| Age | Commit message (Collapse) | Author |
|---|
|
Fix various Hyper-V selftests to use gpa_t for variables that contain
guest physical addresses, rather than gva_t. In practice, the bugs are
benign as both gva_t and gpa_t are u64 typedefs, i.e. gpa_t and gva_t are
interchangeable from a functional perspective, the code is just confusing.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: call out that both are u64 typedefs]
Link: https://patch.msgid.link/20260420212004.3938325-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace all occurrences of vm_paddr_t with gpa_t to align with KVM code
and with the conversion helpers (e.g. addr_hva2gpa()).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/vm_paddr_/gpa_/g'
Then by manually adjusting whitespace to make checkpatch.pl happy.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: drop bogus changelog blurb about renaming functions]
Link: https://patch.msgid.link/20260420212004.3938325-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace all occurrences of vm_vaddr_t with gva_t to align with KVM code
and with the conversion helpers (e.g. addr_gva2hva()).
This commit was generated with the following command:
git ls-files tools/testing/selftests/kvm | xargs sed -i 's/vm_vaddr_/gva_/g'
Then by manually adjusting whitespace to make checkpatch.pl happy, and
dropping renames of functions that allocate memory within a given VM.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
[sean: drop renames of allocator APIs]
Link: https://patch.msgid.link/20260420212004.3938325-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The logfile contains a lot of useful information about the tests being
run. Add it to the stored failure directory when the test fails.
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Link: https://patch.msgid.link/20260420142315.7bbc3624@fedora
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The Perl localtime() function returns the month starting at 0 not 1. This
caused the date produced to create the directory for saving files of a
failed run to have the month off by one.
machine-test-useconfig-fail-20260314073628
The above happened in April, not March. The correct name should have been:
machine-test-useconfig-fail-20260414073628
This was somewhat confusing.
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Link: https://patch.msgid.link/20260420142426.33ad0293@fedora
Fixes: 7faafbd69639b ("ktest: Add open and close console and start stop monitor")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"The usual collection of driver changes, more core infrastructure
updates that typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa,
ocrdma, erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in
core
- Promote UMEM to a core component, split out DMA block iterator
logic
- Introduce FRMR pools with aging, statistics, pinned handles, and
netlink control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in
irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
Fixes:
- IB/core zero dmac neighbor resolution race
- GID table memory free
- rxe pad/ICRC validation and r_key async errors
- mlx4 external umem for CQ
- umem DMA attributes on unmap
- mana_ib RX steering on RSS QP destroy"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (116 commits)
RDMA/core: Fix user CQ creation for drivers without create_cq
RDMA/ionic: bound node_desc sysfs read with %.64s
IB/core: Fix zero dmac race in neighbor resolution
RDMA/mana_ib: Support memory windows
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
RDMA/core: Prefer NLA_NUL_STRING
RDMA/core: Fix memory free for GID table
RDMA/hns: Remove the duplicate calls to ib_copy_validate_udata_in()
RDMA: Remove redundant = {} for udata req structs
RDMA/irdma: Add missing comp_mask check in alloc_ucontext
RDMA/hns: Add missing comp_mask check in create_qp
RDMA/mlx5: Pull comp_mask validation into ib_copy_validate_udata_in_cm()
RDMA: Use ib_copy_validate_udata_in_cm() for zero comp_mask
RDMA/hns: Use ib_copy_validate_udata_in()
RDMA/mlx4: Use ib_copy_validate_udata_in() for QP
RDMA/mlx4: Use ib_copy_validate_udata_in()
RDMA/mlx5: Use ib_copy_validate_udata_in() for MW
RDMA/mlx5: Use ib_copy_validate_udata_in() for SRQ
RDMA/pvrdma: Use ib_copy_validate_udata_in() for srq
RDMA: Use ib_copy_validate_udata_in() for implicit full structs
...
|
|
Verify that the BPF verifier rejects a non-SCX struct_ops program
(tcp_congestion_ops) that attempts to call an SCX kfunc (scx_bpf_kick_cpu).
The test expects the load to fail with -EACCES from scx_kfunc_context_filter.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The test_populate test uses >= instead of > when checking if the
runtime nr_cpus exceeds the bit capacity of a cpumask_t.
On a system where the physical CPU core count perfectly matches the
CONFIG_NR_CPUS upper bound (e.g. nr_cpus = 512 and CONFIG_NR_CPUS =
512), the condition nr_cpus >= CPUMASK_TEST_MASKLEN * 8 evaluates to
true (512 >= 512). This incorrectly causes the test to fail with an
error value of 3.
A 512-bit cpumask_t provides enough bits (indices 0 through 511) to
represent 512 CPUs. The subsequent bpf_for(i, 0, nr_cpus) loop
iterates up to nr_cpus - 1 (511), which perfectly aligns with the
maximum valid index of the bitmask.
Change the condition to nr_cpus > CPUMASK_TEST_MASKLEN * 8 to fix the
false positive failure on these systems.
Fixes: 918ba2636d4e ("selftests: bpf: add bpf_cpumask_populate selftests")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/bpf/20260420093734.2400330-1-mattbobrowski@google.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "Eliminate Dying Memory Cgroup" (Qi Zheng and Muchun Song)
Address the longstanding "dying memcg problem". A situation wherein a
no-longer-used memory control group will hang around for an extended
period pointlessly consuming memory
- "fix unexpected type conversions and potential overflows" (Qi Zheng)
Fix a couple of potential 32-bit/64-bit issues which were identified
during review of the "Eliminate Dying Memory Cgroup" series
- "kho: history: track previous kernel version and kexec boot count"
(Breno Leitao)
Use Kexec Handover (KHO) to pass the previous kernel's version string
and the number of kexec reboots since the last cold boot to the next
kernel, and print it at boot time
- "liveupdate: prevent double preservation" (Pasha Tatashin)
Teach LUO to avoid managing the same file across different active
sessions
- "liveupdate: Fix module unloading and unregister API" (Pasha
Tatashin)
Address an issue with how LUO handles module reference counting and
unregistration during module unloading
- "zswap pool per-CPU acomp_ctx simplifications" (Kanchana Sridhar)
Simplify and clean up the zswap crypto compression handling and
improve the lifecycle management of zswap pool's per-CPU acomp_ctx
resources
- "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race"
(SeongJae Park)
Address unlikely but possible leaks and deadlocks in damon_call() and
damon_walk()
- "mm/damon/core: validate damos_quota_goal->nid" (SeongJae Park)
Fix a couple of root-only wild pointer dereferences
- "Docs/admin-guide/mm/damon: warn commit_inputs vs other params race"
(SeongJae Park)
Update the DAMON documentation to warn operators about potential
races which can occur if the commit_inputs parameter is altered at
the wrong time
- "Minor hmm_test fixes and cleanups" (Alistair Popple)
Bugfixes and a cleanup for the HMM kernel selftests
- "Modify memfd_luo code" (Chenghao Duan)
Cleanups, simplifications and speedups to the memfd_lou code
- "mm, kvm: allow uffd support in guest_memfd" (Mike Rapoport)
Support for userfaultfd in guest_memfd
- "selftests/mm: skip several tests when thp is not available" (Chunyu
Hu)
Fix several issues in the selftests code which were causing breakage
when the tests were run on CONFIG_THP=n kernels
- "mm/mprotect: micro-optimization work" (Pedro Falcato)
A couple of nice speedups for mprotect()
- "MAINTAINERS: update KHO and LIVE UPDATE entries" (Pratyush Yadav)
Document upcoming changes in the maintenance of KHO, LUO, memfd_luo,
kexec, crash, kdump and probably other kexec-based things - they are
being moved out of mm.git and into a new git tree
* tag 'mm-stable-2026-04-18-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (121 commits)
MAINTAINERS: add page cache reviewer
mm/vmscan: avoid false-positive -Wuninitialized warning
MAINTAINERS: update Dave's kdump reviewer email address
MAINTAINERS: drop include/linux/liveupdate from LIVE UPDATE
MAINTAINERS: drop include/linux/kho/abi/ from KHO
MAINTAINERS: update KHO and LIVE UPDATE maintainers
MAINTAINERS: update kexec/kdump maintainers entries
mm/migrate_device: remove dead migration entry check in migrate_vma_collect_huge_pmd()
selftests: mm: skip charge_reserved_hugetlb without killall
userfaultfd: allow registration of ranges below mmap_min_addr
mm/vmstat: fix vmstat_shepherd double-scheduling vmstat_update
mm/hugetlb: fix early boot crash on parameters without '=' separator
zram: reject unrecognized type= values in recompress_store()
docs: proc: document ProtectionKey in smaps
mm/mprotect: special-case small folios when applying permissions
mm/mprotect: move softleaf code out of the main function
mm: remove '!root_reclaim' checking in should_abort_scan()
mm/sparse: fix comment for section map alignment
mm/page_io: use sio->len for PSWPIN accounting in sio_read_complete()
selftests/mm: transhuge_stress: skip the test when thp not available
...
|
|
Redefine dynptr mutability and fix inconsistency in the verifier and
kfunc signatures. Dynptr mutability is at two levels. The first is
the bpf_dynptr structure and the second is the memory the dynptr points
to. The verifer currently tracks the mutability of the bpf_dynptr struct
through helper and kfunc prototypes, where "const struct bpf_dynptr *"
means the structure itself is immutable. The second level is tracked
in upper bit of bpf_dynptr->size in runtime and is not changed in this
patch.
There are two type of inconsistency in the verfier regarding the
mutability of the bpf_dynptr struct. First, there are many existing
kfuncs whose prototypes are wrong. For example, bpf_dynptr_adjust()
mutates a dynptr's start and offset but marks the argument as a const
pointer. At the same time many other kfuncs that does not mutate the
dynptr but mark themselves as mutable. Second, the verifier currently
does not honor the const qualifier in kfunc prototypes as it determines
whether tagging the arg_type with MEM_RDONLY or not based on the register
state.
Since all the verifier care is to prevent CONST_PTR_TO_DYNPTR from
being destroyed in callback and global subprogram, redefine the
mutability at the bpf_dynptr level to just bpf_dynptr_kern->data. Then,
explicitly prohibit passing CONST_PTR_TO_DYNPTR to an argument tagged
with MEM_UNINIT or OBJ_RELEASE. The mutability of a dynptr's view is not
really interesting so drop MEM_RDONLY annotation for dynptr from the
helpers and kfuncs. Plus, if the mutability of the entire bpf_dynptr
were to be done correctly, it would kill the bpf_dynptr_adjust() usage
in callback and global subporgram.
Implementation wise
- First, make sure all kfunc arg are correctly tagged: Tag the dynptr
argument of bpf_dynptr_file_discard() with OBJ_RELEASE.
- Then, in process_dynptr_func(), make sure CONST_PTR_TO_DYNPTR cannot
be passed to argument tagged with MEM_UNINIT or OBJ_RELEASE. For
MEM_UNINIT, it is already checked by is_dynptr_reg_valid_uninit().
For OBJ_RELEASE, check against OBJ_RELEASE instead of MEM_RDONLY and
drop a now identical check in unmark_stack_slots_dynptr().
- Remove the mutual exclusive check between MEM_UNINIT and MEM_RDONLY,
but don't add a MEM_UNINIT and OBJ_RELEASE version as it is obviously
wrong.
Note that while this patch stops following the C semantic for the
mutability of bpf_dynptr, the prototype of kfuncs are still fixed to
maintain the correct C semantics in the implementation. Adding or
removing the const qualifier does not break backward compatibility.
In addition, fix kfuncs dropping the const qualifier when casting the
opaque bpf_dynptr to bpf_dynptr_kern.
In test_kfunc_dynptr_param.c, initialize dynptr to 0 to avoid
-Wuninitialized-const-pointer warning.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260414191014.1218567-1-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
task_local_storage/sys_enter_exit and cgrp_local_storage/
cgroup_iter_sleepable occasionally fail in CI possibly because
bpf_{task,cgrp}_storage_get() returns NULL. Add a fexit probe on
bpf_local_storage_update() to capture the actual error code when this
happens. It will allow us to tell if it is trylock failure in
kmalloc_nolock(), timeout/deadlock in rqspinlock or something else.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260417233631.1443199-1-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- improve debuggability of reserve_mem kernel parameter handling with
print outs in case of a failure and debugfs info showing what was
actually reserved
- Make memblock_free_late() and free_reserved_area() use the same core
logic for freeing the memory to buddy and ensure it takes care of
updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.
* tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/alternative: delay freeing of smp_locks section
memblock: warn when freeing reserved memory before memory map is initialized
memblock, treewide: make memblock_free() handle late freeing
memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y
memblock: extract page freeing from free_reserved_area() into a helper
memblock: make free_reserved_area() more robust
mm: move free_reserved_area() to mm/memblock.c
powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact()
powerpc: fadump: pair alloc_pages_exact() with free_pages_exact()
memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name()
memblock: move reserve_bootmem_range() to memblock.c and make it static
memblock: Add reserve_mem debugfs info
memblock: Print out errors on reserve_mem parser
|
|
charge_reserved_hugetlb.sh tears down background writers with killall from
psmisc. Minimal Ubuntu images do not always provide that tool, so the
selftest fails in cleanup for an environment reason rather than for the
hugetlb behavior it is trying to cover.
Skip the test when killall is unavailable, similar to the existing root
check, so these environments report the dependency clearly instead of
failing the test.
Link: https://lore.kernel.org/20260410044139.67480-1-create0818@163.com
Signed-off-by: Cao Ruichuang <create0818@163.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test requires thp, skip the test when thp is not available to avoid
false positive.
Tested with thp disabled kernel.
Before the fix:
# --------------------------------
# running ./transhuge-stress -d 20
# --------------------------------
# TAP version 13
# 1..1
# transhuge-stress: allocate 1453 transhuge pages, using 2907 MiB virtual memory and 11 MiB of ram
# Bail out! MADV_HUGEPAGE# Planned tests != run tests (1 != 0)
# # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
# [FAIL]
not ok 60 transhuge-stress -d 20 # exit=1
After the fix:
# --------------------------------
# running ./transhuge-stress -d 20
# --------------------------------
# TAP version 13
# 1..0 # SKIP Transparent Hugepages not available
# [SKIP]
ok 5 transhuge-stress -d 20 # SKIP
Link: https://lore.kernel.org/20260402014543.1671131-7-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When thp is not enabled on some kernel config such as realtime kernel, the
test will report failure. Fix the false positive by skipping the test
directly when thp is not enabled.
Tested with thp disabled kernel:
Before The fix:
# --------------------------------------------------
# running ./split_huge_page_test /tmp/xfs_dir_Ywup9p
# --------------------------------------------------
# TAP version 13
# Bail out! Reading PMD pagesize failed
# # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
# [FAIL]
not ok 61 split_huge_page_test /tmp/xfs_dir_Ywup9p # exit=1
After the fix:
# --------------------------------------------------
# running ./split_huge_page_test /tmp/xfs_dir_YHPUPl
# --------------------------------------------------
# TAP version 13
# 1..0 # SKIP Transparent Hugepages not available
# [SKIP]
ok 6 split_huge_page_test /tmp/xfs_dir_YHPUPl # SKIP
Link: https://lore.kernel.org/20260402014543.1671131-6-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add three more checks for buflen and numwritten. The buflen should be at
least two, that means at least one char and the null-end. The error case
check is added by checking numwriten < 0 instead of numwritten < 1. And
the truncate case is checked. The test will exit if any of these
conditions aren't met.
Additionally, add more print information when a write failure occurs or a
truncated write happens, providing clearer diagnostics.
Link: https://lore.kernel.org/20260402014543.1671131-5-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
thp_settings provides write_file() helper for safely writing to a file and
exit when write failure happens. It's a very low level helper and many
sub tests need such a helper, not only thp tests.
split_huge_page_test also defines a write_file locally. The two have
minior differences in return type and used exit api. And there would be
conflicts if split_huge_page_test wanted to include thp_settings.h because
of different prototype, making it less convenient.
It's possisble to merge the two, although some tests don't use the
kselftest infrastrucutre for testing. It would also work when using the
ksft_exit_msg() to exit in my test, as the counters are all zero. Output
will be like:
TAP version 13
1..62
Bail out! /proc/sys/vm/drop_caches1 open failed: No such file or directory
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
So here we just keep the version in split_huge_page_test, and move it into
the vm_util. This makes it easy to maitain and user could just include
one vm_util.h when they don't need thp setting helpers. Keep the
prototype of void return as the function will exit on any error, return
value is not necessary, and will simply the callers like write_num() and
write_string().
Link: https://lore.kernel.org/20260402014543.1671131-4-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test_hugepage test contain two sub tests. If just reporting one skip
when thp not available, there will be error in the log because the test
count don't match the test plan. Change to skip two tests by running the
ksft_test_result_skip twice in this case.
Without the fix (run test on thp disabled kernel):
./run_vmtests.sh -t soft_dirty
# --------------------
# running ./soft-dirty
# --------------------
# TAP version 13
# 1..19
# ok 1 Test test_simple
# ok 2 Test test_vma_reuse dirty bit of allocated page
# ok 3 Test test_vma_reuse dirty bit of reused address page
# ok 4 # SKIP Transparent Hugepages not available
# ok 5 Test test_mprotect-anon dirty bit of new written page
# ok 6 Test test_mprotect-anon soft-dirty clear after clear_refs
# ok 7 Test test_mprotect-anon soft-dirty clear after marking RO
# ok 8 Test test_mprotect-anon soft-dirty clear after marking RW
# ok 9 Test test_mprotect-anon soft-dirty after rewritten
# ok 10 Test test_mprotect-file dirty bit of new written page
# ok 11 Test test_mprotect-file soft-dirty clear after clear_refs
# ok 12 Test test_mprotect-file soft-dirty clear after marking RO
# ok 13 Test test_mprotect-file soft-dirty clear after marking RW
# ok 14 Test test_mprotect-file soft-dirty after rewritten
# ok 15 Test test_merge-anon soft-dirty after remap merge 1st pg
# ok 16 Test test_merge-anon soft-dirty after remap merge 2nd pg
# ok 17 Test test_merge-anon soft-dirty after mprotect merge 1st pg
# ok 18 Test test_merge-anon soft-dirty after mprotect merge 2nd pg
# # 1 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# # Planned tests != run tests (19 != 18)
# # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0
# [FAIL]
not ok 52 soft-dirty # exit=1
With the fix (run test on thp disabled kernel):
./run_vmtests.sh -t soft_dirty
# --------------------
# running ./soft-dirty
# TAP version 13
# --------------------
# running ./soft-dirty
# --------------------
# TAP version 13
# 1..19
# ok 1 Test test_simple
# ok 2 Test test_vma_reuse dirty bit of allocated page
# ok 3 Test test_vma_reuse dirty bit of reused address page
# # Transparent Hugepages not available
# ok 4 # SKIP Test test_hugepage huge page allocation
# ok 5 # SKIP Test test_hugepage huge page dirty bit
# ok 6 Test test_mprotect-anon dirty bit of new written page
# ok 7 Test test_mprotect-anon soft-dirty clear after clear_refs
# ok 8 Test test_mprotect-anon soft-dirty clear after marking RO
# ok 9 Test test_mprotect-anon soft-dirty clear after marking RW
# ok 10 Test test_mprotect-anon soft-dirty after rewritten
# ok 11 Test test_mprotect-file dirty bit of new written page
# ok 12 Test test_mprotect-file soft-dirty clear after clear_refs
# ok 13 Test test_mprotect-file soft-dirty clear after marking RO
# ok 14 Test test_mprotect-file soft-dirty clear after marking RW
# ok 15 Test test_mprotect-file soft-dirty after rewritten
# ok 16 Test test_merge-anon soft-dirty after remap merge 1st pg
# ok 17 Test test_merge-anon soft-dirty after remap merge 2nd pg
# ok 18 Test test_merge-anon soft-dirty after mprotect merge 1st pg
# ok 19 Test test_merge-anon soft-dirty after mprotect merge 2nd pg
# # 2 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:2 error:0
# [PASS]
ok 1 soft-dirty
hwpoison_inject
# SUMMARY: PASS=1 SKIP=0 FAIL=0
1..1
Link: https://lore.kernel.org/20260402014543.1671131-3-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: skip several tests when thp is not available",
v8.
There are several tests requires transprarent hugepages, when run on thp
disabled kernel such as realtime kernel, there will be false negative.
Mark those tests as skip when thp is not available.
This patch (of 6):
When thp is not available, just skip the collape tests to avoid the false
negative.
Without the change, run with a thp disabled kernel:
./run_vmtests.sh -t madv_guard -n 1
<snip/>
# RUN guard_regions.anon.collapse ...
# guard-regions.c:2217:collapse:Expected madvise(ptr, size, MADV_NOHUGEPAGE) (-1) == 0 (0)
# collapse: Test terminated by assertion
# FAIL guard_regions.anon.collapse
not ok 2 guard_regions.anon.collapse
<snip/>
# RUN guard_regions.shmem.collapse ...
# guard-regions.c:2217:collapse:Expected madvise(ptr, size, MADV_NOHUGEPAGE) (-1) == 0 (0)
# collapse: Test terminated by assertion
# FAIL guard_regions.shmem.collapse
not ok 32 guard_regions.shmem.collapse
<snip/>
# RUN guard_regions.file.collapse ...
# guard-regions.c:2217:collapse:Expected madvise(ptr, size, MADV_NOHUGEPAGE) (-1) == 0 (0)
# collapse: Test terminated by assertion
# FAIL guard_regions.file.collapse
not ok 62 guard_regions.file.collapse
<snip/>
# FAILED: 87 / 90 tests passed.
# 17 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# Totals: pass:70 fail:3 xfail:0 xpass:0 skip:17 error:0
With this change, run with thp disabled kernel:
./run_vmtests.sh -t madv_guard -n 1
<snip/>
# RUN guard_regions.anon.collapse ...
# SKIP Transparent Hugepages not available
# OK guard_regions.anon.collapse
ok 2 guard_regions.anon.collapse # SKIP Transparent Hugepages not available
<snip/>
# RUN guard_regions.file.collapse ...
# SKIP Transparent Hugepages not available
# OK guard_regions.file.collapse
ok 62 guard_regions.file.collapse # SKIP Transparent Hugepages not available
<snip/>
# RUN guard_regions.shmem.collapse ...
# SKIP Transparent Hugepages not available
# OK guard_regions.shmem.collapse
ok 32 guard_regions.shmem.collapse # SKIP Transparent Hugepages not available
<snip/>
# PASSED: 90 / 90 tests passed.
# 20 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# Totals: pass:70 fail:0 xfail:0 xpass:0 skip:20 error:0
Link: https://lore.kernel.org/20260402014543.1671131-1-chuhu@redhat.com
Link: https://lore.kernel.org/20260402014543.1671131-2-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Li Wang <liwang@redhat.com>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several HMM tests hardcode TWOMEG as the THP size. This is wrong on
architectures where the PMD size is not 2MB such as arm64 with 64K base
pages where THP is 512MB. Fix this by using read_pmd_pagesize() from
vm_util instead.
While here also replace the custom file_read_ulong() helper used to
parse the default hugetlbfs page size from /proc/meminfo with the
existing default_huge_page_size() from vm_util.
Link: https://lore.kernel.org/20260331063445.3551404-3-apopple@nvidia.com
Link: https://lore.kernel.org/linux-mm/8bd0396a-8997-4d2e-a13f-5aac033083d7@linux.dev/
Fixes: fee9f6d1b8df ("mm/hmm/test: add selftests for HMM")
Fixes: 519071529d2a ("selftests/mm/hmm-tests: new tests for zone device THP migration")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Zenghui Yu <zenghui.yu@linux.dev>
Closes: https://lore.kernel.org/linux-mm/8bd0396a-8997-4d2e-a13f-5aac033083d7@linux.dev/
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger,kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
hugetlb_dio test uses sub-page offsets (pagesize / 2) to verify that
hugepages used as DIO user buffers are correctly unpinned at completion.
However, on filesystems with a logical block size larger than half the
page size (e.g., 4K-sector block devices), these unaligned DIO writes are
rejected with -EINVAL, causing the test to fail unexpectedly.
Add get_dio_alignment() to query the filesystem's required DIO alignment
via statx(STATX_DIOALIGN) and skip individual test cases whose file offset
or write size is not a multiple of that alignment. Aligned cases continue
to run so the core coverage is preserved.
While here, open the temporary file once in main() and share the fd across
all test cases instead of reopening it in each invocation.
=== Reproduce Steps ===
# dd if=/dev/zero of=/tmp/test.img bs=1M count=512
# losetup --sector-size 4096 /dev/loop0 /tmp/test.img
# mkfs.xfs /dev/loop0
# mkdir -p /mnt/dio_test
# mount /dev/loop0 /mnt/dio_test
// Modify test to open /mnt/dio_test and rebuild it:
- fd = open("/tmp", O_TMPFILE | O_RDWR | O_DIRECT, 0664);
+ fd = open("/mnt/dio_test", O_TMPFILE | O_RDWR | O_DIRECT, 0664);
# getconf PAGESIZE
4096
# echo 100 >/proc/sys/vm/nr_hugepages
# ./hugetlb_dio
TAP version 13
1..4
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 1 free huge pages from 0-12288
Bail out! Error writing to file
: Invalid argument (22)
# Planned tests != run tests (4 != 1)
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lore.kernel.org/20260401090520.24018-1-liwang@redhat.com
Signed-off-by: Li Wang <liwang@redhat.com>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Suggested-by: David Hildenbrand <david@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 2697dd8ae721 ("mm/mseal: update VMA end correctly on merge") fixed
an issue in the loop which iterates through VMAs applying mseal, which was
triggered by mseal()'ing a range of VMAs where the second was mseal()'d
and the first mergeable with it, once mseal()'d.
Add a regression test to assert that this behaviour is correct. We place
it in the merge selftests as this is strictly an issue with merging (via a
vma_modify() invocation).
It also asserts that mseal()'d ranges are correctly merged as you'd
expect.
The test is implemented such that it is skipped if mseal() is not
available on the system.
[rppt@kernel.org: fix inclusions, to fix handle_uprobe_upon_merged_vma()]
Link: https://lore.kernel.org/ac_mCIUQWRAbuH8F@kernel.org
[ljs@kernel.org: simplifications per Pedro]
Link: https://lore.kernel.org/1c9c922d-5cb5-4cff-9273-b737cdb57ca1@lucifer.local
Link: https://lore.kernel.org/20260331073627.50010-1-ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Verify that a file can only be preserved once across all active sessions.
Attempting to preserve it a second time, whether in the same or a
different session, should fail with EBUSY.
Link: https://lore.kernel.org/20260326163943.574070-4-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
"Most of the diff stat comes from Xu Kuohai's fix to emit ENDBR/BTI,
since all JITs had to be touched to move constant blinding out and
pass bpf_verifier_env in.
- Fix use-after-free in arena_vm_close on fork (Alexei Starovoitov)
- Dissociate struct_ops program with map if map_update fails (Amery
Hung)
- Fix out-of-range and off-by-one bugs in arm64 JIT (Daniel Borkmann)
- Fix precedence bug in convert_bpf_ld_abs alignment check (Daniel
Borkmann)
- Fix arg tracking for imprecise/multi-offset in BPF_ST/STX insns
(Eduard Zingerman)
- Copy token from main to subprogs to fix missing kallsyms (Eduard
Zingerman)
- Prevent double close and leak of btf objects in libbpf (Jiri Olsa)
- Fix af_unix null-ptr-deref in sockmap (Michal Luczaj)
- Fix NULL deref in map_kptr_match_type for scalar regs (Mykyta
Yatsenko)
- Avoid unnecessary IPIs. Remove redundant bpf_flush_icache() in
arm64 and riscv JITs (Puranjay Mohan)
- Fix out of bounds access. Validate node_id in arena_alloc_pages()
(Puranjay Mohan)
- Reject BPF-to-BPF calls and callbacks in arm32 JIT (Puranjay Mohan)
- Refactor all JITs to pass bpf_verifier_env to emit ENDBR/BTI for
indirect jump targets on x86-64, arm64 JITs (Xu Kuohai)
- Allow UTF-8 literals in bpf_bprintf_prepare() (Yihan Ding)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (32 commits)
bpf, arm32: Reject BPF-to-BPF calls and callbacks in the JIT
bpf: Dissociate struct_ops program with map if map_update fails
bpf: Validate node_id in arena_alloc_pages()
libbpf: Prevent double close and leak of btf objects
selftests/bpf: cover UTF-8 trace_printk output
bpf: allow UTF-8 literals in bpf_bprintf_prepare()
selftests/bpf: Reject scalar store into kptr slot
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
bpf: Fix precedence bug in convert_bpf_ld_abs alignment check
bpf, arm64: Emit BTI for indirect jump target
bpf, x86: Emit ENDBR for indirect jump targets
bpf: Add helper to detect indirect jump targets
bpf: Pass bpf_verifier_env to JIT
bpf: Move constants blinding out of arch-specific JITs
bpf, sockmap: Take state lock for af_unix iter
bpf, sockmap: Fix af_unix null-ptr-deref in proto update
selftests/bpf: Extend bpf_iter_unix to attempt deadlocking
bpf, sockmap: Fix af_unix iter deadlock
bpf, sockmap: Annotate af_unix sock:: Sk_state data-races
selftests/bpf: verify kallsyms entries for token-loaded subprograms
...
|
|
Pull CXL (Compute Express Link) updates from Dave Jiang:
"The significant change of interest is the handling of soft reserved
memory conflict between CXL and HMEM. In essence CXL will be the first
to claim the soft reserved memory ranges that belongs to CXL and
attempt to enumerate them with best effort. If CXL is not able to
enumerate the ranges it will punt them to HMEM.
There are also MAINTAINERS email changes from Dan Williams and
Jonathan Cameron"
* tag 'cxl-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (37 commits)
MAINTAINERS: Update Jonathan Cameron's email address
cxl/hdm: Add support for 32 switch decoders
MAINTAINERS: Update address for Dan Williams
tools/testing/cxl: Enable replay of user regions as auto regions
cxl/region: Add a region sysfs interface for region lock status
tools/testing/cxl: Test dax_hmem takeover of CXL regions
tools/testing/cxl: Simulate auto-assembly failure
dax/hmem: Parent dax_hmem devices
dax/hmem: Fix singleton confusion between dax_hmem_work and hmem devices
dax/hmem: Reduce visibility of dax_cxl coordination symbols
cxl/region: Constify cxl_region_resource_contains()
cxl/region: Limit visibility of cxl_region_contains_resource()
dax/cxl: Fix HMEM dependencies
cxl/region: Fix use-after-free from auto assembly failure
cxl/core: Check existence of cxl_memdev_state in poison test
cxl/core: use cleanup.h for devm_cxl_add_dax_region
cxl/core/region: move dax region device logic into region_dax.c
cxl/core/region: move pmem region driver logic into region_pmem.c
dax/hmem, cxl: Defer and resolve Soft Reserved ownership
cxl/region: Add helper to check Soft Reserved containment by CXL regions
...
|
|
Commit 2964f6b816c2 ("selftests: Use ktap helpers for runner.sh") converted
the prints in runner.sh to use the relevant helpers from ktap_helpers.sh,
not modifying any of the strings printed in the process. This included
converting all the result reports to use the relevant ktap_test_ function.
Since the output was originally KTAP compliant the strings reported for
test names now include test numbers:
ok 59 59 selftests: arm64: syscall-abi
instead of the expected format:
ok 59 selftests: arm64: syscall-abi
which causes result parsers to interpret the second number as part of the
test name.
Given the use of the helpers the tracking of test numbers by runner.sh is
now redundant, remove it entirely to restore the expected output format.
Link: https://lore.kernel.org/r/20260417-selftests-fix-double-number-v1-1-1be5d7c36b94@kernel.org
Fixes: 2964f6b816c2 ("selftests: Use ktap helpers for runner.sh")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Fix printf format warning for bprintf
sunrpc uses a trace_printk() that triggers a printf warning during
the compile. Move the __printf() attribute around for when debugging
is not enabled the warning will go away
- Remove redundant check for EVENT_FILE_FL_FREED in
event_filter_write()
The FREED flag is checked in the call to event_file_file() and then
checked again right afterward, which is unneeded
- Clean up event_file_file() and event_file_data() helpers
These helper functions played a different role in the past, but now
with eventfs, the READ_ONCE() isn't needed. Simplify the code a bit
and also add a warning to event_file_data() if the file or its data
is not present
- Remove updating file->private_data in tracing open
All access to the file private data is handled by the helper
functions, which do not use file->private_data. Stop updating it on
open
- Show ENUM names in function arguments via BTF in function tracing
When showing the function arguments when func-args option is set for
function tracing, if one of the arguments is found to be an enum,
show the name of the enum instead of its number
- Add new trace_call__##name() API for tracepoints
Tracepoints are enabled via static_branch() blocks, where when not
enabled, there's only a nop that is in the code where the execution
will just skip over it. When tracing is enabled, the nop is converted
to a direct jump to the tracepoint code. Sometimes more calculations
are required to be performed to update the parameters of the
tracepoint. In this case, trace_##name##_enabled() is called which is
a static_branch() that gets enabled only when the tracepoint is
enabled. This allows the extra calculations to also be skipped by the
nop:
if (trace_foo_enabled()) {
x = bar();
trace_foo(x);
}
Where the x=bar() is only performed when foo is enabled. The problem
with this approach is that there's now two static_branch() calls. One
for checking if the tracepoint is enabled, and then again to know if
the tracepoint should be called. The second one is redundant
Introduce trace_call__foo() that will call the foo() tracepoint
directly without doing a static_branch():
if (trace_foo_enabled()) {
x = bar();
trace_call__foo();
}
- Update various locations to use the new trace_call__##name() API
- Move snapshot code out of trace.c
Cleaning up trace.c to not be a "dump all", move the snapshot code
out of it and into a new trace_snapshot.c file
- Clean up some "%*.s" to "%*s"
- Allow boot kernel command line options to be called multiple times
Have options like:
ftrace_filter=foo ftrace_filter=bar ftrace_filter=zoo
Equal to:
ftrace_filter=foo,bar,zoo
- Fix ipi_raise event CPU field to be a CPU field
The ipi_raise target_cpus field is defined as a __bitmask(). There is
now a __cpumask() field definition. Update the field to use that
- Have hist_field_name() use a snprintf() and not a series of strcat()
It's safer to use snprintf() that a series of strcat()
- Fix tracepoint regfunc balancing
A tracepoint can define a "reg" and "unreg" function that gets called
before the tracepoint is enabled, and after it is disabled
respectively. But on error, after the "reg" func is called and the
tracepoint is not enabled, the "unreg" function is not called to tear
down what the "reg" function performed
- Fix output that shows what histograms are enabled
Event variables are displayed incorrectly in the histogram output
Instead of "sched.sched_wakeup.$var", it is showing
"$sched.sched_wakeup.var" where the '$' is in the incorrect location
- Some other simple cleanups
* tag 'trace-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (24 commits)
selftests/ftrace: Add test case for fully-qualified variable references
tracing: Fix fully-qualified variable reference printing in histograms
tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func()
tracing: Rebuild full_name on each hist_field_name() call
tracing: Report ipi_raise target CPUs as cpumask
tracing: Remove duplicate latency_fsnotify() stub
tracing: Preserve repeated trace_trigger boot parameters
tracing: Append repeated boot-time tracing parameters
tracing: Remove spurious default precision from show_event_trigger/filter formats
cpufreq: Use trace_call__##name() at guarded tracepoint call sites
tracing: Remove tracing_alloc_snapshot() when snapshot isn't defined
tracing: Move snapshot code out of trace.c and into trace_snapshot.c
mm: damon: Use trace_call__##name() at guarded tracepoint call sites
btrfs: Use trace_call__##name() at guarded tracepoint call sites
spi: Use trace_call__##name() at guarded tracepoint call sites
i2c: Use trace_call__##name() at guarded tracepoint call sites
kernel: Use trace_call__##name() at guarded tracepoint call sites
tracepoint: Add trace_call__##name() API
tracing: trace_mmap.h: fix a kernel-doc warning
tracing: Pretty-print enum parameters in function arguments
...
|
|
Pull kvm updates from Paolo Bonzini:
"Arm:
- Add support for tracing in the standalone EL2 hypervisor code,
which should help both debugging and performance analysis. This
uses the new infrastructure for 'remote' trace buffers that can be
exposed by non-kernel entities such as firmware, and which came
through the tracing tree
- Add support for GICv5 Per Processor Interrupts (PPIs), as the
starting point for supporting the new GIC architecture in KVM
- Finally add support for pKVM protected guests, where pages are
unmapped from the host as they are faulted into the guest and can
be shared back from the guest using pKVM hypercalls. Protected
guests are created using a new machine type identifier. As the
elusive guestmem has not yet delivered on its promises, anonymous
memory is also supported
This is only a first step towards full isolation from the host; for
example, the CPU register state and DMA accesses are not yet
isolated. Because this does not really yet bring fully what it
promises, it is hidden behind CONFIG_ARM_PKVM_GUEST +
'kvm-arm.mode=protected', and also triggers TAINT_USER when a VM is
created. Caveat emptor
- Rework the dreaded user_mem_abort() function to make it more
maintainable, reducing the amount of state being exposed to the
various helpers and rendering a substantial amount of state
immutable
- Expand the Stage-2 page table dumper to support NV shadow page
tables on a per-VM basis
- Tidy up the pKVM PSCI proxy code to be slightly less hard to
follow
- Fix both SPE and TRBE in non-VHE configurations so that they do not
generate spurious, out of context table walks that ultimately lead
to very bad HW lockups
- A small set of patches fixing the Stage-2 MMU freeing in error
cases
- Tighten-up accepted SMC immediate value to be only #0 for host
SMCCC calls
- The usual cleanups and other selftest churn
LoongArch:
- Use CSR_CRMD_PLV for kvm_arch_vcpu_in_kernel()
- Add DMSINTC irqchip in kernel support
RISC-V:
- Fix steal time shared memory alignment checks
- Fix vector context allocation leak
- Fix array out-of-bounds in pmu_ctr_read() and pmu_fw_ctr_read_hi()
- Fix double-free of sdata in kvm_pmu_clear_snapshot_area()
- Fix integer overflow in kvm_pmu_validate_counter_mask()
- Fix shift-out-of-bounds in make_xfence_request()
- Fix lost write protection on huge pages during dirty logging
- Split huge pages during fault handling for dirty logging
- Skip CSR restore if VCPU is reloaded on the same core
- Implement kvm_arch_has_default_irqchip() for KVM selftests
- Factored-out ISA checks into separate sources
- Added hideleg to struct kvm_vcpu_config
- Factored-out VCPU config into separate sources
- Support configuration of per-VM HGATP mode from KVM user space
s390:
- Support for ESA (31-bit) guests inside nested hypervisors
- Remove restriction on memslot alignment, which is not needed
anymore with the new gmap code
- Fix LPSW/E to update the bear (which of course is the breaking
event address register)
x86:
- Shut up various UBSAN warnings on reading module parameter before
they were initialized
- Don't zero-allocate page tables that are used for splitting
hugepages in the TDP MMU, as KVM is guaranteed to set all SPTEs in
the page table and thus write all bytes
- As an optimization, bail early when trying to unsync 4KiB mappings
if the target gfn can just be mapped with a 2MiB hugepage
x86 generic:
- Copy single-chunk MMIO write values into struct kvm_vcpu (more
precisely struct kvm_mmio_fragment) to fix use-after-free stack
bugs where KVM would dereference stack pointer after an exit to
userspace
- Clean up and comment the emulated MMIO code to try to make it
easier to maintain (not necessarily "easy", but "easier")
- Move VMXON+VMXOFF and EFER.SVME toggling out of KVM (not *all* of
VMX and SVM enabling) as it is needed for trusted I/O
- Advertise support for AVX512 Bit Matrix Multiply (BMM) instructions
- Immediately fail the build if a required #define is missing in one
of KVM's headers that is included multiple times
- Reject SET_GUEST_DEBUG with -EBUSY if there's an already injected
exception, mostly to prevent syzkaller from abusing the uAPI to
trigger WARNs, but also because it can help prevent userspace from
unintentionally crashing the VM
- Exempt SMM from CPUID faulting on Intel, as per the spec
- Misc hardening and cleanup changes
x86 (AMD):
- Fix and optimize IRQ window inhibit handling for AVIC; make it
per-vCPU so that KVM doesn't prematurely re-enable AVIC if multiple
vCPUs have to-be-injected IRQs
- Clean up and optimize the OSVW handling, avoiding a bug in which
KVM would overwrite state when enabling virtualization on multiple
CPUs in parallel. This should not be a problem because OSVW should
usually be the same for all CPUs
- Drop a WARN in KVM_MEMORY_ENCRYPT_REG_REGION where KVM complains
about a "too large" size based purely on user input
- Clean up and harden the pinning code for KVM_MEMORY_ENCRYPT_REG_REGION
- Disallow synchronizing a VMSA of an already-launched/encrypted
vCPU, as doing so for an SNP guest will crash the host due to an
RMP violation page fault
- Overhaul KVM's APIs for detecting SEV+ guests so that VM-scoped
queries are required to hold kvm->lock, and enforce it by lockdep.
Fix various bugs where sev_guest() was not ensured to be stable for
the whole duration of a function or ioctl
- Convert a pile of kvm->lock SEV code to guard()
- Play nicer with userspace that does not enable
KVM_CAP_EXCEPTION_PAYLOAD, for which KVM needs to set CR2 and DR6
as a response to ioctls such as KVM_GET_VCPU_EVENTS (even if the
payload would end up in EXITINFO2 rather than CR2, for example).
Only set CR2 and DR6 when consumption of the payload is imminent,
but on the other hand force delivery of the payload in all paths
where userspace retrieves CR2 or DR6
- Use vcpu->arch.cr2 when updating vmcb12's CR2 on nested #VMEXIT
instead of vmcb02->save.cr2. The value is out of sync after a
save/restore or after a #PF is injected into L2
- Fix a class of nSVM bugs where some fields written by the CPU are
not synchronized from vmcb02 to cached vmcb12 after VMRUN, and so
are not up-to-date when saved by KVM_GET_NESTED_STATE
- Fix a class of bugs where the ordering between KVM_SET_NESTED_STATE
and KVM_SET_{S}REGS could cause vmcb02 to be incorrectly
initialized after save+restore
- Add a variety of missing nSVM consistency checks
- Fix several bugs where KVM failed to correctly update VMCB fields
on nested #VMEXIT
- Fix several bugs where KVM failed to correctly synthesize #UD or
#GP for SVM-related instructions
- Add support for save+restore of virtualized LBRs (on SVM)
- Refactor various helpers and macros to improve clarity and
(hopefully) make the code easier to maintain
- Aggressively sanitize fields when copying from vmcb12, to guard
against unintentionally allowing L1 to utilize yet-to-be-defined
features
- Fix several bugs where KVM botched rAX legality checks when
emulating SVM instructions. There are remaining issues in that KVM
doesn't handle size prefix overrides for 64-bit guests
- Fail emulation of VMRUN/VMLOAD/VMSAVE if mapping vmcb12 fails
instead of somewhat arbitrarily synthesizing #GP (i.e. don't double
down on AMD's architectural but sketchy behavior of generating #GP
for "unsupported" addresses)
- Cache all used vmcb12 fields to further harden against TOCTOU bugs
x86 (Intel):
- Drop obsolete branch hint prefixes from the VMX instruction macros
- Use ASM_INPUT_RM() in __vmcs_writel() to coerce clang into using a
register input when appropriate
- Code cleanups
guest_memfd:
- Don't mark guest_memfd folios as accessed, as guest_memfd doesn't
support reclaim, the memory is unevictable, and there is no storage
to write back to
LoongArch selftests:
- Add KVM PMU test cases
s390 selftests:
- Enable more memory selftests
x86 selftests:
- Add support for Hygon CPUs in KVM selftests
- Fix a bug in the MSR test where it would get false failures on
AMD/Hygon CPUs with exactly one of RDPID or RDTSCP
- Add an MADV_COLLAPSE testcase for guest_memfd as a regression test
for a bug where the kernel would attempt to collapse guest_memfd
folios against KVM's will"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (373 commits)
KVM: x86: use inlines instead of macros for is_sev_*guest
x86/virt: Treat SVM as unsupported when running as an SEV+ guest
KVM: SEV: Goto an existing error label if charging misc_cg for an ASID fails
KVM: SVM: Move lock-protected allocation of SEV ASID into a separate helper
KVM: SEV: use mutex guard in snp_handle_guest_req()
KVM: SEV: use mutex guard in sev_mem_enc_unregister_region()
KVM: SEV: use mutex guard in sev_mem_enc_ioctl()
KVM: SEV: use mutex guard in snp_launch_update()
KVM: SEV: Assert that kvm->lock is held when querying SEV+ support
KVM: SEV: Document that checking for SEV+ guests when reclaiming memory is "safe"
KVM: SEV: Hide "struct kvm_sev_info" behind CONFIG_KVM_AMD_SEV=y
KVM: SEV: WARN on unhandled VM type when initializing VM
KVM: LoongArch: selftests: Add PMU overflow interrupt test
KVM: LoongArch: selftests: Add basic PMU event counting test
KVM: LoongArch: selftests: Add cpucfg read/write helpers
LoongArch: KVM: Add DMSINTC inject msi to vCPU
LoongArch: KVM: Add DMSINTC device support
LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function
LoongArch: KVM: Move host CSR_GSTAT save and restore in context switch
LoongArch: KVM: Move host CSR_EENTRY save and restore in context switch
...
|
|
Starting one background YNL notification listener per peer back-to-back
can intermittently stall the test setup before the listeners even reach
the Python main function.
This was reproducible in a reduced test.sh setup-only loop: a single
listener stayed stable across repeated runs, while starting listeners
for all peers could hang early in the listener launch phase. Adding a
short delay between listener launches makes the listeners start cleanly
and eliminates the reproduced hangs in repeated normal and slow-runner
tests.
Serialize listener startup with a small sleep between setup_listener
calls.
Fixes: 77de28cd7cf1 ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Current tests do not properly adhere to the TAP infrastructure
therefore they do not properly report failures leading to hangs of
the CI machinery.
Restructure ovpn selftests into using the TAP infrastructure: split each
test in stages, execute stage bodies with fail-fast semantics, and emit
KTAP pass/fail for each stage.
Centralize behavior control in common.sh and makes the scripts use
dedicated wrappers for required-success, expected-failure, and non-fatal
commands. Also add the OVPN_VERBOSE mode that exposes captured command
output for debugging.
This way tests won't hang anymore in case of failure when executed
within the CI machinery.
This change also makes default OVPN_CLI and YNL resolution
independent from the caller CWD by anchoring both to COMMON_DIR, so
behavior is stable across direct execution and run_tests-style
execution.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Current naming for shared variables, helpers and netnamespaces is
a bit unfortunate as it doesn't come with a clean prefix.
This showed to be problematic in case of name clashes with external
scripts or in case of abrupt test termination (hanging netns' weren't
easily reconducible to ovpn).
Rename common helper entry points and all shared globals in the ovpn
selftests to ovpn_ or OVPN_ names so test scripts and wrappers use a
single explicit prefix. Also rename the temporary network namespaces
created by the tests from peerN to ovpn_peerN. This makes leaked
namespaces easier to identify.
This is a mechanical refactor only, behavior is unchanged.
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Notification comparison uses jq -s, which slurps all inputs into an
array. Some inputs can be arrays themselves, and applying the .msg.peer
filter directly on those entries triggers jq type errors.
Expand any array-valued JSON items returned by jq -s before selecting
.msg.peer, so the filter handles both normal notification objects and []
entries without type errors.
Fixes: 77de28cd7cf1 ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
compare_ntfs doesn't fail when expected and received notification
streams diverge.
Fix this bug by tracking the diff exit status explicitly and return it
to the caller so notification mismatches propagate as test failures.
Fixes: 77de28cd7cf1 ("selftests: ovpn: add notification parsing and matching")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
test-mark.sh installs nftables rules in an inet/filter output chain and
verifies packet drops via nft counters. In vmksft this can fail when the
nftables core is not enabled by the ovpn selftest config.
Add the missing kernel options required by this test:
- CONFIG_NETFILTER
- CONFIG_NF_TABLES
- CONFIG_NF_TABLES_INET
Fixes: 7b80d8a33500 ("selftests: ovpn: add test for the FW mark feature")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260319124114.42f91f72@kernel.org/
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "pid: make sub-init creation retryable" (Oleg Nesterov)
Make creation of init in a new namespace more robust by clearing away
some historical cruft which is no longer needed. Also some
documentation fixups
- "selftests/fchmodat2: Error handling and general" (Mark Brown)
Fix and a cleanup for the fchmodat2() syscall selftest
- "lib: polynomial: Move to math/ and clean up" (Andy Shevchenko)
- "hung_task: Provide runtime reset interface for hung task detector"
(Aaron Tomlin)
Give administrators the ability to zero out
/proc/sys/kernel/hung_task_detect_count
- "tools/getdelays: use the static UAPI headers from
tools/include/uapi" (Thomas Weißschuh)
Teach getdelays to use the in-kernel UAPI headers rather than the
system-provided ones
- "watchdog/hardlockup: Improvements to hardlockup" (Mayank Rungta)
Several cleanups and fixups to the hardlockup detector code and its
documentation
- "lib/bch: fix undefined behavior from signed left-shifts" (Josh Law)
A couple of small/theoretical fixes in the bch code
- "ocfs2/dlm: fix two bugs in dlm_match_regions()" (Junrui Luo)
- "cleanup the RAID5 XOR library" (Christoph Hellwig)
A quite far-reaching cleanup to this code. I can't do better than to
quote Christoph:
"The XOR library used for the RAID5 parity is a bit of a mess right
now. The main file sits in crypto/ despite not being cryptography
and not using the crypto API, with the generic implementations
sitting in include/asm-generic and the arch implementations
sitting in an asm/ header in theory. The latter doesn't work for
many cases, so architectures often build the code directly into
the core kernel, or create another module for the architecture
code.
Change this to a single module in lib/ that also contains the
architecture optimizations, similar to the library work Eric
Biggers has done for the CRC and crypto libraries later. After
that it changes to better calling conventions that allow for
smarter architecture implementations (although none is contained
here yet), and uses static_call to avoid indirection function call
overhead"
- "lib/list_sort: Clean up list_sort() scheduling workarounds"
(Kuan-Wei Chiu)
Clean up this library code by removing a hacky thing which was added
for UBIFS, which UBIFS doesn't actually need
- "Fix bugs in extract_iter_to_sg()" (Christian Ehrhardt)
Fix a few bugs in the scatterlist code, add in-kernel tests for the
now-fixed bugs and fix a leak in the test itself
- "kdump: Enable LUKS-encrypted dump target support in ARM64 and
PowerPC" (Coiby Xu)
Enable support of the LUKS-encrypted device dump target on arm64 and
powerpc
- "ocfs2: consolidate extent list validation into block read callbacks"
(Joseph Qi)
Cleanup, simplify, and make more robust ocfs2's validation of extent
list fields (Kernel test robot loves mounting corrupted fs images!)
* tag 'mm-nonmm-stable-2026-04-15-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (127 commits)
ocfs2: validate group add input before caching
ocfs2: validate bg_bits during freefrag scan
ocfs2: fix listxattr handling when the buffer is full
doc: watchdog: fix typos etc
update Sean's email address
ocfs2: use get_random_u32() where appropriate
ocfs2: split transactions in dio completion to avoid credit exhaustion
ocfs2: remove redundant l_next_free_rec check in __ocfs2_find_path()
ocfs2: validate extent block list fields during block read
ocfs2: remove empty extent list check in ocfs2_dx_dir_lookup_rec()
ocfs2: validate dx_root extent list fields during block read
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
ocfs2: handle invalid dinode in ocfs2_group_extend
.get_maintainer.ignore: add Askar
ocfs2: validate bg_list extent bounds in discontig groups
checkpatch: exclude forward declarations of const structs
tools/accounting: handle truncated taskstats netlink messages
taskstats: set version in TGID exit notifications
ocfs2/heartbeat: fix slot mapping rollback leaks on error paths
arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
...
|
|
Recent changes to crypto and wifi made CMAC no longer
selected by default on x86 and tcp_ao needs it.
Add the missing config.
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260416010439.1053587-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test that verifies MSG_PEEK works correctly after a partial
recv().
This is to test a bug that was present in the
`virtio_transport_stream_do_peek()` when computing the number of bytes to
copy: After a partial read, the peek function didn't take into
consideration the number of bytes that were already read. So peeking the
whole buffer would cause an out-of-bounds read, that resulted in a -EFAULT.
This test does exactly this: do a partial recv on a buffer, then try to
peek the whole buffer content. The test re-uses
`test_stream_msg_peek_client()` to also cover this scenario.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260415-fix_peek-v4-3-8207e872759e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`recv_buf` does not handle the MSG_PEEK flag correctly: it keeps calling
`recv` until all requested bytes are available or an error occurs.
The problem is how it calculates the number of bytes read: MSG_PEEK
doesn't consume any bytes and will re-read the same bytes from the buffer
head, so summing the return value every time is wrong.
Moreover, MSG_PEEK doesn't consume the bytes in the buffer, so if more
bytes are requested than are available, the loop will never terminate,
because `recv` will never return EOF. For this reason, we need to compare
the number of bytes read with the number of bytes expected.
Add a check: if the MSG_PEEK flag is present, update the byte counter and
break out of the loop only after at least the expected number of bytes
have been received; otherwise, retry after a short delay to avoid
consuming too many CPU cycles.
This allows us to simplify the `test_stream_credit_update_test` by
reusing `recv_buf`, like some other tests already do.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260415-fix_peek-v4-2-8207e872759e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend trace_printk coverage to verify that UTF-8 literal text is
emitted successfully and that '%' parsing still rejects non-ASCII
bytes once format parsing starts.
Use an explicitly invalid format string for the negative case so the
ASCII-only parser expectation is visible from the test code itself.
Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-3-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_bprintf_prepare() only needs ASCII parsing for conversion
specifiers. Plain text can safely carry bytes >= 0x80, so allow
UTF-8 literals outside '%' sequences while keeping ASCII control
bytes rejected and format specifiers ASCII-only.
This keeps existing parsing rules for format directives unchanged,
while allowing helpers such as bpf_trace_printk() to emit UTF-8
literal text.
Update test_snprintf_negative() in the same commit so selftests keep
matching the new plain-text vs format-specifier split during bisection.
Fixes: 48cac3f4a96d ("bpf: Implement formatted output helpers with bstr_printf")
Signed-off-by: Yihan Ding <dingyihan@uniontech.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260416120142.1420646-2-dingyihan@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Verify that the verifier rejects a direct scalar write to a kptr map
value slot without crashing.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260416-kptr_crash-v1-2-5589356584b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 2964f6b816c2 ("selftests: Use ktap helpers for runner.sh") added a
number of bashisms and updated the interpreter specified for the script to
be /bin/bash to reflect this. Unfortunately this does not actually achieve
anything in production since the main way runner.sh is invoked is from the
top level run_kselftest.sh which sources it rather than running it as a
separate script and specifies the shell as /bin/sh. This means that on
systems where /bin/sh is not bash (such as Debian where /bin/sh defaults to
being dash) we see failures:
./run_kselftest.sh: 195: ./kselftest/runner.sh: Syntax error: "(" unexpected (expecting "}")
These bashisms come from this part of the change:
4. In runner.sh run_one(), get the return value and use ktap helpers for
all pass/fail reporting. This allows counting pass/fail numbers in the
main process.
which uses a bash array to track all the subtests being run. Convert this
to use a simple flat variable instead.
Link: https://lore.kernel.org/r/20260416-selftest-fix-readlink-e-v1-2-94e4cabbdec4@kernel.org
Fixes: 2964f6b816c2 ("selftests: Use ktap helpers for runner.sh")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 2964f6b816c2 ("selftests: Use ktap helpers for runner.sh") added an
import of ktap_helper.sh to runner.sh in order to standardise on these for
output formatting. Rather than build on the existing requirement for the
user to supply BASE_DIR to find the helpers it uses some magic which
features a use of "readlink -e". Unfortunately the -e option is a GNU
extension and is not available in at least busybox, meaning that runner.sh
starts failing:
./run_kselftest.sh: 5: ./kselftest/runner.sh: Bad substitution
./run_kselftest.sh: 5: .: cannot open ./ktap_helpers.sh: No such file
Fix this by using the already required BASE_DIR to locate the helper
library.
Link: https://lore.kernel.org/r/20260416-selftest-fix-readlink-e-v1-1-94e4cabbdec4@kernel.org
Fixes: 2964f6b816c2 ("selftests: Use ktap helpers for runner.sh")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 7e47389142b8 ("selftests: Preserve subtarget failures in
all/install") updated the propagation of errors from indivdual kselftest
targets to be similar to that seen with FORCE_TARGETS. While it would
be really nice to be in a position to do this currently it is premature
to do this as the default behaviour.
At present we default to trying to build all selftests but a combination
of code quality issues and build dependencies mean that it is almost
certain that at least one of them will fail to build (for example,
several depend on clang so don't work in a GCC container) and a top
level failure in the kselftest build reported. Further, the resulting
failures mean that the install target does not run at all so any build
problem is escallated to a complete failure to produce a kselftest
tarball so CI systems that run into issues loose all selftests coverage.
This has been causing disruption to a range of CI systems including
KernelCI, mine and Arm's internal one.
Revert the commit, users who need this behaviour should be able to use
FORCE_TARGETS for the time being. At present users that do this (such
as linux-next) are most likely building a subset of targets known to
succeed in their environments.
Link: https://lore.kernel.org/r/20260416-selftests-deescalate-error-reporting-v1-1-38e7c0536227@kernel.org
Fixes: 7e47389142b8 ("selftests: Preserve subtarget failures in all/install")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Add two new selftests
* tag 'livepatching-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: add test for module function patching
selftests: livepatch: test-ftrace: livepatch a traced function
|
|
Pull VFIO updates from Alex Williamson:
- Update QAT vfio-pci variant driver for Gen 5, 420xx devices (Vijay
Sundar Selvamani, Suman Kumar Chakraborty, Giovanni Cabiddu)
- Fix vfio selftest MMIO DMA mapping selftest (Alex Mastro)
- Conversions to const struct class in support of class_create()
deprecation (Jori Koolstra)
- Improve selftest compiler compatibility by avoiding initializer on
variable-length array (Manish Honap)
- Define new uAPI for drivers supporting migration to advise user-
space of new initial data for reducing target startup latency.
Implemented for mlx5 vfio-pci variant driver (Yishai Hadas)
- Enable vfio selftests on aarch64, not just cross-compiles reporting
arm64 (Ted Logan)
- Update vfio selftest driver support to include additional DSA devices
(Yi Lai)
- Unconditionally include debugfs root pointer in vfio device struct,
avoiding a build failure seen in hisi_acc variant driver without
debugfs otherwise (Arnd Bergmann)
- Add support for the s390 ISM (Internal Shared Memory) device via a
new variant driver. The device is unique in the size of its BAR space
(256TiB) and lack of mmap support (Julian Ruess)
- Enforce that vfio-pci drivers implement a name in their ops structure
for use in sequestering SR-IOV VFs (Alex Williamson)
- Prune leftover group notifier code (Paolo Bonzini)
- Fix Xe vfio-pci variant driver to avoid migration support as a
dependency in the reset path and missing release call (Michał
Winiarski)
* tag 'vfio-v7.1-rc1' of https://github.com/awilliam/linux-vfio: (23 commits)
vfio/xe: Add a missing vfio_pci_core_release_dev()
vfio/xe: Reorganize the init to decouple migration from reset
vfio: remove dead notifier code
vfio/pci: Require vfio_device_ops.name
MAINTAINERS: add VFIO ISM PCI DRIVER section
vfio/ism: Implement vfio_pci driver for ISM devices
vfio/pci: Rename vfio_config_do_rw() to vfio_pci_config_rw_single() and export it
vfio: unhide vdev->debug_root
vfio/qat: add support for Intel QAT 420xx VFs
vfio: selftests: Support DMR and GNR-D DSA devices
vfio: selftests: Build tests on aarch64
vfio/mlx5: Add REINIT support to VFIO_MIG_GET_PRECOPY_INFO
vfio/mlx5: consider inflight SAVE during PRE_COPY
net/mlx5: Add IFC bits for migration state
vfio: Adapt drivers to use the core helper vfio_check_precopy_ioctl
vfio: Add support for VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2
vfio: Define uAPI for re-init initial bytes during the PRE_COPY phase
vfio: selftests: Fix VLA initialisation in vfio_pci_irq_set()
vfio: uapi: fix comment typo
vfio: mdev: replace mtty_dev->vd_class with a const struct class
...
|
|
Add test cases that exercise the scenario where an IPv6 nexthop is
replaced with an IPv4 nexthop while being part of a group. The group's
has_v4 flag must be updated so that subsequent IPv6 route additions are
properly rejected.
Two cases are covered:
1. Gateway nexthop replaced across families with an existing IPv6
route on the group (rejected by fib6_check_nh_list).
2. Blackhole nexthop replaced across families with no existing IPv6
route on the group (fib6_check_nh_list returns early) — this is
the path that triggers a NULL ptr deref without the kernel fix.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260413114522.147784-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
|
|
Updating a sockmap from a unix iterator prog may lead to a deadlock.
Piggyback on the original selftest.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260414-unix-proto-update-null-ptr-deref-v4-3-2af6fe97918e@rbox.co
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix undef warning when WARNINGS_FILE is unset
The check_buildlog() references WARNINGS_FILE even when it's not set.
Perl triggers a warning in this case. Check if the WARNINGS_FILE is
defined before checking if the file it represents exists.
- Fix how LOG_FILE is resolved
LOG_FILE is expanded immediately after the config file is parsed. If
LOG_FILE depends on variables from the tests it will use stale values
instead of using the test variables. Have LOG_FILE also resolve test
variables.
- Treat a undefined self reference variable as empty
Variables can recursively include itself for appending. Currently, if
the references itself and it is not defined, it leaves the variable
in the define: "VAR = ${VAR} foo" keeps the ${VAR} around. Have it
removed instead.
- Fix clearing of variables per tests
If a variable has a defined default, a test can not clear it by
assigning the variable to empty. Fix this by clearing the variable
for a test when the test config has that variable assigned to
nothing.
- Fix run_command() to catch stderr in the shell command parsing
Switch to Perl list form open to use "sh -c" wrapper to run shell
commands to have the log file catch shell parsing errors.
- Fix console output during reboot cycle
The POWER_CYCLE callback during reboot() can miss output from the
next boot making ktest miss the boot string it was waiting for.
- Add PRE_KTEST_DIE for PRE_KTEST failures
If the command for PRE_KTEST fails, ktest does not fail (this was by
design as this command was used to add patches that may or may not
apply). Add PRE_KTEST_DIE value to force ktest to fail if PRE_KTEST
fails.
- Run POST_KTEST hooks on failure and cancellation
PRE_KTEST always runs before a ktest test, have POST_KTEST always run
after a test even if the test fails or is cancelled to do the
teardown of PRE_KTEST.
- Add a --dry-run mode
Add --dry-run to parse the config, print the results and exit without
running any of the tests.
- Store failures from the dodie() path as well
The STORE_FAILURES saves the logs on failure, but there's failure
paths that miss storing. Perform STORE_FAILURES in dodie() to capture
these failures too.
* tag 'ktest-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Store failure logs also in fatal paths
ktest: Add a --dry-run mode
ktest: Run POST_KTEST hooks on failure and cancellation
ktest: Add PRE_KTEST_DIE for PRE_KTEST failures
ktest: Stop dropping console output during power-cycle reboot
ktest: Run commands through list-form shell open
ktest: Honor empty per-test option overrides
ktest: Treat undefined self-reference as empty
ktest: Resolve LOG_FILE in test option context
ktest: Avoid undef warning when WARNINGS_FILE is unset
|
