Pull final round of SCSI updates from James Bottomley:
 "Sorry for the delay in this patch which was mostly caused by getting
  the merger of the mpt2/mpt3sas driver, which was seen as an essential
  item of maintenance work to do before the drivers diverge too much.
  Unfortunately, this caused a compile failure (detected by linux-next),
  which then had to be fixed up and incubated.

  In addition to the mpt2/3sas rework, there are updates from pm80xx,
  lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus
  an assortment of changes including some year 2038 issues, a fix for a
  remove before detach issue in some drivers and a couple of other minor
  issues"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  mpt3sas: fix inline markers on non inline function declarations
  sd: Clear PS bit before Mode Select.
  ibmvscsi: set max_lun to 32
  ibmvscsi: display default value for max_id, max_lun and max_channel.
  mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()
  scsi: pmcraid: replace struct timeval with ktime_get_real_seconds()
  mvumi: 64bit value for seconds_since1970
  be2iscsi: Fix bogus WARN_ON length check
  scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
  mpt3sas: Bump mpt3sas driver version to 09.102.00.00
  mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs
  mpt2sas, mpt3sas: Update the driver versions
  mpt3sas: setpci reset kernel oops fix
  mpt3sas: Added OEM Gen2 PnP ID branding names
  mpt3sas: Refcount fw_events and fix unsafe list usage
  mpt3sas: Refcount sas_device objects and fix unsafe list usage
  mpt3sas: sysfs attribute to report Backup Rail Monitor Status
  mpt3sas: Ported WarpDrive product SSS6200 support
  mpt3sas: fix for driver fails EEH, recovery from injected pci bus error
  mpt3sas: Manage MSI-X vectors according to HBA device type
  ...

Change st driver to allow enabling or disabling debug output
via sysfs file /sys/bus/scsi/drivers/st/debug_flag.

Previously the only way to enable debug output was:

1. loading the driver with the module parameter debug_flag=1
2. an ioctl call (this method was also the only way to dynamically
disable debug output).

To use the ioctl you need a second tape drive (if you are
actively testing the first tape drive) since a second process
cannot open the first tape drive if it is in use.

The this change is only functional if the value of the macro
DEBUG in st.c is a non-zero value (which it is by default).

Signed-off-by: Shane Seymour <shane.seymour@hpe.com>
Reviewed-by: Laurence Oberman <oberman.l@gmail.com>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

Pull HID updates from Jiri Kosina:
 "Highlights:

   - Intel Skylake Win8 precision touchpads support fixes/improvements
     from Mika Westerberg

   - Lenovo Yoga 2 quirk from Ritesh Raj Sarraf

   - potential uninitialized buffer access fix in HID core from Richard
     Purdie

   - Wacom Intuos and Wacom Cintiq 2 support improvements from Jason
     Gerecke and Ping Cheng

   - initiation of sysfs deprecation process for most of the roccat
     drivers, from the roccat support maintiner Stefan Achatz

   - quite a few device ID / quirk additions and small fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits)
  HID: logitech: Add support for G29
  HID: logitech: Simplify wheel detection scheme
  HID: wacom: Call 'wacom_query_tablet_data' only after 'hid_hw_start'
  HID: wacom: Fix ABS_MISC reporting for Cintiq Companion 2
  HID: wacom: Remove useless conditions from 'wacom_query_tablet_data'
  HID: wacom: fix Intuos wireless report id issue
  HID: fix some indenting issues
  HID: wacom: Expect 'touch_max' touches if HID_DG_CONTACTCOUNT not present
  HID: wacom: Tie cached HID_DG_CONTACTCOUNT indices to report ID
  HID: roccat: Fixed resubmit: Deprecating most Roccat sysfs attributes
  HID: wacom: Report full pressure range for Intuos, Cintiq 13HD Touch
  HID: wacom: Add support for Cintiq Companion 2
  HID: multitouch: Fetch feature reports on demand for Win8 devices
  HID: sensor-hub: Add quirk for Lenovo Yoga 2 with ITE Chips
  HID: usbhid: Fix for the WiiU adapter from Mayflash
  HID: corsair: boolify struct k90_led.removed
  HID: corsair: Add Corsair Vengeance K90 driver
  HID: hid-input: allow input_configured callback return errors
  HID: multitouch: Add suffix for HID_DG_TOUCHPAD
  HID: i2c-hid: Fill in physical device providing HID functionality
  ...

Pull security subsystem update from James Morris:
 "This is mostly maintenance updates across the subsystem, with a
  notable update for TPM 2.0, and addition of Jarkko Sakkinen as a
  maintainer of that"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (40 commits)
  apparmor: clarify CRYPTO dependency
  selinux: Use a kmem_cache for allocation struct file_security_struct
  selinux: ioctl_has_perm should be static
  selinux: use sprintf return value
  selinux: use kstrdup() in security_get_bools()
  selinux: use kmemdup in security_sid_to_context_core()
  selinux: remove pointless cast in selinux_inode_setsecurity()
  selinux: introduce security_context_str_to_sid
  selinux: do not check open perm on ftruncate call
  selinux: change CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default
  KEYS: Merge the type-specific data with the payload data
  KEYS: Provide a script to extract a module signature
  KEYS: Provide a script to extract the sys cert list from a vmlinux file
  keys: Be more consistent in selection of union members used
  certs: add .gitignore to stop git nagging about x509_certificate_list
  KEYS: use kvfree() in add_key
  Smack: limited capability for changing process label
  TPM: remove unnecessary little endian conversion
  vTPM: support little endian guests
  char: Drop owner assignment from i2c_driver
  ...

Pull power supply and reset updates from Sebastian Reichel:
 - new AXP20X USB Power driver
 - new Qualcomm SMBB driver
 - new TPS65217 Charger driver
 - BQ24257: add BQ24250/BQ24251 support
 - overhaul bq27x00 battery driver, rename to bq27xxx
 - misc fixes and cleanups

* tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
  power: bq27xxx_battery: Remove unneeded dependency in Kconfig
  power: bq27xxx_battery: move irq handler to i2c section
  power: bq27xxx_battery: fix platform probe
  twl4030_charger: add missing iio dependency
  power_supply: charger-manager: add missing of_node_put
  Documentation: power: bq24257: Document exported sysfs entries
  power: bq24257: Add various device-specific sysfs properties
  power: bq24257: Allow input current limit sysfs access
  power: bq24257: Add input DPM voltage threshold setting support
  power: bq24257: Add over voltage protection setting support
  power: bq24257: Add SW-based approach for Power Good determination
  power: bq24257: Allow manual setting of input current limit
  power: bq24257: Add bit definition for temp sense enable
  power: bq24257: Add basic support for bq24250/bq24251
  dt: power: bq24257-charger: Cover additional devices
  power: bq24257: Simplify bq24257_power_supply_init()
  power: bq24257: Use managed power supply register
  power: bq24257: Streamline input current limit setup
  power: bq24257: Remove IRQ config through stat-gpios
  power: bq27xxx_battery: fix signedness bug in bq27xxx_battery_read_health()
  ...

Pull f2fs updates from Jaegeuk Kim:
 "Most part of the patches include enhancing the stability and
  performance of in-memory extent caches feature.

  In addition, it introduces several new features and configurable
  points:
   - F2FS_GOING_DOWN_METAFLUSH ioctl to test power failures
   - F2FS_IOC_WRITE_CHECKPOINT ioctl to trigger checkpoint by users
   - background_gc=sync mount option to do gc synchronously
   - periodic checkpoints
   - sysfs entry to control readahead blocks for free nids

  And the following bug fixes have been merged.
   - fix SSA corruption by collapse/insert_range
   - correct a couple of gc behaviors
   - fix the results of f2fs_map_blocks
   - fix error case handling of volatile/atomic writes"

* tag 'for-f2fs-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (54 commits)
  f2fs: fix to skip shrinking extent nodes
  f2fs: fix error path of ->symlink
  f2fs: fix to clear GCed flag for atomic written page
  f2fs: don't need to submit bio on error case
  f2fs: fix leakage of inmemory atomic pages
  f2fs: refactor __find_rev_next_{zero}_bit
  f2fs: support fiemap for inline_data
  f2fs: flush dirty data for bmap
  f2fs: relocate the tracepoint for background_gc
  f2fs crypto: fix racing of accessing encrypted page among
  f2fs: export ra_nid_pages to sysfs
  f2fs: readahead for free nids building
  f2fs: support lower priority asynchronous readahead in ra_meta_pages
  f2fs: don't tag REQ_META for temporary non-meta pages
  f2fs: add a tracepoint for f2fs_read_data_pages
  f2fs: set GFP_NOFS for grab_cache_page
  f2fs: fix SSA updates resulting in corruption
  Revert "f2fs: do not skip dentry block writes"
  f2fs: add F2FS_GOING_DOWN_METAFLUSH to test power-failure
  f2fs: merge meta writes as many possible
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.4-rc1.  Lots of
  different driver and subsystem updates, hwtracing being the largest
  with the addition of some new platforms that are now supported.  Full
  details in the shortlog.

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits)
  fpga: socfpga: Fix check of return value of devm_request_irq
  lkdtm: fix ACCESS_USERSPACE test
  mcb: Destroy IDA on module unload
  mcb: Do not return zero on error path in mcb_pci_probe()
  mei: bus: set the device name before running fixup
  mei: bus: use correct lock ordering
  mei: Fix debugfs filename in error output
  char: ipmi: ipmi_ssif: Replace timeval with timespec64
  fpga: zynq-fpga: Fix issue with drvdata being overwritten.
  fpga manager: remove unnecessary null pointer checks
  fpga manager: ensure lifetime with of_fpga_mgr_get
  fpga: zynq-fpga: Change fw format to handle bin instead of bit.
  fpga: zynq-fpga: Fix unbalanced clock handling
  misc: sram: partition base address belongs to __iomem space
  coresight: etm3x: adding documentation for sysFS's cpu interface
  vme: 8-bit status/id takes 256 values, not 255
  fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000
  ARM: zynq: dt: Updated devicetree for Zynq 7000 platform.
  ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager.
  ver_linux: proc/modules, limit text processing to 'sed'
  ...

Pull staging driver updates from Greg KH:
 "Here's the big staging driver update for 4.4-rc1.  If you were
  disappointed for 4.3-rc1 that we didn't contribute enough changesets,
  you should be happy with this pull request of over 2400 patches.

  But overall we removed more lines of code than we added, which is nice
  to see.  Full details in the shortlog.

  All of these have been in linux-next for a while"

Greg, I've never been disappointed in how few commits Staging
contributes to the kernel..  Never.

* tag 'staging-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2431 commits)
  Staging: rtl8192u: ieee80211: added missing blank lines
  Staging: rtl8192u: ieee80211: removed unnecessary braces
  Staging: rtl8192u: ieee80211: corrected block comments
  Staging: rtl8192u: ieee80211: corrected indent
  Staging: rtl8192u: ieee80211: added missing spaces after if
  Staging: rtl8192u: ieee80211: added missing space around '='
  Staging: rtl8192u: ieee80211: fixed position of else statements
  Staging: rtl8192u: ieee80211: fixed open brace positions
  staging: rdma: ipath: Remove unneeded vairable.
  staging: rtl8188eu: pwrGrpCnt variable removed in store_pwrindex_offset function
  staging: rtl8188eu: new variable for hal_data->MCSTxPowerLevelOriginalOffset[pwrGrpCnt] in store_pwrindex_offset function
  staging: rtl8188eu: checkpatch fixes: 'Avoid CamelCase' in hal/bb_cfg.c
  staging: rtl8188eu: checkpatch fixes: line over 80 characters splited into two parts
  staging: rtl8188eu: checkpatch fixes: alignment should match open parenthesis
  staging: rtl8188eu: checkpatch fixes: unnecessary parentheses removed in hal/bb_cfg.c
  staging: rtl8188eu: checkpatch fixes: spaces preferred around that '|' in hal/bb_cfg.c
  staging: rtl8188eu: operator = replaced by += in loop increment
  staging: rtl8188eu: occurrence of the 5 GHz code marked
  staging: rtl8188eu: increment placed into for loop header
  staging: rtl8188eu: while loop replaced by for loop in rtw_restruct_wmm_ie
  ...

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.4-rc1.

  As usual, most of the changes are in the gadget subsystem, and we
  removed a host controller for a device that is no longer in existance,
  and probably never was even made public.  There is also other minor
  driver updates and new device ids, full details in the changelog.

  All of these have been in linux-next for a while"

* tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits)
  USB: core: Codestyle fix in urb.c
  usb: misc: usb3503: Use i2c_add_driver helper macro
  usb: host: lpc32xx: don't unregister phy device
  usb: host: lpc32xx: balance clk enable/disable on removal
  usb: host: lpc32xx: fix warnings caused by enabling unprepared clock
  uwb: drp: Use setup_timer
  uwb: neh: Use setup_timer
  uwb: rsv: Use setup_timer
  USB: qcserial: add Sierra Wireless MC74xx/EM74xx
  usb: chipidea: otg: don't wait vbus drops below BSV when starts host
  chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE()
  doc: dt-binding: ci-hdrc-usb2: split vendor specific properties
  usb: chipidea: imx: add imx6ul usb support
  doc: dt-binding: ci-hdrc-usb2: improve property description
  usb: chipidea: imx: add usb support for imx7d
  Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry
  usb: chipidea: Add support for 'phy-clkgate-delay-us' property
  usb: chipidea: Use extcon framework for VBUS and ID detect
  usb: gadget: net2280: restore ep_cfg after defect7374 workaround
  usb: dwc2: host: Fix use after free w/ simultaneous irqs
  ...