Pull smb client fixes from Steve French:
 - Fix leak in cifs_close_deferred_file()
 - Fix resolving MacOS symlinks
 - Fix stale file size in readdir
 - Update git branches in MAINTAINERS file
 - Fix bounds check in cifs_filldir
 - Fix checks in parse_dfs_referrals()
 - Fix DFS referral checks for malformed packet

* tag 'v7.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths
  cifs: prevent readdir from changing file size due to stale directory metadata
  smb: client: handle STATUS_STOPPED_ON_SYMLINK responses without a symlink target
  Add missing git branch info for cifs and ksmbd to MAINTAINERS file
  smb: client: bound dirent name against end of SMB response in cifs_filldir
  smb: client: validate DFS referral PathConsumed

Pull networking fixes from Jakub Kicinski:
 "Lots of fixes, double the count even for the 'new normal'. Largely due
  to my time off followed by a networking conference which distracted
  most maintainers (less so the AI generators).

  Including fixes from Bluetooth and WiFi.

  Current release - regressions:

   - wifi: mt76: fix MAC address for non OF pcie cards

  Current release - new code bugs:

   - mptcp: fix BUILD_BUG_ON on legacy ARM config

   - wifi: cfg80211: guard optional PMSR nominal time

  Previous releases - regressions:

   - qrtr: ns: raise node count limit to 512, we arbitrarily picked
     256 as a limit, turns out it was too low for real world deployments

   - vhost-net: fix TX stall when vhost owns virtio-net header

   - eth: amd-xgbe: fix MAC_AUTO_SW handling in CL37 AN

   - wifi: ath12k: fix low MLO RX throughput on WCN7850

  Previous releases - always broken:

   - number of random AI fixes for SCTP, RDS and TIPC protocols

   - more AI-looking fixes for WiFi drivers

   - number of fixes for missing pointer reloading after skb pull

   - reject BPF redirect use from qdisc qevent block

   - tcp: initialize standalone TCP-AO response padding

   - vsock/virtio: collapse receive queue under memory pressure to avoid
     client OOMing the host with tiny messages

   - ipv4: icmp: fill flow parameters in icmp_route_lookup decoy lookup,
     make sure the ICMP response routing follows the routing policy

   - gro: fix double aggregation of flush-marked skbs

   - ovpn: fix various refcount bugs

   - tls: device: push pending open record on splice EOF

   - eth: mlx5:
      - use sender devcom for MPV master-up
      - fix MCIA register buffer overflow on 32 dword reads"

* tag 'net-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (234 commits)
  drop_monitor: perform u64_stats updates under IRQ-disabled section
  drop_monitor: fix size calculations for 64-bit attributes
  net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
  mptcp: fix BUILD_BUG_ON on legacy ARM config
  selftests: mptcp: userspace_pm: fix undefined variable port
  mptcp: fix stale skb->sk reference on subflow close
  mptcp: pm: userspace: fix use-after-free in get_local_id
  mptcp: decrement subflows counter on failed passive join
  mac802154: hold an interface reference across the scan worker
  sctp: don't free the ASCONF's own transport in DEL-IP processing
  phonet: check register_netdevice_notifier() error in phonet_device_init()
  phonet: pep: fix use-after-free in pep_get_sb()
  bnge/bng_re: fix ring ID widths
  tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
  net: airoha: fix ETS channel derivation in airoha_tc_setup_qdisc_ets()
  mctp: check register_netdevice_notifier() error in mctp_device_init()
  ptp: netc: explicitly clear TMR_OFF during initialization
  rds: tcp: unregister sysctl before tearing down listen socket
  ipv6: Change allocation flags to match rcu_read_lock section requirements
  net: slip: serialize receive against buffer reallocation
  ...

Eric Dumazet says:

====================
drop_monitor: take care of 32bit kernels

This series fixes two drop_monitor issues on 32-bit architectures:

- Patch 1 uses nla_total_size_64bit() for PC and TIMESTAMP attributes to
  account for alignment padding added by nla_put_u64_64bit(), avoiding
  potential skb_over_panic() crashes.

- Patch 2 moves u64_stats updates before spin_unlock_irqrestore(), ensuring
  local interrupts are disabled to prevent seqcount corruption from nested
  interrupts in probe context.
====================

Link: https://patch.msgid.link/20260722141743.3266924-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In net_dm_packet_trace_kfree_skb_hit() and net_dm_hw_trap_packet_probe(),
u64_stats_update_begin() / u64_stats_inc() / u64_stats_update_end() were
called after spin_unlock_irqrestore(&...drop_queue.lock, flags), when local
IRQs had already been re-enabled.

Tracepoint probes can execute in IRQ or softirq context. On 32-bit
architectures, u64_stats_update_begin() disables preemption but not interrupts,
relying on seqcount writes. If a nested interrupt occurs on the same CPU during
the 64-bit stats update, the reentrant seqcount update can corrupt the
seqcount state or stats value.

Fix this by performing the 64-bit per-CPU stats update before releasing
drop_queue.lock via spin_unlock_irqrestore(), ensuring local interrupts remain
disabled during the u64_stats update.

Fixes: e9feb58020f9 ("drop_monitor: Expose tail drop counter")
Fixes: 5e58109b1ea4 ("drop_monitor: Add support for packet alert mode for hardware drops")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260722141743.3266924-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).

On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.

However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.

This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.

Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations.

Fixes: ca30707dee2b ("drop_monitor: Add packet alert mode")
Fixes: 5e58109b1ea4 ("drop_monitor: Add support for packet alert mode for hardware drops")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260722141743.3266924-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code
the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload
before overwriting it with skb_copy_bits().

skb_put() reserves nla_total_size(payload_len), i.e. the header plus the
NLA_ALIGN() padding, but only payload_len bytes are copied in. When
payload_len is not a multiple of 4 the 1-3 padding bytes are never
initialized and are leaked to user space inside the netlink message.

KMSAN confirms the leak for the software path when the packet payload
length is not 4-byte aligned:

  BUG: KMSAN: kernel-infoleak in _copy_to_iter
   _copy_to_iter
   __skb_datagram_iter
   skb_copy_datagram_iter
   netlink_recvmsg
   sock_recvmsg
   __sys_recvfrom
  Uninit was created at:
   kmem_cache_alloc_node_noprof
   __alloc_skb
   net_dm_packet_work
  Bytes 173-175 of 176 are uninitialized

Use __nla_reserve(), which sets up the attribute header and zeroes the
padding, instead of open coding the attribute construction.

Fixes: ca30707dee2b ("drop_monitor: Add packet alert mode")
Fixes: 5e58109b1ea4 ("drop_monitor: Add support for packet alert mode for hardware drops")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260722122817.5548-1-yhlee@isslab.korea.ac.kr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: misc fixes for v7.2-rc5

Here are various unrelated fixes:

- Patch 1: decrement extra subflows counter in case of errors with
  passive MP_JOIN. A fix for v5.7.

- Patch 2: fix use-after-free in userspace_pm_get_local_id. A fix for
  v5.19.

- Patch 3: fix stale skb->sk reference on subflow close, in case of
  concurrent read operation. A fix for v6.19.

- Patch 4: wait on the correct port in the userspace_pm.sh selftest. A
  fix for v6.19.

- Patch 5: fix a BUILD_BUG_ON on legacy ARM config. A fix for v7.1.
====================

Link: https://patch.msgid.link/20260722-net-mptcp-misc-fixes-7-2-rc5-v1-0-6fb595bc86ef@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The 0-day bot managed to find kernel configs that cause build failures,
e.g. when using the StrongARM SA1100 target (ARMv4).

On such legacy ARM architecture, all structures are apparently aligned
to 32 bits, causing build issue here. Indeed, on such architecture,
'flags' size is not equivalent to sizeof(u16) as expected, but to
sizeof(u32).

Instead, use memset(). It was not used before to ensure a simple clear
operation was used by the compiler. But at the end, it shouldn't matter,
and the compiler should optimise this to the same operation with or
without memset() when -O above 0 is used. So let's switch to memset() to
fix this issue, and reduce this complexity.

Fixes: 5e939544f9d2 ("mptcp: fix uninit-value in mptcp_established_options")
Cc: stable@vger.kernel.org
Suggested-by: Frank Ranner <frank.ranner@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605312026.Srgsz7Tp-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202607031100.upQfRZTM-lkp@intel.com/
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260722-net-mptcp-misc-fixes-7-2-rc5-v1-5-6fb595bc86ef@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In make_connection(), the variable "port" is used but never defined.
This leads to an empty argument being passed to wait_local_port_listen(),
causing "printf: : invalid number" errors:

 # INFO: Init
 # 01 Created network namespaces ns1, ns2                          [ OK ]
 # INFO: Make connections
 # ./../lib.sh: line 651: printf: : invalid number
 # 02 Established IPv4 MPTCP Connection ns2 => ns1                 [ OK ]
 # INFO: Connection info: 10.0.1.2:59516 -> 10.0.1.1:50002
 # ./../lib.sh: line 651: printf: : invalid number
 # 03 Established IPv6 MPTCP Connection ns2 => ns1                 [ OK ]

Fix it by using the correctly defined variable "app_port", which holds the
appropriate port number for the connection.

Fixes: 39348f5f2f13 ("selftests: mptcp: wait for port instead of sleep")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260722-net-mptcp-misc-fixes-7-2-rc5-v1-4-6fb595bc86ef@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The backlog list is updated by mptcp_data_ready() under
mptcp_data_lock(). The cleanup of backlog references to a closing
subflow, however, was performed in mptcp_close_ssk(), before
__mptcp_close_ssk() acquires the ssk lock, and while holding neither
the ssk lock nor mptcp_data_lock().

Because that traversal ran without mptcp_data_lock(), concurrent softirq
RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready()
-> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog
entry referencing the ssk while the cleanup loop was in progress. Such
an entry could be missed by the cleanup, or the concurrent list update
could corrupt the traversal, leaving skb->sk pointing at the ssk after
it is freed.

A later mptcp_backlog_purge() then dereferences the stale pointer,
triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0)
followed by a use-after-free in mptcp_backlog_purge().

Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after
subflow->closing is set to 1 and while the ssk lock is still held,
serialized under mptcp_data_lock(). The cleanup runs only on the push
path (MPTCP_CF_PUSH), where backlog references accumulate; on other
teardown paths the caller already handles cleanup.

With subflow->closing set and mptcp_data_lock() held across the purge,
any concurrent mptcp_data_ready() either completes its enqueue before
the purge runs and is caught, or observes closing=1 and bails out. Once
mptcp_data_unlock() is reached, no new skb referencing the ssk can be
enqueued, so the cleanup is exhaustive.

Remove the unprotected traversal from mptcp_close_ssk() entirely.

Fixes: ee458a3f314e ("mptcp: introduce mptcp-level backlog")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reported-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/621
Signed-off-by: Kalpan Jani <kalpan.jani@mpiricsoftware.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260722-net-mptcp-misc-fixes-7-2-rc5-v1-3-6fb595bc86ef@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>