCUB updates
   - ATHUB 4.1 support
   - LSDMA 7.0 support
   - JPEG DPG support
   - IH 7.0 support
   - HDP 7.0 support
   - VCN 5.0 support
   - SMU 13.0.6 updates
   - NBIO 7.11 updates
   - SDMA 6.1 updates
   - MMHUB 3.3 updates
   - DCN 3.5.1 support
   - NBIF 6.3.1 support
   - VPE 6.1.1 support

  amdkfd:
   - Validate DMABuf imports in compute VMs
   - SVM fixes
   - Trap handler updates and enhancements
   - Fix cache size reporting
   - Relocate the trap handler

  radeon:
   - Atom interpretor PS, WS bounds checking
   - Misc code cleanups

  xe:
   - new query for GuC submission version
   - Remove unused persistent exec_queues
   - Add vram frequency sysfs attributes
   - Add the flag XE_VM_BIND_FLAG_DUMPABLE
   - Drop pre-production workarounds
   - Drop kunit tests for unsupported platforms
   - Start pumbling SR-IOV support with memory based interrupts for VF
   - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
     to work with memory based interrupts
   - Add GuC Doorbells Manager as prep work SR-IOV
   - Implement additional workarounds for xe2 and MTL
   - Program a few registers according to perfomance guide spec for Xe2
   - Fix remaining 32b build issues and enable it back
   - Fix build with CONFIG_DEBUG_FS=n
   - Fix warnings from GuC ABI headers
   - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
   - Release mmap mappings on rpm suspend
   - Disable mid-thread preemption when not properly supported by
     hardware
   - Fix xe_exec by reserving extra fence slot for CPU bind
   - Fix xe_exec with full long running exec queue
   - Canonicalize addresses where needed for Xe2 and add to devcoredum
   - Toggle USM support for Xe2
   - Only allow 1 ufence per exec / bind IOCTL
   - Add GuC firmware loading for Lunar Lake
   - Add XE_VMA_PTE_64K VMA flag

  i915:
   - Add more ADL-N PCI IDs
   - Enable fastboot also on older platforms
   - Early transport for panel replay and PSR
   - New ARL PCI IDs
   - DP TPS4 PHY test pattern support
   - Unify and improve VSC SDP for PSR and non-PSR cases
   - Refactor memory regions and improve debug logging
   - Rework global state serialization
   - Remove unused CDCLK divider fields
   - Unify HDCP connector logging format
   - Use display instead of graphics version in display code
   - Move VBT and opregion debugfs next to the implementation
   - Abstract opregion interface, use opaque type
   - MTL fixes
   - HPD handling fixes
   - Add GuC submission interface version query
   - Atomically invalidate userptr on mmu-notifier
   - Update handling of MMIO triggered reports
   - Don't make assumptions about intel_wakeref_t type
   - Extend driver code of Xe_LPG to Xe_LPG+
   - Add flex arrays to struct i915_syncmap
   - Allow for very slow HuC loading
   - DP tunneling and bandwidth allocation support

  msm:
   - Correct bindings for MSM8976 and SM8650 platforms
   - Start migration of MDP5 platforms to DPU driver
   - X1E80100 MDSS support
   - DPU:
      - Improve DSC allocation, fixing several important corner cases
      - Add support for SDM630/SDM660 platforms
      - Simplify dpu_encoder_phys_ops
      - Apply fixes targeting DSC support with a single DSC encoder
      - Apply fixes for HCTL_EN timing configuration
      - X1E80100 support
      - Add support for YUV420 over DP
   - GPU:
      - fix sc7180 UBWC config
      - fix a7xx LLC config
      - new gpu support: a305B, a750, a702
      - machine support: SM7150 (different power levels than other a618)
      - a7xx devcoredump support

  habanalabs:
   - configure IRQ affinity according to NUMA node
   - move HBM MMU page tables inside the HBM
   - improve device reset
   - check extended PCIe errors

  ivpu:
   - updates to firmware API
   - refactor BO allocation

  imx:
   - use devm_ functions during init

  hisilicon:
   - fix EDID includes

  mgag200:
   - improve ioremap usage
   - convert to struct drm_edid
   - Work around PCI write bursts

  nouveau:
   - disp: use kmemdup()
   - fix EDID includes
   - documentation fixes

  qaic:
   - fixes to BO handling
   - make use of DRM managed release
   - fix order of remove operations

  rockchip:
   - analogix_dp: get encoder port from DT
   - inno_hdmi: support HDMI for RK3128
   - lvds: error-handling fixes

  ssd130x:
   - support SSD133x plus DT bindings

  tegra:
   - fix error handling

  tilcdc:
   - make use of DRM managed release

  v3d:
   - show memory stats in debugfs
   - Support display MMU page size

  vc4:
   - fix error handling in plane prepare_fb
   - fix framebuffer test in plane helpers

  virtio:
   - add venus capset defines

  vkms:
   - fix OOB access when programming the LUT
   - Kconfig improvements

  vmwgfx:
   - unmap surface before changing plane state
   - fix memory leak in error handling
   - documentation fixes
   - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
   - fix null-pointer deref in execbuf
   - refactor display-mode probing
   - fix fencing for creating cursor MOBs
   - fix cursor-memory lifetime

  xlnx:
   - fix live video input for ZynqMP DPSUB

  lima:
   - fix memory leak

  loongson:
   - fail if no VRAM present

  meson:
   - switch to new drm_bridge_read_edid() interface

  renesas:
   - add RZ/G2L DU support plus DT bindings

  mxsfb:
   - Use managed mode config

  sun4i:
   - HDMI: updates to atomic mode setting

  mediatek:
   - Add display driver for MT8188 VDOSYS1
   - DSI driver cleanups
   - Filter modes according to hardware capability
   - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip

  etnaviv:
   - enhancements for NPU and MRT support"

* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
  drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
  drm/amd/pm: wait for completion of the EnableGfxImu message
  drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
  drm/amdgpu: add smu 14.0.1 support
  drm/amdgpu: add VPE 6.1.1 discovery support
  drm/amdgpu/vpe: add VPE 6.1.1 support
  drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
  drm/amdgpu/vpe: add collaborate mode support for VPE
  drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
  drm/amdgpu/vpe: add multi instance VPE support
  drm/amdgpu/discovery: add nbif v6_3_1 ip block
  drm/amdgpu: Add nbif v6_3_1 ip block support
  drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
  drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
  arch/powerpc: Remove <linux/fb.h> from backlight code
  macintosh/via-pmu-backlight: Include <linux/backlight.h>
  fbdev/chipsfb: Include <linux/backlight.h>
  drm/etnaviv: Restore some id values
  drm/amdkfd: make kfd_class constant
  drm/amdgpu: add ring timeout information in devcoredump
  ...
Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2024-03-13T18:40:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-13T18:40:06+00:00 07abb19a9b201c11e4367e8a428be7235b6dbd0d Pull power management updates from Rafael Wysocki: "From the functional perspective, the most significant change here is the addition of support for Energy Models that can be updated dynamically at run time. There is also the addition of LZ4 compression support for hibernation, the new preferred core support in amd-pstate, new platforms support in the Intel RAPL driver, new model-specific EPP handling in intel_pstate and more. Apart from that, the cpufreq default transition delay is reduced from 10 ms to 2 ms (along with some related adjustments), the system suspend statistics code undergoes a significant rework and there is a usual bunch of fixes and code cleanups all over. Specifics: - Allow the Energy Model to be updated dynamically (Lukasz Luba) - Add support for LZ4 compression algorithm to the hibernation image creation and loading code (Nikhil V) - Fix and clean up system suspend statistics collection (Rafael Wysocki) - Simplify device suspend and resume handling in the power management core code (Rafael Wysocki) - Fix PCI hibernation support description (Yiwei Lin) - Make hibernation take set_memory_ro() return values into account as appropriate (Christophe Leroy) - Set mem_sleep_current during kernel command line setup to avoid an ordering issue with handling it (Maulik Shah) - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a driver's system suspend callback (Qingliang Li) - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus) - Add a tracepoint for runtime_status changes tracking (Vilas Bhat) - Fix section title markdown in the runtime PM documentation (Yiwei Lin) - Enable preferred core support in the amd-pstate cpufreq driver (Meng Li) - Fix min_perf assignment in amd_pstate_adjust_perf() and make the min/max limit perf values in amd-pstate always stay within the (highest perf, lowest perf) range (Tor Vic, Meng Li) - Allow intel_pstate to assign model-specific values to strings used in the EPP sysfs interface and make it do so on Meteor Lake (Srinivas Pandruvada) - Drop long-unused cpudata::prev_cummulative_iowait from the intel_pstate cpufreq driver (Jiri Slaby) - Prevent scaling_cur_freq from exceeding scaling_max_freq when the latter is an inefficient frequency (Shivnandan Kumar) - Change default transition delay in cpufreq to 2ms (Qais Yousef) - Remove references to 10ms minimum sampling rate from comments in the cpufreq code (Pierre Gondois) - Honour transition_latency over transition_delay_us in cpufreq (Qais Yousef) - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar) - General enhancements / cleanups to ARM cpufreq drivers (tianyu2, Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia Belova) - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan) - Make the SCMI cpufreq driver get a transition delay value from firmware (Pierre Gondois) - Prevent the haltpoll cpuidle governor from shrinking guest poll_limit_ns below grow_start (Parshuram Sangle) - Avoid potential overflow in integer multiplication when computing cpuidle state parameters (C Cheng) - Adjust MWAIT hint target C-state computation in the ACPI cpuidle driver and in intel_idle to return a correct value for C0 (He Rongguang) - Address multiple issues in the TPMI RAPL driver and add support for new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui) - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel Lezcano) - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li) - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth Norway Ananda) - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil) - Fix a couple of warnings in the OPP core code related to W=1 builds (Viresh Kumar) - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh Kumar) - Extend dev_pm_opp_data with turbo support (Sibi Sankar) - dt-bindings: drop maxItems from inner items (David Heidelberg)" * tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits) dt-bindings: opp: drop maxItems from inner items OPP: debugfs: Fix warning around icc_get_name() OPP: debugfs: Fix warning with W=1 builds cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h OPP: Extend dev_pm_opp_data with turbo support Fix cpupower-frequency-info.1 man page typo cpufreq: scmi: Set transition_delay_us firmware: arm_scmi: Populate fast channel rate_limit firmware: arm_scmi: Populate perf commands rate_limit cpuidle: ACPI/intel: fix MWAIT hint target C-state computation PM: sleep: wakeirq: fix wake irq warning in system suspend powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function cpufreq: Don't unregister cpufreq cooling on CPU hotplug PM: suspend: Set mem_sleep_current during kernel command line setup cpufreq: Honour transition_latency over transition_delay_us cpufreq: Limit resolving a frequency to policy min/max Documentation: PM: Fix runtime_pm.rst markdown syntax cpufreq: amd-pstate: adjust min/max limit perf cpufreq: Remove references to 10ms min sampling rate cpufreq: intel_pstate: Update default EPPs for Meteor Lake ... 
Pull power management updates from Rafael Wysocki:
 "From the functional perspective, the most significant change here is
  the addition of support for Energy Models that can be updated
  dynamically at run time.

  There is also the addition of LZ4 compression support for hibernation,
  the new preferred core support in amd-pstate, new platforms support in
  the Intel RAPL driver, new model-specific EPP handling in intel_pstate
  and more.

  Apart from that, the cpufreq default transition delay is reduced from
  10 ms to 2 ms (along with some related adjustments), the system
  suspend statistics code undergoes a significant rework and there is a
  usual bunch of fixes and code cleanups all over.

  Specifics:

   - Allow the Energy Model to be updated dynamically (Lukasz Luba)

   - Add support for LZ4 compression algorithm to the hibernation image
     creation and loading code (Nikhil V)

   - Fix and clean up system suspend statistics collection (Rafael
     Wysocki)

   - Simplify device suspend and resume handling in the power management
     core code (Rafael Wysocki)

   - Fix PCI hibernation support description (Yiwei Lin)

   - Make hibernation take set_memory_ro() return values into account as
     appropriate (Christophe Leroy)

   - Set mem_sleep_current during kernel command line setup to avoid an
     ordering issue with handling it (Maulik Shah)

   - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
     driver's system suspend callback (Qingliang Li)

   - Simplify pm_runtime_get_if_active() usage and add a replacement for
     pm_runtime_put_autosuspend() (Sakari Ailus)

   - Add a tracepoint for runtime_status changes tracking (Vilas Bhat)

   - Fix section title markdown in the runtime PM documentation (Yiwei
     Lin)

   - Enable preferred core support in the amd-pstate cpufreq driver
     (Meng Li)

   - Fix min_perf assignment in amd_pstate_adjust_perf() and make the
     min/max limit perf values in amd-pstate always stay within the
     (highest perf, lowest perf) range (Tor Vic, Meng Li)

   - Allow intel_pstate to assign model-specific values to strings used
     in the EPP sysfs interface and make it do so on Meteor Lake
     (Srinivas Pandruvada)

   - Drop long-unused cpudata::prev_cummulative_iowait from the
     intel_pstate cpufreq driver (Jiri Slaby)

   - Prevent scaling_cur_freq from exceeding scaling_max_freq when the
     latter is an inefficient frequency (Shivnandan Kumar)

   - Change default transition delay in cpufreq to 2ms (Qais Yousef)

   - Remove references to 10ms minimum sampling rate from comments in
     the cpufreq code (Pierre Gondois)

   - Honour transition_latency over transition_delay_us in cpufreq (Qais
     Yousef)

   - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)

   - General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
     Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
     Belova)

   - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)

   - Make the SCMI cpufreq driver get a transition delay value from
     firmware (Pierre Gondois)

   - Prevent the haltpoll cpuidle governor from shrinking guest
     poll_limit_ns below grow_start (Parshuram Sangle)

   - Avoid potential overflow in integer multiplication when computing
     cpuidle state parameters (C Cheng)

   - Adjust MWAIT hint target C-state computation in the ACPI cpuidle
     driver and in intel_idle to return a correct value for C0 (He
     Rongguang)

   - Address multiple issues in the TPMI RAPL driver and add support for
     new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)

   - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
     Lezcano)

   - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)

   - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
     Norway Ananda)

   - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)

   - Fix a couple of warnings in the OPP core code related to W=1 builds
     (Viresh Kumar)

   - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
     Kumar)

   - Extend dev_pm_opp_data with turbo support (Sibi Sankar)

   - dt-bindings: drop maxItems from inner items (David Heidelberg)"

* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
  dt-bindings: opp: drop maxItems from inner items
  OPP: debugfs: Fix warning around icc_get_name()
  OPP: debugfs: Fix warning with W=1 builds
  cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
  OPP: Extend dev_pm_opp_data with turbo support
  Fix cpupower-frequency-info.1 man page typo
  cpufreq: scmi: Set transition_delay_us
  firmware: arm_scmi: Populate fast channel rate_limit
  firmware: arm_scmi: Populate perf commands rate_limit
  cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
  PM: sleep: wakeirq: fix wake irq warning in system suspend
  powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
  cpufreq: Don't unregister cpufreq cooling on CPU hotplug
  PM: suspend: Set mem_sleep_current during kernel command line setup
  cpufreq: Honour transition_latency over transition_delay_us
  cpufreq: Limit resolving a frequency to policy min/max
  Documentation: PM: Fix runtime_pm.rst markdown syntax
  cpufreq: amd-pstate: adjust min/max limit perf
  cpufreq: Remove references to 10ms min sampling rate
  cpufreq: intel_pstate: Update default EPPs for Meteor Lake
  ...
Merge tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab 2024-03-13T03:14:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-13T03:14:54+00:00 0ea680eda6c9f59a9512f8b0dd4abf229bb9f6cf Pull slab updates from Vlastimil Babka: - Freelist loading optimization (Chengming Zhou) When the per-cpu slab is depleted and a new one loaded from the cpu partial list, optimize the loading to avoid an irq enable/disable cycle. This results in a 3.5% performance improvement on the "perf bench sched messaging" test. - Kernel boot parameters cleanup after SLAB removal (Xiongwei Song) Due to two different main slab implementations we've had boot parameters prefixed either slab_ and slub_ with some later becoming an alias as both implementations gained the same functionality (i.e. slab_nomerge vs slub_nomerge). In order to eventually get rid of the implementation-specific names, the canonical and documented parameters are now all prefixed slab_ and the slub_ variants become deprecated but still working aliases. - SLAB_ kmem_cache creation flags cleanup (Vlastimil Babka) The flags had hardcoded #define values which became tedious and error-prone when adding new ones. Assign the values via an enum that takes care of providing unique bit numbers. Also deprecate SLAB_MEM_SPREAD which was only used by SLAB, so it's a no-op since SLAB removal. Assign it an explicit zero value. The removals of the flag usage are handled independently in the respective subsystems, with a final removal of any leftover usage planned for the next release. - Misc cleanups and fixes (Chengming Zhou, Xiaolei Wang, Zheng Yejian) Includes removal of unused code or function parameters and a fix of a memleak. * tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: slab: remove PARTIAL_NODE slab_state mm, slab: remove memcg_from_slab_obj() mm, slab: remove the corner case of inc_slabs_node() mm/slab: Fix a kmemleak in kmem_cache_destroy() mm, slab, kasan: replace kasan_never_merge() with SLAB_NO_MERGE mm, slab: use an enum to define SLAB_ cache creation flags mm, slab: deprecate SLAB_MEM_SPREAD flag mm, slab: fix the comment of cpu partial list mm, slab: remove unused object_size parameter in kmem_cache_flags() mm/slub: remove parameter 'flags' in create_kmalloc_caches() mm/slub: remove unused parameter in next_freelist_entry() mm/slub: remove full list manipulation for non-debug slab mm/slub: directly load freelist from cpu partial slab in the likely case mm/slub: make the description of slab_min_objects helpful in doc mm/slub: replace slub_$params with slab_$params in slub.rst mm/slub: unify all sl[au]b parameters with "slab_$param" Documentation: kernel-parameters: remove noaliencache 
Pull slab updates from Vlastimil Babka:

 - Freelist loading optimization (Chengming Zhou)

   When the per-cpu slab is depleted and a new one loaded from the cpu
   partial list, optimize the loading to avoid an irq enable/disable
   cycle. This results in a 3.5% performance improvement on the "perf
   bench sched messaging" test.

 - Kernel boot parameters cleanup after SLAB removal (Xiongwei Song)

   Due to two different main slab implementations we've had boot
   parameters prefixed either slab_ and slub_ with some later becoming
   an alias as both implementations gained the same functionality (i.e.
   slab_nomerge vs slub_nomerge). In order to eventually get rid of the
   implementation-specific names, the canonical and documented
   parameters are now all prefixed slab_ and the slub_ variants become
   deprecated but still working aliases.

 - SLAB_ kmem_cache creation flags cleanup (Vlastimil Babka)

   The flags had hardcoded #define values which became tedious and
   error-prone when adding new ones. Assign the values via an enum that
   takes care of providing unique bit numbers. Also deprecate
   SLAB_MEM_SPREAD which was only used by SLAB, so it's a no-op since
   SLAB removal. Assign it an explicit zero value. The removals of the
   flag usage are handled independently in the respective subsystems,
   with a final removal of any leftover usage planned for the next
   release.

 - Misc cleanups and fixes (Chengming Zhou, Xiaolei Wang, Zheng Yejian)

   Includes removal of unused code or function parameters and a fix of a
   memleak.

* tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  slab: remove PARTIAL_NODE slab_state
  mm, slab: remove memcg_from_slab_obj()
  mm, slab: remove the corner case of inc_slabs_node()
  mm/slab: Fix a kmemleak in kmem_cache_destroy()
  mm, slab, kasan: replace kasan_never_merge() with SLAB_NO_MERGE
  mm, slab: use an enum to define SLAB_ cache creation flags
  mm, slab: deprecate SLAB_MEM_SPREAD flag
  mm, slab: fix the comment of cpu partial list
  mm, slab: remove unused object_size parameter in kmem_cache_flags()
  mm/slub: remove parameter 'flags' in create_kmalloc_caches()
  mm/slub: remove unused parameter in next_freelist_entry()
  mm/slub: remove full list manipulation for non-debug slab
  mm/slub: directly load freelist from cpu partial slab in the likely case
  mm/slub: make the description of slab_min_objects helpful in doc
  mm/slub: replace slub_$params with slab_$params in slub.rst
  mm/slub: unify all sl[au]b parameters with "slab_$param"
  Documentation: kernel-parameters: remove noaliencache
Merge tag 'docs-6.9' of git://git.lwn.net/linux 2024-03-12T22:18:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-12T22:18:34+00:00 1f440397665f4241346e4cc6d93f8b73880815d1 Pull documentation updates from Jonathan Corbet: "A moderatly busy cycle for development this time around. - Some cleanup of the main index page for easier navigation - Rework some of the other top-level pages for better readability and, with luck, fewer merge conflicts in the future. - Submit-checklist improvements, hopefully the first of many. - New Italian translations - A fair number of kernel-doc fixes and improvements. We have also dropped the recommendation to use an old version of Sphinx. - A new document from Thorsten on bisection ... and lots of fixes and updates" * tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits) docs: verify/bisect: fixes, finetuning, and support for Arch docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst docs: submit-checklist: use subheadings docs: submit-checklist: structure by category docs: new text on bisecting which also covers bug validation docs: drop the version constraints for sphinx and dependencies docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4 docs: Restore "smart quotes" for quotes docs/zh_CN: accurate translation of "function" docs: Include simplified link titles in main index docs: Correct formatting of title in admin-guide/index.rst docs: kernel_feat.py: fix build error for missing files MAINTAINERS: Set the field name for subsystem profile section kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO Fixed case issue with 'fault-injection' in documentation kernel-doc: handle #if in enums as well Documentation: update mailing list addresses doc: kerneldoc.py: fix indentation scripts/kernel-doc: simplify signature printing ... 
Pull documentation updates from Jonathan Corbet:
 "A moderatly busy cycle for development this time around.

   - Some cleanup of the main index page for easier navigation

   - Rework some of the other top-level pages for better readability
     and, with luck, fewer merge conflicts in the future.

   - Submit-checklist improvements, hopefully the first of many.

   - New Italian translations

   - A fair number of kernel-doc fixes and improvements. We have also
     dropped the recommendation to use an old version of Sphinx.

   - A new document from Thorsten on bisection

  ... and lots of fixes and updates"

* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
  docs: verify/bisect: fixes, finetuning, and support for Arch
  docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
  docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
  docs: submit-checklist: use subheadings
  docs: submit-checklist: structure by category
  docs: new text on bisecting which also covers bug validation
  docs: drop the version constraints for sphinx and dependencies
  docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
  docs: Restore "smart quotes" for quotes
  docs/zh_CN: accurate translation of "function"
  docs: Include simplified link titles in main index
  docs: Correct formatting of title in admin-guide/index.rst
  docs: kernel_feat.py: fix build error for missing files
  MAINTAINERS: Set the field name for subsystem profile section
  kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
  Fixed case issue with 'fault-injection' in documentation
  kernel-doc: handle #if in enums as well
  Documentation: update mailing list addresses
  doc: kerneldoc.py: fix indentation
  scripts/kernel-doc: simplify signature printing
  ...
Merge tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2024-03-12T16:31:39+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-12T16:31:39+00:00 0e33cf955f07e3991e45109cb3e29fbc9ca51d06 Pull x86 RFDS mitigation from Dave Hansen: "RFDS is a CPU vulnerability that may allow a malicious userspace to infer stale register values from kernel space. Kernel registers can have all kinds of secrets in them so the mitigation is basically to wait until the kernel is about to return to userspace and has user values in the registers. At that point there is little chance of kernel secrets ending up in the registers and the microarchitectural state can be cleared. This leverages some recent robustness fixes for the existing MDS vulnerability. Both MDS and RFDS use the VERW instruction for mitigation" * tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests x86/rfds: Mitigate Register File Data Sampling (RFDS) Documentation/hw-vuln: Add documentation for RFDS x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set 
Pull x86 RFDS mitigation from Dave Hansen:
 "RFDS is a CPU vulnerability that may allow a malicious userspace to
  infer stale register values from kernel space. Kernel registers can
  have all kinds of secrets in them so the mitigation is basically to
  wait until the kernel is about to return to userspace and has user
  values in the registers. At that point there is little chance of
  kernel secrets ending up in the registers and the microarchitectural
  state can be cleared.

  This leverages some recent robustness fixes for the existing MDS
  vulnerability. Both MDS and RFDS use the VERW instruction for
  mitigation"

* tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests
  x86/rfds: Mitigate Register File Data Sampling (RFDS)
  Documentation/hw-vuln: Add documentation for RFDS
  x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2024-03-12T02:53:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-12T02:53:15+00:00 685d98211273f60e38a6d361b62d7016c545297e Pull core x86 updates from Ingo Molnar: - The biggest change is the rework of the percpu code, to support the 'Named Address Spaces' GCC feature, by Uros Bizjak: - This allows C code to access GS and FS segment relative memory via variables declared with such attributes, which allows the compiler to better optimize those accesses than the previous inline assembly code. - The series also includes a number of micro-optimizations for various percpu access methods, plus a number of cleanups of %gs accesses in assembly code. - These changes have been exposed to linux-next testing for the last ~5 months, with no known regressions in this area. - Fix/clean up __switch_to()'s broken but accidentally working handling of FPU switching - which also generates better code - Propagate more RIP-relative addressing in assembly code, to generate slightly better code - Rework the CPU mitigations Kconfig space to be less idiosyncratic, to make it easier for distros to follow & maintain these options - Rework the x86 idle code to cure RCU violations and to clean up the logic - Clean up the vDSO Makefile logic - Misc cleanups and fixes * tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) x86/idle: Select idle routine only once x86/idle: Let prefer_mwait_c1_over_halt() return bool x86/idle: Cleanup idle_setup() x86/idle: Clean up idle selection x86/idle: Sanitize X86_BUG_AMD_E400 handling sched/idle: Conditionally handle tick broadcast in default_idle_call() x86: Increase brk randomness entropy for 64-bit systems x86/vdso: Move vDSO to mmap region x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o x86/retpoline: Ensure default return thunk isn't used at runtime x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32 x86/vdso: Use $(addprefix ) instead of $(foreach ) x86/vdso: Simplify obj-y addition x86/vdso: Consolidate targets and clean-files x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS ... 
Pull core x86 updates from Ingo Molnar:

 - The biggest change is the rework of the percpu code, to support the
   'Named Address Spaces' GCC feature, by Uros Bizjak:

      - This allows C code to access GS and FS segment relative memory
        via variables declared with such attributes, which allows the
        compiler to better optimize those accesses than the previous
        inline assembly code.

      - The series also includes a number of micro-optimizations for
        various percpu access methods, plus a number of cleanups of %gs
        accesses in assembly code.

      - These changes have been exposed to linux-next testing for the
        last ~5 months, with no known regressions in this area.

 - Fix/clean up __switch_to()'s broken but accidentally working handling
   of FPU switching - which also generates better code

 - Propagate more RIP-relative addressing in assembly code, to generate
   slightly better code

 - Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
   make it easier for distros to follow & maintain these options

 - Rework the x86 idle code to cure RCU violations and to clean up the
   logic

 - Clean up the vDSO Makefile logic

 - Misc cleanups and fixes

* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  x86/idle: Select idle routine only once
  x86/idle: Let prefer_mwait_c1_over_halt() return bool
  x86/idle: Cleanup idle_setup()
  x86/idle: Clean up idle selection
  x86/idle: Sanitize X86_BUG_AMD_E400 handling
  sched/idle: Conditionally handle tick broadcast in default_idle_call()
  x86: Increase brk randomness entropy for 64-bit systems
  x86/vdso: Move vDSO to mmap region
  x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
  x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
  x86/retpoline: Ensure default return thunk isn't used at runtime
  x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
  x86/vdso: Use $(addprefix ) instead of $(foreach )
  x86/vdso: Simplify obj-y addition
  x86/vdso: Consolidate targets and clean-files
  x86/bugs: Rename CONFIG_RETHUNK              => CONFIG_MITIGATION_RETHUNK
  x86/bugs: Rename CONFIG_CPU_SRSO             => CONFIG_MITIGATION_SRSO
  x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY       => CONFIG_MITIGATION_IBRS_ENTRY
  x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY      => CONFIG_MITIGATION_UNRET_ENTRY
  x86/bugs: Rename CONFIG_SLS                  => CONFIG_MITIGATION_SLS
  ...
Merge tag 'x86_misc_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2024-03-12T01:02:44+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-03-12T01:02:44+00:00 1f75619a721d5149d9a947f2177d3cffc473fbb7 Pull misc x86 fixes from Borislav Petkov: - Fix a wrong check in the function reporting whether a CPU executes (or not) a NMI handler - Ratelimit unknown NMIs messages in order to not potentially slow down the machine - Other fixlets * tag 'x86_misc_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi: Fix the inverse "in NMI handler" check Documentation/maintainer-tip: Add C++ tail comments exception Documentation/maintainer-tip: Add Closes tag x86/nmi: Rate limit unknown NMI messages Documentation/kernel-parameters: Add spec_rstack_overflow to mitigations=off 
Pull misc x86 fixes from Borislav Petkov:

 - Fix a wrong check in the function reporting whether a CPU executes
   (or not) a NMI handler

 - Ratelimit unknown NMIs messages in order to not potentially slow down
   the machine

 - Other fixlets

* tag 'x86_misc_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi: Fix the inverse "in NMI handler" check
  Documentation/maintainer-tip: Add C++ tail comments exception
  Documentation/maintainer-tip: Add Closes tag
  x86/nmi: Rate limit unknown NMI messages
  Documentation/kernel-parameters: Add spec_rstack_overflow to mitigations=off