linux.git/Documentation/ABI/testing, branch v3.17

Merge tag 'xfs-for-linus-3.17-rc1' of git://oss.sgi.com/xfs/xfs

2014-08-13T23:49:53+00:00

Pull xfs update from Dave Chinner:
 "This update contains:
   - conversion of the XFS core to pass negative error numbers
   - restructing of core XFS code that is shared with userspace to
     fs/xfs/libxfs
   - introduction of sysfs interface for XFS
   - bulkstat refactoring
   - demand driven speculative preallocation removal
   - XFS now always requires 64 bit sectors to be configured
   - metadata verifier changes to ensure CRCs are calculated during log
     recovery
   - various minor code cleanups
   - miscellaneous bug fixes

  The diffstat is kind of noisy because of the restructuring of the code
  to make kernel/userspace code sharing simpler, along with the XFS wide
  change to use the standard negative error return convention (at last!)"

* tag 'xfs-for-linus-3.17-rc1' of git://oss.sgi.com/xfs/xfs: (45 commits)
  xfs: fix coccinelle warnings
  xfs: flush both inodes in xfs_swap_extents
  xfs: fix swapext ilock deadlock
  xfs: kill xfs_vnode.h
  xfs: kill VN_MAPPED
  xfs: kill VN_CACHED
  xfs: kill VN_DIRTY()
  xfs: dquot recovery needs verifiers
  xfs: quotacheck leaves dquot buffers without verifiers
  xfs: ensure verifiers are attached to recovered buffers
  xfs: catch buffers written without verifiers attached
  xfs: avoid false quotacheck after unclean shutdown
  xfs: fix rounding error of fiemap length parameter
  xfs: introduce xfs_bulkstat_ag_ichunk
  xfs: require 64-bit sector_t
  xfs: fix uflags detection at xfs_fs_rm_xquota
  xfs: remove XFS_IS_OQUOTA_ON macros
  xfs: tidy up xfs_set_inode32
  xfs: allow inode allocations in post-growfs disk space
  xfs: mark xfs_qm_quotacheck as static
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client

2014-08-13T23:43:29+00:00

Pull Ceph updates from Sage Weil:
 "There is a lot of refactoring and hardening of the libceph and rbd
  code here from Ilya that fix various smaller bugs, and a few more
  important fixes with clone overlap.  The main fix is a critical change
  to the request_fn handling to not sleep that was exposed by the recent
  mutex changes (which will also go to the 3.16 stable series).

  Yan Zheng has several fixes in here for CephFS fixing ACL handling,
  time stamps, and request resends when the MDS restarts.

  Finally, there are a few cleanups from Himangi Saraogi based on
  Coccinelle"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (39 commits)
  libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly
  rbd: remove extra newlines from rbd_warn() messages
  rbd: allocate img_request with GFP_NOIO instead GFP_ATOMIC
  rbd: rework rbd_request_fn()
  ceph: fix kick_requests()
  ceph: fix append mode write
  ceph: fix sizeof(struct tYpO *) typo
  ceph: remove redundant memset(0)
  rbd: take snap_id into account when reading in parent info
  rbd: do not read in parent info before snap context
  rbd: update mapping size only on refresh
  rbd: harden rbd_dev_refresh() and callers a bit
  rbd: split rbd_dev_spec_update() into two functions
  rbd: remove unnecessary asserts in rbd_dev_image_probe()
  rbd: introduce rbd_dev_header_info()
  rbd: show the entire chain of parent images
  ceph: replace comma with a semicolon
  rbd: use rbd_segment_name_free() instead of kfree()
  ceph: check zero length in ceph_sync_read()
  ceph: reset r_resend_mds after receiving -ESTALE
  ...

Merge tag 'for-linus-20140808' of git://git.infradead.org/linux-mtd

2014-08-09T01:13:21+00:00

Pull MTD updates from Brian Norris:
 "AMD-compatible CFI driver:
   - Support OTP programming for Micron M29EW family
   - Increase buffer write timeout, according to detected flash
     parameter info

  NAND
   - Add helpers for retrieving ONFI timing modes
   - GPMI: provide option to disable bad block marker swapping (required
     for Ka-On electronics platforms)

  SPI NOR
   - EON EN25QH128 support
   - Support new Flag Status Register (FSR) on a few Micron flash

  Common
   - New sysfs entries for bad block and ECC stats

  And a few miscellaneous refactorings, cleanups, and driver
  improvements"

* tag 'for-linus-20140808' of git://git.infradead.org/linux-mtd: (31 commits)
  mtd: gpmi: make blockmark swapping optional
  mtd: gpmi: remove line breaks from error messages and improve wording
  mtd: gpmi: remove useless (void *) type casts and spaces between type casts and variables
  mtd: atmel_nand: NFC: support multiple interrupt handling
  mtd: atmel_nand: implement the nfc_device_ready() by checking the R/B bit
  mtd: atmel_nand: add NFC status error check
  mtd: atmel_nand: make ecc parameters same as definition
  mtd: nand: add ONFI timing mode to nand_timings converter
  mtd: nand: define struct nand_timings
  mtd: cfi_cmdset_0002: fix do_write_buffer() timeout error
  mtd: denali: use 8 bytes for READID command
  mtd/ftl: fix the double free of the buffers allocated in build_maps()
  mtd: phram: Fix whitespace issues
  mtd: spi-nor: add support for EON EN25QH128
  mtd: cfi_cmdset_0002: Add support for locking OTP memory
  mtd: cfi_cmdset_0002: Add support for writing OTP memory
  mtd: cfi_cmdset_0002: Invalidate cache after entering/exiting OTP memory
  mtd: cfi_cmdset_0002: Add support for reading OTP
  mtd: spi-nor: add support for flag status register on Micron chips
  mtd: Account for BBT blocks when a partition is being allocated
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2014-08-09T00:39:48+00:00

Pull input updates from Dmitry Torokhov:
 - big update to Wacom driver by Benjamin Tissoires, converting it to
   HID infrastructure and unifying USB and Bluetooth models
 - large update to ALPS driver by Hans de Goede, which adds support for
   newer touchpad models as well as cleans up and restructures the code
 - more changes to Atmel MXT driver, including device tree support
 - new driver for iPaq x3xxx touchscreen
 - driver for serial Wacom tablets
 - driver for Microchip's CAP1106
 - assorted cleanups and improvements to existing drover and input core

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits)
  Input: wacom - update the ABI doc according to latest changes
  Input: wacom - only register once the MODULE_* macros
  Input: HID - remove hid-wacom Bluetooth driver
  Input: wacom - add copyright note and bump version to 2.0
  Input: wacom - remove passing id for wacom_set_report
  Input: wacom - check for bluetooth protocol while setting OLEDs
  Input: wacom - handle Intuos 4 BT in wacom.ko
  Input: wacom - handle Graphire BT tablets in wacom.ko
  Input: wacom - prepare the driver to include BT devices
  Input: hyperv-keyboard - register as a wakeup source
  Input: imx_keypad - remove ifdef round PM methods
  Input: jornada720_ts - get rid of space indentation and use tab
  Input: jornada720_ts - switch to using managed resources
  Input: alps - Rushmore and v7 resolution support
  Input: mcs5000_ts - remove ifdef around power management methods
  Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
  Input: ads7846 - release resources on failure for clean exit
  Input: wacom - add support for 0x12C ISDv4 sensor
  Input: atmel_mxt_ts - use deep sleep mode when stopped
  ARM: dts: am437x-gp-evm: Update binding for touchscreen size
  ...

Merge branch 'akpm' (second patchbomb from Andrew Morton)

2014-08-08T22:57:47+00:00

Merge more incoming from Andrew Morton:
 "Two new syscalls:

     memfd_create in "shm: add memfd_create() syscall"
     kexec_file_load in "kexec: implementation of new syscall kexec_file_load"

  And:

   - Most (all?) of the rest of MM

   - Lots of the usual misc bits

   - fs/autofs4

   - drivers/rtc

   - fs/nilfs

   - procfs

   - fork.c, exec.c

   - more in lib/

   - rapidio

   - Janitorial work in filesystems: fs/ufs, fs/reiserfs, fs/adfs,
     fs/cramfs, fs/romfs, fs/qnx6.

   - initrd/initramfs work

   - "file sealing" and the memfd_create() syscall, in tmpfs

   - add pci_zalloc_consistent, use it in lots of places

   - MAINTAINERS maintenance

   - kexec feature work"

* emailed patches from Andrew Morton

nilfs2: add /sys/fs/nilfs2//mounted_snapshots/ group

2014-08-08T22:57:21+00:00

This patch adds creation of  group for every mounted
snapshot in /sys/fs/nilfs2//mounted_snapshots group.

The group contains details about mounted snapshot:
(1) inodes_count - show number of inodes for snapshot.
(2) blocks_count - show number of blocks for snapshot.

Signed-off-by: Vyacheslav Dubeyko 
Cc: Vyacheslav Dubeyko 
Cc: Ryusuke Konishi 
Cc: Michael L. Semon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: add /sys/fs/nilfs2//mounted_snapshots group

2014-08-08T22:57:21+00:00

This patch adds creation of /sys/fs/nilfs2//mounted_snapshots
group.

The mounted_snapshots group contains group for every
mounted snapshot.

Signed-off-by: Vyacheslav Dubeyko 
Cc: Vyacheslav Dubeyko 
Cc: Ryusuke Konishi 
Cc: Michael L. Semon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: add /sys/fs/nilfs2//checkpoints group

2014-08-08T22:57:21+00:00

This patch adds creation of /sys/fs/nilfs2//checkpoints
group.

The checkpoints group contains attributes that describe
details about volume's checkpoints:
(1) checkpoints_number - show number of checkpoints on volume.
(2) snapshots_number - show number of snapshots on volume.
(3) last_seg_checkpoint - show checkpoint number of the latest segment.
(4) next_checkpoint - show next checkpoint number.

Signed-off-by: Vyacheslav Dubeyko 
Cc: Vyacheslav Dubeyko 
Cc: Ryusuke Konishi 
Cc: Michael L. Semon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: add /sys/fs/nilfs2//segments group

2014-08-08T22:57:20+00:00

This patch adds creation of /sys/fs/nilfs2//segments
group.

The segments group contains attributes that describe
details about volume's segments:
(1) segments_number - show number of segments on volume.
(2) blocks_per_segment - show number of blocks in segment.
(3) clean_segments - show count of clean segments.
(4) dirty_segments - show count of dirty segments.

Signed-off-by: Vyacheslav Dubeyko 
Cc: Vyacheslav Dubeyko 
Cc: Ryusuke Konishi 
Cc: Michael L. Semon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

nilfs2: add /sys/fs/nilfs2//segctor group

2014-08-08T22:57:20+00:00

This patch adds creation of /sys/fs/nilfs2//segctor
group.

The segctor group contains attributes that describe
segctor thread activity details:
(1) last_pseg_block - show start block number of the latest segment.
(2) last_seg_sequence - show sequence value of the latest segment.
(3) last_seg_checkpoint - show checkpoint number of the latest segment.
(4) current_seg_sequence - show segment sequence counter.
(5) current_last_full_seg - show index number of the latest full segment.
(6) next_full_seg - show index number of the full segment index
to be used next.
(7) next_pseg_offset - show offset of next partial segment in
the current full segment.
(8) next_checkpoint - show next checkpoint number.
(9) last_seg_write_time - show write time of the last segment
in human-readable format.
(10) last_seg_write_time_secs - show write time of the last segment
in seconds.
(11) last_nongc_write_time - show write time of the last segment
not for cleaner operation in human-readable format.
(12) last_nongc_write_time_secs - show write time of the last segment
not for cleaner operation in seconds.
(13) dirty_data_blocks_count - show number of dirty data blocks.

Signed-off-by: Vyacheslav Dubeyko 
Cc: Vyacheslav Dubeyko 
Cc: Ryusuke Konishi 
Cc: Michael L. Semon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds