summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2026-01-21selftests: net: amt: wait longer for connection before sending packetsTaehee Yoo
Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel connection between the gateway and the relay, and for the listener socket to be created in the LISTENER namespace. However, tests sometimes fail because packets are sent before the connection is fully established. Increase the waiting time to make the tests more reliable, and use wait_local_port_listen() to explicitly wait for the listener socket. Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-21selftests: netconsole: validate target resumeAndre Carvalho
Introduce a new netconsole selftest to validate that netconsole is able to resume a deactivated target when the low level interface comes back. The test setups the network using netdevsim, creates a netconsole target and then remove/add netdevsim in order to bring the same interfaces back. Afterwards, the test validates that the target works as expected. Targets are created via cmdline parameters to the module to ensure that we are able to resume targets that were bound by mac and interface name. Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Andre Carvalho <asantostc@gmail.com> Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-7-4de36aebcf48@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-21selftests/bpf: Fix resource leak in serial_test_wq on attach failureKery Qi
When wq__attach() fails, serial_test_wq() returns early without calling wq__destroy(), leaking the skeleton resources allocated by wq__open_and_load(). This causes ASAN leak reports in selftests runs. Fix this by jumping to a common clean_up label that calls wq__destroy() on all exit paths after successful open_and_load. Note that the early return after wq__open_and_load() failure is correct and doesn't need fixing, since that function returns NULL on failure (after internally cleaning up any partial allocations). Fixes: 8290dba51910 ("selftests/bpf: wq: add bpf_wq_start() checks") Signed-off-by: Kery Qi <qikeyu2017@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20260121094114.1801-3-qikeyu2017@gmail.com
2026-01-21selftests/pidfd: fix typo in commentZiyu Chen
Fix the typo "untill" → "until" in a comment in pidfd_info_test.c. This typo is already listed in scripts/spelling.txt by commit 66b47b4a9dad ("checkpatch: look for common misspellings"). Link: https://lore.kernel.org/r/20260121094147.4187337-1-chenziyu@uniontech.com Suggested-by: Cryolitia PukNgae <cryolitia@uniontech.com> Signed-off-by: Ziyu Chen <chenziyu@uniontech.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2026-01-21selftests/bpf: Test kfunc bpf_strncasecmpYuzuki Ishiyama
Add testsuites for kfunc bpf_strncasecmp. Signed-off-by: Yuzuki Ishiyama <ishiyama@hpc.is.uec.ac.jp> Acked-by: Viktor Malik <vmalik@redhat.com> Link: https://lore.kernel.org/r/20260121033328.1850010-3-ishiyama@hpc.is.uec.ac.jp Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-21selftests/bpf: test bpf_get_func_arg() for tp_btfMenglong Dong
Test bpf_get_func_arg() and bpf_get_func_arg_cnt() for tp_btf. The code is most copied from test1 and test2. Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20260121044348.113201-3-dongml2@chinatelecom.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-21selftests/ublk: fix garbage output in foreground modeMing Lei
Initialize _evtfd to -1 in struct dev_ctx to prevent garbage output when running kublk in foreground mode. Without this, _evtfd is zero-initialized to 0 (stdin), and ublk_send_dev_event() writes binary data to stdin which appears as garbage on the terminal. Also fix debug message format string. Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-01-21selftests/ublk: fix error handling for starting deviceMing Lei
Fix error handling in ublk_start_daemon() when start_dev fails: 1. Call ublk_ctrl_stop_dev() to cancel inflight uring_cmd before cleanup. Without this, the device deletion may hang waiting for I/O completion that will never happen. 2. Add fail_start label so that pthread_join() is called on the error path. This ensures proper thread cleanup when startup fails. Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-01-21selftests/ublk: fix IO thread idle checkMing Lei
Include cmd_inflight in ublk_thread_is_done() check. Without this, the thread may exit before all FETCH commands are completed, which may cause device deletion to hang. Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-01-20selftests/bpf: test the jited inline of bpf_get_current_taskMenglong Dong
Add the testcase for the jited inline of bpf_get_current_task(). Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20260120070555.233486-3-dongml2@chinatelecom.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20watchdog: softlockup: panic when lockup duration exceeds N thresholdsLi RongQing
The softlockup_panic sysctl is currently a binary option: panic immediately or never panic on soft lockups. Panicking on any soft lockup, regardless of duration, can be overly aggressive for brief stalls that may be caused by legitimate operations. Conversely, never panicking may allow severe system hangs to persist undetected. Extend softlockup_panic to accept an integer threshold, allowing the kernel to panic only when the normalized lockup duration exceeds N watchdog threshold periods. This provides finer-grained control to distinguish between transient delays and persistent system failures. The accepted values are: - 0: Don't panic (unchanged) - 1: Panic when duration >= 1 * threshold (20s default, original behavior) - N > 1: Panic when duration >= N * threshold (e.g., 2 = 40s, 3 = 60s.) The original behavior is preserved for values 0 and 1, maintaining full backward compatibility while allowing systems to tolerate brief lockups while still catching severe, persistent hangs. [lirongqing@baidu.com: v2] Link: https://lkml.kernel.org/r/20251218074300.4080-1-lirongqing@baidu.com Link: https://lkml.kernel.org/r/20251216074521.2796-1-lirongqing@baidu.com Signed-off-by: Li RongQing <lirongqing@baidu.com> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Hao Luo <haoluo@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Lance Yang <lance.yang@linux.dev> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Song Liu <song@kernel.org> Cc: Stanislav Fomichev <sdf@fomichev.me> Cc: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20selftests/mm: fix comment for check_test_requirementsChunyu Hu
The test supports arm64 as well so the comment is incorrect. And there's a check for arm64 in va_high_addr_switch.c. Link: https://lkml.kernel.org/r/20251221040025.3159990-5-chuhu@redhat.com Fixes: 983e760bcdb6 ("selftest/mm: va_high_addr_switch: add ppc64 support check") Fixes: f556acc2facd ("selftests/mm: skip test for non-LPA2 and non-LVA systems") Signed-off-by: Chunyu Hu <chuhu@redhat.com> Reviewed-by: Luiz Capitulino <luizcap@redhat.com> Cc: "David Hildenbrand (Red Hat)" <david@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20selftests/mm: va_high_addr_switch return fail when either test failedChunyu Hu
When the first test failed, and the hugetlb test passed, the result would be pass, but we expect a fail. Fix this issue by returning fail if either is not KSFT_PASS. Link: https://lkml.kernel.org/r/20251221040025.3159990-4-chuhu@redhat.com Signed-off-by: Chunyu Hu <chuhu@redhat.com> Reviewed-by: Luiz Capitulino <luizcap@redhat.com> Cc: "David Hildenbrand (Red Hat)" <david@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20selftests/mm: remove arm64 nr_hugepages setup for va_high_addr_switch testChunyu Hu
arm64 and x86_64 has the same nr_hugepages requriement for running the va_high_addr_switch test. Since commit d9d957bd7b61 ("selftests/mm: alloc hugepages in va_high_addr_switch test"), the setup can be done in va_high_addr_switch.sh. So remove the duplicated setup. Link: https://lkml.kernel.org/r/20251221040025.3159990-3-chuhu@redhat.com Signed-off-by: Chunyu Hu <chuhu@redhat.com> Reviewed-by: Luiz Capitulino <luizcap@redhat.com> Cc: Luiz Capitulino <luizcap@redhat.com> Cc: "David Hildenbrand (Red Hat)" <david@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20selftests/mm: allocate 6 hugepages in va_high_addr_switch.shChunyu Hu
The va_high_addr_switch test requires 6 hugepages, not 5. If running the test directly by: ./va_high_addr_switch.sh, the test will hit a mmap 'FAIL' caused by not enough hugepages: mmap(addr_switch_hint - hugepagesize, 2*hugepagesize, MAP_HUGETLB): 0x7f330f800000 - OK mmap(addr_switch_hint , 2*hugepagesize, MAP_FIXED | MAP_HUGETLB): 0xffffffffffffffff - FAILED The failure can't be hit if run the tests by running 'run_vmtests.sh -t hugevm' because the nr_hugepages is set to 128 at the beginning of run_vmtests.sh and va_high_addr_switch.sh skip the setup of nr_hugepages because already enough. Link: https://lkml.kernel.org/r/20251221040025.3159990-2-chuhu@redhat.com Fixes: d9d957bd7b61 ("selftests/mm: alloc hugepages in va_high_addr_switch test") Signed-off-by: Chunyu Hu <chuhu@redhat.com> Reviewed-by: Luiz Capitulino <luizcap@redhat.com> Cc: "David Hildenbrand (Red Hat)" <david@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20selftests/mm: fix va_high_addr_switch.sh return valueChunyu Hu
Patch series "Fix va_high_addr_switch.sh test failure - again", v2. The series address several issues exist for the va_high_addr_switch test: 1) the test return value is ignored in va_high_addr_switch.sh. 2) the va_high_addr_switch test requires 6 hugepages not 5. 3) the reurn value of the first test in va_high_addr_switch.c can be overridden by the second test. 4) the nr_hugepages setup in run_vmtests.sh for arm64 can be done in va_high_addr_switch.sh too. 5) update a comment for check_test_requirements. This patch: (of 5) The return value should be return value of va_high_addr_switch, otherwise a test failure would be silently ignored. Link: https://lkml.kernel.org/r/20251221040025.3159990-1-chuhu@redhat.com Fixes: d9d957bd7b61 ("selftests/mm: alloc hugepages in va_high_addr_switch test") Signed-off-by: Chunyu Hu <chuhu@redhat.com> Reviewed-by: Luiz Capitulino <luizcap@redhat.com> Cc: Luiz Capitulino <luizcap@redhat.com> Cc: "David Hildenbrand (Red Hat)" <david@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20selftests/mm/charge_reserved_hugetlb.sh: add waits with timeout helperLi Wang
The hugetlb cgroup usage wait loops in charge_reserved_hugetlb.sh were unbounded and could hang forever if the expected cgroup file value never appears (e.g. due to write_to_hugetlbfs in Error mapping). === Error log === # uname -r 6.12.0-xxx.el10.aarch64+64k # ls /sys/kernel/mm/hugepages/hugepages-* hugepages-16777216kB/ hugepages-2048kB/ hugepages-524288kB/ #./charge_reserved_hugetlb.sh -cgroup-v2 # ----------------------------------------- ... # nr hugepages = 10 # writing cgroup limit: 5368709120 # writing reseravation limit: 5368709120 ... # write_to_hugetlbfs: Error mapping the file: Cannot allocate memory # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 ... Introduce a small helper, wait_for_file_value(), and use it for: - waiting for reservation usage to drop to 0, - waiting for reservation usage to reach a given size, - waiting for fault usage to reach a given size. This makes the waits consistent and adds a hard timeout (60 tries with 1s sleep) so the test fails instead of stalling indefinitely. Link: https://lkml.kernel.org/r/20251221122639.3168038-4-liwang@redhat.com Signed-off-by: Li Wang <liwang@redhat.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20selftests/mm/charge_reserved_hugetlb: drop mount size for hugetlbfsLi Wang
charge_reserved_hugetlb.sh mounts a hugetlbfs instance at /mnt/huge with a fixed size of 256M. On systems with large base hugepages (e.g. 512MB), this is smaller than a single hugepage, so the hugetlbfs mount ends up with zero capacity (often visible as size=0 in mount output). As a result, write_to_hugetlbfs fails with ENOMEM and the test can hang waiting for progress. === Error log === # uname -r 6.12.0-xxx.el10.aarch64+64k #./charge_reserved_hugetlb.sh -cgroup-v2 # ----------------------------------------- ... # nr hugepages = 10 # writing cgroup limit: 5368709120 # writing reseravation limit: 5368709120 ... # write_to_hugetlbfs: Error mapping the file: Cannot allocate memory # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 # Waiting for hugetlb memory reservation to reach size 2684354560. # 0 ... # mount |grep /mnt/huge none on /mnt/huge type hugetlbfs (rw,relatime,seclabel,pagesize=512M,size=0) # grep -i huge /proc/meminfo ... HugePages_Total: 10 HugePages_Free: 10 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 524288 kB Hugetlb: 5242880 kB Drop the mount args with 'size=256M', so the filesystem capacity is sufficient regardless of HugeTLB page size. Link: https://lkml.kernel.org/r/20251221122639.3168038-3-liwang@redhat.com Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests") Signed-off-by: Li Wang <liwang@redhat.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20selftests/mm/write_to_hugetlbfs: parse -s as size_tLi Wang
Patch series "selftests/mm: hugetlb cgroup charging: robustness fixes", v3. This series fixes a few issues in the hugetlb cgroup charging selftests (write_to_hugetlbfs.c + charge_reserved_hugetlb.sh) that show up on systems with large hugepages (e.g. 512MB) and when failures cause the test to wait indefinitely. On an aarch64 64k page kernel with 512MB hugepages, the test consistently fails in write_to_hugetlbfs with ENOMEM and then hangs waiting for the expected usage values. The root cause is that charge_reserved_hugetlb.sh mounts hugetlbfs with a fixed size=256M, which is smaller than a single hugepage, resulting in a mount with size=0 capacity. In addition, write_to_hugetlbfs previously parsed -s via atoi() into an int, which can overflow and print negative sizes. Reproducer / environment: - Kernel: 6.12.0-xxx.el10.aarch64+64k - Hugepagesize: 524288 kB (512MB) - ./charge_reserved_hugetlb.sh -cgroup-v2 - Observed mount: pagesize=512M,size=0 before this series After applying the series, the test completes successfully on the above setup. This patch (of 3): write_to_hugetlbfs currently parses the -s size argument with atoi() into an int. This silently accepts malformed input, cannot report overflow, and can truncate large sizes. === Error log === # uname -r 6.12.0-xxx.el10.aarch64+64k # ls /sys/kernel/mm/hugepages/hugepages-* hugepages-16777216kB/ hugepages-2048kB/ hugepages-524288kB/ #./charge_reserved_hugetlb.sh -cgroup-v2 # ----------------------------------------- ... # nr hugepages = 10 # writing cgroup limit: 5368709120 # writing reseravation limit: 5368709120 ... # Writing to this path: /mnt/huge/test # Writing this size: -1610612736 <-------- Switch the size variable to size_t and parse -s with sscanf("%zu", ...). Also print the size using %zu. This avoids incorrect behavior with large -s values and makes the utility more robust. Link: https://lkml.kernel.org/r/20251221122639.3168038-1-liwang@redhat.com Link: https://lkml.kernel.org/r/20251221122639.3168038-2-liwang@redhat.com Signed-off-by: Li Wang <liwang@redhat.com> Acked-by: David Hildenbrand (Red Hat) <david@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Cc: David Hildenbrand <david@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20lib/test_vmalloc.c: minor fixes to test_vmalloc.cAudra Mitchell
If PAGE_SIZE is larger than 4k and if you have a system with a large number of CPUs, this test can require a very large amount of memory leading to oom-killer firing. Given the type of allocation, the kernel won't have anything to kill, causing the system to stall. Add a parameter to the test_vmalloc driver to represent the number of times a percpu object will be allocated. Calculate this in test_vmalloc.sh to be 90% of available memory or the current default of 35000, whichever is smaller. Link: https://lkml.kernel.org/r/20251201181848.1216197-1-audra@redhat.com Signed-off-by: Audra Mitchell <audra@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Rafael Aquini <raquini@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20selftests: drv-net: fix missing include in ncdevmemJakub Kicinski
Commit ca9d74eb5f6a ("uapi: add INT_MAX and INT_MIN constants") recently removed some includes of limits.h in uAPI headers. ncdevmem.c was depending on them: ncdevmem.c: In function ‘ethtool_add_flow’: ncdevmem.c:369:60: error: ‘INT_MAX’ undeclared (first use in this function) 369 | if (endptr == id_start || flow_id < 0 || flow_id > INT_MAX) | ^~~~~~~ ncdevmem.c:77:1: note: ‘INT_MAX’ is defined in header ‘<limits.h>’; did you forget to ‘#include <limits.h>’? Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20260120180319.1673271-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-20selftests: drv-net: extend HW timestamp test with ioctlVadim Fedorenko
Extend HW timestamp tests to check that ioctl interface is not broken and configuration setups and requests are equal to netlink interface. Some linter warnings are disabled because of ctypes classes. Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20260116062121.1230184-2-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-20Merge tag 'net-queue-rx-buf-len-v9' of https://github.com/isilence/linuxJakub Kicinski
Pavel Begunkov says: ==================== Add support for providers with large rx buffer Many modern NICs support configurable receive buffer lengths, and zcrx and memory providers can use buffers larger than 4K to improve performance. When paired with hw-gro larger rx buffer sizes can drastically reduce the number of buffers traversing the stack and save a lot of processing time. It also allows to give to users larger contiguous chunks of data. Single stream benchmarks showed up to ~30% CPU util improvement. E.g. comparison for 4K vs 32K buffers using a 200Gbit NIC: packets=23987040 (MB=2745098), rps=199559 (MB/s=22837) CPU %usr %nice %sys %iowait %irq %soft %idle 0 1.53 0.00 27.78 2.72 1.31 66.45 0.22 packets=24078368 (MB=2755550), rps=200319 (MB/s=22924) CPU %usr %nice %sys %iowait %irq %soft %idle 0 0.69 0.00 8.26 31.65 1.83 57.00 0.57 This series adds net infrastructure for memory providers configuring the size and implements it for bnxt. It's an opt-in feature for drivers, they should advertise support for the parameter in the qops and must check if the hardware supports the given size. It's limited to memory providers as it drastically simplifies implementation. It doesn't affect the fast path zcrx uAPI, and the user exposed parameter is defined in zcrx terms, which allows it to be flexible and adjusted in the future. A liburing example can be found at [2] full branch: [1] https://github.com/isilence/linux.git zcrx/large-buffers-v8 Liburing example: [2] https://github.com/isilence/liburing.git zcrx/rx-buf-len * tag 'net-queue-rx-buf-len-v9' of https://github.com/isilence/linux: io_uring/zcrx: document area chunking parameter selftests: iou-zcrx: test large chunk sizes eth: bnxt: support qcfg provided rx page size eth: bnxt: adjust the fill level of agg queues with larger buffers eth: bnxt: store rx buffer size per queue net: pass queue rx page size from memory provider net: add bare bone queue configs net: reduce indent of struct netdev_queue_mgmt_ops members net: memzero mp params when closing a queue ==================== Link: https://patch.msgid.link/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-20Revert "Merge branch 'netkit-support-for-io_uring-zero-copy-and-af_xdp'"Jakub Kicinski
This reverts commit 77b9c4a438fc66e2ab004c411056b3fb71a54f2c, reversing changes made to 4515ec4ad58a37e70a9e1256c0b993958c9b7497: 931420a2fc36 ("selftests/net: Add netkit container tests") ab771c938d9a ("selftests/net: Make NetDrvContEnv support queue leasing") 6be87fbb2776 ("selftests/net: Add env for container based tests") 61d99ce3dfc2 ("selftests/net: Add bpf skb forwarding program") 920da3634194 ("netkit: Add xsk support for af_xdp applications") eef51113f8af ("netkit: Add netkit notifier to check for unregistering devices") b5ef109d22d4 ("netkit: Implement rtnl_link_ops->alloc and ndo_queue_create") b5c3fa4a0b16 ("netkit: Add single device mode for netkit") 0073d2fd679d ("xsk: Proxy pool management for leased queues") 1ecea95dd3b5 ("xsk: Extend xsk_rcv_check validation") 804bf334d08a ("net: Proxy netdev_queue_get_dma_dev for leased queues") 0caa9a8ddec3 ("net: Proxy net_mp_{open,close}_rxq for leased queues") ff8889ff9107 ("net, ethtool: Disallow leased real rxqs to be resized") 9e2103f36110 ("net: Add lease info to queue-get response") 31127deddef4 ("net: Implement netdev_nl_queue_create_doit") a5546e18f77c ("net: Add queue-create operation") The series will conflict with io_uring work, and the code needs more polish. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-20selftests/bpf: update verifier test for default trusted pointer semanticsMatt Bobrowski
Replace the verifier test for default trusted pointer semantics, which previously relied on BPF kfunc bpf_get_root_mem_cgroup(), with a new test utilizing dedicated BPF kfuncs defined within the bpf_testmod. bpf_get_root_mem_cgroup() was modified such that it again relies on KF_ACQUIRE semantics, therefore no longer making it a suitable candidate to test BPF verifier default trusted pointer semantics against. Link: https://lore.kernel.org/bpf/20260113083949.2502978-2-mattbobrowski@google.com Signed-off-by: Matt Bobrowski <mattbobrowski@google.com> Link: https://lore.kernel.org/r/20260120091630.3420452-1-mattbobrowski@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20selftests/bpf: Add tests for BPF_DIV and BPF_MOD range trackingYazhou Tang
Now BPF_DIV has range tracking support via interval analysis. This patch adds selftests to cover various cases of BPF_DIV and BPF_MOD operations when the divisor is a constant, also covering both signed and unsigned variants. This patch includes several types of tests in 32-bit and 64-bit variants: 1. For UDIV - positive divisor - zero divisor 2. For SDIV - positive divisor, positive dividend - positive divisor, negative dividend - positive divisor, mixed sign dividend - negative divisor, positive dividend - negative divisor, negative dividend - negative divisor, mixed sign dividend - zero divisor - overflow (SIGNED_MIN/-1), normal dividend - overflow (SIGNED_MIN/-1), constant dividend 3. For UMOD - positive divisor - positive divisor, small dividend - zero divisor 4. For SMOD - positive divisor, positive dividend - positive divisor, negative dividend - positive divisor, mixed sign dividend - positive divisor, mixed sign dividend, small dividend - negative divisor, positive dividend - negative divisor, negative dividend - negative divisor, mixed sign dividend - negative divisor, mixed sign dividend, small dividend - zero divisor - overflow (SIGNED_MIN/-1), normal dividend - overflow (SIGNED_MIN/-1), constant dividend Specifically, these selftests are based on dead code elimination: If the BPF verifier can precisely analyze the result of BPF_DIV/BPF_MOD instruction, it can prune the path that leads to an error (here we use invalid memory access as the error case), allowing the program to pass verification. Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com> Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com> Co-developed-by: Tianci Cao <ziye@zju.edu.cn> Signed-off-by: Tianci Cao <ziye@zju.edu.cn> Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com> Link: https://lore.kernel.org/r/20260119085458.182221-3-tangyazhou@zju.edu.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20bpf: Add range tracking for BPF_DIV and BPF_MODYazhou Tang
This patch implements range tracking (interval analysis) for BPF_DIV and BPF_MOD operations when the divisor is a constant, covering both signed and unsigned variants. While LLVM typically optimizes integer division and modulo by constants into multiplication and shift sequences, this optimization is less effective for the BPF target when dealing with 64-bit arithmetic. Currently, the verifier does not track bounds for scalar division or modulo, treating the result as "unbounded". This leads to false positive rejections for safe code patterns. For example, the following code (compiled with -O2): ```c int test(struct pt_regs *ctx) { char buffer[6] = {1}; __u64 x = bpf_ktime_get_ns(); __u64 res = x % sizeof(buffer); char value = buffer[res]; bpf_printk("res = %llu, val = %d", res, value); return 0; } ``` Generates a raw `BPF_MOD64` instruction: ```asm ; __u64 res = x % sizeof(buffer); 1: 97 00 00 00 06 00 00 00 r0 %= 0x6 ; char value = buffer[res]; 2: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0x0 ll 4: 0f 01 00 00 00 00 00 00 r1 += r0 5: 91 14 00 00 00 00 00 00 r4 = *(s8 *)(r1 + 0x0) ``` Without this patch, the verifier fails with "math between map_value pointer and register with unbounded min value is not allowed" because it cannot deduce that `r0` is within [0, 5]. According to the BPF instruction set[1], the instruction's offset field (`insn->off`) is used to distinguish between signed (`off == 1`) and unsigned division (`off == 0`). Moreover, we also follow the BPF division and modulo runtime behavior (semantics) to handle special cases, such as division by zero and signed division overflow. - UDIV: dst = (src != 0) ? (dst / src) : 0 - SDIV: dst = (src == 0) ? 0 : ((src == -1 && dst == LLONG_MIN) ? LLONG_MIN : (dst / src)) - UMOD: dst = (src != 0) ? (dst % src) : dst - SMOD: dst = (src == 0) ? dst : ((src == -1 && dst == LLONG_MIN) ? 0: (dst s% src)) Here is the overview of the changes made in this patch (See the code comments for more details and examples): 1. For BPF_DIV: Firstly check whether the divisor is zero. If so, set the destination register to zero (matching runtime behavior). For non-zero constant divisors: goto `scalar(32)?_min_max_(u|s)div` functions. - General cases: compute the new range by dividing max_dividend and min_dividend by the constant divisor. - Overflow case (SIGNED_MIN / -1) in signed division: mark the result as unbounded if the dividend is not a single number. 2. For BPF_MOD: Firstly check whether the divisor is zero. If so, leave the destination register unchanged (matching runtime behavior). For non-zero constant divisors: goto `scalar(32)?_min_max_(u|s)mod` functions. - General case: For signed modulo, the result's sign matches the dividend's sign. And the result's absolute value is strictly bounded by `min(abs(dividend), abs(divisor) - 1)`. - Special care is taken when the divisor is SIGNED_MIN. By casting to unsigned before negation and subtracting 1, we avoid signed overflow and correctly calculate the maximum possible magnitude (`res_max_abs` in the code). - "Small dividend" case: If the dividend is already within the possible result range (e.g., [-2, 5] % 10), the operation is an identity function, and the destination register remains unchanged. 3. In `scalar(32)?_min_max_(u|s)(div|mod)` functions: After updating current range, reset other ranges and tnum to unbounded/unknown. e.g., in `scalar_min_max_sdiv`, signed 64-bit range is updated. Then reset unsigned 64-bit range and 32-bit range to unbounded, and tnum to unknown. Exception: in BPF_MOD's "small dividend" case, since the result remains unchanged, we do not reset other ranges/tnum. 4. Also updated existing selftests based on the expected BPF_DIV and BPF_MOD behavior. [1] https://www.kernel.org/doc/Documentation/bpf/standardization/instruction-set.rst Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com> Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com> Co-developed-by: Tianci Cao <ziye@zju.edu.cn> Signed-off-by: Tianci Cao <ziye@zju.edu.cn> Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com> Tested-by: syzbot@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20260119085458.182221-2-tangyazhou@zju.edu.cn Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20selftests/bpf: Migrate struct_ops_assoc test to KF_IMPLICIT_ARGSIhor Solodrai
A test kfunc named bpf_kfunc_multi_st_ops_test_1_impl() is a user of __prog suffix. Subsequent patch removes __prog support in favor of KF_IMPLICIT_ARGS, so migrate this kfunc to use implicit argument. Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://lore.kernel.org/r/20260120222638.3976562-12-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20bpf: Migrate bpf_stream_vprintk() to KF_IMPLICIT_ARGSIhor Solodrai
Implement bpf_stream_vprintk with an implicit bpf_prog_aux argument, and remote bpf_stream_vprintk_impl from the kernel. Update the selftests to use the new API with implicit argument. bpf_stream_vprintk macro is changed to use the new bpf_stream_vprintk kfunc, and the extern definition of bpf_stream_vprintk_impl is replaced accordingly. Reviewed-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://lore.kernel.org/r/20260120222638.3976562-11-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20bpf: Migrate bpf_task_work_schedule_* kfuncs to KF_IMPLICIT_ARGSIhor Solodrai
Implement bpf_task_work_schedule_* with an implicit bpf_prog_aux argument, and remove corresponding _impl funcs from the kernel. Update special kfunc checks in the verifier accordingly. Update the selftests to use the new API with implicit argument. Reviewed-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://lore.kernel.org/r/20260120222638.3976562-10-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20HID: Use bpf_wq_set_callback kernel functionIhor Solodrai
Remove extern declaration of bpf_wq_set_callback_impl() from hid_bpf_helpers.h and replace bpf_wq_set_callback macro with a corresponding new declaration. Tested with: # append tools/testing/selftests/hid/config and build the kernel $ make -C tools/testing/selftests/hid # in built kernel $ ./tools/testing/selftests/hid/hid_bpf -t test_multiply_events_wq TAP version 13 1..1 # Starting 1 tests from 1 test cases. # RUN hid_bpf.test_multiply_events_wq ... [ 2.575520] hid-generic 0003:0001:0A36.0001: hidraw0: USB HID v0.00 Device [test-uhid-device-138] on 138 # OK hid_bpf.test_multiply_events_wq ok 1 hid_bpf.test_multiply_events_wq # PASSED: 1 / 1 tests passed. # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0 PASS Acked-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://lore.kernel.org/r/20260120222638.3976562-9-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20bpf: Migrate bpf_wq_set_callback_impl() to KF_IMPLICIT_ARGSIhor Solodrai
Implement bpf_wq_set_callback() with an implicit bpf_prog_aux argument, and remove bpf_wq_set_callback_impl(). Update special kfunc checks in the verifier accordingly. Reviewed-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://lore.kernel.org/r/20260120222638.3976562-8-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20selftests/bpf: Add tests for KF_IMPLICIT_ARGSIhor Solodrai
Add trivial end-to-end tests to validate that KF_IMPLICIT_ARGS flag is properly handled by both resolve_btfids and the verifier. Declare kfuncs in bpf_testmod. Check that bpf_prog_aux pointer is set in the kfunc implementation. Verify that calls with implicit args and a legacy case all work. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://lore.kernel.org/r/20260120222638.3976562-7-ihor.solodrai@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2026-01-20selftests/bpf: Add perfbuf multi-producer benchmarkGyutae Bae
Add a multi-producer benchmark for perfbuf to complement the existing ringbuf multi-producer test. Unlike ringbuf which uses a shared buffer and experiences contention, perfbuf uses per-CPU buffers so the test measures scaling behavior rather than contention. This allows developers to compare perfbuf vs ringbuf performance under multi-producer workloads when choosing between the two for their systems. Signed-off-by: Gyutae Bae <gyutae.bae@navercorp.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260120090716.82927-1-gyutae.opensource@navercorp.com
2026-01-20kunit: add bash completionRyota Sakamoto
Currently, kunit.py has many subcommands and options, making it difficult to remember them without checking the help message. Add --list-cmds and --list-opts to kunit.py to get available commands and options, use those outputs in kunit-completion.sh to show completion. This implementation is similar to perf and tools/perf/perf-completion.sh. Example output: $ source tools/testing/kunit/kunit-completion.sh $ ./tools/testing/kunit/kunit.py [TAB][TAB] build config exec parse run $ ./tools/testing/kunit/kunit.py run --k[TAB][TAB] --kconfig_add --kernel_args --kunitconfig Link: https://lore.kernel.org/r/20260117-kunit-completion-v2-1-cabd127d0801@gmail.com Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2026-01-20vsock/test: Do not filter kallsyms by symbol typeMichal Luczaj
Blamed commit implemented logic to discover available vsock transports by grepping /proc/kallsyms for known symbols. It incorrectly filtered entries by type 'd'. For some kernel configs having CONFIG_VIRTIO_VSOCKETS=m CONFIG_VSOCKETS_LOOPBACK=y kallsyms reports 0000000000000000 d virtio_transport [vmw_vsock_virtio_transport] 0000000000000000 t loopback_transport Overzealous filtering might have affected vsock test suit, resulting in insufficient/misleading testing. Do not filter symbols by type. It never helped much. Fixes: 3070c05b7afd ("vsock/test: Introduce get_transports()") Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20260116-vsock_test-kallsyms-grep-v1-1-3320bc3346f2@rbox.co Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-20selftests/net: Add netkit container testsDavid Wei
Add two tests using NetDrvContEnv. One basic test that sets up a netkit pair, with one end in a netns. Use LOCAL_PREFIX_V6 and nk_forward BPF program to ping from a remote host to the netkit in netns. Second is a selftest for netkit queue leasing, using io_uring zero copy test binary inside of a netns with netkit. This checks that memory providers can be bound against virtual queues in a netkit within a netns that are leasing from a physical netdev in the default netns. Signed-off-by: David Wei <dw@davidwei.uk> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260115082603.219152-17-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-20selftests/net: Make NetDrvContEnv support queue leasingDavid Wei
Add a new parameter `lease` to NetDrvContEnv that sets up queue leasing in the env. The NETIF also has some ethtool parameters changed to support memory provider tests. This is needed in NetDrvContEnv rather than individual test cases since the cleanup to restore NETIF can't be done, until the netns in the env is gone. Signed-off-by: David Wei <dw@davidwei.uk> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260115082603.219152-16-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-20selftests/net: Add env for container based testsDavid Wei
Add an env NetDrvContEnv for container based selftests. This automates the setup of a netns, netkit pair with one inside the netns, and a BPF program that forwards skbs from the NETIF host inside the container. Currently only netkit is used, but other virtual netdevs e.g. veth can be used too. Expect netkit container datapath selftests to have a publicly routable IP prefix to assign to netkit in a container, such that packets will land on eth0. The BPF skb forward program will then forward such packets from the host netns to the container netns. Signed-off-by: David Wei <dw@davidwei.uk> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260115082603.219152-15-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-20selftests/net: Add bpf skb forwarding programDavid Wei
Add nk_forward.bpf.c, a BPF program that forwards skbs matching some IPv6 prefix received on eth0 ifindex to a specified netkit ifindex. This will be needed by netkit container tests. Signed-off-by: David Wei <dw@davidwei.uk> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260115082603.219152-14-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-19selftests/tc-testing: Try to add teql as a child qdiscVictor Nogueira
Add a selftest that attempts to add a teql qdisc as a qfq child. Since teql _must_ be added as a root qdisc, the kernel should reject this. Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20260114160243.913069-4-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-19selftests: net: csum: Fix printk format in recv_get_packet_csum_status()Christophe Leroy (CS GROUP)
Following warning is encountered when building selftests on powerpc/32. CC csum csum.c: In function 'recv_get_packet_csum_status': csum.c:710:50: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Wformat=] 710 | error(1, 0, "cmsg: len=%lu expected=%lu", | ~~^ | | | long unsigned int | %u 711 | cm->cmsg_len, CMSG_LEN(sizeof(struct tpacket_auxdata))); | ~~~~~~~~~~~~ | | | size_t {aka unsigned int} csum.c:710:63: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=] 710 | error(1, 0, "cmsg: len=%lu expected=%lu", | ~~^ | | | long unsigned int | %u cm->cmsg_len has type __kernel_size_t and CMSG() macro has the type returned by sizeof() which is size_t. size_t is 'unsigned int' on some platforms and 'unsigned long' on other ones so use %zu instead of %lu. The code in question was introduced by commit 91a7de85600d ("selftests/net: add csum offload test"). Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/8b69b40826553c1dd500d9d25e45883744f3f348.1768556791.git.chleroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-19selftests: net: simple selftest for ipvtapDmitry Skorodumov
This is a simple ipvtap test to test handling IP-address add/remove on ipvlan interface. It creates a veth-interface and then creates several network-namespace with ipvlan0 interface in it linked to veth. Then it starts to add/remove addresses on ipvlan0 interfaces in several threads. At finish, it checks that there is no duplicated addresses. Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com> Link: https://patch.msgid.link/20260112142417.4039566-3-skorodumov.dmitry@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-19vfio: selftests: Drop IOMMU mapping size assertions for VFIO_TYPE1_IOMMUDavid Matlack
Drop the assertions about IOMMU mappings sizes for VFIO_TYPE1_IOMMU modes (both the VFIO mode and the iommufd compatibility mode). These assertions fail when CONFIG_IOMMUFD_VFIO_CONTAINER is enabled, since iommufd compatibility mode provides different huge page behavior than VFIO for VFIO_TYPE1_IOMMU. VFIO_TYPE1_IOMMU is an old enough interface that it's not worth changing the behavior of VFIO and iommufd to match nor care about the IOMMU mapping sizes. Cc: Jason Gunthorpe <jgg@ziepe.ca> Link: https://lore.kernel.org/kvm/20260109143830.176dc279@shazbot.org/ Signed-off-by: David Matlack <dmatlack@google.com> Link: https://lore.kernel.org/r/20260114211252.2581145-1-dmatlack@google.com Signed-off-by: Alex Williamson <alex@shazbot.org>
2026-01-19vfio: selftests: Add vfio_dma_mapping_mmio_testAlex Mastro
Test IOMMU mapping the BAR mmaps created during vfio_pci_device_setup(). All IOMMU modes are tested: vfio_type1 variants are expected to succeed, while non-type1 modes are expected to fail. iommufd compat mode can be updated to expect success once kernel support lands. Native iommufd will not support mapping vaddrs backed by MMIO (it will support dma-buf based MMIO mapping instead). Signed-off-by: Alex Mastro <amastro@fb.com> Reviewed-by: David Matlack <dmatlack@google.com> Tested-by: David Matlack <dmatlack@google.com> Link: https://lore.kernel.org/r/20260114-map-mmio-test-v3-3-44e036d95e64@fb.com Signed-off-by: Alex Williamson <alex@shazbot.org>
2026-01-19vfio: selftests: Align BAR mmaps for efficient IOMMU mappingAlex Mastro
Update vfio_pci_bar_map() to align BAR mmaps for efficient huge page mappings. The manual mmap alignment can be removed once mmap(!MAP_FIXED) on vfio device fds improves to automatically return well-aligned addresses. Also add MADV_HUGEPAGE, which encourages the kernel to use huge pages (e.g. when /sys/kernel/mm/transparent_hugepage/enabled is set to "madvise"). Drop MAP_FILE from mmap(). It is an ignored compatibility flag. Signed-off-by: Alex Mastro <amastro@fb.com> Reviewed-by: David Matlack <dmatlack@google.com> Tested-by: David Matlack <dmatlack@google.com> Link: https://lore.kernel.org/r/20260114-map-mmio-test-v3-2-44e036d95e64@fb.com Signed-off-by: Alex Williamson <alex@shazbot.org>
2026-01-19vfio: selftests: Centralize IOMMU mode name definitionsAlex Mastro
Replace scattered string literals with MODE_* macros in iommu.h. This provides a single source of truth for IOMMU mode name strings. Signed-off-by: Alex Mastro <amastro@fb.com> Reviewed-by: David Matlack <dmatlack@google.com> Tested-by: David Matlack <dmatlack@google.com> Link: https://lore.kernel.org/r/20260114-map-mmio-test-v3-1-44e036d95e64@fb.com Signed-off-by: Alex Williamson <alex@shazbot.org>
2026-01-19selftests: add dm-verity keyring selftestsChristian Brauner
Add selftests that verify the keyring behaves correctly. For simplicity this works with dm-verity as a module. Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2026-01-19selftests/x86: Clean up sysret_rip coding styleUYeol Jo
Tidy up sysret_rip style (cast spacing, main(void), const placement). No functional change intended. Signed-off-by: UYeol Jo <jouyeol8739@gmail.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://patch.msgid.link/20260111210126.74752-1-jouyeol8739@gmail.com
2026-01-19selftests: ALSA: Remove unused variable in utimer-testLeeYongjun
The variable 'i' in wrong_timers_test() is declared but never used. This was detected by Cppcheck static analysis. tools/testing/selftests/alsa/utimer-test.c:144:9: style: Unused variable: i [unusedVariable] Remove it to clean up the code and silence the warning. Signed-off-by: LeeYongjun <jun85566@gmail.com> Link: https://patch.msgid.link/20260118065510.29644-1-jun85566@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2026-07-10 11:37:29 +0000