summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2024-02-05selftests/bpf: Remove flaky test_btf_id testYonghong Song
commit 56925f389e152dcb8d093435d43b78a310539c23 upstream. With previous patch, one of subtests in test_btf_id becomes flaky and may fail. The following is a failing example: Error: #26 btf Error: #26/174 btf/BTF ID Error: #26/174 btf/BTF ID btf_raw_create:PASS:check 0 nsec btf_raw_create:PASS:check 0 nsec test_btf_id:PASS:check 0 nsec ... test_btf_id:PASS:check 0 nsec test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1 The test tries to prove a btf_id not available after the map is closed. But btf_id is freed only after workqueue and a rcu grace period, compared to previous case just after a rcu grade period. Depending on system workload, workqueue could take quite some time to execute function bpf_map_free_deferred() which may cause the test failure. Instead of adding arbitrary delays, let us remove the logic to check btf_id availability after map is closed. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-05selftests: net: enable some more knobsPaolo Abeni
[ Upstream commit c15a729c9d45aa142fb01a3afee822ab1f0e62a8 ] The rtnetlink tests require additional options currently off by default. Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test") Fixes: 5e596ee171ba ("selftests: add xfrm state-policy-monitor to rtnetlink.sh") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/9048ca58e49b962f35dba1dfb2beaf3dab3e0411.1706723341.git.pabeni@redhat.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: add missing config for NF_TARGET_TTLJakub Kicinski
[ Upstream commit 1939f738c73dfdb8389839bdc9624c765e3326e6 ] amt test uses the TTL iptables module: ip netns exec "${RELAY}" iptables -t mangle -I PREROUTING \ -d 239.0.0.1 -j TTL --ttl-set 2 Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Link: https://lore.kernel.org/r/20240131165605.4051645-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: bonding: Check initial stateBenjamin Poirier
[ Upstream commit 8cc063ae1b3dbe416ce62a15d49af4c2314b45fe ] The purpose of the test_LAG_cleanup() function is to check that some hardware addresses are removed from underlying devices after they have been unenslaved. The test function simply checks that those addresses are not present at the end. However, if the addresses were never added to begin with due to some error in device setup, the test function currently passes. This is a false positive since in that situation the test did not actually exercise the intended functionality. Add a check that the expected addresses are indeed present after device setup. This makes the test function more robust. I noticed this problem when running the team/dev_addr_lists.sh test on a system without support for dummy and ipv6: tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh Error: Unknown device type. Error: Unknown device type. This program is not intended to be run as root. RTNETLINK answers: Operation not supported TEST: team cleanup mode lacp [ OK ] Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: team: Add missing config optionsBenjamin Poirier
[ Upstream commit 7b6fb3050d8f5e2b6858eef344e47ac1f5442827 ] Similar to commit dd2d40acdbb2 ("selftests: bonding: Add more missing config options"), add more networking-specific config options which are needed for team device tests. For testing, I used the minimal config generated by virtme-ng and I added the options in the config file. Afterwards, the team device test passed. Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: don't access /dev/stdout in pmtu.shPaolo Abeni
[ Upstream commit bc0970d5ac1d1317e212bdf55533935ecb6ae95c ] When running the pmtu.sh via the kselftest infra, accessing /dev/stdout gives unexpected results: # dd: failed to open '/dev/stdout': Device or resource busy # TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL] Let dd use directly the standard output to fix the above: # TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ] Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: fix available tunnels detectionPaolo Abeni
[ Upstream commit e4e4b6d568d2549583cbda3f8ce567e586cb05da ] The pmtu.sh test tries to detect the tunnel protocols available in the running kernel and properly skip the unsupported cases. In a few more complex setup, such detection is unsuccessful, as the script currently ignores some intermediate error code at setup time. Before: # which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin) # TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL] # PMTU exception wasn't created after creating tunnel exceeding link layer MTU # ./pmtu.sh: line 931: kill: (7543) - No such process # ./pmtu.sh: line 931: kill: (7544) - No such process After: # xfrm4 not supported # TEST: vti4: PMTU exceptions [SKIP] Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/cab10e75fda618e6fff8c595b632f47db58b9309.1706635101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: add missing config for pmtu.sh testsPaolo Abeni
[ Upstream commit f7c25d8e17dd759d97ca093faf92eeb7da7b3890 ] The mentioned test uses a few Kconfig still missing the net config, add them. Before: # Error: Specified qdisc kind is unknown. # Error: Specified qdisc kind is unknown. # Error: Qdisc not classful. # We have an error talking to the kernel # Error: Qdisc not classful. # We have an error talking to the kernel # policy_routing not supported # TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [SKIP] After: # TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ] Fixes: ec730c3e1f0e ("selftest: net: Test IPv4 PMTU exceptions with DSCP and ECN") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/8d27bf6762a5c7b3acc457d6e6872c533040f9c1.1706635101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: add missing config for nftables-backed iptablesJakub Kicinski
[ Upstream commit 59c93583491ab15db109f9902524d241c4fa4c0b ] Modern OSes use iptables implementation with nf_tables as a backend, e.g.: $ iptables -V iptables v1.8.8 (nf_tables) Pablo points out that we need CONFIG_NFT_COMPAT to make that work, otherwise we see a lot of: Warning: Extension DNAT revision 0 not supported, missing kernel module? with DNAT being just an example here, other modules we need include udp, TTL, length etc. Link: https://lore.kernel.org/r/20240126201308.2903602-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: f7c25d8e17dd ("selftests: net: add missing config for pmtu.sh tests") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: add missing config for GENEVEMatthias May
[ Upstream commit c9ec85153fea6873c52ed4f5055c87263f1b54f9 ] l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl for GRETAP, VXLAN and GENEVE. Before testing it checks if the required module is available and if not skips the tests accordingly. Currently only GRETAP and VXLAN are tested because the GENEVE module is missing. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by: Matthias May <matthias.may@westermo.com> Link: https://lore.kernel.org/r/20240130101157.196006-1-matthias.may@westermo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: Add missing matchall classifierIdo Schimmel
[ Upstream commit b40f873a7c80dbafbb6f4a7a569f2dcaf969d283 ] One of the test cases in the test_bridge_backup_port.sh selftest relies on a matchall classifier to drop unrelated traffic so that the Tx drop counter on the VXLAN device will only be incremented as a result of traffic generated by the test. However, the configuration option for the matchall classifier is missing from the configuration file which might explain the failures we see in the netdev CI [1]. Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file. [1] # Backup nexthop ID - invalid IDs # ------------------------------- [...] # TEST: Forwarding out of vx0 [ OK ] # TEST: No forwarding using backup nexthop ID [ OK ] # TEST: Tx drop increased [FAIL] # TEST: IPv6 address family nexthop as backup nexthop [ OK ] # TEST: No forwarding out of swp1 [ OK ] # TEST: Forwarding out of vx0 [ OK ] # TEST: No forwarding using backup nexthop ID [ OK ] # TEST: Tx drop increased [FAIL] [...] Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240129123703.1857843-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: give more time for GRO aggregationPaolo Abeni
[ Upstream commit 89abe628375301fedb68770644df845d49018d8b ] The gro.sh test-case relay on the gro_flush_timeout to ensure that all the segments belonging to any given batch are properly aggregated. The other end, the sender is a user-space program transmitting each packet with a separate write syscall. A busy host and/or stracing the sender program can make the relevant segments reach the GRO engine after the flush timeout triggers. Give the GRO flush timeout more slack, to avoid sporadic self-tests failures. Fixes: 9af771d2ec04 ("selftests/net: allow GRO coalesce test on veth") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Tested-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/bffec2beab3a5672dd13ecabe4fad81d2155b367.1706206101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: add missing required classifierPaolo Abeni
[ Upstream commit d3cb3b0088ca92082e2bebc40cc6894a632173e2 ] the udpgro_fraglist self-test uses the BPF classifiers, but the current net self-test configuration does not include it, causing CI failures: # selftests: net: udpgro_frglist.sh # ipv6 # tcp - over veth touching data # -l 4 -6 -D 2001:db8::1 -t rx -4 -t # Error: TC classifier not found. # We have an error talking to the kernel # Error: TC classifier not found. # We have an error talking to the kernel Add the missing knob. Fixes: edae34a3ed92 ("selftests net: add UDP GRO fraglist + bpf self-tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/7c3643763b331e9a400e1874fe089193c99a1c3f.1706170897.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: add missing config for big tcp testsPaolo Abeni
[ Upstream commit fcf67d82b8b878bdd95145382be43927bce07ec6 ] The big_tcp test-case requires a few kernel knobs currently not specified in the net selftests config, causing the following failure: # selftests: net: big_tcp.sh # Error: Failed to load TC action module. # We have an error talking to the kernel ... # Testing for BIG TCP: # CLI GSO | GW GRO | GW GSO | SER GRO # ./big_tcp.sh: line 107: test: !=: unary operator expected ... # on on on on : [FAIL_on_link1] Add the missing configs Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/all/21630ecea872fea13f071342ac64ef52a991a9b5.1706282943.git.pabeni@redhat.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: explicitly wait for listener readyPaolo Abeni
[ Upstream commit 4acffb66630a0e4800880baa61a54ef18047ccd3 ] The UDP GRO forwarding test still hard-code an arbitrary pause to wait for the UDP listener becoming ready in background. That causes sporadic failures depending on the host load. Replace the sleep with the existing helper waiting for the desired port being exposed. Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/4d58900fb09cef42749cfcf2ad7f4b91a97d225c.1706131762.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: remove dependency on ebpf testsPaolo Abeni
[ Upstream commit 98cb12eb52a780e682bea8372fdb2912c08132dd ] Several net tests requires an XDP program build under the ebpf directory, and error out if such program is not available. That makes running successful net test hard, let's duplicate into the net dir the [very small] program, re-using the existing rules to build it, and finally dropping the bogus dependency. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/28e7af7c031557f691dc8045ee41dd549dd5e74c.1706131762.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 4acffb66630a ("selftests: net: explicitly wait for listener ready") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/sgx: Fix linker script assertsJo Van Bulck
[ Upstream commit 9fd552ee32c6c1e27c125016b87d295bea6faea7 ] DEFINED only considers symbols, not section names. Hence, replace the check for .got.plt with the _GLOBAL_OFFSET_TABLE_ symbol and remove other (non-essential) asserts. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-10-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/bpf: fix compiler warnings in RELEASE=1 modeAndrii Nakryiko
[ Upstream commit 62d9a969f4a95219c757831e9ad66cd4dd9edee5 ] When compiling BPF selftests with RELEASE=1, we get two new warnings, which are treated as errors. Fix them. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20231212225343.1723081-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05bpf: Fix a few selftest failures due to llvm18 changeYonghong Song
[ Upstream commit b16904fd9f01b580db357ef2b1cc9e86d89576c2 ] With latest upstream llvm18, the following test cases failed: $ ./test_progs -j #13/2 bpf_cookie/multi_kprobe_link_api:FAIL #13/3 bpf_cookie/multi_kprobe_attach_api:FAIL #13 bpf_cookie:FAIL #77 fentry_fexit:FAIL #78/1 fentry_test/fentry:FAIL #78 fentry_test:FAIL #82/1 fexit_test/fexit:FAIL #82 fexit_test:FAIL #112/1 kprobe_multi_test/skel_api:FAIL #112/2 kprobe_multi_test/link_api_addrs:FAIL [...] #112 kprobe_multi_test:FAIL #356/17 test_global_funcs/global_func17:FAIL #356 test_global_funcs:FAIL Further analysis shows llvm upstream patch [1] is responsible for the above failures. For example, for function bpf_fentry_test7() in net/bpf/test_run.c, without [1], the asm code is: 0000000000000400 <bpf_fentry_test7>: 400: f3 0f 1e fa endbr64 404: e8 00 00 00 00 callq 0x409 <bpf_fentry_test7+0x9> 409: 48 89 f8 movq %rdi, %rax 40c: c3 retq 40d: 0f 1f 00 nopl (%rax) ... and with [1], the asm code is: 0000000000005d20 <bpf_fentry_test7.specialized.1>: 5d20: e8 00 00 00 00 callq 0x5d25 <bpf_fentry_test7.specialized.1+0x5> 5d25: c3 retq ... and <bpf_fentry_test7.specialized.1> is called instead of <bpf_fentry_test7> and this caused test failures for #13/#77 etc. except #356. For test case #356/17, with [1] (progs/test_global_func17.c)), the main prog looks like: 0000000000000000 <global_func17>: 0: b4 00 00 00 2a 00 00 00 w0 = 0x2a 1: 95 00 00 00 00 00 00 00 exit ... which passed verification while the test itself expects a verification failure. Let us add 'barrier_var' style asm code in both places to prevent function specialization which caused selftests failure. [1] https://github.com/llvm/llvm-project/pull/72903 Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231127050342.1945270-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/bpf: Fix issues in setup_classid_environment()Yafang Shao
[ Upstream commit 4849775587844e44d215289c425bcd70f315efe7 ] If the net_cls subsystem is already mounted, attempting to mount it again in setup_classid_environment() will result in a failure with the error code EBUSY. Despite this, tmpfs will have been successfully mounted at /sys/fs/cgroup/net_cls. Consequently, the /sys/fs/cgroup/net_cls directory will be empty, causing subsequent setup operations to fail. Here's an error log excerpt illustrating the issue when net_cls has already been mounted at /sys/fs/cgroup/net_cls prior to running setup_classid_environment(): - Before that change $ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2 test_cgroup_v1v2:PASS:server_fd 0 nsec test_cgroup_v1v2:PASS:client_fd 0 nsec test_cgroup_v1v2:PASS:cgroup_fd 0 nsec test_cgroup_v1v2:PASS:server_fd 0 nsec run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec (cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs (cgroup_helpers.c:540: errno: No such file or directory) Opening cgroup classid: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/net_cls.classid run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec (cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/cgroup.procs run_test:FAIL:join_classid unexpected error: 1 (errno 2) test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 2) (cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs #44 cgroup_v1v2:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED - After that change $ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2 #44 cgroup_v1v2:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20231111090034.4248-3-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/bpf: Fix pyperf180 compilation failure with clang18Yonghong Song
[ Upstream commit 100888fb6d8a185866b1520031ee7e3182b173de ] With latest clang18 (main branch of llvm-project repo), when building bpf selftests, [~/work/bpf-next (master)]$ make -C tools/testing/selftests/bpf LLVM=1 -j The following compilation error happens: fatal error: error in backend: Branch target out of insn range ... Stack dump: 0. Program arguments: clang -g -Wall -Werror -D__TARGET_ARCH_x86 -mlittle-endian -I/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/include -I/home/yhs/work/bpf-next/tools/testing/selftests/bpf -I/home/yhs/work/bpf-next/tools/include/uapi -I/home/yhs/work/bpf-next/tools/testing/selftests/usr/include -idirafter /home/yhs/work/llvm-project/llvm/build.18/install/lib/clang/18/include -idirafter /usr/local/include -idirafter /usr/include -Wno-compare-distinct-pointer-types -DENABLE_ATOMICS_TESTS -O2 --target=bpf -c progs/pyperf180.c -mcpu=v3 -o /home/yhs/work/bpf-next/tools/testing/selftests/bpf/pyperf180.bpf.o 1. <eof> parser at end of file 2. Code generation ... The compilation failure only happens to cpu=v2 and cpu=v3. cpu=v4 is okay since cpu=v4 supports 32-bit branch target offset. The above failure is due to upstream llvm patch [1] where some inlining behavior are changed in clang18. To workaround the issue, previously all 180 loop iterations are fully unrolled. The bpf macro __BPF_CPU_VERSION__ (implemented in clang18 recently) is used to avoid unrolling changes if cpu=v4. If __BPF_CPU_VERSION__ is not available and the compiler is clang18, the unrollng amount is unconditionally reduced. [1] https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/bpf: satisfy compiler by having explicit return in btf testAndrii Nakryiko
[ Upstream commit f4c7e887324f5776eef6e6e47a90e0ac8058a7a8 ] Some compilers complain about get_pprint_mapv_size() not returning value in some code paths. Fix with explicit return. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231102033759.2541186-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/bpf: fix RELEASE=1 build for tc_optsAndrii Nakryiko
[ Upstream commit 2b62aa59d02ed281fa4fc218df3ca91b773e1e62 ] Compiler complains about malloc(). We also don't need to dynamically allocate anything, so make the life easier by using statically sized buffer. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231102033759.2541186-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05kunit: tool: fix parsing of test attributesRae Moar
[ Upstream commit 8ae27bc7fff4ef467a7964821a6cedb34a05d3b2 ] Add parsing of attributes as diagnostic data. Fixes issue with test plan being parsed incorrectly as diagnostic data when located after suite-level attributes. Note that if there does not exist a test plan line, the diagnostic lines between the suite header and the first result will be saved in the suite log rather than the first test case log. Signed-off-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/nolibc: fix testcase status alignmentThomas Weißschuh
[ Upstream commit 07f679b50252dc9e3d0c19aca5801f82c230c527 ] Center-align all possible status reports. Before OK and FAIL were center-aligned in relation to each other but SKIPPED and FAILED would be left-aligned. Before: 7 environ_addr = <0x7fffef3e7c50> [OK] 8 environ_envp = <0x7fffef3e7c58> [FAIL] 9 environ_auxv [SKIPPED] 10 environ_total [SKIPPED] 11 environ_HOME = <0x7fffef3e99bd> [OK] 12 auxv_addr [SKIPPED] 13 auxv_AT_UID = 1000 [OK] After: 7 environ_addr = <0x7ffff13b00a0> [OK] 8 environ_envp = <0x7ffff13b00a8> [FAIL] 9 environ_auxv [SKIPPED] 10 environ_total [SKIPPED] 11 environ_HOME = <0x7ffff13b19bd> [OK] 12 auxv_addr [SKIPPED] 13 auxv_AT_UID = 1000 [OK] Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-31selftests: bonding: do not test arp/ns target with mode balance-alb/tlbHangbin Liu
[ Upstream commit a2933a8759a62269754e54733d993b19de870e84 ] The prio_arp/ns tests hard code the mode to active-backup. At the same time, The balance-alb/tlb modes do not support arp/ns target. So remove the prio_arp/ns tests from the loop and only test active-backup mode. Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com> Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/ Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20240123075917.1576360-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-31selftests: netdevsim: fix the udp_tunnel_nic testJakub Kicinski
[ Upstream commit 0879020a7817e7ce636372c016b4528f541c9f4d ] This test is missing a whole bunch of checks for interface renaming and one ifup. Presumably it was only used on a system with renaming disabled and NetworkManager running. Fixes: 91f430b2c49d ("selftests: net: add a test for UDP tunnel info infra") Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240123060529.1033912-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-31selftests: net: fix rps_default_mask with >32 CPUsJakub Kicinski
[ Upstream commit 0719b5338a0cbe80d1637a5fb03d8141b5bfc7a1 ] If there is more than 32 cpus the bitmask will start to contain commas, leading to: ./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected Remove the commas, bash doesn't interpret leading zeroes as oct so that should be good enough. Switch to bash, Simon reports that not all shells support this type of substitution. Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240122195815.638997-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-31selftests: fill in some missing configs for netJakub Kicinski
[ Upstream commit 04fe7c5029cbdbcdb28917f09a958d939a8f19f7 ] We are missing a lot of config options from net selftests, it seems: tun/tap: CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP fib_tests: CONFIG_NET_SCH_FQ_CODEL l2tp: CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH sctp-vrf: CONFIG_INET_DIAG txtimestamp: CONFIG_NET_CLS_U32 vxlan_mdb: CONFIG_BRIDGE_VLAN_FILTERING gre_gso: CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE srv6_end_dt*_l3vpn: CONFIG_IPV6_SEG6_LWTUNNEL ip_local_port_range: CONFIG_MPTCP fib_test: CONFIG_NET_CLS_BASIC rtnetlink: CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE CONFIG_NET_IPGRE, CONFIG_BONDING fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING vxlan_mdb: CONFIG_NET_ACT_GACT tls: CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305 psample: CONFIG_PSAMPLE fcnal: CONFIG_TCP_MD5SIG Try to add them in a semi-alphabetical order. Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test") Fixes: c12e0d5f267d ("self-tests: introduce self-tests for RPS default mask") Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE") Link: https://lore.kernel.org/r/20240122203528.672004-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-31selftest: Don't reuse port for SO_INCOMING_CPU test.Kuniyuki Iwashima
[ Upstream commit 97de5a15edf2d22184f5ff588656030bbb7fa358 ] Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to fire somewhat randomly. # # RUN so_incoming_cpu.before_reuseport.test3 ... # # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0) # # test3: Test terminated by assertion # # FAIL so_incoming_cpu.before_reuseport.test3 # not ok 3 so_incoming_cpu.before_reuseport.test3 When the test failed, not-yet-accepted CLOSE_WAIT sockets received SYN with a "challenging" SEQ number, which was sent from an unexpected CPU that did not create the receiver. The test basically does: 1. for each cpu: 1-1. create a server 1-2. set SO_INCOMING_CPU 2. for each cpu: 2-1. set cpu affinity 2-2. create some clients 2-3. let clients connect() to the server on the same cpu 2-4. close() clients 3. for each server: 3-1. accept() all child sockets 3-2. check if all children have the same SO_INCOMING_CPU with the server The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse. In a loop of 2., close() changed the client state to FIN_WAIT_2, and the peer transitioned to CLOSE_WAIT. In another loop of 2., connect() happened to select the same port of the FIN_WAIT_2 socket, and it was reused as the default value of net.ipv4.tcp_tw_reuse is 2. As a result, the new client sent SYN to the CLOSE_WAIT socket from a different CPU, and the receiver's sk_incoming_cpu was overwritten with unexpected CPU ID. Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket responded with Challenge ACK. The new client properly returned RST and effectively killed the CLOSE_WAIT socket. This way, all clients were created successfully, but the error was detected later by 3-2., ASSERT_EQ(cpu, i). To avoid the failure, let's make sure that (i) the number of clients is less than the number of available ports and (ii) such reuse never happens. Fixes: 6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Tested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-31selftests: bonding: Increase timeout to 1200sBenjamin Poirier
[ Upstream commit b01f15a7571b7aa222458bc9bf26ab59bd84e384 ] When tests are run by runner.sh, bond_options.sh gets killed before it can complete: make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding" [...] # timeout set to 120 # selftests: drivers/net/bonding: bond_options.sh # TEST: prio (active-backup miimon primary_reselect 0) [ OK ] # TEST: prio (active-backup miimon primary_reselect 1) [ OK ] # TEST: prio (active-backup miimon primary_reselect 2) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ] # not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds This test includes many sleep statements, at least some of which are related to timers in the operation of the bonding driver itself. Increase the test timeout to allow the test to complete. I ran the test in slightly different VMs (including one without HW virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and 13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s. Fixes: 42a8d4aaea84 ("selftests: bonding: add bonding prio option test") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#t Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-31selftests: mm: hugepage-vmemmap fails on 64K page size systemsDonet Tom
commit 00bcfcd47a52f50f07a2e88d730d7931384cb073 upstream. The kernel sefltest mm/hugepage-vmemmap fails on architectures which has different page size other than 4K. In hugepage-vmemmap page size used is 4k so the pfn calculation will go wrong on systems which has different page size .The length of MAP_HUGETLB memory must be hugepage aligned but in hugepage-vmemmap map length is 2M so this will not get aligned if the system has differnet hugepage size. Added psize() to get the page size and default_huge_page_size() to get the default hugepage size at run time, hugepage-vmemmap test pass on powerpc with 64K page size and x86 with 4K page size. Result on powerpc without patch (page size 64K) *# ./hugepage-vmemmap Returned address is 0x7effff000000 whose pfn is 0 Head page flags (100000000) is invalid check_page_flags: Invalid argument *# Result on powerpc with patch (page size 64K) *# ./hugepage-vmemmap Returned address is 0x7effff000000 whose pfn is 600 *# Result on x86 with patch (page size 4K) *# ./hugepage-vmemmap Returned address is 0x7fc7c2c00000 whose pfn is 1dac00 *# Link: https://lkml.kernel.org/r/3b3a3ae37ba21218481c482a872bbf7526031600.1704865754.git.donettom@linux.vnet.ibm.com Fixes: b147c89cd429 ("selftests: vm: add a hugetlb test case") Signed-off-by: Donet Tom <donettom@linux.vnet.ibm.com> Reported-by: Geetika Moolchandani <geetika@linux.ibm.com> Tested-by: Geetika Moolchandani <geetika@linux.ibm.com> Acked-by: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-31RISC-V: selftests: cbo: Ensure asm operands match constraintsAndrew Jones
commit 0de65288d75ff96c30e216557d979fb9342c4323 upstream. The 'i' constraint expects a constant operand, which fn and its constant derivative MK_CBO(fn) are, but passing fn through a function as a parameter and using a local variable for MK_CBO(fn) allow the compiler to lose sight of that when no optimization is done. Use a macro instead of a function and skip the local variable to ensure the compiler uses constants, matching the asm constraints. Reported-by: Yunhui Cui <cuiyunhui@bytedance.com> Closes: https://lore.kernel.org/all/20240117082514.42967-1-cuiyunhui@bytedance.com Fixes: a29e2a48afe3 ("RISC-V: selftests: Add CBO tests") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20240117130933.57514-2-ajones@ventanamicro.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-25selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanesAmit Cohen
[ Upstream commit b34f4de6d30cbaa8fed905a5080b6eace8c84dc7 ] 'qos_pfc' test checks PFC behavior. The idea is to limit the traffic using a shaper somewhere in the flow of the packets. In this area, the buffer is smaller than the buffer at the beginning of the flow, so it fills up until there is no more space left. The test configures there PFC which is supposed to notice that the headroom is filling up and send PFC Xoff to indicate the transmitter to stop sending traffic for the priorities sharing this PG. The Xon/Xoff threshold is auto-configured and always equal to 2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet, traffic will keep arriving until the transmitter receives and processes the PFC packet. This amount of traffic is known as the PFC delay allowance. Currently the buffer for the delay traffic is configured as 100KB. The MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB. This allows 80KB extra to be stored in this buffer. 8-lane ports use two buffers among which the configured buffer is split, the Xoff threshold then applies to each buffer in parallel. The test does not take into account the behavior of 8-lane ports, when the ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes, packets are dropped and the test fails. Check if the relevant ports use 8 lanes, in such case double the size of the buffer, as the headroom is split half-half. Cc: Shuah Khan <shuah@kernel.org> Fixes: bfa804784e32 ("selftests: mlxsw: Add a PFC test") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25mlxsw: spectrum_acl_tcam: Fix stack corruptionIdo Schimmel
[ Upstream commit 483ae90d8f976f8339cf81066312e1329f2d3706 ] When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 [...] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Reported-by: Orel Hagag <orelh@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failureAmit Cohen
[ Upstream commit 6d6eeabcfaba2fcadf5443b575789ea606f9de83 ] Lately, a bug was found when many TC filters are added - at some point, several bugs are printed to dmesg [1] and the switch is crashed with segmentation fault. The issue starts when gen_pool_free() fails because of unexpected behavior - a try to free memory which is already freed, this leads to BUG() call which crashes the switch and makes many other bugs. Trying to track down the unexpected behavior led to a bug in eRP code. The function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated index, sets the value and returns an error code. When gen_pool_alloc() fails it returns address 0, we track it and return -ENOBUFS outside, BUT the call for gen_pool_alloc() already override the index in erp_table structure. This is a problem when such allocation is done as part of table expansion. This is not a new table, which will not be used in case of allocation failure. We try to expand eRP table and override the current index (non-zero) with zero. Then, it leads to an unexpected behavior when address 0 is freed twice. Note that address 0 is valid in erp_table->base_index and indeed other tables use it. gen_pool_alloc() fails in case that there is no space left in the pre-allocated pool, in our case, the pool is limited to ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max erp entries are required, we exceed the limit and return an error, this error leads to "Failed to migrate vregion" print. Fix this by changing erp_table->base_index only in case of a successful allocation. Add a test case for such a scenario. Without this fix it causes segmentation fault: $ TESTS="max_erp_entries_test" ./tc_flower.sh ./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null [1]: kernel BUG at lib/genalloc.c:508! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1 Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021 RIP: 0010:gen_pool_free_owner+0xc9/0xe0 ... Call Trace: <TASK> __mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum] objagg_obj_root_destroy+0x18/0x80 [objagg] objagg_obj_destroy+0x12c/0x130 [objagg] mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum] mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum] mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum] mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum] tc_setup_cb_destroy+0xc1/0x180 fl_hw_destroy_filter+0x94/0xc0 [cls_flower] __fl_delete+0x1ac/0x1c0 [cls_flower] fl_destroy+0xc2/0x150 [cls_flower] tcf_proto_destroy+0x1a/0xa0 ... mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion Fixes: f465261aa105 ("mlxsw: spectrum_acl: Implement common eRP core") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests: bonding: Change script interpreterBenjamin Poirier
[ Upstream commit c2518da8e6b0e248cfff1d4b6682e14020bd4d3f ] The tests changed by this patch, as well as the scripts they source, use features which are not part of POSIX sh (ex. 'source' and 'local'). As a result, these tests fail when /bin/sh is dash such as on Debian. Change the interpreter to bash so that these tests can run successfully. Fixes: d43eff0b85ae ("selftests: bonding: up/down delay w/ slave link flapping") Tested-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/sgx: Skip non X86_64 platformZhao Mengmeng
[ Upstream commit 981cf568a8644161c2f15c02278ebc2834b51ba6 ] When building whole selftests on arm64, rsync gives an erorr about sgx: rsync: [sender] link_stat "/root/linux-next/tools/testing/selftests/sgx/test_encl.elf" failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1327) [sender=3.2.5] The root casue is sgx only used on X86_64, and shall be skipped on other platforms. Fix this by moving TEST_CUSTOM_PROGS and TEST_FILES inside the if check, then the build result will be "Skipping non-existent dir: sgx". Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231206025605.3965302-1-zhaomzhao%40126.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/sgx: Include memory clobber for inline asm in test enclaveJo Van Bulck
[ Upstream commit 853a57a43ebdb8c024160c1a0990bae85f4bcc2f ] Add the "memory" clobber to the EMODPE and EACCEPT asm blocks to tell the compiler the assembly code accesses to the secinfo struct. This ensures the compiler treats the asm block as a memory barrier and the write to secinfo will be visible to ENCLU. Fixes: 20404a808593 ("selftests/sgx: Add test for EPCM permission changes") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-4-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entryJo Van Bulck
[ Upstream commit b84fc2e0139ba4b23b8039bd7cfd242894fe8f8b ] Ensure sym_tab and sym_names are zero-initialized and add an early-out condition in the unlikely (erroneous) case that the enclave ELF file would not contain a symbol table. This addresses -Werror=maybe-uninitialized compiler warnings for gcc -O2. Fixes: 33c5aac3bf32 ("selftests/sgx: Test complete changing of page type flow") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-3-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/sgx: Fix uninitialized pointer dereference in error pathJo Van Bulck
[ Upstream commit 79eba8c924f7decfa71ddf187d38cb9f5f2cd7b3 ] Ensure ctx is zero-initialized, such that the encl_measure function will not call EVP_MD_CTX_destroy with an uninitialized ctx pointer in case of an early error during key generation. Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/20231005153854.25566-2-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/bpf: Add assert for user stacks in test_task_stackJordan Rome
commit 727a92d62fd6a382b4c5972008e45667e707b0e4 upstream. This is a follow up to: commit b8e3a87a627b ("bpf: Add crosstask check to __bpf_get_stack"). This test ensures that the task iterator only gets a single user stack (for the current task). Signed-off-by: Jordan Rome <linux@jordanrome.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20231112023010.144675-1-linux@jordanrome.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-25kselftest/alsa - conf: Stringify the printed errno in sysfs_get()Mirsad Todorovac
[ Upstream commit fd38dd6abda589a8771e7872e4dea28c99c6a6ef ] GCC 13.2.0 reported the warning of the print format specifier: conf.c: In function ‘sysfs_get’: conf.c:181:72: warning: format ‘%s’ expects argument of type ‘char *’, \ but argument 3 has type ‘int’ [-Wformat=] 181 | ksft_exit_fail_msg("sysfs: unable to read value '%s': %s\n", | ~^ | | | char * | %d The fix passes strerror(errno) as it was intended, like in the sibling error exit message. Fixes: aba51cd0949ae ("selftests: alsa - add PCM test") Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-sound@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240107173704.937824-5-mirsad.todorovac@alu.unizg.hr Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25kselftest/alsa - mixer-test: Fix the print format specifier warningMirsad Todorovac
[ Upstream commit 3f47c1ebe5ca9c5883e596c7888dec4bec0176d8 ] The GCC 13.2.0 compiler issued the following warning: mixer-test.c: In function ‘ctl_value_index_valid’: mixer-test.c:322:79: warning: format ‘%lld’ expects argument of type ‘long long int’, \ but argument 5 has type ‘long int’ [-Wformat=] 322 | ksft_print_msg("%s.%d value %lld more than maximum %lld\n", | ~~~^ | | | long long int | %ld 323 | ctl->name, index, int64_val, 324 | snd_ctl_elem_info_get_max(ctl->info)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | long int Fixing the format specifier as advised by the compiler suggestion removes the warning. Fixes: 3f48b137d88e7 ("kselftest: alsa: Factor out check that values meet constraints") Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-sound@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240107173704.937824-3-mirsad.todorovac@alu.unizg.hr Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25kselftest/alsa - mixer-test: fix the number of parameters to ↵Mirsad Todorovac
ksft_exit_fail_msg() [ Upstream commit 8c51c13dc63d46e754c44215eabc0890a8bd9bfb ] Minor fix in the number of arguments to error reporting function in the test program as reported by GCC 13.2.0 warning. mixer-test.c: In function ‘find_controls’: mixer-test.c:169:44: warning: too many arguments for format [-Wformat-extra-args] 169 | ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The number of arguments in call to ksft_exit_fail_msg() doesn't correspond to the format specifiers, so this is adjusted resembling the sibling calls to the error function. Fixes: b1446bda56456 ("kselftest: alsa: Check for event generation when we write to controls") Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-sound@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240107173704.937824-2-mirsad.todorovac@alu.unizg.hr Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/net: fix grep checking for fib_nexthop_multiprefixHangbin Liu
[ Upstream commit a33e9da3470499e9ff476138f271fb52d6bfe767 ] When running fib_nexthop_multiprefix test I saw all IPv6 test failed. e.g. ]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL] With -v it shows COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1 PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300 --- 2001:db8:101::1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Route get 2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium Searching for: 2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300 The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will not put RTA_SRC info. After fix: ]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ] Fixes: 735ab2f65dce ("selftests: Add test with multiple prefixes using single nexthop") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/xsk: Fix for SEND_RECEIVE_UNALIGNED testTushar Vyavahare
[ Upstream commit 2e1d6a04116c373fbd25beddba4267178535bc60 ] Fix test broken by shared umem test and framework enhancement commit. Correct the current implementation of pkt_stream_replace_half() by ensuring that nb_valid_entries are not set to half, as this is not true for all the tests. Ensure that the expected value for valid_entries for the SEND_RECEIVE_UNALIGNED test equals the total number of packets sent, which is 4096. Create a new function called pkt_stream_pkt_set() that allows for packet modification to meet specific requirements while ensuring the accurate maintenance of the valid packet count to prevent inconsistencies in packet tracking. Fixes: 6d198a89c004 ("selftests/xsk: Add a test for shared umem feature") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20231214130007.33281-1-tushar.vyavahare@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/bpf: Relax time_tai test for equal timestamps in tai_forwardYiFei Zhu
[ Upstream commit e1ba7f64b192f083b4423644be03bb9e3dc8ae84 ] We're observing test flakiness on an arm64 platform which might not have timestamps as precise as x86. The test log looks like: test_time_tai:PASS:tai_open 0 nsec test_time_tai:PASS:test_run 0 nsec test_time_tai:PASS:tai_ts1 0 nsec test_time_tai:PASS:tai_ts2 0 nsec test_time_tai:FAIL:tai_forward unexpected tai_forward: actual 1702348135471494160 <= expected 1702348135471494160 test_time_tai:PASS:tai_gettime 0 nsec test_time_tai:PASS:tai_future_ts1 0 nsec test_time_tai:PASS:tai_future_ts2 0 nsec test_time_tai:PASS:tai_range_ts1 0 nsec test_time_tai:PASS:tai_range_ts2 0 nsec #199 time_tai:FAIL This patch changes ASSERT_GT to ASSERT_GE in the tai_forward assertion so that equal timestamps are permitted. Fixes: 64e15820b987 ("selftests/bpf: Add BPF-helper test for CLOCK_TAI access") Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231212182911.3784108-1-zhuyifei@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25bpf: Fix accesses to uninit stack slotsAndrei Matei
[ Upstream commit 6b4a64bafd107e521c01eec3453ce94a3fb38529 ] Privileged programs are supposed to be able to read uninitialized stack memory (ever since 6715df8d5) but, before this patch, these accesses were permitted inconsistently. In particular, accesses were permitted above state->allocated_stack, but not below it. In other words, if the stack was already "large enough", the access was permitted, but otherwise the access was rejected instead of being allowed to "grow the stack". This undesired rejection was happening in two places: - in check_stack_slot_within_bounds() - in check_stack_range_initialized() This patch arranges for these accesses to be permitted. A bunch of tests that were relying on the old rejection had to change; all of them were changed to add also run unprivileged, in which case the old behavior persists. One tests couldn't be updated - global_func16 - because it can't run unprivileged for other reasons. This patch also fixes the tracking of the stack size for variable-offset reads. This second fix is bundled in the same commit as the first one because they're inter-related. Before this patch, writes to the stack using registers containing a variable offset (as opposed to registers with fixed, known values) were not properly contributing to the function's needed stack size. As a result, it was possible for a program to verify, but then to attempt to read out-of-bounds data at runtime because a too small stack had been allocated for it. Each function tracks the size of the stack it needs in bpf_subprog_info.stack_depth, which is maintained by update_stack_depth(). For regular memory accesses, check_mem_access() was calling update_state_depth() but it was passing in only the fixed part of the offset register, ignoring the variable offset. This was incorrect; the minimum possible value of that register should be used instead. This tracking is now fixed by centralizing the tracking of stack size in grow_stack_state(), and by lifting the calls to grow_stack_state() to check_stack_access_within_bounds() as suggested by Andrii. The code is now simpler and more convincingly tracks the correct maximum stack size. check_stack_range_initialized() can now rely on enough stack having been allocated for the access; this helps with the fix for the first issue. A few tests were changed to also check the stack depth computation. The one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv. Fixes: 01f810ace9ed3 ("bpf: Allow variable-offset stack access") Reported-by: Hao Sun <sunhao.th@gmail.com> Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231208032519.260451-3-andreimatei1@gmail.com Closes: https://lore.kernel.org/bpf/CABWLsev9g8UP_c3a=1qbuZUi20tGoUXoU07FPf-5FLvhOKOY+Q@mail.gmail.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/net: specify the interface when do arpingHangbin Liu
[ Upstream commit 7f770d28f2e5abfd442ad689ba1129dd66593529 ] When do arping, the interface need to be specified. Or we will get error: Interface "lo" is not ARPable. And the test failed. ]# ./arp_ndisc_untracked_subnets.sh TEST: test_arp: accept_arp=0 [ OK ] TEST: test_arp: accept_arp=1 [FAIL] TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL] After fix: ]# ./arp_ndisc_untracked_subnets.sh TEST: test_arp: accept_arp=0 [ OK ] TEST: test_arp: accept_arp=1 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ] Fixes: 0ea7b0a454ca ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-07-19 01:15:53 +0000