Pull workqueue updates from Tejun Heo:

 - Unbound workqueues now support more flexible affinity scopes.

   The default behavior is to soft-affine according to last level cache
   boundaries. A work item queued from a given LLC is executed by a
   worker running on the same LLC but the worker may be moved across
   cache boundaries as the scheduler sees fit. On machines which
   multiple L3 caches, which are becoming more popular along with
   chiplet designs, this improves cache locality while not harming work
   conservation too much.

   Unbound workqueues are now also a lot more flexible in terms of
   execution affinity. Differeing levels of affinity scopes are
   supported and both the default and per-workqueue affinity settings
   can be modified dynamically. This should help working around amny of
   sub-optimal behaviors observed recently with asymmetric ARM CPUs.

   This involved signficant restructuring of workqueue code. Nothing was
   reported yet but there's some risk of subtle regressions. Should keep
   an eye out.

 - Rescuer workers now has more identifiable comms.

 - workqueue.unbound_cpus added so that CPUs which can be used by
   workqueue can be constrained early during boot.

 - Now that all the in-tree users have been flushed out, trigger warning
   if system-wide workqueues are flushed.

* tag 'wq-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (31 commits)
  workqueue: fix data race with the pwq->stats[] increment
  workqueue: Rename rescuer kworker
  workqueue: Make default affinity_scope dynamically updatable
  workqueue: Add "Affinity Scopes and Performance" section to documentation
  workqueue: Implement non-strict affinity scope for unbound workqueues
  workqueue: Add workqueue_attrs->__pod_cpumask
  workqueue: Factor out need_more_worker() check and worker wake-up
  workqueue: Factor out work to worker assignment and collision handling
  workqueue: Add multiple affinity scopes and interface to select them
  workqueue: Modularize wq_pod_type initialization
  workqueue: Add tools/workqueue/wq_dump.py which prints out workqueue configuration
  workqueue: Generalize unbound CPU pods
  workqueue: Factor out clearing of workqueue-only attrs fields
  workqueue: Factor out actual cpumask calculation to reduce subtlety in wq_update_pod()
  workqueue: Initialize unbound CPU pods later in the boot
  workqueue: Move wq_pod_init() below workqueue_init()
  workqueue: Rename NUMA related names to use pod instead
  workqueue: Rename workqueue_attrs->no_numa to ->ordered
  workqueue: Make unbound workqueues to use per-cpu pool_workqueues
  workqueue: Call wq_update_unbound_numa() on all CPUs in NUMA node on CPU hotplug
  ...

Pull USB / Thunderbolt / PHY driver updates from Greg KH:
 "Here is the big set of USB, Thunderbolt, and PHY driver updates for
  6.6-rc1. Included in here are:

   - PHY driver additions and cleanups

   - Thunderbolt minor additions and fixes

   - USB MIDI 2 gadget support added

   - dwc3 driver updates and additions

   - Removal of some old USB wireless code that was missed when that
     codebase was originally removed a few years ago, cleaning up some
     core USB code paths

   - USB core potential use-after-free fixes that syzbot from different
     people/groups keeps tripping over

   - typec updates and additions

   - gadget fixes and cleanups

   - loads of smaller USB core and driver cleanups all over the place

  Full details are in the shortlog. All of these have been in linux-next
  for a while with no reported problems"

* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  platform/chrome: cros_ec_typec: Configure Retimer cable type
  tcpm: Avoid soft reset when partner does not support get_status
  usb: typec: tcpm: reset counter when enter into unattached state after try role
  usb: typec: tcpm: set initial svdm version based on pd revision
  USB: serial: option: add FOXCONN T99W368/T99W373 product
  USB: serial: option: add Quectel EM05G variant (0x030e)
  usb: dwc2: add pci_device_id driver_data parse support
  usb: gadget: remove max support speed info in bind operation
  usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
  usb: gadget: config: remove max speed check in usb_assign_descriptors()
  usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
  usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
  usb: gadget: add a inline function gether_bitrate()
  usb: gadget: use working speed to calcaulate network bitrate and qlen
  dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
  usb: dwc3: exynos: Add support for Exynos850 variant
  usb: gadget: udc-xilinx: fix incorrect type in assignment warning
  usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
  usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
  USB: dwc2: hande irq on dead controller correctly
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the new "riscv,isa-extensions" and "riscv,isa-base"
   device tree interfaces for probing extensions

 - Support for userspace access to the performance counters

 - Support for more instructions in kprobes

 - Crash kernels can be allocated above 4GiB

 - Support for KCFI

 - Support for ELFs in !MMU configurations

 - ARCH_KMALLOC_MINALIGN has been reduced to 8

 - mmap() defaults to sv48-sized addresses, with longer addresses hidden
   behind a hint (similar to Arm and Intel)

 - Also various fixes and cleanups

* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
  riscv: support PREEMPT_DYNAMIC with static keys
  riscv: Move create_tmp_mapping() to init sections
  riscv: Mark KASAN tmp* page tables variables as static
  riscv: mm: use bitmap_zero() API
  riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
  riscv: remove redundant mv instructions
  RISC-V: mm: Document mmap changes
  RISC-V: mm: Update pgtable comment documentation
  RISC-V: mm: Add tests for RISC-V mm
  RISC-V: mm: Restrict address space for sv39,sv48,sv57
  riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
  riscv: allow kmalloc() caches aligned to the smallest value
  riscv: support the elf-fdpic binfmt loader
  binfmt_elf_fdpic: support 64-bit systems
  riscv: Allow CONFIG_CFI_CLANG to be selected
  riscv/purgatory: Disable CFI
  riscv: Add CFI error handling
  riscv: Add ftrace_stub_graph
  riscv: Add types to indirectly called assembly functions
  ...

Pull powerpc updates from Michael Ellerman:

 - Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
   configured SMT state when hotplugging CPUs into the system

 - Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
   Radix MMU to avoid a broadcast TLBIE flush on exit

 - Drop the exclusion between ptrace/perf watchpoints, and drop the now
   unused associated arch hooks

 - Add support for the "nohlt" command line option to disable CPU idle

 - Add support for -fpatchable-function-entry for ftrace, with GCC >=
   13.1

 - Rework memory block size determination, and support 256MB size on
   systems with GPUs that have hotpluggable memory

 - Various other small features and fixes

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.

* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
  macintosh/ams: linux/platform_device.h is needed
  powerpc/xmon: Reapply "Relax frame size for clang"
  powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
  powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
  powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
  powerpc/mpc5xxx: Add missing fwnode_handle_put()
  powerpc/config: Disable SLAB_DEBUG_ON in skiroot
  powerpc/pseries: Remove unused hcall tracing instruction
  powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
  powerpc: dts: add missing space before {
  powerpc/eeh: Use pci_dev_id() to simplify the code
  powerpc/64s: Move CPU -mtune options into Kconfig
  powerpc/powermac: Fix unused function warning
  powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
  powerpc: Don't include lppaca.h in paca.h
  powerpc/pseries: Move hcall_vphn() prototype into vphn.h
  powerpc/pseries: Move VPHN constants into vphn.h
  cxl: Drop unused detach_spa()
  powerpc: Drop zalloc_maybe_bootmem()
  powerpc/powernv: Use struct opal_prd_msg in more places
  ...

Chen Jiahao <chenjiahao16@huawei.com> says:

On riscv, the current crash kernel allocation logic is trying to
allocate within 32bit addressible memory region by default, if
failed, try to allocate without 4G restriction.

In need of saving DMA zone memory while allocating a relatively large
crash kernel region, allocating the reserved memory top down in
high memory, without overlapping the DMA zone, is a mature solution.
Hence this patchset introduces the parameter option crashkernel=X,[high,low].

One can reserve the crash kernel from high memory above DMA zone range
by explicitly passing "crashkernel=X,high"; or reserve a memory range
below 4G with "crashkernel=X,low". Besides, there are few rules need
to take notice:
1. "crashkernel=X,[high,low]" will be ignored if "crashkernel=size"
   is specified.
2. "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed
   and there is enough memory to be allocated under 4G.
3. When allocating crashkernel above 4G and no "crashkernel=X,low" is
   specified, a 128M low memory will be allocated automatically for
   swiotlb bounce buffer.
See Documentation/admin-guide/kernel-parameters.txt for more information.

To verify loading the crashkernel, adapted kexec-tools is attached below:
https://github.com/chenjh005/kexec-tools/tree/build-test-riscv-v2

Following test cases have been performed as expected:
1) crashkernel=256M                          //low=256M
2) crashkernel=1G                            //low=1G
3) crashkernel=4G                            //high=4G, low=128M(default)
4) crashkernel=4G crashkernel=256M,high      //high=4G, low=128M(default), high is ignored
5) crashkernel=4G crashkernel=256M,low       //high=4G, low=128M(default), low is ignored
6) crashkernel=4G,high                       //high=4G, low=128M(default)
7) crashkernel=256M,low                      //low=0M, invalid
8) crashkernel=4G,high crashkernel=256M,low  //high=4G, low=256M
9) crashkernel=4G,high crashkernel=4G,low    //high=0M, low=0M, invalid
10) crashkernel=512M@0xd0000000              //low=512M
11) crashkernel=1G,high crashkernel=0M,low   //high=1G, low=0M

* b4-shazam-merge:
  docs: kdump: Update the crashkernel description for riscv
  riscv: kdump: Implement crashkernel=X,[high,low]

Link: https://lore.kernel.org/r/20230726175000.2536220-1-chenjiahao16@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Pull documentation updates from Jonathan Corbet:
 "Documentation work keeps chugging along; this includes:

   - Work from Carlos Bilbao to integrate rustdoc output into the
     generated HTML documentation. This took some work to figure out how
     to do it without slowing the docs build and without creating people
     who don't have Rust installed, but Carlos got there

   - Move the loongarch and mips architecture documentation under
     Documentation/arch/

   - Some more maintainer documentation from Jakub

  ... plus the usual assortment of updates, translations, and fixes"

* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
  Docu: genericirq.rst: fix irq-example
  input: docs: pxrc: remove reference to phoenix-sim
  Documentation: serial-console: Fix literal block marker
  docs/mm: remove references to hmm_mirror ops and clean typos
  docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
  Documentation: Fix typos
  Documentation/ABI: Fix typos
  scripts: kernel-doc: fix macro handling in enums
  scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
  Documentation: riscv: Update boot image header since EFI stub is supported
  Documentation: riscv: Add early boot document
  Documentation: arm: Add bootargs to the table of added DT parameters
  docs: kernel-parameters: Refer to the correct bitmap function
  doc: update params of memhp_default_state=
  docs: Add book to process/kernel-docs.rst
  docs: sparse: fix invalid link addresses
  docs: vfs: clean up after the iterate() removal
  docs: Add a section on surveys to the researcher guidelines
  docs: move mips under arch
  docs: move loongarch under arch
  ...

Pull dma-maping updates from Christoph Hellwig:

 - allow dynamic sizing of the swiotlb buffer, to cater for secure
   virtualization workloads that require all I/O to be bounce buffered
   (Petr Tesarik)

 - move a declaration to a header (Arnd Bergmann)

 - check for memory region overlap in dma-contiguous (Binglei Wang)

 - remove the somewhat dangerous runtime swiotlb-xen enablement and
   unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)

 - per-node CMA improvements (Yajun Deng)

* tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: optimize get_max_slots()
  swiotlb: move slot allocation explanation comment where it belongs
  swiotlb: search the software IO TLB only if the device makes use of it
  swiotlb: allocate a new memory pool when existing pools are full
  swiotlb: determine potential physical address limit
  swiotlb: if swiotlb is full, fall back to a transient memory pool
  swiotlb: add a flag whether SWIOTLB is allowed to grow
  swiotlb: separate memory pool data from other allocator data
  swiotlb: add documentation and rename swiotlb_do_find_slots()
  swiotlb: make io_tlb_default_mem local to swiotlb.c
  swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
  dma-contiguous: check for memory region overlap
  dma-contiguous: support numa CMA for specified node
  dma-contiguous: support per-numa CMA for all architectures
  dma-mapping: move arch_dma_set_mask() declaration to header
  swiotlb: unexport is_swiotlb_active
  x86: always initialize xen-swiotlb when xen-pcifront is enabling
  xen/pci: add flag for PCI passthrough being possible

Pull tpm updates from Jarkko Sakkinen:

 - Restrict linking of keys to .ima and .evm keyrings based on
   digitalSignature attribute in the certificate

 - PowerVM: load machine owner keys into the .machine [1] keyring

 - PowerVM: load module signing keys into the secondary trusted keyring
   (keys blessed by the vendor)

 - tpm_tis_spi: half-duplex transfer mode

 - tpm_tis: retry corrupted transfers

 - Apply revocation list (.mokx) to an all system keyrings (e.g.
   .machine keyring)

Link: https://blogs.oracle.com/linux/post/the-machine-keyring [1]

* tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  certs: Reference revocation list for all keyrings
  tpm/tpm_tis_synquacer: Use module_platform_driver macro to simplify the code
  tpm: remove redundant variable len
  tpm_tis: Resend command to recover from data transfer errors
  tpm_tis: Use responseRetry to recover from data transfer errors
  tpm_tis: Move CRC check to generic send routine
  tpm_tis_spi: Add hardware wait polling
  KEYS: Replace all non-returning strlcpy with strscpy
  integrity: PowerVM support for loading third party code signing keys
  integrity: PowerVM machine keyring enablement
  integrity: check whether imputed trust is enabled
  integrity: remove global variable from machine_keyring.c
  integrity: ignore keys failing CA restrictions on non-UEFI platform
  integrity: PowerVM support for loading CA keys on machine keyring
  integrity: Enforce digitalSignature usage in the ima and evm keyrings
  KEYS: DigitalSignature link restriction
  tpm_tis: Revert "tpm_tis: Disable interrupts on ThinkPad T490s"

Pull ACPI updates from Rafael Wysocki:
 "These include new ACPICA material, a rework of the ACPI thermal
  driver, a switch-over of the ACPI processor driver to using _OSC
  instead of (long deprecated) _PDC for CPU initialization, a rework of
  firmware notifications handling in several drivers, fixes and cleanups
  for suspend-to-idle handling on AMD systems, ACPI backlight driver
  updates and more.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20230628
     including the following changes:
      - Suppress a GCC 12 dangling-pointer warning (Philip Prindeville)
      - Reformat the ACPI_STATE_COMMON macro and its users (George Guo)
      - Replace the ternary operator with ACPI_MIN() (Jiangshan Yi)
      - Add support for _DSC as per ACPI 6.5 (Saket Dumbre)
      - Remove a duplicate macro from zephyr header (Najumon B.A)
      - Add data structures for GED and _EVT tracking (Jose Marinho)
      - Fix misspelled CDAT DSMAS define (Dave Jiang)
      - Simplify an error message in acpi_ds_result_push() (Christophe
        Jaillet)
      - Add a struct size macro related to SRAT (Dave Jiang)
      - Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar)
      - Add support for RISC-V external interrupt controllers in MADT
        (Sunil V L)
      - Add RHCT flags, CMO and MMU nodes (Sunil V L)
      - Change ACPICA version to 20230628 (Bob Moore)

   - Introduce new wrappers for ACPICA notify handler install/remove and
     convert multiple drivers to using their own Notify() handlers
     instead of the ACPI bus type .notify() slated for removal (Michal
     Wilczynski)

   - Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
     (Hans de Goede)

   - Put ACPI video and its child devices explicitly into D0 on boot to
     avoid platform firmware confusion (Kai-Heng Feng)

   - Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby)

   - Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao)

   - Convert ACPI CPU initialization to using _OSC instead of _PDC that
     has been depreceted since 2018 and dropped from the specification
     in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki)

   - Drop non-functional nocrt parameter from ACPI thermal (Mario
     Limonciello)

   - Clean up the ACPI thermal driver, rework the handling of firmware
     notifications in it and make it provide a table of generic trip
     point structures to the core during initialization (Rafael Wysocki)

   - Defer enumeration of devices with _DEP pointing to IVSC (Wentong
     Wu)

   - Install SystemCMOS address space handler for ACPI000E (TAD) to meet
     platform firmware expectations on some platforms (Zhang Rui)

   - Fix finding the generic error data in the ACPi extlog driver for
     compatibility with old and new firmware interface versions
     (Xiaochun Lee)

   - Remove assorted unused declarations of functions (Yue Haibing)

   - Move AMBA bus scan handling into arm64 specific directory (Sudeep
     Holla)

   - Fix and clean up suspend-to-idle interface for AMD systems (Mario
     Limonciello, Andy Shevchenko)

   - Fix string truncation warning in pnpacpi_add_device() (Sunil V L)"

* tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits)
  ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
  ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
  ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
  ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
  ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
  ACPI: x86: s2idle: Post-increment variables when getting constraints
  ACPI: Adjust #ifdef for *_lps0_dev use
  ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
  ACPI: Remove assorted unused declarations of functions
  ACPI: extlog: Fix finding the generic error data for v3 structure
  PNP: ACPI: Fix string truncation warning
  ACPI: Remove unused extern declaration acpi_paddr_to_node()
  ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
  ACPI: video: Put ACPI video and its child devices into D0 on boot
  ACPI: processor: LoongArch: Get physical ID from MADT
  ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
  ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
  ACPI: thermal: Drop unnecessary thermal zone callbacks
  ACPI: thermal: Rework thermal_get_trend()
  ACPI: thermal: Use trip point table to register thermal zones
  ...

Pull s390 updates from Heiko Carstens:

 - Add vfio-ap support to pass-through crypto devices to secure
   execution guests

 - Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
   required to handle key generate and key derive (e.g. secure key to
   protected key) correctly

 - Add missing secure/has_secure sysfs files for the case where it is
   not possible to figure where a system has been booted from. Existing
   user space relies on that these files are always present

 - Fix DCSS block device driver list corruption, caused by incorrect
   error handling

 - Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
   functions to enforce type checking

 - Cleanups, improvements, and minor fixes to the kernel mapping setup

 - Fix various virtual vs physical address confusions

 - Move pfault code to separate file, since it has nothing to do with
   regular fault handling

 - Move s390 documentation to Documentation/arch/ like it has been done
   for other architectures already

 - Add HAVE_FUNCTION_GRAPH_RETVAL support

 - Factor out the s390_hypfs filesystem and add a new config option for
   it. The filesystem is deprecated and as soon as all users are gone it
   can be removed some time in the not so near future

 - Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
   driver

 - Add support for user-defined certificates: receive user-defined
   certificates with a diagnose call and provide them via 'cert_store'
   keyring to user space

 - Couple of other small fixes and improvements all over the place

* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
  s390/pci: use builtin_misc_device macro to simplify the code
  s390/vfio-ap: make sure nib is shared
  KVM: s390: export kvm_s390_pv*_is_protected functions
  s390/uv: export uv_pin_shared for direct usage
  s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
  s390/vfio-ap: handle queue state change in progress on reset
  s390/vfio-ap: use work struct to verify queue reset
  s390/vfio-ap: store entire AP queue status word with the queue object
  s390/vfio-ap: remove upper limit on wait for queue reset to complete
  s390/vfio-ap: allow deconfigured queue to be passed through to a guest
  s390/vfio-ap: wait for response code 05 to clear on queue reset
  s390/vfio-ap: clean up irq resources if possible
  s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
  s390/ipl: refactor deprecated strncpy
  s390/ipl: fix virtual vs physical address confusion
  s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
  s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
  s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
  ...