MADV_HUGEPAGE is a new addition to readahead with behavior distinct from
normal pages.  To prevent confusion, we should update the documentation
accordingly.

Link: https://lkml.kernel.org/r/20241113150711.1685-1-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull char / misc driver updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystem changes
  for 6.12-rc1.

  Lots of changes in here, primarily dominated by the usual IIO driver
  updates and additions, but there are also small driver subsystem
  updates all over the place. Included in here are:

   - lots and lots of new IIO drivers and updates to existing ones

   - interconnect subsystem updates and new drivers

   - nvmem subsystem updates and new drivers

   - mhi driver updates

   - power supply subsystem updates

   - kobj_type const work for many different small subsystems

   - comedi driver fix

   - coresight subsystem and driver updates

   - fpga subsystem improvements

   - slimbus fixups

   - binder new feature addition for "frozen" notifications

   - lots and lots of other small driver updates and cleanups

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
  greybus: gb-beagleplay: Add firmware upload API
  arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
  dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
  MAINTAINERS: Update path for U-Boot environment variables YAML
  nvmem: layouts: add U-Boot env layout
  comedi: ni_routing: tools: Check when the file could not be opened
  ocxl: Remove the unused declarations in headr file
  hpet: Fix the wrong format specifier
  uio: Constify struct kobj_type
  cxl: Constify struct kobj_type
  binder: modify the comment for binder_proc_unlock
  iio: adc: axp20x_adc: add support for AXP717 ADC
  dt-bindings: iio: adc: Add AXP717 compatible
  iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
  w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  tools: iio: rm .*.cmd when make clean
  iio: adc: standardize on formatting for id match tables
  iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
  bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
  ...

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the large set of USB and Thunderbolt changes for 6.12-rc1.

  Nothing "major" in here, except for a new 9p network gadget that has
  been worked on for a long time (all of the needed acks are here)

  Other than that, it's the usual set of:

   - Thunderbolt / USB4 driver updates and additions for new hardware

   - dwc3 driver updates and new features added

   - xhci driver updates

   - typec driver updates

   - USB gadget updates and api additions to make some gadgets more
     configurable by userspace

   - dwc2 driver updates

   - usb phy driver updates

   - usbip feature additions

   - other minor USB driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
  sub: cdns3: Use predefined PCI vendor ID constant
  sub: cdns2: Use predefined PCI vendor ID constant
  USB: misc: yurex: fix race between read and write
  USB: misc: cypress_cy7c63: check for short transfer
  USB: appledisplay: close race between probe and completion handler
  USB: class: CDC-ACM: fix race between get_serial and set_serial
  usb: r8a66597-hcd: make read-only const arrays static
  usb: typec: ucsi: Fix busy loop on ASUS VivoBooks
  usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed()
  usb: storage: ene_ub6250: Fix right shift warnings
  usb: roles: Improve the fix for a false positive recursive locking complaint
  locking/mutex: Introduce mutex_init_with_key()
  locking/mutex: Define mutex_init() once
  net/9p/usbg: fix CONFIG_USB_GADGET dependency
  usb: xhci: fix loss of data on Cadence xHC
  usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host
  usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep
  usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
  usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
  usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support
  ...

Pull f2fs updates from Jaegeuk Kim:
 "The main changes include converting major IO paths to use folio, and
  adding various knobs to control GC more flexibly for Zoned devices.

  In addition, there are several patches to address corner cases of
  atomic file operations and better support for file pinning on zoned
  device.

  Enhancement:
   - add knobs to tune foreground/background GCs for Zoned devices
   - convert IO paths to use folio
   - reduce expensive checkpoint trigger frequency
   - allow F2FS_IPU_NOCACHE for pinned file
   - forcibly migrate to secure space for zoned device file pinning
   - get rid of buffer_head use
   - add write priority option based on zone UFS
   - get rid of online repair on corrupted directory

  Bug fixes:
   - fix to don't panic system for no free segment fault injection
   - fix to don't set SB_RDONLY in f2fs_handle_critical_error()
   - avoid unused block when dio write in LFS mode
   - compress: don't redirty sparse cluster during {,de}compress
   - check discard support for conventional zones
   - atomic: prevent atomic file from being dirtied before commit
   - atomic: fix to check atomic_file in f2fs ioctl interfaces
   - atomic: fix to forbid dio in atomic_file
   - atomic: fix to truncate pagecache before on-disk metadata truncation
   - atomic: create COW inode from parent dentry
   - atomic: fix to avoid racing w/ GC
   - atomic: require FMODE_WRITE for atomic write ioctls
   - fix to wait page writeback before setting gcing flag
   - fix to avoid racing in between read and OPU dio write, dio completion
   - fix several potential integer overflows in file offsets and dir_block_index
   - fix to avoid use-after-free in f2fs_stop_gc_thread()

  As usual, there are several code clean-ups and refactorings"

* tag 'f2fs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
  f2fs: allow F2FS_IPU_NOCACHE for pinned file
  f2fs: forcibly migrate to secure space for zoned device file pinning
  f2fs: remove unused parameters
  f2fs: fix to don't panic system for no free segment fault injection
  f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error()
  f2fs: add valid block ratio not to do excessive GC for one time GC
  f2fs: create gc_no_zoned_gc_percent and gc_boost_zoned_gc_percent
  f2fs: do FG_GC when GC boosting is required for zoned devices
  f2fs: increase BG GC migration window granularity when boosted for zoned devices
  f2fs: add reserved_segments sysfs node
  f2fs: introduce migration_window_granularity
  f2fs: make BG GC more aggressive for zoned devices
  f2fs: avoid unused block when dio write in LFS mode
  f2fs: fix to check atomic_file in f2fs ioctl interfaces
  f2fs: get rid of online repaire on corrupted directory
  f2fs: prevent atomic file from being dirtied before commit
  f2fs: get rid of page->index
  f2fs: convert read_node_page() to use folio
  f2fs: convert __write_node_page() to use folio
  f2fs: convert f2fs_write_data_page() to use folio
  ...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Wait for device readiness after reset by polling Vendor ID and
     looking for Configuration RRS instead of polling the Command
     register and looking for non-error completions, to avoid hardware
     retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)

   - Rename CRS Completion Status to RRS ('Request Retry Status') to
     match PCIe r6.0 spec usage (Bjorn Helgaas)

   - Clear LBMS bit after a manual link retrain so we don't try to
     retrain a link when there's no downstream device anymore (Maciej W.
     Rozycki)

   - Revert to the original link speed after retraining fails instead of
     leaving it restricted to 2.5GT/s, so a future device has a chance
     to use higher speeds (Maciej W. Rozycki)

   - Wait for each level of downstream bus, not just the first, to
     become accessible before restoring devices on that bus (Ilpo
     Järvinen)

   - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
     without having to stomp on the core's pdev->dev.groups (Lukas
     Wunner)

  Driver binding:

   - Export pcim_request_region(), a managed counterpart of
     pci_request_region(), for use by drivers (Philipp Stanner)

   - Export pcim_iomap_region() and deprecate pcim_iomap_regions()
     (Philipp Stanner)

   - Request the PCI BAR used by xboxvideo (Philipp Stanner)

   - Request and map drm/ast BARs with pcim_iomap_region() (Philipp
     Stanner)

  MSI:

   - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
     single IRQ line and cannot set the affinity of each MSI to a
     specific CPU core (Marek Vasut)

   - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
     implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
     mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
     xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
     warnings (Marek Vasut)

  Power management:

   - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
     Dybcio)

  PCI device hotplug:

   - Remove unnecessary hpc_ops struct from shpchp (ngn)

   - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
     (weiyufeng)

  Virtualization:

   - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)

   - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
     but does provide ACS-like features (Subramanian Ananthanarayanan)

  IOMMU:

   - Add function 0 DMA alias quirk for Glenfly Arise audio function,
     which uses the function 0 Requester ID (WangYuli)

  NPEM:

   - Add Native PCIe Enclosure Management (NPEM) support for sysfs
     control of NVMe RAID storage indicators (ok/fail/locate/
     rebuild/etc) (Mariusz Tkaczyk)

   - Add support for the ACPI _DSM PCIe SSD status LED management, which
     is functionally similar to NPEM but mediated by platform firmware
     (Mariusz Tkaczyk)

  Device trees:

   - Drop minItems and maxItems from ranges in PCI generic host binding
     since host bridges may have several MMIO and I/O port apertures
     (Frank Li)

   - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
     clocks (Krzysztof Kozlowski)

  Altera PCIe controller driver:

   - Convert altera DT bindings from text to YAML (Matthew Gerlach)

   - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
     thing and is what other drivers use (Jinjie Ruan)

  Broadcom STB PCIe controller driver:

   - Add DT binding maxItems for reset controllers (Jim Quinlan)

   - Use the 'bridge' reset method if described in the DT (Jim Quinlan)

   - Use the 'swinit' reset method if described in the DT (Jim Quinlan)

   - Add 'has_phy' so the existence of a 'rescal' reset controller
     doesn't imply software control of it (Jim Quinlan)

   - Add support for many inbound DMA windows (Jim Quinlan)

   - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
     families of multiple similar devices (Jim Quinlan)

   - Add Broadcom 7712 DT description and driver support (Jim Quinlan)

   - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
     maintainability (Bjorn Helgaas)

  Freescale i.MX6 PCIe controller driver:

   - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
     (Richard Zhu)

   - Fix a code restructuring error that caused i.MX8MM and i.MX8MP
     Endpoints to fail to establish link (Richard Zhu)

   - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
     outbound alignment requirement (Richard Zhu)

   - Call phy_power_off() in the .probe() error path (Frank Li)

   - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
     supported (Frank Li)

   - Manage Refclk by using SoC-specific callbacks instead of switch
     statements (Frank Li)

   - Manage core reset by using SoC-specific callbacks instead of switch
     statements (Frank Li)

   - Expand comments for erratum ERR010728 workaround (Frank Li)

   - Use generic PHY APIs to configure mode, speed, and submode, which
     is harmless for devices that implement their own internal PHY
     management and don't set the generic imx_pcie->phy (Frank Li)

   - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
     Root Complex support (Richard Zhu)

  Freescale Layerscape PCIe controller driver:

   - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
     fsl,lx2160ar2-pcie (Frank Li)

   - Add layerscape-pcie DT binding deprecated 'num-viewport' property
     to address a DT checker warning (Frank Li)

   - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
     (Frank Li)

  Loongson PCIe controller driver:

   - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
     (Huacai Chen)

  Marvell Aardvark PCIe controller driver:

   - Fix issue with emulating Configuration RRS for two-byte reads of
     Vendor ID; previously it only worked for four-byte reads (Bjorn
     Helgaas)

  MediaTek PCIe Gen3 controller driver:

   - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
     types (Lorenzo Bianconi)

   - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)

   - Add DT and driver support for Airoha EN7581 PCIe controller
     (Lorenzo Bianconi)

  Qualcomm PCIe controller driver:

   - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
     Ansari)

   - Add back DT 'vddpe-3v3-supply', which was incorrectly removed
     earlier (Johan Hovold)

   - Drop endpoint redundant masking of global IRQ events (Manivannan
     Sadhasivam)

   - Clarify unknown global IRQ message and only log it once to avoid a
     flood (Manivannan Sadhasivam)

   - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
     Sadhasivam)

   - Assign PCI domain number for endpoint controllers (Manivannan
     Sadhasivam)

   - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
     endpoint controller (Manivannan Sadhasivam)

   - Add global SPI interrupt for PCIe link events to DT binding
     (Manivannan Sadhasivam)

   - Add global RC interrupt handler to handle 'Link up' events and
     automatically enumerate hot-added devices (Manivannan Sadhasivam)

   - Avoid mirroring of DBI and iATU register space so it doesn't
     overlap BAR MMIO space (Prudhvi Yarlagadda)

   - Enable controller resources like PHY only after PERST# is
     deasserted to partially avoid the problem that the endpoint SoC
     crashes when accessing things when Refclk is absent (Manivannan
     Sadhasivam)

   - Add 16.0 GT/s equalization and RX lane margining settings (Shashank
     Babu Chinta Venkata)

   - Pass domain number to pci_bus_release_domain_nr() explicitly to
     avoid a NULL pointer dereference (Manivannan Sadhasivam)

  Renesas R-Car PCIe controller driver:

   - Make the read-only const array 'check_addr' static (Colin Ian King)

   - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
     (Yoshihiro Shimoda)

  TI DRA7xx PCIe controller driver:

   - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
     handler is NULL (Siddharth Vadapalli)

   - Handle IRQ request errors during root port and endpoint probe
     (Siddharth Vadapalli)

  TI J721E PCIe driver:

   - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
     the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
     Vadapalli)

   - Extract the cadence link setup from cdns_pcie_host_setup() so link
     setup can be done separately during resume (Thomas Richard)

   - Add T_PERST_CLK_US definition for the mandatory delay between
     Refclk becoming stable and PERST# being deasserted (Thomas Richard)

   - Add j721e suspend and resume support (Théo Lebrun)

  TI Keystone PCIe controller driver:

   - Fix NULL pointer checking when applying MRRS limitation quirk for
     AM65x SR 1.0 Errata #i2037 (Dan Carpenter)

  Xilinx NWL PCIe controller driver:

   - Fix off-by-one error in INTx IRQ handler that caused INTx
     interrupts to be lost or delivered as the wrong interrupt (Sean
     Anderson)

   - Rate-limit misc interrupt messages (Sean Anderson)

   - Turn off the clock on probe failure and device removal (Sean
     Anderson)

   - Add DT binding and driver support for enabling/disabling PHYs (Sean
     Anderson)

   - Add PCIe phy bindings for the ZCU102 (Sean Anderson)

  Xilinx XDMA PCIe controller driver:

   - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
     binding and xilinx-dma-pl driver (Thippeswamy Havalige)

  Miscellaneous:

   - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)

   - Fix minor kerneldoc issues and typos (Bjorn Helgaas)

   - Use PCI_DEVID() macro in aer_inject() instead of open-coding it
     (Jinjie Ruan)

   - Check pcie_find_root_port() return in x86 fixups to avoid NULL
     pointer dereferences (Samasth Norway Ananda)

   - Make pci_bus_type constant (Kunwu Chan)

   - Remove unused declarations of __pci_pme_wakeup() and
     pci_vpd_release() (Yue Haibing)

   - Remove any leftover .*.cmd files with make clean (zhang jiao)

   - Remove unused BILLION macro (zhang jiao)"

* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
  PCI: Fix typos
  dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
  tools: PCI: Remove unused BILLION macro
  tools: PCI: Remove .*.cmd files with make clean
  PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
  PCI: dra7xx: Fix error handling when IRQ request fails in probe
  PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
  PCI: qcom: Add RX lane margining settings for 16.0 GT/s
  PCI: qcom: Add equalization settings for 16.0 GT/s
  PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
  PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
  PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
  PCI: Mark Creative Labs EMU20k2 INTx masking as broken
  dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
  dt-bindings: PCI: altera: msi: Convert to YAML
  PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
  PCI: Rename CRS Completion Status to RRS
  PCI: aardvark: Correct Configuration RRS checking
  PCI: Wait for device readiness with Configuration RRS
  PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
  ...

Pull non-MM updates from Andrew Morton:
 "Many singleton patches - please see the various changelogs for
  details.

  Quite a lot of nilfs2 work this time around.

  Notable patch series in this pull request are:

   - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
     assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
     to provide (much) more accurate results. The current implementation
     was causing Uwe some issues in the PWM drivers.

   - "xz: Updates to license, filters, and compression options" from
     Lasse Collin. Miscellaneous maintenance and kinor feature work to
     the xz decompressor.

   - "Fix some GDB command error and add some GDB commands" from
     Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.

   - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
     Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
     warnings about this.

   - "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
     Adds various commonly-available ioctls to nilfs2.

   - "This series fixes a number of formatting issues in kernel doc
     comments" from Ryusuke Konishi does that.

   - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
     Konishi. Fix issues where -ENOENT was being unintentionally and
     inappropriately returned to userspace.

   - "nilfs2: assorted cleanups" from Huang Xiaojia.

   - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
     Konishi fixes some issues which can occur on corrupted nilfs2
     filesystems.

   - "scripts/decode_stacktrace.sh: improve error reporting and
     usability" from Luca Ceresoli does those things"

* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
  list: test: increase coverage of list_test_list_replace*()
  list: test: fix tests for list_cut_position()
  proc: use __auto_type more
  treewide: correct the typo 'retun'
  ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
  nilfs2: remove duplicate 'unlikely()' usage
  nilfs2: fix potential oob read in nilfs_btree_check_delete()
  nilfs2: determine empty node blocks as corrupted
  nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
  user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
  tools/mm: rm thp_swap_allocator_test when make clean
  squashfs: fix percpu address space issues in decompressor_multi_percpu.c
  lib: glob.c: added null check for character class
  nilfs2: refactor nilfs_segctor_thread()
  nilfs2: use kthread_create and kthread_stop for the log writer thread
  nilfs2: remove sc_timer_task
  nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
  nilfs2: eliminate the shared counter and spinlock for i_generation
  nilfs2: separate inode type information from i_state field
  nilfs2: use the BITS_PER_LONG macro
  ...

Pull MM updates from Andrew Morton:
 "Along with the usual shower of singleton patches, notable patch series
  in this pull request are:

   - "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
     consistency to the APIs and behaviour of these two core allocation
     functions. This also simplifies/enables Rustification.

   - "Some cleanups for shmem" from Baolin Wang. No functional changes -
     mode code reuse, better function naming, logic simplifications.

   - "mm: some small page fault cleanups" from Josef Bacik. No
     functional changes - code cleanups only.

   - "Various memory tiering fixes" from Zi Yan. A small fix and a
     little cleanup.

   - "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
     simplifications and .text shrinkage.

   - "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
     Butt. This is a feature, it adds new feilds to /proc/vmstat such as

       $ grep kstack /proc/vmstat
       kstack_1k 3
       kstack_2k 188
       kstack_4k 11391
       kstack_8k 243
       kstack_16k 0

     which tells us that 11391 processes used 4k of stack while none at
     all used 16k. Useful for some system tuning things, but
     partivularly useful for "the dynamic kernel stack project".

   - "kmemleak: support for percpu memory leak detect" from Pavel
     Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.

   - "mm: memcg: page counters optimizations" from Roman Gushchin. "3
     independent small optimizations of page counters".

   - "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
     David Hildenbrand. Improves PTE/PMD splitlock detection, makes
     powerpc/8xx work correctly by design rather than by accident.

   - "mm: remove arch_make_page_accessible()" from David Hildenbrand.
     Some folio conversions which make arch_make_page_accessible()
     unneeded.

   - "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
     Finkel. Cleans up and fixes our handling of the resetting of the
     cgroup/process peak-memory-use detector.

   - "Make core VMA operations internal and testable" from Lorenzo
     Stoakes. Rationalizaion and encapsulation of the VMA manipulation
     APIs. With a view to better enable testing of the VMA functions,
     even from a userspace-only harness.

   - "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
     issues in the zswap global shrinker, resulting in improved
     performance.

   - "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
     in some missing info in /proc/zoneinfo.

   - "mm: replace follow_page() by folio_walk" from David Hildenbrand.
     Code cleanups and rationalizations (conversion to folio_walk())
     resulting in the removal of follow_page().

   - "improving dynamic zswap shrinker protection scheme" from Nhat
     Pham. Some tuning to improve zswap's dynamic shrinker. Significant
     reductions in swapin and improvements in performance are shown.

   - "mm: Fix several issues with unaccepted memory" from Kirill
     Shutemov. Improvements to the new unaccepted memory feature,

   - "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
     DAX PUDs. This was missing, although nobody seems to have notied
     yet.

   - "Introduce a store type enum for the Maple tree" from Sidhartha
     Kumar. Cleanups and modest performance improvements for the maple
     tree library code.

   - "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
     more cgroup v1 remnants away from the v2 memcg code.

   - "memcg: initiate deprecation of v1 features" from Shakeel Butt.
     Adds various warnings telling users that memcg v1 features are
     deprecated.

   - "mm: swap: mTHP swap allocator base on swap cluster order" from
     Chris Li. Greatly improves the success rate of the mTHP swap
     allocation.

   - "mm: introduce numa_memblks" from Mike Rapoport. Moves various
     disparate per-arch implementations of numa_memblk code into generic
     code.

   - "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
     improves the performance of munmap() of swap-filled ptes.

   - "support large folio swap-out and swap-in for shmem" from Baolin
     Wang. With this series we no longer split shmem large folios into
     simgle-page folios when swapping out shmem.

   - "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
     performance improvements and code reductions for gigantic folios.

   - "support shmem mTHP collapse" from Baolin Wang. Adds support for
     khugepaged's collapsing of shmem mTHP folios.

   - "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
     performance regression due to the addition of mseal().

   - "Increase the number of bits available in page_type" from Matthew
     Wilcox. Increases the number of bits available in page_type!

   - "Simplify the page flags a little" from Matthew Wilcox. Many legacy
     page flags are now folio flags, so the page-based flags and their
     accessors/mutators can be removed.

   - "mm: store zero pages to be swapped out in a bitmap" from Usama
     Arif. An optimization which permits us to avoid writing/reading
     zero-filled zswap pages to backing store.

   - "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
     window which occurs when a MAP_FIXED operqtion is occurring during
     an unrelated vma tree walk.

   - "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
     the vma_merge() functionality, making ot cleaner, more testable and
     better tested.

   - "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
     Minor fixups of DAMON selftests and kunit tests.

   - "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
     Code cleanups and folio conversions.

   - "Shmem mTHP controls and stats improvements" from Ryan Roberts.
     Cleanups for shmem controls and stats.

   - "mm: count the number of anonymous THPs per size" from Barry Song.
     Expose additional anon THP stats to userspace for improved tuning.

   - "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
     folio conversions and removal of now-unused page-based APIs.

   - "replace per-quota region priorities histogram buffer with
     per-context one" from SeongJae Park. DAMON histogram
     rationalization.

   - "Docs/damon: update GitHub repo URLs and maintainer-profile" from
     SeongJae Park. DAMON documentation updates.

   - "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
     improve related doc and warn" from Jason Wang: fixes usage of page
     allocator __GFP_NOFAIL and GFP_ATOMIC flags.

   - "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
     This was overprovisioning THPs in sparsely accessed memory areas.

   - "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
     Add support for zram run-time compression algorithm tuning.

   - "mm: Care about shadow stack guard gap when getting an unmapped
     area" from Mark Brown. Fix up the various arch_get_unmapped_area()
     implementations to better respect guard areas.

   - "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
     of mem_cgroup_iter() and various code cleanups.

   - "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
     pfnmap support.

   - "resource: Fix region_intersects() vs add_memory_driver_managed()"
     from Huang Ying. Fix a bug in region_intersects() for systems with
     CXL memory.

   - "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
     a couple more code paths to correctly recover from the encountering
     of poisoned memry.

   - "mm: enable large folios swap-in support" from Barry Song. Support
     the swapin of mTHP memory into appropriately-sized folios, rather
     than into single-page folios"

* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
  zram: free secondary algorithms names
  uprobes: turn xol_area->pages[2] into xol_area->page
  uprobes: introduce the global struct vm_special_mapping xol_mapping
  Revert "uprobes: use vm_special_mapping close() functionality"
  mm: support large folios swap-in for sync io devices
  mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
  mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
  mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
  set_memory: add __must_check to generic stubs
  mm/vma: return the exact errno in vms_gather_munmap_vmas()
  memcg: cleanup with !CONFIG_MEMCG_V1
  mm/show_mem.c: report alloc tags in human readable units
  mm: support poison recovery from copy_present_page()
  mm: support poison recovery from do_cow_fault()
  resource, kunit: add test case for region_intersects()
  resource: make alloc_free_mem_region() works for iomem_resource
  mm: z3fold: deprecate CONFIG_Z3FOLD
  vfio/pci: implement huge_fault support
  mm/arm64: support large pfn mappings
  mm/x86: support large pfn mappings
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, smartpqi, NCR5380, mac_scsi, lpfc,
  mpi3mr).

  There are no user visible core changes and a whole series of minor
  updates and fixes. The largest core change is probably the
  simplification of the workqueue allocation path"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (86 commits)
  scsi: smartpqi: update driver version to 2.1.30-031
  scsi: smartpqi: fix volume size updates
  scsi: smartpqi: fix rare system hang during LUN reset
  scsi: smartpqi: add new controller PCI IDs
  scsi: smartpqi: add counter for parity write stream requests
  scsi: smartpqi: correct stream detection
  scsi: smartpqi: Add fw log to kdump
  scsi: bnx2fc: Remove some unused fields in struct bnx2fc_rport
  scsi: qla2xxx: Remove the unused 'del_list_entry' field in struct fc_port
  scsi: ufs: core: Remove ufshcd_urgent_bkops()
  scsi: core: Remove obsoleted declaration for scsi_driverbyte_string()
  scsi: bnx2i: Remove unused declarations
  scsi: core: Simplify an alloc_workqueue() invocation
  scsi: ufs: Simplify alloc*_workqueue() invocation
  scsi: stex: Simplify an alloc_ordered_workqueue() invocation
  scsi: scsi_transport_fc: Simplify alloc_workqueue() invocations
  scsi: snic: Simplify alloc_workqueue() invocations
  scsi: qedi: Simplify an alloc_workqueue() invocation
  scsi: qedf: Simplify alloc_workqueue() invocations
  scsi: myrs: Simplify an alloc_ordered_workqueue() invocation
  ...

Pull drm updates from Dave Airlie:
 "This adds a couple of patches outside the drm core, all should be
  acked appropriately, the string and pstore ones are the main ones that
  come to mind.

  Otherwise it's the usual drivers, xe is getting enabled by default on
  some new hardware, we've changed the device number handling to allow
  more devices, and we added some optional rust code to create QR codes
  in the panic handler, an idea first suggested I think 10 years ago :-)

  string:
   - add mem_is_zero()

  core:
   - support more device numbers
   - use XArray for minor ids
   - add backlight constants
   - Split dma fence array creation into alloc and arm

  fbdev:
   - remove usage of old fbdev hooks

  kms:
   - Add might_fault() to drm_modeset_lock priming
   - Add dynamic per-crtc vblank configuration support

  dma-buf:
   - docs cleanup

  buddy:
   - Add start address support for trim function

  printk:
   - pass description to kmsg_dump

  scheduler:
   - Remove full_recover from drm_sched_start

  ttm:
   - Make LRU walk restartable after dropping locks
   - Allow direct reclaim to allocate local memory

  panic:
   - add display QR code (in rust)

  displayport:
   - mst: GUID improvements

  bridge:
   - Silence error message on -EPROBE_DEFER
   - analogix: Clean aup
   - bridge-connector: Fix double free
   - lt6505: Disable interrupt when powered off
   - tc358767: Make default DP port preemphasis configurable
   - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
   - anx7625: simplify OF array handling
   - dw-hdmi: simplify clock handling
   - lontium-lt8912b: fix mode validation
   - nwl-dsi: fix mode vsync/hsync polarity

  xe:
   - Enable LunarLake and Battlemage support
   - Introducing Xe2 ccs modifiers for integrated and discrete graphics
   - rename xe perf to xe observation
   - use wb caching on DGFX for system memory
   - add fence timeouts
   - Lunar Lake graphics/media/display workarounds
   - Battlemage workarounds
   - Battlemage GSC support
   - GSC and HuC fw updates for LL/BM
   - use dma_fence_chain_free
   - refactor hw engine lookup and mmio access
   - enable priority mem read for Xe2
   - Add first GuC BMG fw
   - fix dma-resv lock
   - Fix DGFX display suspend/resume
   - Use xe_managed for kernel BOs
   - Use reserved copy engine for user binds on faulting devices
   - Allow mixing dma-fence jobs and long-running faulting jobs
   - fix media TLB invalidation
   - fix rpm in TTM swapout path
   - track resources and VF state by PF

  i915:
   - Type-C programming fix for MTL+
   - FBC cleanup
   - Calc vblank delay more accurately
   - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
   - Fix DP LTTPR detection
   - limit relocations to INT_MAX
   - fix long hangs in buddy allocator on DG2/A380

  amdgpu:
   - Per-queue reset support
   - SDMA devcoredump support
   - DCN 4.0.1 updates
   - GFX12/VCN4/JPEG4 updates
   - Convert vbios embedded EDID to drm_edid
   - GFX9.3/9.4 devcoredump support
   - process isolation framework for GFX 9.4.3/4
   - take IOMMU mappings into account for P2P DMA

  amdkfd:
   - CRIU fixes
   - HMM fix
   - Enable process isolation support for GFX 9.4.3/4
   - Allow users to target recommended SDMA engines
   - KFD support for targetting queues on recommended SDMA engines

  radeon:
   - remove .load and drm_dev_alloc
   - Fix vbios embedded EDID size handling
   - Convert vbios embedded EDID to drm_edid
   - Use GEM references instead of TTM
   - r100 cp init cleanup
   - Fix potential overflows in evergreen CS offset tracking

  msm:
   - DPU:
      - implement DP/PHY mapping on SC8180X
      - Enable writeback on SM8150, SC8180X, SM6125, SM6350
   - DP:
      - Enable widebus on all relevant chipsets
      - MSM8998 HDMI support
   - GPU:
      - A642L speedbin support
      - A615/A306/A621 support
      - A7xx devcoredump support

  ast:
   - astdp: Support AST2600 with VGA
   - Clean up HPD
   - Fix timeout loop for DP link training
   - reorganize output code by type (VGA, DP, etc)
   - convert to struct drm_edid
   - fix BMC handling for all outputs

  exynos:
   - drop stale MAINTAINERS pattern
   - constify struct

  loongson:
   - use GEM refcount over TTM

  mgag200:
   - Improve BMC handling
   - Support VBLANK intterupts
   - transparently support BMC outputs

  nouveau:
   - Refactor and clean up internals
   - Use GEM refcount over TTM's

  gm12u320:
   - convert to struct drm_edid

  gma500:
   - update i2c terms

  lcdif:
   - pixel clock fix

  host1x:
   - fix syncpoint IRQ during resume
   - use iommu_paging_domain_alloc()

  imx:
   - ipuv3: convert to struct drm_edid

  omapdrm:
   - improve error handling
   - use common helper for_each_endpoint_of_node()

  panel:
   - add support for BOE TV101WUM-LL2 plus DT bindings
   - novatek-nt35950: improve error handling
   - nv3051d: improve error handling
   - panel-edp:
      - add support for BOE NE140WUM-N6G
      - revert support for SDC ATNA45AF01
   - visionox-vtdr6130:
      - improve error handling
      - use devm_regulator_bulk_get_const()
   - boe-th101mb31ig002:
      - Support for starry-er88577 MIPI-DSI panel plus DT
      - Fix porch parameter
   - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
     NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
     CMN N116BCP-EA2, CSW MNB601LS1-4
   - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
   - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
   - jd9365da:
      - Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
      - Refactor for code sharing
   - panel-edp: fix name for HKC MB116AN01
   - jd9365da: fix "exit sleep" commands
   - jdi-fhd-r63452: simplify error handling with DSI multi-style
     helpers
   - mantix-mlaf057we51: simplify error handling with DSI multi-style
     helpers
   - simple:
      - support Innolux G070ACE-LH3 plus DT bindings
      - support On Tat Industrial Company KD50G21-40NT-A1 plus DT
        bindings
   - st7701:
      - decouple DSI and DRM code
      - add SPI support
      - support Anbernic RG28XX plus DT bindings

  mediatek:
   - support alpha blending
   - remove cl in struct cmdq_pkt
   - ovl adaptor fix
   - add power domain binding for mediatek DPI controller

  renesas:
   - rz-du: add support for RZ/G2UL plus DT bindings

  rockchip:
   - Improve DP sink-capability reporting
   - dw_hdmi: Support 4k@60Hz
   - vop:
      - Support RGB display on Rockchip RK3066
      - Support 4096px width

  sti:
   - convert to struct drm_edid

  stm:
   - Avoid UAF wih managed plane and CRTC helpers
   - Fix module owner
   - Fix error handling in probe
   - Depend on COMMON_CLK
   - ltdc:
      - Fix transparency after disabling plane
      - Remove unused interrupt

  tegra:
   - gr3d: improve PM domain handling
   - convert to struct drm_edid
   - Call drm_atomic_helper_shutdown()

  vc4:
   - fix PM during detect
   - replace DRM_ERROR() with drm_error()
   - v3d: simplify clock retrieval

  v3d:
   - Clean up perfmon

  virtio:
   - add DRM capset"

* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
  drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
  drm/xe/xe2hpg: Add Wa_15016589081
  drm/xe: Don't keep stale pointer to bo->ggtt_node
  drm/xe: fix missing 'xe_vm_put'
  drm/xe: fix build warning with CONFIG_PM=n
  drm/xe: Suppress missing outer rpm protection warning
  drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
  drm/amd/display: Add all planes on CRTC to state for overlay cursor
  drm/i915/bios: fix printk format width
  drm/i915/display: Fix BMG CCS modifiers
  drm/amdgpu: get rid of bogus includes of fdtable.h
  drm/amdkfd: CRIU fixes
  drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
  drm: new helper: drm_gem_prime_handle_to_dmabuf()
  drm/amdgpu/atomfirmware: Silence UBSAN warning
  drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
  drm/amd/amdgpu: apply command submission parser for JPEG v1
  drm/amd/amdgpu: apply command submission parser for JPEG v2+
  drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
  drm/amd/pm: update the features set on smu v14.0.2/3
  ...

Pull random number generator updates from Jason Donenfeld:
 "Originally I'd planned on sending each of the vDSO getrandom()
  architecture ports to their respective arch trees. But as we started
  to work on this, we found lots of interesting issues in the shared
  code and infrastructure, the fixes for which the various archs needed
  to base their work.

  So in the end, this turned into a nice collaborative effort fixing up
  issues and porting to 5 new architectures -- arm64, powerpc64,
  powerpc32, s390x, and loongarch64 -- with everybody pitching in and
  commenting on each other's code. It was a fun development cycle.

  This contains:

   - Numerous fixups to the vDSO selftest infrastructure, getting it
     running successfully on more platforms, and fixing bugs in it.

   - Additions to the vDSO getrandom & chacha selftests. Basically every
     time manual review unearthed a bug in a revision of an arch patch,
     or an ambiguity, the tests were augmented.

     By the time the last arch was submitted for review, s390x, v1 of
     the series was essentially fine right out of the gate.

   - Fixes to the the generic C implementation of vDSO getrandom, to
     build and run successfully on all archs, decoupling it from
     assumptions we had (unintentionally) made on x86_64 that didn't
     carry through to the other architectures.

   - Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
     Huacai Chen.

   - Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
     by Will Deacon.

   - Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
     varieties, from Christophe Leroy and acked by Michael Ellerman.

   - Port of vDSO getrandom to S390X from Heiko Carstens, the arch
     maintainer.

  While it'd be natural for there to be things to fix up over the course
  of the development cycle, these patches got a decent amount of review
  from a fairly diverse crew of folks on the mailing lists, and, for the
  most part, they've been cooking in linux-next, which has been helpful
  for ironing out build issues.

  In terms of architectures, I think that mostly takes care of the
  important 64-bit archs with hardware still being produced and running
  production loads in settings where vDSO getrandom is likely to help.

  Arguably there's still RISC-V left, and we'll see for 6.13 whether
  they find it useful and submit a port"

* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
  selftests: vDSO: check cpu caps before running chacha test
  s390/vdso: Wire up getrandom() vdso implementation
  s390/vdso: Move vdso symbol handling to separate header file
  s390/vdso: Allow alternatives in vdso code
  s390/module: Provide find_section() helper
  s390/facility: Let test_facility() generate static branch if possible
  s390/alternatives: Remove ALT_FACILITY_EARLY
  s390/facility: Disable compile time optimization for decompressor code
  selftests: vDSO: fix vdso_config for s390
  selftests: vDSO: fix ELF hash table entry size for s390x
  powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
  powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
  powerpc/vdso: Refactor CFLAGS for CVDSO build
  powerpc/vdso32: Add crtsavres
  mm: Define VM_DROPPABLE for powerpc/32
  powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
  selftests: vDSO: don't include generated headers for chacha test
  arm64: vDSO: Wire up getrandom() vDSO implementation
  arm64: alternative: make alternative_has_cap_likely() VDSO compatible
  selftests: vDSO: also test counter in vdso_test_chacha
  ...