Pull power supply fixes from Sebastian Reichel:
 "Three regression fixes for the 5.17 cycle:

   - build warning fix for power-supply documentation

   - pointer size fix in cw2015 battery driver

   - OOM handling in bq256xx charger driver"

* tag 'for-v5.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: bq256xx: Handle OOM correctly
  power: supply: core: fix application of sizeof to pointer
  power: supply: fix table problem in sysfs-class-power

Escape asterisk symbols to fix the following warning:

"WARNING: Inline emphasis start-string without end-string"

Fixes: c6807970c3bc ("soc: aspeed: Add UART routing support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220124014351.9121-1-chiawei_wang@aspeedtech.com
Link: https://lore.kernel.org/r/20220201070027.196314-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add a bottom table border to complete the table format and prevent
a documentation build warning.

Documentation/ABI/testing/sysfs-class-power:459: WARNING: Malformed table.
No bottom table border found.

Fixes: 1b0b6cc8030d0 ("power: supply: add charge_behaviour attributes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've tried to address some performance issues in
  f2fs_checkpoint and direct IO flows. Also, there was a work to enhance
  the page cache management used for compression. Other than them, we've
  done typical work including sysfs, code clean-ups, tracepoint, sanity
  check, in addition to bug fixes on corner cases.

  Enhancements:
   - use iomap for direct IO
   - try to avoid lock contention to improve f2fs_ckpt speed
   - avoid unnecessary memory allocation in compression flow
   - POSIX_FADV_DONTNEED drops the page cache containing compression
     pages
   - add some sysfs entries (gc_urgent_high_remaining, pending_discard)

  Bug fixes:
   - try not to expose unwritten blocks to user by DIO (this was added
     to avoid merge conflict; another patch is coming to address other
     missing case)
   - relax minor error condition for file pinning feature used in
     Android OTA
   - fix potential deadlock case in compression flow
   - should not truncate any block on pinned file

  In addition, we've done some code clean-ups and tracepoint/sanity
  check improvement"

* tag 'f2fs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
  f2fs: do not allow partial truncation on pinned file
  f2fs: remove redunant invalidate compress pages
  f2fs: Simplify bool conversion
  f2fs: don't drop compressed page cache in .{invalidate,release}page
  f2fs: fix to reserve space for IO align feature
  f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
  f2fs: support fault injection to f2fs_trylock_op()
  f2fs: clean up __find_inline_xattr() with __find_xattr()
  f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()
  f2fs: do not bother checkpoint by f2fs_get_node_info
  f2fs: avoid down_write on nat_tree_lock during checkpoint
  f2fs: compress: fix potential deadlock of compress file
  f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file
  f2fs: add gc_urgent_high_remaining sysfs node
  f2fs: fix to do sanity check in is_alive()
  f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
  f2fs: fix to do sanity check on inode type during garbage collection
  f2fs: avoid duplicate call of mark_inode_dirty
  f2fs: show number of pending discard commands
  f2fs: support POSIX_FADV_DONTNEED drop compressed page cache
  ...

Pull dmaengine updates from Vinod Koul:
 "A bunch of new support and few updates to drivers:

  New support:
   - DMA_MEMCPY_SG support is bought back as we have a user in Xilinx
     driver
   - Support for TI J721S2 SoC in k3-udma driver
   - Support for Ingenic MDMA and BDMA in the JZ4760
   - Support for Renesas r8a779f0 dmac

  Updates:
   - We are finally getting rid of slave_id, so this brings in the
     changes across tree for that
   - updates for idxd driver
   - at_xdmac driver cleanup"

* tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
  dt-bindings: dma-controller: Split interrupt fields in example
  dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API
  dmaengine: at_xdmac: Fix race over irq_status
  dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet()
  dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
  dmaengine: at_xdmac: Fix lld view setting
  dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
  dmaengine: at_xdmac: Fix concurrency over xfers_list
  dmaengine: at_xdmac: Move the free desc to the tail of the desc list
  dmaengine: at_xdmac: Fix race for the tx desc callback
  dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
  dmaengine: at_xdmac: Print debug message after realeasing the lock
  dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
  dmaengine: at_xdmac: Don't start transactions at tx_submit level
  dmaengine: idxd: deprecate token sysfs attributes for read buffers
  dmaengine: idxd: change bandwidth token to read buffers
  dmaengine: idxd: fix wq settings post wq disable
  dmaengine: idxd: change MSIX allocation based on per wq activation
  dmaengine: idxd: fix descriptor flushing locking
  dmaengine: idxd: embed irq_entry in idxd_wq struct
  ...

Pull virtio updates from Michael Tsirkin:
 "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes.

   - partial support for < MAX_ORDER - 1 granularity for virtio-mem

   - driver_override for vdpa

   - sysfs ABI documentation for vdpa

   - multiqueue config support for mlx5 vdpa

   - and misc fixes, cleanups"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits)
  vdpa/mlx5: Fix tracking of current number of VQs
  vdpa/mlx5: Fix is_index_valid() to refer to features
  vdpa: Protect vdpa reset with cf_mutex
  vdpa: Avoid taking cf_mutex lock on get status
  vdpa/vdpa_sim_net: Report max device capabilities
  vdpa: Use BIT_ULL for bit operations
  vdpa/vdpa_sim: Configure max supported virtqueues
  vdpa/mlx5: Report max device capabilities
  vdpa: Support reporting max device capabilities
  vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()
  vdpa: Add support for returning device configuration information
  vdpa/mlx5: Support configuring max data virtqueue
  vdpa/mlx5: Fix config_attr_mask assignment
  vdpa: Allow to configure max data virtqueues
  vdpa: Read device configuration only if FEATURES_OK
  vdpa: Sync calls set/get config/status with cf_mutex
  vdpa/mlx5: Distribute RX virtqueues in RQT object
  vdpa: Provide interface to read driver features
  vdpa: clean up get_config_size ret value handling
  virtio_ring: mark ring unused on error
  ...

`driver_override` allows to control which of the vDPA bus drivers
binds to a vDPA device.

If `driver_override` is not set, the previous behaviour is followed:
devices use the first vDPA bus driver loaded (unless auto binding
is disabled).

Tested on Fedora 34 with driverctl(8):
  $ modprobe virtio-vdpa
  $ modprobe vhost-vdpa
  $ modprobe vdpa-sim-net

  $ vdpa dev add mgmtdev vdpasim_net name dev1

  # dev1 is attached to the first vDPA bus driver loaded
  $ driverctl -b vdpa list-devices
    dev1 virtio_vdpa

  $ driverctl -b vdpa set-override dev1 vhost_vdpa

  $ driverctl -b vdpa list-devices
    dev1 vhost_vdpa [*]

  Note: driverctl(8) integrates with udev so the binding is
  preserved.

Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211126164753.181829-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Add missing documentation of sysfs ABI for vDPA bus in
the new Documentation/ABI/testing/sysfs-bus-vdpa file.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211126164753.181829-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Pull char/misc and other driver updates from Greg KH:
 "Here is the large set of char, misc, and other "small" driver
  subsystem changes for 5.17-rc1.

  Lots of different things are in here for char/misc drivers such as:

   - habanalabs driver updates

   - mei driver updates

   - lkdtm driver updates

   - vmw_vmci driver updates

   - android binder driver updates

   - other small char/misc driver updates

  Also smaller driver subsystems have also been updated, including:

   - fpga subsystem updates

   - iio subsystem updates

   - soundwire subsystem updates

   - extcon subsystem updates

   - gnss subsystem updates

   - phy subsystem updates

   - coresight subsystem updates

   - firmware subsystem updates

   - comedi subsystem updates

   - mhi subsystem updates

   - speakup subsystem updates

   - rapidio subsystem updates

   - spmi subsystem updates

   - virtual driver updates

   - counter subsystem updates

  Too many individual changes to summarize, the shortlog contains the
  full details.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
  counter: 104-quad-8: Fix use-after-free by quad8_irq_handler
  dt-bindings: mux: Document mux-states property
  dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC
  counter: remove old and now unused registration API
  counter: ti-eqep: Convert to new counter registration
  counter: stm32-lptimer-cnt: Convert to new counter registration
  counter: stm32-timer-cnt: Convert to new counter registration
  counter: microchip-tcb-capture: Convert to new counter registration
  counter: ftm-quaddec: Convert to new counter registration
  counter: intel-qep: Convert to new counter registration
  counter: interrupt-cnt: Convert to new counter registration
  counter: 104-quad-8: Convert to new counter registration
  counter: Update documentation for new counter registration functions
  counter: Provide alternative counter registration functions
  counter: stm32-timer-cnt: Convert to counter_priv() wrapper
  counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper
  counter: ti-eqep: Convert to counter_priv() wrapper
  counter: ftm-quaddec: Convert to counter_priv() wrapper
  counter: intel-qep: Convert to counter_priv() wrapper
  counter: microchip-tcb-capture: Convert to counter_priv() wrapper
  ...

Pull dax and libnvdimm updates from Dan Williams:
 "The bulk of this is a rework of the dax_operations API after
  discovering the obstacles it posed to the work-in-progress DAX+reflink
  support for XFS and other copy-on-write filesystem mechanics.

  Primarily the need to plumb a block_device through the API to handle
  partition offsets was a sticking point and Christoph untangled that
  dependency in addition to other cleanups to make landing the
  DAX+reflink support easier.

  The DAX_PMEM_COMPAT option has been around for 4 years and not only
  are distributions shipping userspace that understand the current
  configuration API, but some are not even bothering to turn this option
  on anymore, so it seems a good time to remove it per the deprecation
  schedule. Recall that this was added after the device-dax subsystem
  moved from /sys/class/dax to /sys/bus/dax for its sysfs organization.
  All recent functionality depends on /sys/bus/dax.

  Some other miscellaneous cleanups and reflink prep patches are
  included as well.

  Summary:

   - Simplify the dax_operations API:

      - Eliminate bdev_dax_pgoff() in favor of the filesystem
        maintaining and applying a partition offset to all its DAX iomap
        operations.

      - Remove wrappers and device-mapper stacked callbacks for
        ->copy_from_iter() and ->copy_to_iter() in favor of moving
        block_device relative offset responsibility to the
        dax_direct_access() caller.

      - Remove the need for an @bdev in filesystem-DAX infrastructure

      - Remove unused uio helpers copy_from_iter_flushcache() and
        copy_mc_to_iter() as only the non-check_copy_size() versions are
        used for DAX.

   - Prepare XFS for the pending (next merge window) DAX+reflink support

   - Remove deprecated DEV_DAX_PMEM_COMPAT support

   - Cleanup a straggling misuse of the GUID api"

* tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits)
  iomap: Fix error handling in iomap_zero_iter()
  ACPI: NFIT: Import GUID before use
  dax: remove the copy_from_iter and copy_to_iter methods
  dax: remove the DAXDEV_F_SYNC flag
  dax: simplify dax_synchronous and set_dax_synchronous
  uio: remove copy_from_iter_flushcache() and copy_mc_to_iter()
  iomap: turn the byte variable in iomap_zero_iter into a ssize_t
  memremap: remove support for external pgmap refcounts
  fsdax: don't require CONFIG_BLOCK
  iomap: build the block based code conditionally
  dax: fix up some of the block device related ifdefs
  fsdax: shift partition offset handling into the file systems
  dax: return the partition offset from fs_dax_get_by_bdev
  iomap: add a IOMAP_DAX flag
  xfs: pass the mapping flags to xfs_bmbt_to_iomap
  xfs: use xfs_direct_write_iomap_ops for DAX zeroing
  xfs: move dax device handling into xfs_{alloc,free}_buftarg
  ext4: cleanup the dax handling in ext4_fill_super
  ext2: cleanup the dax handling in ext2_fill_super
  fsdax: decouple zeroing from the iomap buffered I/O code
  ...