Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
The functionality was implemented in commit 0f8a00137411 ("Bluetooth:
Allow reset via sysfs")
Fixes: 0f8a00137411 ("Bluetooth: Allow reset via sysfs")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power supply extensions, which allows adding properties
to a power supply device from a separate driver. This will be used
initially to extend the generic ACPI charger/battery driver with
vendor extensions for charge thresholds.
- convert all drivers from power_supply_for_each_device to new
power_supply_for_each_psy(), which avoids lots of casting being
done in the drivers.
- avoid LED trigger like values in uevent for
POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR
- introduce POWER_SUPPLY_PROP_CHARGE_TYPES, which is similar to the
POWER_SUPPLY_PROP_CHARGE_TYPE property, but also lists the
available options on the specific platform
Power-supply drivers
- dell-laptop: use new power_supply_charge_types_show/_parse helpers
- stc3117: new driver for equally named fuel gauge chip
- bq24190: add support for new POWER_SUPPLY_PROP_CHARGE_TYPES
- bq24190: add BQ24297 support
- bq27xxx: add voltage min design for bq27000/bq27200
- cros_charge-control: convert to new power supply extension API
- multiple drivers: constify 'struct bin_attribute'
- ds2782: convert to device managed resources
- max1720x: add charge full property
- max1720x: support extra thermistor temperatures
- max17042: add max77705 support
- ip5xxx-power: add support for IP5306
- ltc4162-l-charger: add ltc4162-f/s and ltc4015 support
- gpio-charger: support for default charge current limit
- misc small cleanups and fixes
Reset drivers:
- at91-poweroff: add sam9x7 support"
* tag 'for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (77 commits)
power: supply: max1720x: add support for reading internal and thermistor temperatures
power: supply: ltc4162l: Use GENMASK macro in bitmask operation
power: supply: max17042: add max77705 fuel gauge support
dt-bindings: power: supply: max17042: add max77705 support
power: supply: add undervoltage health status property
power: supply: max17042: add platform driver variant
power: supply: max17042: make interrupt shared
power: reset: keystone: Use syscon_regmap_lookup_by_phandle_args
power: supply: Use str_enable_disable-like helpers
platform/x86: dell-laptop: Use power_supply_charge_types_show/_parse() helpers
power: supply: bq2415x_charger: Immediately reschedule delayed work on notifier events
power: supply: Add STC3117 fuel gauge unit driver
dt-bindings: power: supply: Add STC3117 Fuel Gauge
power: supply: ug3105_battery: Let the core handle POWER_SUPPLY_PROP_TECHNOLOGY
power: supply: gpio-charger: add support for default charge current limit
dt-bindings: power: supply: gpio-charger: add support for default charge current limit
power: supply: Use power_supply_external_power_changed() in __power_supply_changed_work()
power: supply: core: fix build of extension sysfs group if CONFIG_SYSFS=n
power: supply: bq2415x_charger: report charging state changes to userspace
bq27xxx: add voltage min design for bq27000 and bq27200
...
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
Update DAMON ABI document for added DAMOS filter 'allow' file. Link: https://lkml.kernel.org/r/20250109175126.57878-9-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Document the new ABI for per-region operations set layer-handled DAMOS filters passed bytes statistic. Link: https://lkml.kernel.org/r/20250106193401.109161-17-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Document the new ABI for per-scheme operations set layer-handled DAMOS filters passed bytes statistic on the ABI document. Link: https://lkml.kernel.org/r/20250106193401.109161-12-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
Pull perf-tools updates from Namhyung Kim:
"There are a lot of changes in the perf tools in this cycle.
build:
- Use generic syscall table to generate syscall numbers on supported
archs
- This also enables to get rid of libaudit which was used for syscall
numbers
- Remove python2 support as it's deprecated for years
- Fix issues on static build with libzstd
perf record:
- Intel-PT supports "aux-action" config term to pause or resume
tracing in the aux-buffer. Users can start the intel_pt event as
"started-paused" and configure other events to control the Intel-PT
tracing:
# perf record --kcore -e intel_pt/aux-action=start-paused/ \
-e syscalls:sys_enter_newuname/aux-action=resume/ \
-e syscalls:sys_exit_newuname/aux-action=pause/ -- uname
This requires kernel support (which was added in v6.13)
perf lock:
- 'perf lock contention' command has an ability to symbolize locks in
dynamically allocated objects using slab cache name when it runs
with BPF. Those dynamic locks would have "&" prefix in the name to
distinguish them from ordinary (static) locks
# perf lock con -abl -E 5 sleep 1
contended total wait max wait avg wait address symbol
2 1.95 us 1.77 us 975 ns ffff9d5e852d3498 &task_struct (mutex)
1 1.18 us 1.18 us 1.18 us ffff9d5e852d3538 &task_struct (mutex)
4 1.12 us 354 ns 279 ns ffff9d5e841ca800 &kmalloc-cg-512 (mutex)
2 859 ns 617 ns 429 ns ffffffffa41c3620 delayed_uprobe_lock (mutex)
3 691 ns 388 ns 230 ns ffffffffa41c0940 pack_mutex (mutex)
This also requires kernel/BPF support (which was added in v6.13)
perf ftrace:
- 'perf ftrace latency' command gets a couple of options to support
linear buckets instead of exponential. Also it's possible to
specify max and min latency for the linear buckets:
# perf ftrace latency -abn -T switch_mm_irqs_off --bucket-range=100 \
--min-latency=200 --max-latency=800 -- sleep 1
# DURATION | COUNT | GRAPH |
0 - 200 ns | 186 | ### |
200 - 300 ns | 256 | ##### |
300 - 400 ns | 364 | ####### |
400 - 500 ns | 223 | #### |
500 - 600 ns | 111 | ## |
600 - 700 ns | 41 | |
700 - 800 ns | 141 | ## |
800 - ... ns | 169 | ### |
# statistics (in nsec)
total time: 2162212
avg time: 967
max time: 16817
min time: 132
count: 2236
- As you can see in the above example, it nows shows the statistics
at the end so that users can see the avg/max/min latencies easily
- 'perf ftrace profile' command has --graph-opts option like 'perf
ftrace trace' so that it can control the tracing behaviors in the
same way. For example, it can limit the function call depth or
threshold
perf script:
- Improve physical memory resolution in 'mem-phys-addr' script by
parsing /proc/iomem file
# perf script mem-phys-addr -- find /
...
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-85f7fffff : System RAM 8929 69.7
547600000-54785d23f : Kernel data 1240 9.7
546a00000-5474bdfff : Kernel rodata 490 3.8
5480ce000-5485fffff : Kernel bss 121 0.9
0-fff : Reserved 3860 30.1
100000-89c01fff : System RAM 18 0.1
8a22c000-8df6efff : System RAM 5 0.0
Others:
- 'perf test' gets --runs-per-test option to run the test cases
repeatedly. This would be helpful to see if it's flaky
- Add 'parse_events' method to Python perf extension module, so that
users can use the same event parsing logic in the python code. One
more step towards implementing perf tools in Python. :)
- Support opening tracepoint events without libtraceevent. This will
be helpful if it won't use the tracing data like in 'perf stat'
- Update ARM Neoverse N2/V2 JSON events and metrics"
* tag 'perf-tools-for-v6.14-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (176 commits)
perf test: Update event_groups test to use instructions
perf bench: Fix undefined behavior in cmpworker()
perf annotate: Prefer passing evsel to evsel->core.idx
perf lock: Rename fields in lock_type_table
perf lock: Add percpu-rwsem for type filter
perf lock: Fix parse_lock_type which only retrieve one lock flag
perf lock: Fix return code for functions in __cmd_contention
perf hist: Fix width calculation in hpp__fmt()
perf hist: Fix bogus profiles when filters are enabled
perf hist: Deduplicate cmp/sort/collapse code
perf test: Improve verbose documentation
perf test: Add a runs-per-test flag
perf test: Fix parallel/sequential option documentation
perf test: Send list output to stdout rather than stderr
perf test: Rename functions and variables for better clarity
perf tools: Expose quiet/verbose variables in Makefile.perf
perf config: Add a function to set one variable in .perfconfig
perf test perftool_testsuite: Return correct value for skipping
perf test perftool_testsuite: Add missing description
perf test record+probe_libc_inet_pton: Make test resilient
...