Pull block IO driver bits from Jens Axboe:
 "As I mentioned in the core block pull request, due to real life
  circumstances the driver pull request would be late.  Now it looks
  like -rc2 late...  On the plus side, apart form the rsxx update, these
  are all things that I could argue could go in later in the cycle as
  they are fixes and not features.  So even though things are late, it's
  not ALL bad.

  The pull request contains:

   - Updates to bcache, all bug fixes, from Kent.

   - A pile of drbd bug fixes (no big features this time!).

   - xen blk front/back fixes.

   - rsxx driver updates, some of them deferred form 3.10.  So should be
     well cooked by now"

* 'for-3.11/drivers' of git://git.kernel.dk/linux-block: (63 commits)
  bcache: Allocation kthread fixes
  bcache: Fix GC_SECTORS_USED() calculation
  bcache: Journal replay fix
  bcache: Shutdown fix
  bcache: Fix a sysfs splat on shutdown
  bcache: Advertise that flushes are supported
  bcache: check for allocation failures
  bcache: Fix a dumb race
  bcache: Use standard utility code
  bcache: Update email address
  bcache: Delete fuzz tester
  bcache: Document shrinker reserve better
  bcache: FUA fixes
  drbd: Allow online change of al-stripes and al-stripe-size
  drbd: Constants should be UPPERCASE
  drbd: Ignore the exit code of a fence-peer handler if it returns too late
  drbd: Fix rcu_read_lock balance on error path
  drbd: fix error return code in drbd_init()
  drbd: Do not sleep inside rcu
  bcache: Refresh usage docs
  ...

Pull x86 platform driver updates from Matthew Garrett:
 "Nothing overly exciting here - a couple of new drivers that don't do a
  great deal, along with some miscellaneous fixes and a couple of small
  feature enablement patches"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  x86 platform drivers: fix gpio leak
  toshiba_acpi: Add dependency on SERIO_I8042
  asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. 1015E/U
  Add trivial driver to disable Intel Smart Connect
  Add support driver for Intel Rapid Start Technology
  hp-wmi: add supports for POST code error
  asus-wmi: control wlan-led only if wapf == 4
  drivers/platform/x86/intel_ips: Convert to module_pci_driver
  asus-nb-wmi: ignore ALS notification key code
  asus-wmi: append newline to messages
  x86: asus-laptop: fix invalid point access
  x86: msi-laptop: fix memleak
  amilo-rfkill: Add dependency on SERIO_I8042
  dell-laptop: fix error return code in dell_init()
  hp-wmi: Enable hotkeys on some systems

Pull perf fixes from Thomas Gleixner:
 - fix for do_div() abuse on x86
 - locking fix in perf core
 - a pile of (build) fixes and cleanups in perf tools

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  perf/x86: Fix incorrect use of do_div() in NMI warning
  perf: Fix perf_lock_task_context() vs RCU
  perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario
  perf: Clone child context from parent context pmu
  perf script: Fix broken include in Context.xs
  perf tools: Fix -ldw/-lelf link test when static linking
  perf tools: Revert regression in configuration of Python support
  perf tools: Fix perf version generation
  perf stat: Fix per-socket output bug for uncore events
  perf symbols: Fix vdso list searching
  perf evsel: Fix missing increment in sample parsing
  perf tools: Update symbol_conf.nr_events when processing attribute events
  perf tools: Fix new_term() missing free on error path
  perf tools: Fix parse_events_terms() segfault on error path
  perf evsel: Fix count parameter to read call in event_format__new
  perf tools: fix a typo of a Power7 event name
  perf tools: Fix -x/--exclude-other option for report command
  perf evlist: Enhance perf_evlist__start_workload()
  perf record: Remove -f/--force option
  perf record: Remove -A/--append option
  ...

Pull InfiniBand/RDMA changes from Roland Dreier:
 - AF_IB (native IB addressing) for CMA from Sean Hefty
 - new mlx5 driver for Mellanox Connect-IB adapters (including post
   merge request fixes)
 - SRP fixes from Bart Van Assche (including fix to first merge request)
 - qib HW driver updates
 - resurrection of ocrdma HW driver development
 - uverbs conversion to create fds with O_CLOEXEC set
 - other small changes and fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits)
  mlx5: Return -EFAULT instead of -EPERM
  IB/qib: Log all SDMA errors unconditionally
  IB/qib: Fix module-level leak
  mlx5_core: Adjust hca_cap.uar_page_sz to conform to Connect-IB spec
  IB/srp: Let srp_abort() return FAST_IO_FAIL if TL offline
  IB/uverbs: Use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd()
  mlx5_core: Fixes for sparse warnings
  IB/mlx5: Make profile[] static in main.c
  mlx5: Fix parameter type of health_handler_t
  mlx5: Add driver for Mellanox Connect-IB adapters
  IB/core: Add reserved values to enums for low-level driver use
  IB/srp: Bump driver version and release date
  IB/srp: Make HCA completion vector configurable
  IB/srp: Maintain a single connection per I_T nexus
  IB/srp: Fail I/O fast if target offline
  IB/srp: Skip host settle delay
  IB/srp: Avoid skipping srp_reset_host() after a transport error
  IB/srp: Fix remove_one crash due to resource exhaustion
  IB/qib: New transmitter tunning settings for Dell 1.1 backplane
  IB/core: Fix error return code in add_port()
  ...

Pull media updates from Mauro Carvalho Chehab:
 "This series contain:
   - new i2c video drivers: ml86v7667 (video decoder),
                            ths8200 (video encoder)
   - a new video driver for EasyCap cards based on Fushicai USBTV007
   - Improved support for OF and embedded systems, with V4L2 async
     initialization and a better support for clocks
   - API cleanups on the ioctls used by the v4l2 debug tool
   - Lots of cleanups
   - As usual, several driver improvements and new cards additions
   - Revert two changesets that change the minimal symbol rate for
     stv0399, as request by Manu
   - Update MAINTAINERS and other files to point to my new e-mail"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (378 commits)
  MAINTAINERS & ABI: Update to point to my new email
  [media] stb0899: restore minimal rate to 5Mbauds
  [media] exynos4-is: Correct colorspace handling at FIMC-LITE
  [media] exynos4-is: Set valid initial format on FIMC.n subdevs
  [media] exynos4-is: Set valid initial format on FIMC-IS-ISP subdev pads
  [media] exynos4-is: Fix format propagation on FIMC-IS-ISP subdev
  [media] exynos4-is: Set valid initial format at FIMC-LITE
  [media] exynos4-is: Fix format propagation on FIMC-LITE.n subdevs
  [media] MAINTAINERS: Update S5P/Exynos FIMC driver entry
  [media] Documentation: Update driver's directory in video4linux/fimc.txt
  [media] exynos4-is: Change fimc-is firmware file names
  [media] exynos4-is: Add support for Exynos5250 MIPI-CSIS
  [media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driver
  [media] exynos4-is: Drop drvdata handling in fimc-lite for non-dt platforms
  [media] media: i2c: tvp514x: remove manual setting of subdev name
  [media] media: i2c: tvp7002: remove manual setting of subdev name
  [media] mem2mem: set missing v4l2_dev pointer
  [media] wl128x: add missing struct v4l2_device
  [media] tvp514x: Fix init seqeunce
  [media] saa7134: Fix sparse warnings by adding __user annotation
  ...

Pull module updates from Rusty Russell:
 "Nothing interesting.  Except the most embarrassing bugfix ever.  But
  let's ignore that"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: cleanup call chain.
  module: do percpu allocation after uniqueness check.  No, really!
  modules: don't fail to load on unknown parameters.
  ABI: Clarify when /sys/module/MODULENAME is created
  There is no /sys/parameters
  module: don't modify argument of module_kallsyms_lookup_name()

Intel Rapid Start Technology is a firmware-based suspend-to-disk
implementation. Once placed in S3, the device will wake once either a
timeout elapses or the battery reaches a critical level. It will then resume
to the firmware and copy the contents of RAM to a specialised partition, and
then power off the machine. If the user turns the machine back on the
firmware will copy the contents of the partition back to RAM and then resume
from S3 as normal.

This driver provides an interface for configuring the wakeup events and
timeout. It still requires firmware support and an appropriate suspend
partition.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>

Pull pwm changes from Thierry Reding:
 "A new driver supports driving PWM signals using the TPU unit found on
  various Renesas SoCs.  Furthermore support is added for the NXP
  PCA9685 LED controller.  Another big chunk is the sysfs interface
  which has been in the works for quite some time.

  The remaining patches are a random assortment of cleanups and fixes"

* tag 'for-3.11-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: pwm-tiehrpwm: Use clk_enable/disable instead clk_prepare/unprepare.
  pwm: pca9685: Fix wrong argument to set MODE1_SLEEP bit
  pwm: renesas-tpu: Add MODULE_ALIAS to make module auto loading work
  pwm: renesas-tpu: fix return value check in tpu_probe()
  pwm: Add Renesas TPU PWM driver
  pwm: Add sysfs interface
  pwm: Fill in missing .owner fields
  pwm: add pca9685 driver
  pwm: atmel-tcb: prepare clk before calling enable
  pwm: devm: alloc correct pointer size
  pwm: mxs: Let device core handle pinctrl
  MAINTAINERS: Update PWM subsystem entry

In the Power7 PMU guide:
https://www.power.org/documentation/commonly-used-metrics-for-performance-analysis/
PM_BRU_MPRED is referred to as PM_BR_MPRED.

It fixed the typo by changing the name of the event in kernel and
documentation accordingly.

This patch changes the ABI, there are some reasons I think it's ok:

- It is relatively new interface, specific to the Power7 platform.

- No tools that we know of actually use this interface at this point
 (none are listed near the interface).

- Users of this interface (eg oprofile users migrating to perf)
  would be more used to the "PM_BR_MPRED" rather than "PM_BRU_MPRED".

- These are in the ABI/testing at this point rather than ABI/stable,
  so hoping we have some wiggle room.

Signed-off-by: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Cc: icycoder@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Runzhen Wang <runzhew@clemson.edu>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1372407297-6996-2-git-send-email-runzhen@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As mchehab@redhat.com is no longer valid, update it to reflect
the new one.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>